A Dynamic Model For Ice-Induced Vibration Of Structures

A dynamic model for the ice-induced vibration (IIV) of structures is developed in the present study. Ice properties have been taken into account, such as the discrete failure, the dependence of the crushing strength on the ice velocity, and the randomness of ice failure. The most important prediction of the model is to capture the resonant frequency lock-in, which is analog to that in the vortex-induced vibration. Based on the model, the mechanism of resonant IIV is discussed. It is found that the dependence of the ice crushing strength on the ice velocity plays an important role in the resonant frequency lock-in of IIV. In addition, an intermittent stochastic resonant vibration is simulated from the model. These predictions are supported by the laboratory and field observations reported. The present model is more productive than the previous models of IIV.

The use and economic benefits of fibres from sisal hemp (Agave sisalana) leaves as supporting ropes for fishing gear

Sisal hemp (Agave sisalana) leaves were harvested and processed using the beating and decomposition methods. The fibres obtained were washed, dried and finally spurned in to cordage of about 4mm diameter 39 pieces of ropes, each measuring 2 meters were altogether spurned. 30 pieces of these ropes were immersed in water for a period of 24 weeks, 6 were placed in a shaded and airily place and 3 were used for the head and footling of gillnet, sinker line of cast net and the main line of long line. Every other week, the ropes in water and air were tested for its breaking strength using an improved 50kg spring balance. At the end of the experiment, it was found the immersed ropes maintained a tensile strength of over 50kg/F for the first 18 weeks, thereafter; there was a gradual weekly reduction in the strength until the 23rd week when the tensile strength was less than 1kg/F. The cost benefit analysis showed that about 5,3146 tons processed fibers could be obtained fro 1ha. capable of being spenced in to 528300m of 4mm diameter cordage. This paper finally recommended the growth of sisal hemp plants by fisher folks so that there will be constant stock for intermittent harvesting for rope spurning

Diferencias fisiológicas entre futbolistas de categoría cadete y juvenil

Los objetivos de este estudio fueron analizar las diferencias en las características antropométricas, resistencia aeróbica, temperatura corporal y percepción subjetiva del esfuerzo en futbolistas de distintas categorías (cadete y juvenil), y examinar la relación existente entre las distintas variables analizadas. Para ello participaron 37 jóvenes futbolistas, 20 de ellos cadetes (15,12 ± 0,69 años) y 17 juveniles (16,94 ± 0,89 años). A los futbolistas se les midió la talla y la masa corporal, calculándose el índice de masa corporal (IMC). A su vez, para determinar su resistencia aeróbica, los jugadores realizaron el Yo-Yo Intermittent Recovery Level 1, registrándose la distancia total recorrida, la temperatura pre y post-test y la percepción subjetiva del esfuerzo (RPE). Los futbolistas de categoría juvenil obtuvieron mayores valores de masa corporal e IMC, obteniendo además mejores valores en el test de resistencia que los cadetes. Asimismo, se registraron diferencias en el RPEmus y RPEmus-TL, siendo mayor el de los juveniles en ambos casos. Para acabar, se observaron correlaciones altas entre los resultados del test de resistencia y el RPEres-TL, así como con el RPEmus-TL en los juveniles, mientras que en el caso de los cadetes solo correlacionó con el RPEres-TL. Se cree que dichas diferencias pueden ser debidas al mayor desarrollo muscular de los juveniles respecto a los cadetes, aunque se necesitan más estudios.

Plasma channeling by multiple short-pulse lasers

Channeling by a train of laser pulses into homogeneous and inhomogeneous plasmas is studied using particle-in-cell simulation. When the pulse duration and the interval between the successive pulses are appropriate, the laser pulse train can channel into the plasma deeper than a single long-pulse laser of similar peak intensity and total energy. The increased penetration distance can be attributed to the repeated actions of the ponderomotive force, the continuous between-pulse channel lengthening by the inertially evacuating ions, and the suppression of laser-driven plasma instabilities by the intermittent laser-energy cut-offs.

The structure and petrology of the Johnny Lyon Hills area, Cochise County, Arizona

The Johnny Lyon Hills area is located in Cochise County in southeastern Arizona. The rocks of the area include a central core of Lower pre-Cambrian igneous and metamorphic rocks surrounded by a complexly faulted and tilted section of Upper pre-Cambrian and Paleozoic strata. Limited exposures of Mesozoic and Tertiary sedimentary and volcanic rocks are present at the north end of the map area. Late Tertiary and Quaternary alluvium almost completely surrounds and overlaps upon the older rocks.

