Desenvolvimento de um sistema de detecção fotoacústico utilizando dois microfones: aplicações em medidas de difusividade térmica

Neste trabalho, desenvolveu-se um sistema de detecção fotoacústico para medidas simultâneas e independentes dos sinais fotoacústicos dianteiro e traseiro, utilizando dois microfones e um único feixe de excitação. Utiliza-se a diferença de fase entre estes sinais para a determinação da difusividade térmica de materiais, com base na abordagem teórica da técnica da Diferença de Fase dos Dois Feixes (T2F). Na metodologia apresentada não há a necessidade de se alternar o feixe de excitação entre as faces da amostra. Esta característica torna mais rápido o procedimento de medida e simplifica o monitoramento automatizado de processos dinâmicos que afetam a difusividade térmica do material, como a cura de resinas poliméricas. É apresentado o procedimento utilizado para determinar a diferença entre as fases intrínsecas dos microfones e o método empregado para compensar tal diferença e, assim, obter a defasagem entre os sinais fotoacústicos dianteiro e traseiro. O sistema de detecção desenvolvido é avaliado em medidas de difusividade térmica de amostras metálicas (aço inoxidável AISI 304 e aço SAE 1020) e poliméricas (polipropileno e polietileno de baixa densidade). Os resultados obtidos concordam de forma satisfatória com dados disponíveis na literatura. Finalmente, a aplicação do sistema proposto ao monitoramento de cura de amostras de resina epóxi indicou sua potencialidade de acompanhar, em tempo real, este tipo de processo dinâmico.

Avaliação de microplásticos em praias da Baía de Guanabara, Rio de Janeiro, RJ, Brasil

Neste trabalho foram analisados sedimentos marinhos de três praias da Baía de Guanabara (praia de São Bento e praia da Bica, na Ilha do Governador, e praia de São Francisco, em Niterói), Rio de Janeiro, para avaliar a presença de microplásticos (fragmentos plásticos com tamanho ≤ 5 mm) nestes ambientes. Os detritos plásticos visíveis (macroplástico) foram separados dos sedimentos manualmente e pesados. Os detritos plásticos não visíveis foram separados por densidade com solução saturada de cloreto de sódio. Os fragmentos plásticos obtidos com a separação por densidade foram caracterizados por microscopia óptica para avaliar forma e superfície, e foram classificados e quantificados em função de seu tamanho. Os fragmentos microplásticos foram separados e caracterizados por espectrometria de absorção na região do infravermelho por reflexão atenuada (ATR FT IR). Os espectros obtidos foram comparados com espectros padrão de polímeros. As três praias se apresentam contaminadas com lixo macroplástico e com lixo microplástico. Na praia da Bica, foram coletados 173 fragmentos, dos quais 73% são microplásticos. Na praia de São Bento foram 81 fragmentos e na praia de São Francisco foram 73 fragmentos, dos quais 70% e 86%, respectivamente, são microplásticos. Nas três praias foram encontrados fragmentos microplásticos de poliestireno expandido. Nas praias da Bica e de São Bento foram encontrados fragmentos de polietileno; nas praias de São Bento e São Francisco foram encontrados fragmentos microplásticos de polipropileno. O descarte irregular de lixo e atividades industriais e comerciais no entorno da baía podem ser apontados como possíveis fontes contaminantes

Caracterização e desenvolvimento de argilas para aplicação em nanocompósitos poliméricos

O Brasil é produtor de argilas e conta com grandes reservas deste recurso natural. Porém, grande parte da sua produção é comercializada seca e moída. O desenvolvimento de argilas para seu uso como reforço em nanocompósitos poliméricos constitui uma opção para os produtores desta matéria prima que teriam assim um produto com maior valor agregado. Este trabalho visa avaliar o potencial uso como nanocarga de duas argilas nacionais provenientes da Bacia de Taubaté, São Paulo, denominadas ALIGRA e SANTA FÉ. As frações de tamanho de partícula médio menor de 0,02 mm, obtidas por peneiramento á úmido da argila homogeneizada e seca, foram utilizadas no desenvolvimento do trabalho experimental. Os estudos de caracterização, envolvendo análise granulométrica, química, mineralógica, morfológica, térmica e textural, revelaram características muito semelhantes em ambas às argilas. Fração argila, maior de 70% em massa. Composição química conforme a definição química de uma argila e os teores de seus componentes mostram valores intermédios entre as apresentadas pelas bentonitas e argila caulinítica usadas com fins de comparação. Ressaltamse boas propriedades adsorventes. Área superficial específica BET ao redor de 120 m2/g, valor maior do que o apresentado por muitas bentonitas naturais (74,5 m2/g). Predominantemente mesoporosas, com poros, maiormente em forma de fenda, característicos da estrutura em camadas das argilas. Baixa capacidade de troca catiônica, 12 meq/100g. Difratogramas de raios-X revelaram a predominância do estratificado ilita/esmectita, caulinita e quartzo na argila ALIGRA, e de ilita, caulinita e quartzo na argila SANTA FÉ. Prosseguiu-se com a argila ALIGRA a preparação da argila organofílica. A argila organofílica foi obtida por troca catiônica com o sal quaternário de amônio: cloro cetril trimetil amônio, depois de homogeneizada em sódio com cloreto de sódio. Análises FTIR e TGA indicaram que houve inserção dos cátions orgânicos. Testes preliminares foram feitas, preparando misturas das argilas com matriz de polipropileno e usando como agente compatibilizante polipropileno enxertado com anidrido maleico. Resultados de ensaios de tração reportam algumas melhoras nas propriedades testadas com as composições preparadas com as argilas purificadas. Com as composições com argilas organofílicas somente foi melhorado o alongamento na rotura. Estudos ais aprofundados são recomendados.

