Effective Data Management Enables Intelligent Utility Management

Instrumentation and automation plays a vital role to managing the water industry. These systems generate vast amounts of data that must be effectively managed in order to enable intelligent decision making. Time series data management software, commonly known as data historians are used for collecting and managing real-time (time series) information. More advanced software solutions provide a data infrastructure or utility wide Operations Data Management System (ODMS) that stores, manages, calculates, displays, shares, and integrates data from multiple disparate automation and business systems that are used daily in water utilities. These ODMS solutions are proven and have the ability to manage data from smart water meters to the collaboration of data across third party corporations. This paper focuses on practical, utility successes in the water industry where utility managers are leveraging instantaneous access to data from proven, commercial off-the-shelf ODMS solutions to enable better real-time decision making. Successes include saving $650,000 / year in water loss control, safeguarding water quality, saving millions of dollars in energy management and asset management. Immediate opportunities exist to integrate the research being done in academia with these ODMS solutions in the field and to leverage these successes to utilities around the world.

Optimized Water Demand Management Through Intelligent Sensing And Analytics: The WISDOM Approach

New business and technology platforms are required to sustainably manage urban water resources [1,2]. However, any proposed solutions must be cognisant of security, privacy and other factors that may inhibit adoption and hence impact. The FP7 WISDOM project (funded by the European Commission - GA 619795) aims to achieve a step change in water and energy savings via the integration of innovative Information and Communication Technologies (ICT) frameworks to optimize water distribution networks and to enable change in consumer behavior through innovative demand management and adaptive pricing schemes [1,2,3]. The WISDOM concept centres on the integration of water distribution, sensor monitoring and communication systems coupled with semantic modelling (using ontologies, potentially connected to BIM, to serve as intelligent linkages throughout the entire framework) and control capabilities to provide for near real-time management of urban water resources. Fundamental to this framework are the needs and operational requirements of users and stakeholders at domestic, corporate and city levels and this requires the interoperability of a number of demand and operational models, fed with data from diverse sources such as sensor networks and crowsourced information. This has implications regarding the provenance and trustworthiness of such data and how it can be used in not only the understanding of system and user behaviours, but more importantly in the real-time control of such systems. Adaptive and intelligent analytics will be used to produce decision support systems that will drive the ability to increase the variability of both supply and consumption [3]. This in turn paves the way for adaptive pricing incentives and a greater understanding of the water-energy nexus. This integration is complex and uncertain yet being typical of a cyber-physical system, and its relevance transcends the water resource management domain. The WISDOM framework will be modeled and simulated with initial testing at an experimental facility in France (AQUASIM – a full-scale test-bed facility to study sustainable water management), then deployed and evaluated in in two pilots in Cardiff (UK) and La Spezia (Italy). These demonstrators will evaluate the integrated concept providing insight for wider adoption.

Gerenciamento de documentação técnica para ambientes de engenharia/CAD com suporte a versões

Ambientes de engenharia apresentam a forte característica da necessidade de cooperação entre projetistas na concepção de projetos CAD, o que provoca uma série de problemas em relação aos ambientes usuais encontrados em aplicações convencionais. Na busca de solucionar tais problemas, vários recursos e mecanismos relativos às gerências de dados e do processo de projeto são apresentados em vários estudos encontrados na literatura. Boa parte desses recursos estão embutidos nesse trabalho, que visa apresentar um sistema gerenciador de documentação técnica para ambientes de engenharia/CAD chamado GerDoc Ábacus. A proposta da construção do GerDoc Ábacus é baseada na busca da solução dos problemas relativos à consistência dos dados de projetos e da integração de tarefas de projetistas que interagem em ambientes distribuídos de projeto. Unindo vários mecanismos, é proposta uma interface totalmente interativa, objetivando manter a harmonia entre projetistas que fazem parte de equipes de projetos que são mantidos em atividade durante longos períodos de tempo, além de documentar todos os passos realizados acerca de cada um desses projetos. Dessa forma, o GerDoc Ábacus é uma ferramenta organizacional e administrativa para projetos de engenharia, sendo de fácil operacionalização, buscando altos níveis de integridade dos dados mantidos.