The older pre-Cambrian rocks include a section of more than 9000 feet of generally moderately metamorphosed graywackes, slates and conglomerates of the Pinal schist injected in zones by somewhat younger rnyolite sheets. The original sediments were deposited in a geosyncline whose extent probably included large parts of Arizona, New Mexico and west Texas. During the Mazatzal Revolution the Pinal schist was deformed into northeast-trending, steeply dipping and plunging structures and the entire local section was overturned steeply toward the northwest. The pre-Cambrian Johnny Lyon granodiorite was emplaced as a large epi-tectonic pluton which modified the metamorphic character of part of the Pinal schist. Larsen method determinations indicate an age of about 715 million years for this rock, which is about the minimum age compatible with the geologic relations.

The Laramide orogeny produced numerous major thrust faults in the area involving all rocks older than and including the Lower Cretaceous Bisbee group. Major compression from the southwest and subsequent superimposed thrusting from the southeast and east are indicated. Minimum thrust displacements of more than a mile are clear and the probable displacements are of much greater magnitude. The crystalline core behaved as a single structural unit and probably caused important local divergences from the regional pattern of northeast-trending compressive forces. The massif was rotated as a unit 40 degrees or more about a northwest-trending axis overturning the pre-Cambrian fold axes in the Pinal schist.

Swarms of Late Cretaceous(?) or Early Tertiary(?) lamprophyric dikes cross the Laramide structures and are probably related to the large Texas Canyon stock several miles southeast of the map area. Intermittent high angle faulting, both older and younger than the dikes, has continued since the Laramide orogeny and has been superimposed on the older structures. This steep faulting combined with the fundamental northwesterly Laramide structural grain to produce the northwesterly trends characteristic of the mountain ridges and valleys of the area.

Dendrites Inhibition in Rechargeable Lithium Metal Batteries

The specific high energy and power capacities of rechargeable lithium metal (Li⁰) batteries are ideally suited to portable devices and are valuable as storage units for intermittent renewable energy sources. Lithium, the lightest and most electropositive metal, would be the optimal anode material for rechargeable batteries if it were not for the fact that such devices fail unexpectedly by short-circuiting via the dendrites that grow across electrodes upon recharging. This phenomenon poses a major safety issue because it triggers a series of adverse events that start with overheating, potentially followed by the thermal decomposition and ultimately the ignition of the organic solvents used in such devices.

In this thesis, we developed experimental platform for monitoring and quantifying the dendrite populations grown in a Li battery prototype upon charging under various conditions. We explored the effects of pulse charging in the kHz range and temperature on dendrite growth, and also on loss capacity into detached “dead” lithium particles.

Simultaneously, we developed a computational framework for understanding the dynamics of dendrite propagation. The coarse-grained Monte Carlo model assisted us in the interpretation of pulsing experiments, whereas MD calculations provided insights into the mechanism of dendrites thermal relaxation. We also developed a computational framework for measuring the dead lithium crystals from the experimental images.

Observations on the distribution, daytime migrations and daily food intake rates of Chaoborus flavicans (Meigen) in the Goggausee [Translation from: Carinthia II 165(85), 184-190, 1975]

The Goggausee, in spite of its modest depth (Zmax = 12 metres), shows meromictic properties: autumn and spring circulation extend only to a depth of 8 metres. The water layers below about 10 metres are constantly oxygen-free, the critical zone with at least intermittent oxygen loss lies at a depth of between 6 and 10 metres. A limnological excursion in May 1974 offered an opportunity to investigate the daily vertical migration of the species Chaoborus flavicans with reference to its food supply of zooplankton as well as the chance to carry out some preliminary experiments on its rate of food intake. Among the studied features were the planktonic depth distribution of Chaoborus flavicans and the food intake of Chaoborus larvae under experimental conditions.

Entrainment of fine sediments by turbulent flows

A study was made of the means by which turbulent flows entrain sediment grains from alluvial stream beds. Entrainment was considered to include both the initiation of sediment motion and the suspension of grains by the flow. Observations of grain motion induced by turbulent flows led to the formulation of an entrainment hypothesis. It was based on the concept of turbulent eddies disrupting the viscous sublayer and impinging directly onto the grain surface. It is suggested that entrainment results from the interaction between fluid elements within an eddy and the sediment grains.