Caracterização ambiental preliminar de um sistema rio estuário tropical em área de Mata Atlântica, Ilha Grande (RJ).

O presente trabalho visa contribuir para a valorização e conservação dos cursos dágua e biodiversidade em área de Mata Atlântica no Estado do Rio de Janeiro, através da caracterização ambiental preliminar do sistema rio - estuário Córrego Andorinhas, localizado no Parque Estadual da Ilha Grande (RJ), utilizando indicadores abióticos e bióticos. As amostragens ocorreram de 20/10/11 a 22/10/11, pela manhã e tarde, em duas profundidades de três estações. O fitoplâncton e protozooplâncton foram coletados com frascos de polipropileno (500 ml), fixados com formaldeído 2% neutralizado com bórax e analisados em câmaras de sedimentação de Uthermöl. O zooplâncton foi coletado com rede de 68 μm de malha, fixado com formaldeído 4% neutralizado com bórax e analisado em subamostras. Variáveis abióticas foram analisadas in situ com sondas. Os nutrientes foram coletados com garrafa de Van Dorn e frascos de polipropileno, congeladas e levadas para análise no laboratório de Geoquímica da UFF. A estação AN-01 apresentou menores valores de temperatura da água (19 C), condutividade (2,3 μS/cm) e turbidez (1,1 UNT), mas com maiores valores de OD (9,6 mg/L). Maiores valores de turbidez (6,9 UNT) e pH (7,7) foram registrados na estação AN-02, enquanto a estação AN-03 apresentou maiores valores de temperatura da água (23,7 C) e condutividade (1951 μS/cm). O fitoplâncton apresentou valores máximos nas estações AN-02 manhã em 22/10/11 (4,28 x 103 ind/L) e AN-03 tarde em 20/10/11(3,4 x 103 ind/L). O zooplâncton apresentou valores máximos na estação AN-03 manhã (421,2 x 103 ind/L) e tarde (45,8 x 103 ind/L). Os valores máximos registrados para protozooplâncton foram registrados nas estações AN-02 manhã em 22/10/11 (35,1 x 103 ind/L) tarde em 21/10/11 (12,6 x 103 ind/L). A partir dos dados abióticos, caracterizou-se o sistema como oligo-mesotrófico, com características distintas em seus pontos de coleta: A dominância de sarcodinos, diatomáceas e calanóides, em riqueza e densidade, demonstram o caráter estuarino, pois protozoários são indicadores de ambientes lóticos continentais, calanóides de ambientes marinhos e diatomáceas representantes de ambos os ambientes. Este estudo preliminar demonstrou a integridade ambiental do estuário, fato que reflete em sua preservação e da Mata Atlântica em seu entorno.

Hemisferectomia na vida adulta como modelo para o estudo das assimetrias cerebrais no controle da reatividade emocional e atividade locomotora em camundongos