Aplicação de um sistema robótico utilizando recursos de sistemas CAD/CAM para o processo de fresamento

Sistemas produtivos industriais podem combinar, em células de manufatura, diferentes características de automação de processos permitindo interfaceamento e possibilitando a flexibilização e otimização da manufatura. Nos processos de fabricação, as dificuldades para a execução de processos de usinagem convencional ou mesmo através de comando numérico, quando se dispõe de máquinas adequadas para a fabricação de peças de geometrias complexas, podem limitar a criatividade, bem como dificultar o desenvolvimento do processo produtivo de forma otimizada. As dificuldades encontradas vão desde fixação das peças, necessidades de dispositivos especiais, restrições nos volumes de trabalho de máquinas CNC e mesmo a geração de trajetórias complexas para máquinas com limitações de eixos. Este trabalho propõe uma metodologia alternativa para usinagem, especialmente fresamento, com desenvolvimento de um algoritmo capaz de, através da utilização de recursos de sistemas CAD/CAM, traduzir arquivos gráficos para uma linguagem de programação utilizada em robôs. Na aplicação utilizam-se recursos dos sistemas CAD/CAM para gerar, numa primeira etapa, o código de programação para máquinas-ferramenta de comando numérico e posterior adaptação, para aplicação em sistemas robóticos. Informações de caminhos de ferramenta para usinagem em máquinas CNC são convertidos, através de uma interface computacional, em trajetórias a serem seguidas por uma ferramenta guiada por um manipulador de robô industrial. Os parâmetros de processo são também adequados as restrições dos sistemas robotizados. A viabilidade do sistema proposto é confirmada através de testes realizados em modelos de superfícies complexas, onde o objetivo do referido trabalho foi alcançado.

Uma proposta para auxiliar a interoperabilidade entre ambientes e ferramentas independentes de CAD para microeletrônica

Os projetos de CIs (Circuitos Integrados) atualmente compreendem muitas tarefas para sua execução. Durante um fluxo de projeto de CI são necessárias ferramentas que lidam com essas diferentes tarefas. Algumas empresas compilam diversas ferramentas em um único ambiente, ou framework, onde tais ferramentas são adaptadas para interagir entre si. O uso desses frameworks é suficiente para muitos projetos, porém podem existir requisitos que obriguem a utilização de ferramentas independentes para suprir deficiências dos ambientes, exigindo a utilização conjunta de ferramentas não projetadas para cooperar. A interoperabilidade entre sistemas computacionais tem se tornado um tópico de extrema importância. Ela possibilita a execução conjunta de ferramentas, diminuindo a necessidade de intervenção humana para tanto. A interoperação entre ferramentas independentes e frameworks é importante não somente para facilitar o uso conjunto de ferramentas, mas também permite que outros tópicos sejam explorados. Entre eles estão o trabalho de equipes geograficamente distantes e a possibilidade de trabalho com grandes quantidades de dados, que são duas questões importantes para microeletrônica. Ainda, a interoperação entre ferramentas independentes e ambientes traz benefícios mútuos: as ferramentas podem utilizar funcionalidades dos ambientes e se adaptar aos fluxos de projeto deles; os ambientes podem ter suas funcionalidades estendidas pela inclusão de novas ferramentas em seu trabalho. Essas questões são especialmente importantes para pequenas empresas ou ferramentas acadêmicas que não têm condições de incorporar em suas ferramentas muitos dos procedimentos que os ambientes oferecem. Este trabalho apresenta uma proposta para auxiliar a interoperação entre ferramentas independentes e frameworks relevantes para a microeletrônica, através de um protocolo inspirado em SOAP (Simple Object Access Protocol), além de oferecer ferramentas de auxílio para a adaptação ao protocolo proposto. A interação com os frameworks é feita através de linguagens script disponibilizadas por eles. Estudos de caso são apresentados para demonstrar a usabilidade da proposta.