A pulsating jet was used to simulate the flow conditions in a turbulent boundary layer. Evidence is presented to establish the validity of this representation. Experiments were made to determine the dependence of jet strength, defined below, upon sediment and fluid properties. For a given sediment and fluid, and fixed jet geometry there were two critical values of jet strength: one at which grains started to roll across the bed, and one at which grains were projected up from the bed. The jet strength K, is a function of the pulse frequency, ω, and the pulse amplitude, A, defined by

K = Aω^-s

Where s is the slope of a plot of log A against log ω. Pulse amplitude is equal to the volume of fluid ejected at each pulse divided by the cross sectional area of the jet tube.

Dimensional analysis was used to determine the parameters by which the data from the experiments could be correlated. Based on this, a method was devised for computing the pulse amplitude and frequency necessary either to move or project grains from the bed for any specified fluid and sediment combination.

Experiments made in a laboratory flume with a turbulent flow over a sediment bed are described. Dye injection was used to show the presence, in a turbulent boundary layer, of two important aspects of the pulsating jet model and the impinging eddy hypothesis. These were the intermittent nature of the sublayer and the presence of velocities with vertical components adjacent to the sediment bed.

A discussion of flow conditions, and the resultant grain motion, that occurred over sediment beds of different form is given. The observed effects of the sediment and fluid interaction are explained, in each case, in terms of the entrainment hypothesis.

The study does not suggest that the proposed entrainment mechanism is the only one by which grains can be entrained. However, in the writer’s opinion, the evidence presented strongly suggests that the impingement of turbulent eddies onto a sediment bed plays a dominant role in the process.

Optimization and Control of Power Flow in Distribution Networks

Climate change is arguably the most critical issue facing our generation and the next. As we move towards a sustainable future, the grid is rapidly evolving with the integration of more and more renewable energy resources and the emergence of electric vehicles. In particular, large scale adoption of residential and commercial solar photovoltaics (PV) plants is completely changing the traditional slowly-varying unidirectional power flow nature of distribution systems. High share of intermittent renewables pose several technical challenges, including voltage and frequency control. But along with these challenges, renewable generators also bring with them millions of new DC-AC inverter controllers each year. These fast power electronic devices can provide an unprecedented opportunity to increase energy efficiency and improve power quality, if combined with well-designed inverter control algorithms. The main goal of this dissertation is to develop scalable power flow optimization and control methods that achieve system-wide efficiency, reliability, and robustness for power distribution networks of future with high penetration of distributed inverter-based renewable generators.

Proposed solutions to power flow control problems in the literature range from fully centralized to fully local ones. In this thesis, we will focus on the two ends of this spectrum. In the first half of this thesis (chapters 2 and 3), we seek optimal solutions to voltage control problems provided a centralized architecture with complete information. These solutions are particularly important for better understanding the overall system behavior and can serve as a benchmark to compare the performance of other control methods against. To this end, we first propose a branch flow model (BFM) for the analysis and optimization of radial and meshed networks. This model leads to a new approach to solve optimal power flow (OPF) problems using a two step relaxation procedure, which has proven to be both reliable and computationally efficient in dealing with the non-convexity of power flow equations in radial and weakly-meshed distribution networks. We will then apply the results to fast time- scale inverter var control problem and evaluate the performance on real-world circuits in Southern California Edison’s service territory.

The second half (chapters 4 and 5), however, is dedicated to study local control approaches, as they are the only options available for immediate implementation on today’s distribution networks that lack sufficient monitoring and communication infrastructure. In particular, we will follow a reverse and forward engineering approach to study the recently proposed piecewise linear volt/var control curves. It is the aim of this dissertation to tackle some key problems in these two areas and contribute by providing rigorous theoretical basis for future work.

The ecology of the Gussage, a lined winterbourne

The Gussage, a Dorset winterhourne (intermittent chalk stream), has been used to convey water from a compensation borehole to the River Allen to supplement its flow to meet demand for water. Sections of the Gussage have been lined with chalk, butyl sheeting or polythene sheeting to prevent water loss through the porous bed. The effects of this major environmental modification associated with these abstraction practices in the winterbourne catchments have been studied in the Gussage system since 1973. To compensate for the lack of adequate pre-lining data, comparative studies have been made on 3 small unlined chalk streams of varying flow regimes, ie. the Crichel (a winterbourne), the North Winterbourne and the Tarrant (permanent discharge in the reaches studies). The distribution of macrophytes and invertebrates in winterbournes are compared with that in natural and artificial permanent streams. Statistical analysis showed samples from the winterbourne sites and the unmodified permanent stream sites are quite distinct, despite the fact that no samples were taken from winterbourne sites during the dry phase. This emphasizes the differences between the fauna of an intermittent and a permanent stream and suggests that alteration of the flow regime could be a significant factor. Where flow regime has been altered, as in the Gussage downstream of the borehole, the samples occupy an intermediate position. Within this group of modified sites there is no apparent gross difference between the invertebrates of lined or unlined reaches.