Evidências sugerem que a lateralização cerebral é uma característica fundamental dos vertebrados. Nos seres humanos, tem sido sugerido que o hemisfério direito é especializado no processamento de informação emocional negativa e o hemisfério esquerdo no controle da função motora. Em roedores, evidências de lateralização hemisférica são escassas. Diante disso, utilizamos a hemisferectomia para avaliar a importância relativa de cada hemisfério no controle emocional e na atividade motora espontânea em camundongos. Machos adultos foram submetidos à hemisferectomia direita (HD), hemisferectomia esquerda (HE) ou a simulação da cirurgia (SHAM). Para ajudar na interpretação dos resultados, uma amostra adicional de camundongos foi submetida à aspiração unilateral da área frontoparietal esquerda (FPE), da área frontoparietal direito (FPD) ou a simulação da cirurgia (CONT). Quinze dias após a cirurgia, a reatividade emocional e a ambulação foram avaliadas no teste de campo aberto durante 10 minutos (dividido em intervalos de 1 min). A arena de campo aberto consistiu em uma caixa de polipropileno, cujo fundo foi dividido em 16 retângulos do mesmo tamanho. O número total de retângulos cruzados pelo animal foi utilizado como a medida da atividade locomotora espontânea. Considerando-se que os camundongos evitam áreas abertas, a locomoção no centro e o tempo despendido nos retângulos centrais foram utilizados para avaliar a reatividade emocional. Em relação à atividade locomotora as duas técnicas cirúrgicas revelaram assimetrias na direção oposta. A atividade locomotora do grupo HE aumentou ao longo do período de teste e foi maior do que a dos grupos HD e SHAM. Em contraste, a atividade locomotora do grupo FPD diminuiu ao longo do período de teste e foi superior a ambos os grupos, FPE e CONT. Em relação à reatividade emocional, o grupo HE passou menos tempo na área central que os grupos HD e CONT. Não foram observadas diferenças entre FPD, FPE e o grupo CONT. Os nossos resultados sugerem que os dois hemisférios contribuem de forma assimétrica para controlar de reatividade emocional e para controlar de atividade motora em camundongos. De forma semelhante ao que é observado em humanos, o hemisfério direito dos camundongos foi mais associado com o processamento de informação emocional negativa. Em relação aos dados de hiperatividade, as diferenças observadas entre os animais hemisferectomizados e com lesão frontoparietal sugerem que mais de um circuito (ou sistema) lateralizado pode mediar a atividade locomotora espontânea.

A pilot study to determine the movements of buoy line used in the crab pot fishery to assess bottlenose dolphin entanglement

A pilot study on the characteristics of crab pot buoy line movements to assess bottlenose dolphin entanglement was conducted from 19 September to 30 September 2005 in the Charleston Harbor, Charleston, South Carolina. The objectives of this study were to determine: 1) the movements of the buoy line in the water at various tidal stages, current strengths, lengths of line, and water depth, 2) if lead-core rope was a better alternative to nylon rope, 3) and if the manner of deployment of the gear affected the suspension of the line in the water and on the bottom. Diamond braided nylon (#10) rope of varying length (20 ft. – 80 ft.) were used during 31 trials and stiffened (polypropylene lead-core) rope was used in four trials. Observations of the buoy line movements were captured with an Atlantis underwater camera attached to a Digital DPC-1000 video recorder. Results from this study showed that: 1) the method used for deployment was important in keeping the buoy line from arcing or coiling, 2) little to no arcing occurred in water current velocities of >0.20 m/s, 3) rope lengths of ≥50 ft. deployed in <10 ft. of water produced waving in the water column and arcing on the bottom, 4) slack tide was a period of increased risk of entanglement for bottlenose dolphins, and 5) poly lead-core rope was not a good alternative to nylon rope unless in deep water with strong water current velocities. This pilot study produced questions that can be used for future studies on the characteristics of buoy line movements in the crab pot fishery as it relates to bottlenose dolphin entanglements.

MDNR-NOAA trawl standardization study

Long-term living resource monitoring programs are commonly conducted globally to evaluate trends and impacts of environmental change and management actions. For example, the Woods Hole bottom trawl survey has been conducted since 1963 providing critical information on the biology and distribution of finfish and shellfish in the North Atlantic (Despres-Patango et al. 1988). Similarly in the Chesapeake Bay, the Maryland Department of Natural Resources (MDNR) Summer Blue Crab Trawl survey has been conducted continuously since 1977 providing management-relevant information on the abundance of this important commercial and recreational species. A key component of monitoring program design is standardization of methods over time to allow for a continuous, unbiased data set. However, complete standardization is not always possible where multiple vessels, captains, and crews are required to cover large geographic areas (Tyson et al. 2006). Of equal issue is technological advancement of gear which serves to increase capture efficiency or ease of use. Thus, to maintain consistency and facilitate interpretation of reported data in long-term datasets, it is imperative to understand and quantify the impacts of changes in gear and vessels on catch per unit of effort (CPUE). While vessel changes are inevitable due to ageing fleets and other factors, gear changes often reflect a decision to exploit technological advances. A prime example of this is the otter trawl, a common tool for fisheries monitoring and research worldwide. Historically, trawl nets were constructed of natural materials such as cotton and linen. However modern net construction consists of synthetic materials such as polyamide, polyester, polyethylene, and polypropylene (Nielson et. al. 1983). Over the past several decades, polyamide materials which will be referred to as nylon, has been a standard material used in otter trawl construction. These trawls are typically dipped into a latex coating for increased abrasion resistance, a process that is referred to as “green dipped.” More recently, polyethylene netting has become popular among living resource monitoring agencies. Polyethylene netting, commonly known as sapphire netting, consists of braided filaments that form a very durable material more resistant to abrasion than nylon. Additionally, sapphire netting allows for stronger knot strength during construction of the net further increasing the net’s durability and longevity. Also, sapphire absorbs less water with a specific gravity near 0.91 allowing the material to float as compared to nylon with specific gravity of 1.14 (Nielson et. al. 1983). This same property results in a light weight net which is more efficient in deployment, retrieval and fishing of the net, particularly when towing from small vessels. While there are many advantages to the sapphire netting, no comparative efficiency data is available for these two trawl net types. Traditional nylon netting has been used consistently for decades by the MDDNR to generate long term living resource data sets of great value. However, there is much interest in switching to the advanced materials. In addition, recent collaborative efforts between MDNR and NOAA’s Cooperative Oxford Laboratory (NOAA-COL) require using different vessels for trawling in support of joint projects. In order to continue collaborative programs, or change to more innovative netting materials, the influence of these changes must be demonstrated to be negligible or correction factors determined. Thus, the objective of this study was to examine the influence of trawl net type, vessel type, and their interaction on capture efficiency.