Introdução ao CAD: desenho auxiliado por computador

O item não apresenta o texto completo, pois está passando por revisão editorial

Design gráfico da pluma de contaminação por compostos orgânicos voláteiss utilizando software CAD na investigação de passivo ambiental em um posto revendedor de combustíveis em Natal/RN

Among the potentially polluting economic activities that compromise the quality of groundwater are the gas stations. The city of Natal has about 120 gas stations, of which only has an environmental license for operation. Discontinuities in the offices were notified by the Public Ministry of Rio Grande do Norte to carry out the environmental adaptations, among which is the investigation of environmental liabilities. The preliminary and confirmatory stages of this investigation consisted in the evaluation of soil gas surveys with two confirmatory chemical analysis of BTEX, PAH and TPH. To get a good evaluation and interpretation of results obtained in the field, it became necessary three-dimensional representation of them. We used a CAD software to graph the equipment installed in a retail service station fuel in Natal, as well as the plumes of contamination by volatile organic compounds. The tool was concluded that contamination is not located in the current system of underground storage of fuel development, but reflects the historical past in which tanks were removed not tight gasoline and diesel

Comparative analysis between a CAD model design and physical models obtained by manufacturing additive technologies using optical scan

This article presents a detailed study of the application of different additive manufacturing technologies (sintering process, three-dimensional printing, extrusion and stereolithographic process), in the design process of a complex geometry model and its moving parts. The fabrication sequence was evaluated in terms of pre-processing conditions (model generation and model STL SLI), generation strategy and physical model post-processing operations. Dimensional verification of the obtained models was undertook by projecting structured light (optical scan), a relatively new technology of main importance for metrology and reverse engineering. Studies were done in certain manufacturing time and production costs, which allowed the definition of an more comprehensive evaluation matrix of additive technologies.

CAD e engenharia reversa como ferramentas de auxílio na fabricação de cartuchos para próteses ortopédicas

The manufacturing of above and below-knee prosthesis starts by taking surfac measurements of the patient s residual limb. This demands the making of a cartridg with appropriate fitting and customized to the profile of each patient. The traditiona process in public hospitals in Brazil begins with the completion of a record file (according to law nº388, of July 28, 1999 by the ministry of the health) for obtaining o the prosthesis, where it is identified the amputation level, equipment type, fitting type material, measures etc. Nowadays, that work is covered by the Brazilian Nationa Health Service (SUS) and is accomplished in a manual way being used commo measuring tapes characterizing a quite rudimentary, handmade work and without an accuracy.In this dissertation it is presented the development of a computer integrate tool that it include CAD theory, for visualization of both above and below-knee prosthesis in 3D (i.e. OrtoCAD), as well as, the design and the construction a low cos electro-mechanic 3D scanner (EMS). This apparatus is capable to automatically obtain geometric information of the stump or of the healthy leg while ensuring smalle uncertainty degree for all measurements. The methodology is based on reverse engineering concepts so that the EMS output is fed into the above mentioned academi CAD software in charge of the 3D computer graphics reconstruction of the residualimb s negative plaster cast or even the healthy leg s mirror image. The obtained results demonstrate that the proposed model is valid, because it allows the structura analysis to be performed based on the requested loads, boundary conditions, material chosen and wall thickness. Furthermore it allows the manufacturing of a prosthesis cartridge meeting high accuracy engineering patterns with consequent improvement in the quality of the overall production process

Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.

Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

A engenharia simultânea e o perfil da indústria de confecção da grande Natal/RN utilizando as ferramentas CAD/PDM e ERP

This work presents the research carried through in the industrial segment of confection of clothes of the Great Natal whose objective is to show the profile, enterprise and technological management as also the use of simultaneous engineering in the development of products. The research approaches two studies. The first one presents the current picture of the companies, synthesized through twelve variable. As, through fifteen variable it shows to the level of use of Simultaneous Engineering in the Development of Products and its amplitude in relation to the Integrated Management using tools CAD, PDM and ERP (Computer Aided Design, Product Management Date, Enterprise Resource Planning). The integration of these systems acts aiming the reduction of the cost and the development time of products. The reached results indicate that simultaneous engineering is a competitive advantage and becomes possible: to reduce the life cycle of the product, to rationalize the resources, to incorporate one high standard of the quality to the process and product as well as to personalize the product to take care of the global market. It is important to note that this work also is considered to contribute for the better understanding of the real companies situation of confection located at the Great Natal and its role in the economy of the State of the Rio Grande do Norte