Physical measures to inhibit planktonic cyanobacteriae

In a small lake, intermittent destratification was installed after several other physico-chemical and physical in-lake therapy measures (phosphorus immobilization, permanent destratification) had been tested without great success. If an aerobic sediment-water interface can be maintained, intermittent destratification removes cyanobacteria and prevents optimal development of other members of the photoautotrophic plankton. During growing seasons, increasing abundances of small-bodied herbivores (Bosmina) and Daphnia may have accounted for relatively low phytoplankton biomass as well. Intermittent destratification is a very fast-working in-lake measure and seems to be applicable even in relatively shallow lakes (< 15 m), in which permanent destratification seems to be risky.

Ocorrência e distribuição espacial e temporal das larvas de anuros (Amphibia) em diferentes sistemas aquáticos da Ilha Grande (Rio de Janeiro)

Os girinos dos anuros podem ocorrer em inúmeros tipos de sistemas hídricos, desde ambientes relativamente simples e previsíveis, como na água acumulada em epífitas ou uma poça temporária, até hábitats aquáticos permanentes mais complexos, como os riachos. A interação entre os fatores ambientais bióticos e abióticos existentes nesses diferentes ambientes com os fatores históricos é essencial para explicar a estrutura das comunidades dessa fase de vida dos anuros. O entendimento sobre como estes fatores atuam e sua importância nos conduz a uma maior compreensão do que parece influenciar positivamente ou negativamente o estabelecimento dos girinos nos seus diferentes ambientes. Inicialmente, fornecemos uma discussão detalhada da importância desses fatores. Em seguida, avaliamos a estrutura da assembléia dos girinos e a sua estratégia de ocupação espacial e temporal em relação ao uso de diferentes sistemas aquáticos, temporários e permanentes (poças, terrenos alagados, riachos e ambientes artificiais) em uma área de Mata Atlântica na Ilha Grande (Rio de Janeiro). Posteriormente, propomos um experimento para avaliar como os girinos característicos de diferentes tipos de habitats hídricos respondem à condição adversa de ausência de água livre. Depois, é sugerida uma chave artificial de identificação para os girinos da Ilha Grande, com base nas espécies contempladas neste estudo. Por fim, apresentamos a descrição do girino de Proceratophrys tupinamba, provendo algumas informações sobre sua distribuição temporal e uso de microhabitats. Registramos girinos de 12 espécies de anuros, o que correspondeu a 71% dos anfíbios da Ilha Grande com larvas exotróficas em ambientes aquáticos. O espectro de habitats hídricos utilizados variou consistentemente entre as espécies. Girinos de Aplastodiscus eugenioi e Scinax trapicheiroi foram aqueles que utilizaram a maior quantia de tipos de habitats, ambos com cinco registros. A maioria das espécies teve suas maiores abundâncias em um ou dois tipos de corpos dágua onde ocorreu, portanto poucas destas espécies demonstram ter sido generalistas no uso de tipos de habitats aquáticos. A maior riqueza de espécies ocorreu em poças temporárias, em riachos intermitentes e no ambiente antropizado da calha artificial. Quando consideramos em termos de habitats hídricos, a maior riqueza ocorreu nas poças temporárias, nos riachos intermitentes, nos riachos permanentes e na calha artificial. Em nem todos os meses um determinado tipo de recurso hídrico manteve a sua riqueza máxima de girinos. Observamos que um mesmo tipo de sistema hídrico pode comportar espécies típicas de ambientes lênticos e outras adaptadas a ambientes lóticos, dependendo da estrutura em que o corpo dágua apresenta naquele período, como os riachos intermitentes, por exemplo. Entre os fatores abióticos medidos, o PH, o oxigênio dissolvido, a correnteza, a largura e a profundidade dos corpos dágua explicaram de forma mais importante a ocorrência e abundância das diferentes espécies de girinos. Portanto, consideramos que fatores ecológicos desempenham um importante papel na determinação da distribuição de girinos dentro e entre habitats que estes organismos ocupam. O experimento proposto mostrou que os tempos de sobrevivência entre as onze espécies contempladas e também entre os indivíduos de diferentes tamanhos em uma mesma espécie variaram consideravelmente. Isto é sugestivo de que estas espécies apresentam diferentes estratégias para tolerar uma condição de independência de água livre. Os fatores que pareceram mais influenciar negativamente na sobrevivência dos girinos foram: hábito nectônico, pequeno tamanho dos indivíduos, ocupação de ambientes lênticos e temporários e modo reprodutivo não-especializado. Alternativamente, os girinos com melhor desempenho em uma condição de independência de água livre foram de espécies de tamanho comparativamente grande ou médio, ocuparam preferencialmente ambientes lóticos e permanentes, apresentaram modos reprodutivos especializados e os hábitos dos girinos foram principalmente bentônicos. Neste contexto, pode se conjecturar que os girinos das espécies que utilizam ambientes permanentes sejam mais resistentes à condição de independência de água livre do que aquelas de habitats efêmeros. Considerando especial atenção para a biodiversidade dos anfíbios, a Ilha Grande apresenta uma elevada concentração de espécies endêmicas. Esta respeitável diversidade de anfíbios para a área estudada está relacionada com a cobertura vegetal de Mata Atlântica e a grande quantidade de corpos dágua na Ilha, tanto temporários quanto permanentes. A influência destas condições favoráveis para os anfíbios na região está demonstrada também na diversidade de modos reprodutivos, onde 13 dos 39 modos reprodutivos já descritos foram notados para os anfíbios da Ilha Grande. Este conjunto de fatores reafirma esta como uma das mais importantes áreas para a conservação da biodiversidade de anfíbios para o estado do Rio de Janeiro. Comparando a descrição do girino de Proceratophrys tupinamba com P. appendiculata, observamos algumas diferenças na proporção do corpo. Os girinos da espécie descrita foram mais abundantes durante a estação chuvosa (outubro-março), sendo esta distribuição positivamente relacionada com a precipitação média mensal. Os girinos são bentônicos e ocorrem mais frequentemente em porções de menor correnteza do riacho. Eles foram encontrados com maior freqüência expostos na areia, que também representou o microhabitat mais disponível entre aqueles no córrego estudado.