Synthetic fibres for fishing gear

A variety of synthetic fibres are at present in use as fishing gear material, the earliest one being the polyvinyl chloride group introduced for traps in 1936 (von. Brandt 1957). Since then synthetic fibres became increasingly popular among the advanced fishing nations of the world. The latest synthetic fibre which has been successfully used in fishing is polypropylene developed in Italy in 1954.

Packaging and storage studies of dried lizard fish

Packaging and storage studies of salted and dried lizard fish (Saurida sp.) have been conducted using different synthetic films like low density polyethylene (LDPE) of different gauges, high density polyethylene (HDPE) of 200 gauge, polyvinylidene chloride (PVDC) coated 400 MXXT cellophane, 100 gauge polypropylene (PP) and paper laminate of 100 gauge polythene. The films found most effective in the preliminary studies were subsequently used for packaging and storage of dried fish at atmospheric and lower temperature and humidity conditions for confirming their suitability under these conditions. Polyethylene films of higher gauges showed better results under both sets of conditions. PVDC coated cellophane film also performed satisfactorily under the latter conditions which under the former condition got easily attacked by insects. Lower temperature and humidity conditions in general enhanced the storage life of the dried product.

Biology and farming of the green mussel Mytilus smaragdinus

Biological investigations were carried out in Sapian Bay, Capiz from November 1975 to December 1976 with samplings conducted fortnightly. Histological studies on the gonad reveal a high percentage of ripe and spent females during the month of April and May, and ripe to near ripe during November to December. However, larval counts were highest on February 25, 1976 with 253 mytilid larvae per haul compared to 0-79 per haul during all other months. The high larval count was followed by the highest spat settlement during the next sampling period two weeks later, with the spat collector set in the water during the February 25 sampling. The four materials tested, blue polypropylene fiber rope, black polypropylene fiber, and coir rope, all had their highest spat counts during this period with an average of 471 spats per standard 10 cm rope piece. The range during the other time periods is 2-283 spats. Of the 4 materials tested, the black fibrillated polypropylene film had the highest larval counts in 15 out of a total of 25 sampling periods. The blue rope was the poorest spat collector. Coconut husk was tested later on and it proved to have a very high catchability, with spats completely enveloping the husk surface. Growth monitored from one cohort in Sapian Bay averaged 10 mm per month. 50-60 mm is considered marketable size. Trial growth experiments with transplanted mussels were also conducted at Igang Bay in Guimaras Island, Makato River in Aklan, and a milkfish pond in Leganes, Iloilo. Survival in Igang was less than 50% after the second week, and the condition of the surviving mussels can be described only as 'watery' with the mantle completely transparent. Mortality was minimal in Makato but the growth rate was only 30% that of Sapian Bay. The pond experiments were terminated due to severe crab predation.

The effect of cationic, non-ionic and amphiphilic surfactants on the intercalation of bentonite

Surfactant-clay interactions are key for the development of new clay applications and inorganic-organic nanocomposites. Bentonite, with montmorillonite as the principal clay mineral constituent, was modified with varying concentrations of hexadecethyltrimethylammonium chloride (HDTMA), as a reference cationic surfactant, polypropylene glycol (PPG) 1200 and 2000, as non-ionic surfactants, and lecithin and Topcithin®, as amphiphilic phospholipid surfactants, according to the cation exchange capacity (CEC). The modified bentonites were characterised by X-ray diffraction, thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectrometry, specific surface area and pore volume. Three intercalation regions have been identified depending on the surfactant. The non-ionic surfactant caused only a crystalline expansion of bentonite interlayers, while the cationic surfactant induced an osmotic intercalation. The amphiphilic lecithin derivatives intercalated more extensively with the bentonite matrix. The TGA and the FTIR spectra showed that, at lower concentrations, the PPGs and HDTMA adopted a disordered conformation that required more energy to degrade, while at higher concentrations, the surfactants were ordered in the interlayer space of the bentonite. The lecithin derivative surfactant had a greater thermal and conformation stability. The specific surface area reduced with increasing surfactant concentrations. This study highlights the effect of surfactant type on the interlayer space of montmorillonite in the perspective of developing novel clay functions. © 2013.

功能化聚丙烯及其与聚对苯二甲酸丁二醇酯共混物的制备及结构性能研究

本工作通过电子束预辐照处理和反应挤出方法，制备了丙烯酸功能化预辐照聚丙烯rPP-g-AA，采用化学滴定和红外光谱方法均证明接枝共聚物的存在，同时确定了预辐照剂量和单体浓度对接枝率的影响：（1）当单体浓度一定时，接枝率随预辐照剂量的增加而增加并逐渐达到平台值；（2）当预辐照剂量固定时，单体浓度在0～4.0wt%范围内，接枝率几乎呈线性增加。研究发现，丙烯酸(AA)接枝链能起到异相成核作用而促进预辐照聚丙烯(rPP)的结晶过程，但却不改变结晶晶型；虽然接枝反应可以部分抑制降解反应，但相对于原料聚丙烯(PP)，接枝产物的力学性能仍大大下降；因此提出的反应机理认为接枝反应主要是通过链断裂降解反应形成的端自由基引发的，从而形成了以端基接枝为主的产物。 为了控制PP接枝过程中的严重降解，本工作首次提出了均相和异相引发接枝反应的原理，即采用部分rPP和预辐照聚乙烯(rPE)分别作为PP接枝反应的均相和异相“引发剂”，经反应挤出制备丙烯酸功能化聚丙烯PP-g-AA。对于均相引发体系：（1）当rPP用量为20phr时，PP-g-AA的接枝率已经达到rPP-g-AA的水平，而且降解反应得到有效控制；（2）和PP/rPP-g-AA共混物的对比研究证明，均相引发接枝产物不但接枝率明显提高，而且接枝分布非常均匀；（3）由此提出均相引发主要是发生rPP和PP分子间夺氢反应并形成以基体PP接枝为主的产物，而rPP分子内夺氢反应形成的接枝产物rPP-g-AA只占较少比例。对于异相引发体系： （1）通过红外光谱表征及接枝率计算得出异相引发接枝产物的接枝率比相应的PP/ rPE-g-AA共混物略高；（2）由于rPE及rPE-g-AA对基体PP的结晶没有影响，通过异相引发接枝产物中PP的结晶温度升高直接验证了异相引发接枝反应的实现；（3）提出的机理认为异相引发主要发生在rPE的分子内夺氢并形成rPE-g-AA，造成rPE引发的PP分子间夺氢反应形成PP-g-AA产物的比例下降。 本工作还详细研究了rPP预辐照剂量、rPP用量和单体浓度对均相引发反应的影响。得到的结果如下：（1）高预辐照剂量导致了接枝率下降的“假相”是由于形成的微凝胶造成的；（2）rPP用量的增大在提高接枝率的同时也导致降解反应的逐渐增强；（3）单体浓度的增加导致接枝率的逐步提高并最终达到最大值，而且可能导致部分微凝胶的产生；（4）接枝没有破坏PP-g-AA结晶的完善性和晶型，却能促进了晶体在（040）晶面的生长并可能产生部分横晶形态；（5）PP-g-AA和金属能形成良好的粘接作用。 以上述制备的rPP-g-AA和PP-g-AA增容PP/聚对苯二甲酸丁二醇酯(PBT)共混体系，发现高分子量的PP-g-AA比低分子量的rPP-g-AA的增容效果要好，因此认为PP-g-AA和PBT通过酯化反应形成的长链接枝共聚物PP-g-PBT对PBT相的分散和界面作用增强更加有效。而随着增容剂PP-g-AA比例的增加，原位反应生成的PP-g-PBT逐渐增加，使得PBT相分散和界面增强效果更加显著，因此共混物的力学性能也更佳；DSC研究发现，随着PBT相尺寸减小到1μm以下，PBT出现了结晶受限行为。 将引发剂rPP和单体AA加入到PP/PBT共混体系中实现了一步法反应增容，得到共混物的扭矩、相形态、力学性能都和分步法增容共混物的结果几乎相同，这说明一步法共混能使PBT产生良好分散并得到性能较佳的产物，从而为高分子合金材料制备提供了一种简单有效的方法。 采用该方法对AA、马来酸酐(MAH)和甲基丙烯酸甘油酯(GMA)三种单体的接枝和增容反应对比研究证明，AA的效果最好，MAH次之，而GMA的效果最差，分析认为，AA和MAH通过接枝反应形成PP-g-AA和PP-g-MAH，随后再和PBT发生酯化增容反应形成PP-g-MAH-PBT共聚产物，而GMA首先和PBT反应形成PBT-GMA，而后由长链PBT-GMA发生接枝反应生成PP-g-GMA-g-PBT，但是这种接枝反应的效率很低，由此造成增容效果较差。