Influencia del vehículo eléctrico en la red eléctrica, en función del comportamiento social.

[ES]En la actualidad, el modelo de transporte apenas ha avanzado en el intento de frenar el Cambio Climático o en el cuidado del medio ambiente. Además, el gran negocio que existe detrás del petróleo hace que este tipo de transporte sea poco sostenible. Es por eso que se está desarrollando, a nivel nacional e internacional, una solución a dicho problema que es el uso del vehiculó eléctrico (VE). La introducción masiva del VE permitirá el uso extensivo de fuentes de energía no contaminantes e intermitentes, como son las energías renovables. Sin embargo, los VEs están lejos de ser una tecnología probada. Existen aún muchos problemas en torno a él que deben ser resueltos, entre ellos se encuentra el desarrollo de las baterías, su modelo de negocio y coste o la influencia de la conexión del VE sobre la red eléctrica. Este último problema, estará muy influenciado por el comportamiento social del futuro conductor, lo cual es el eje central del proyecto.

Entremeios da arte: moda e arte

Este trabalho versa sobre o universo da arte tangenciado pela moda, sua efemeridade, pertencimentos e seus agenciamentos. Nesse contexto, busca-se exemplificar o quanto a moda e a arte estão intrinsecamente ligadas. O ponto de partida é a moda como experiência e expressão coletiva e/ou individual, principalmente em trajes e formas vestimentares, pois são esses que mais forte influência exercem sobre o homem, seu corpo, seu espaço e memória. Localiza-se esse processo de aproximação entre arte e moda no século XX, quando vanguardas romperam com o academicismo clássico, agregando à arte sinestesias de sistemas relacionais. Rejeitam-se intermitências escultóricas e pictóricas para dar lugar a linguagens que interagem com o espectador. Os dados do presente trabalho traçam o panorama da aproximação entre arte e moda, a partir de duas vertentes: a primeira demonstra como a arte busca, no traje, suas sinergias, influenciando-se e apropriando-se da sinestesia proporcionada pela roupa; a segunda, como a moda apropriou-se de elementos da arte, em busca de um reposicionamento como expressão e não somente consumo