热可交联聚酰亚胺/高性能热塑性树脂共混体系的研究

1．热可交联聚酰亚胺／高性能热塑性树脂共混体系的研究聚苯硫醚［Poly（phenylene sulfide），PPS］是由刚性结构的苯环和柔性的硫醚连接起来，交替排列构成的线性高分子化合物，具有高的热稳定性、良好的耐化学药品性、优良的电绝缘性、耐老化性和阻燃性等综合性能优异的高性能树脂。聚醚矾〔Poly（ether sulfone），PES］是一种非结晶性的热塑性工程塑料一，具有优异的热稳定性、耐高温蠕变性及优异的物理机械性能。其高的玻璃化转变温度（Tg=225℃），使其可以在较高温度下作为结构材料使用。本论文研究了PPS/PES二元共混物的热性能和动态力学性能，并以热可控交联的低分子量多官能单体PMR-POI（聚醚酰亚胺）为界面增强剂，分别研究了POI与PPS、PES之间的接枝和／或交联反应，POI对PPS结晶行为的影响，POI对PES分子运动的影响和POI对PPS/PES共混体系的界面增强。主要结果如下：1．PPS/PES共混物相容性的特征在于选择性的部分相容，少量的非晶PPS分子可以扩散进入PES相区，相反的扩散过程则不会发生。2．PPS/PES共混物的热学性质和动态力学性能主要受连续相的控制。3．PPS相的性能主要受其结晶度的影响，因此能够改变其结晶度的因素均会改变PPS相的性质。4．光谱学和流变的证据表明，POI同PES，PPs共混过程中有接枝反应发生，分子链增长，分子量加大。这种接枝和／或交联反应的程度是热可控的。5．POI是PPS的增塑剂，成核剂和扩链剂，与POI共混使得PPS结晶速率增加，平衡熔点上升，表面折叠自由能降低。6；在PES/POI体系中Pol对PEs起到了增塑的作用，Tg降低，经高温热处理后Tg上升。因此，POI对PES性能的影响也是热可控的。7．PMR-POI能够在PPS/PES共混体系中有效地扩散并起到了降低分散相粒子的尺寸、增强界面的作用。它是该共混体系的有效界面增强剂。8．"高温退火既能够提高扩散速率也能够提高反应速率；二者相互竞争。2．马来酸配封端溉碳酸丙撑酯的研究二氧化碳与环氧丙烷交替共聚物（polypropylene careonate，PPC）是由二氧化碳活化并与环氧丙烷共聚而成的一类可完全生物降解的新型高分子材料，具有巨大的潜在应用价值。本论文讨论了马来酸配封端的聚碳酸丙撑酯（MA-PPC）和未封端的PPC的粘弹性、流变行为以及热降解和热分解行为，并得出如下结论：1．马来酸配封端抑制了PPC解拉链式的热分解和无规链断裂热降解，PPC的热稳定性和力学性能得到提高。2．PPC和MA-PPC在玻璃化转变温度有相似的自由体积分数，PPC的Tg比MA-PPC稍低。虽然PPC和MA-PPC玻璃化转变表观活化能E。和平均松弛时间T随温度升高单调降低，但PPC的分子运动对温度更敏感，而MA-PPC较稳定。马来酸配封端改变了PPC分子运动的特征及松弛行为，许多实验证据证明，这是由于封端后的PPC大分子链间的相互作用增强及分子链缠结密度增加。3．MA-PPC在70℃左右会发生脱水，实现大分子偶联反应并得到变温红外光谱、分子量成倍增加及线膨胀数据的有力支持。4．用零剪切粘度几。的方法测得PPC及MA－PPC加工过程中的热降解温度，它们分别为150℃和175℃，在此温度以上，η0降低速率的增加归因于大分子的主链断裂以及解拉链反应。5．测得了PPC的临界缠结分子量，它几乎是MA-PPC相应值（6613）的3倍。这表明马来酸配封端不仅改善了PPC的熔体弹性，而且也大大增强了PPC的缠结密度以及分子链间的相互作用。6．在本实验条件下在氮气和空气的气氛中，MA-PPC同PPC的热降解和热分解行为几乎一致，即在PPc的加土过程可以忽略氧气对其的影响。7．虽然MA-PPC的玻璃化温度在40℃左右，但在40℃-120℃的温度区间内，MA-PPC达不到粘流状态。8．没有剪切力时在120℃-150℃，30分钟内，MA-PPC几乎没有降解，在静态条件下，低于170℃时，MA-PPC的解拉链式降解是十分轻微的，当温度超过170℃，PPC降解相当严重。9．在热机械力存在的情况下，发生无规断链的机会增加，无规断链又会加速解拉链降解，因此实际加工中的加工窗口比静态下窄，MIA-PPC的加工窗口应为130℃-160℃。10．MA-PPC的热分解过程是一步完成的，热分解温度随升温速率的加快而提高，并计算出热分解的表观活化能为623.3KJ／mol。

无机刚性粒子增韧聚乙烯、聚丙烯的结构与性能研究

众所周知，聚乙烯、聚丙烯因其良好的加工性能及价格相对低廉而得到了广泛应用，但刚性和韧性的不足限制了它们在工程领域的应用。因此，提高聚乙烯、聚丙烯的刚性和韧性就成为高分子科学界和工程界一重要研究课题。本论文尝试用玻璃珠增韧聚云烯、聚丙烯，并系统研究体系的结构和性能，得到的主要结果有：1．成功实现了玻璃珠对高密度聚乙烯的增韧。在刚性、热稳定性显著提高的同时，玻璃珠增韧的高密度聚乙烯仍保持着很高的低温缺口冲击强度（-10℃，玻璃珠含量48wt％时，冲击强度为16KJ/m2）。2．得到了玻璃珠增韧高密度聚乙烯在脆韧转变点临界粒子间距（IDc）与温度的关系。这是第一条无机刚性粒子增韧热塑性聚合物体系的工Dc与温度的关系曲线。结果表明与弹性体增韧热塑性聚合物体系类似，工Dc随温度的升高而非线性增大。3．虽然没能在低温和常温下实现玻璃珠对聚丙烯的增韧，但是在较高的温度下仍发现了玻璃珠对聚丙烯有明显的增韧效果，且体系的脆韧转变温度随玻璃珠含量的增加而降低。4．用偏光显微镜（PLM）成功跟踪了所用聚丙烯p晶转变为仪晶的全过程。结果表明β晶能重结晶成以晶，重结晶生成的以晶熔点要比最初生成的a晶高五度左右。5．当聚丙烯存在两种晶型（a和β）时，实验发现聚丙烯／玻璃珠共混体系出现模量随玻璃珠含量增加先下降后上升的反常现象。进一步研究结果揭示该反常现象是玻璃珠填充和提高β晶形成能力二者竞争的结果6. 实验发现聚丙烯的β晶含量与添加玻璃珠的尺寸、含量及热处理温度有关。同样玻璃珠含量下粒子尺寸小有利于β晶的生成；对一定组成的共混物，存在一个最佳β晶形成温度。

有机碳对混合菌群亚硝酸盐氮氧化的影响

自养硝化过程在自然界氮素循环和污水处理系统脱氮过程中起着关键作用。因此，了解有机碳对硝化的影响和硝化菌与异养菌之间的竞争对微生物生态学和污水处理系统设计都很重要。目前对氨氧化到硝酸盐氮过程的研究文献很多，但对亚硝酸盐氧化过程在异养菌的存在下如何受到有机碳影响的研究甚少。本文从生理生化指标、基因组学、蛋白组学三方面考察了在实验室条件下有机碳（乙酸钠）对硝化细菌和异养菌组成的混合菌群的硝化性能、菌群结构及代谢功能的变化的影响。 全文分为两大部分： 第一部分为乙酸钠对游离态硝化混合菌群的硝化性能和菌群结构的短期影响。混合菌株先在自养条件下进行连续培养，两个月后硝化速率达到20 mg N/(L·d)；而后离心收集菌体进行批式实验。在批式反应器中，初始亚硝氮均为126mg N/ L，乙酸钠-C 与亚硝酸盐-N 的比分别为0，0.44，0.88，4.41，8.82。结果表明：在低C/N 比（0.44 和0.88）时，亚硝酸盐去除速率比C/N=0 下高，细菌呈现一次生长；而在高C/N 比（4.41 和8.82）时，出现连续的硝化反硝化，亚硝酸盐去除率仍比对照下高，细菌呈现二次生长。不同C/N 比下微生物群落明显不同，优势菌群从自养和寡营养细菌体系（包括亚硝酸盐氧化菌，拟杆菌门,α-变形菌纲,浮霉菌门和绿色非硫细菌下的一些菌株）过渡到异养和反硝化菌体系 （γ-变形菌纲的菌株尤其是反硝化菌Pseudomonas stutzeri 和P. nitroreducens 占主导）。 第二部分为乙酸钠对硝化混合菌群生物膜的硝化性能和菌群结构的长期影响。接种富集的硝化混合菌群于装有组合式填料的三角瓶中，于摇床中自养培养；两个月后填料上形成生物膜的硝化速率达到20 mg N/ (L·d)；而后进行长期实验，每12 小时更换混合营养培养基（亚硝氮约200 mg N/ L，C/N 比同上）。结果显示：相较于C/N 比=0 时的亚硝酸盐氧化反应来说，低C/N 比出现了部分的反硝化，而高C/N 比则是几乎完全的反硝化。与对照比，C/N=0.44 时亚硝酸盐氧化速率并未受乙酸钠的影响，反而上升了，但C/N=0.88 时亚硝酸盐氧化速率有所下降。菌群结构分析表明自养对照与混合营养下微生物群落的不同；PCR-DGGE未检测出混合营养下硝化杆菌的存在，而显示异养菌尤其是反硝化菌的大量存 在。荧光定量PCR 结果表明随C/N 比上升，硝化杆菌数量从2.42 × 104 下降到1.34× 103 16S rRNA gene copies/ ng DNA，反硝化菌由0 增加至2.51 × 104 nosZgene copies/ ng DNA。SDS-PAGE 的结果表明不同C/N 比下的蛋白组较为复杂且呈现一定的差异性。 有机碳对亚硝氮氧化及微生物群落的影响很复杂，本文分别讨论了对游离态和生物膜固定态两种状态的混合菌群相应的短期和长期影响研究。研究发现，有机碳并非一定带来硝化的负影响，如果控制在适当的C/N 比范围，有机碳是有利于亚硝氮氧化的。这些发现阐明了有机碳和硝化反硝化的关系，填补了硝化微生物生态学上的空白，对污水处理系统中减少异养菌的影响并提高氮去除率有一定理论指导意义。 Nitrification plays a key role in the biological removal of nitrogen in both nature and wastewater treatment plant (WWTP). So, understanding of the effect of organic carbon on nitrification and the competition between nitrifying bacteria and heterotrophic bacteria is important for both microbial ecology and WWTP design and operation. Despite the fact that the nitrification process of ammonia to nitrate has been extensively investigated, it is not known how the process of nitrite oxidization is affected by organic carbon when heterotrophic bacteria are present. By measuring different physiological and biochemical parameters, as well as using genomic DNA and proteome analysis, we investigated the influence of organic (acetate) on nitrite oxidizing performance, community structure and metabolic function of nitrite-oxidizing and heterotrophic bacteria under laboratory conditions. The dissertation involves two parts: Part one deals with the effect of organic matter on functional performance and bacterial community shift of nitrite-oxidizing and heterotrophic bacteria under suspended state. The bacteria were prepared in a continuous-flow stirred reactor under autotrophic condition; after two months, the nitrification rate of the culture reached about 20 mg N/ (L·d); then the bacteria were harvested for the next batch experiments. The initial concentrations of nitrite were 126 ± 6 mg N/ L in all flasks, and sodium acetate (C) to nitrite (N) ratios were 0, 0.44, 0.88, 4.41, and 8.82, respectively. The results showed that at low C/N ratios (0.44 or 0.88), the nitrite removal rate was higher than that obtained under autotrophic condition and the bacteria had single growth phase, while at high C/N ratios (4.41 or 8.82), continuous aerobic nitrification and denitrification occurred besides higher nitrite removal rates, and the bacteria had double growth phases. The community structure of total bacteria strikingly varied with the different C/N ratios; the dominant populations shifted from autotrophic and oligotrophic bacteria (NOB, and some strains of Bacteroidetes, Alphaproteobacteria, Actinobacteria, and green nonsulfur bacteria) to heterotrophic and denitrifying bacteria (strains of Gammaproteobacteria, especially Pseudomonas stutzeri and P. nitroreducens). Part two describes the influence of acetate on nitrite oxidizing performance, community structure and metabolic function of nitrite-oxidizing and heterotrophic bacteria in biofilms. Bacterial enrichments was transferred into flasks with polypropylene carriers and cultured under agitated and autotrophic condition. After two month, the biofilms grown on the carriers had a nitrification rate of about 20 mg N/ (L·h); then the biofilms were refreshed with mixotrophic medium (nitrite were 200 mg N/ L in all flasks, and C/N ratios was the same as above) every 12 h. the results show: normal nitrite oxidization reactions were performed when C/N = 0, but nitrite oxidization and partial denitrification occurred with low C/N ratios (0.44 or 0.88). At high C/N ratios (4.41 or 8.82), we mainly observed denitrification. In contrast to C/N = 0, the nitrite oxidization rate was unaffected when C/N = 0.44, but decreased with C/N = 0.88. The structure of bacterial communities varied significantly between autotrophic and mixotrophic conditions. Nitrobacter was hard to detect by PCR-DGGE while heterotrophs and especially denitrifiers were in the majority under mixotrophic conditions. Real-time PCR indicated that the Nitrobacter population decreased from 2.42 × 104 to 1.34 × 103 16S rRNA gene copies/ ng DNA, while the quantity of denitrifiers obviously increased from 0 to 2.51×104 nosZ gene copies/ ng DNA with an increasing C/N ratio. SDS-PAGE indicated the complexity of and a certain difference between the proteome of nitrite-oxidizing and heterotrophic bacteria at different C/N ratios. We conclude that the influence of organic matter on nitrite oxidation and the community structure of NOB and heterotrophic bacteria is complex. In this dissertation, we focused on how sodium acetate influenced the system both under suspended state and in biofilms. We observed that acetate did not necessarily have a negative impact on nitrification. Instead, an appropriate amount of acetate benefited both nitrite oxidization and denitrification. These findings provide a greater understanding about the relationship between organics and nitrification; they fill the gaps in the field of microbial ecology of nitrifying bacteria; they also provide insight into how to minimize the negative impact of heterotrophic bacteria and maximize the benefit of nitrogen removal in biological treatment systems.