Velocidade de semeadura e profundidade da haste em sistema plantio direto de milho e soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Caracterização molecular de Colletotrichum acutatum e C. gloeosporioides associados a citros, por marcadores ISSR

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Atributos produtivos e qualitativos de grãos e fisiológicos e sanitários das sementes de cultivares de feijão

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Doses, fontes e épocas de aplicação de nitrogênio influenciando teores de clorofila e produtividade do trigo

To achieve high wheat yield, correct management of N fertilization and the use of high yield potential cultivars are necessary. The aim of this study was to evaluate the effects of different application rates and sources of N, applied totally at sowing or in topdressing, on grain yield and yield components of two irrigated wheat cultivars under a no-till system, grown in a Cerrado (Brazilian tropical savanna) region of low altitude. A randomized block design was used in a 5 x 3 x 2 x 2 factorial arrangement with three replications, combining five levels of N (0, 50, 100, 150, and 200 kg ha(-1)), three sources of N (Entec (R), ammonium sulfate, and urea), and two application times (at sowing, near the rows, or in topdressing) in two wheat cultivars (IAC 370 and Embrapa 21). The wheat cultivars had similar grain yields. There was no difference among the sources of N for grain yield and yield components. The N applied totally at sowing did not differ from the traditional application at sowing and in topdressing for production of irrigated wheat in no-tillage. The increase in application rates of N increased the leaf N contents and chlorophyll, plant height, and the number of ears per m(2). Grain yield of the wheat cultivars IAC 370 and Embrapa 21 increased up to the application rates of 134 and 128 kg ha(-1) of N, respectively, regardless of application time and source of N. The positive correlation between chlorophyll leaf content and grain yield in accordance with N fertilization levels indicates that N fertilization in topdressing can be recommended based on SPAD readings of leaf chlorophyll performed at 38 days after wheat plant emergence.

Early growth of common bean cropped over ruzigrass residues

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos da polpação kraft, branqueamento e refino de eucalyptus grandis x eucalyptus urophylla

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Increase of leishmanicidal and tubercular activities using steroids linked to aminoquinoline

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de Híbridos Simples Experimentais de Milho (Zea Mays L.)

Pós-graduação em Agronomia - FEIS

Variáveis morfológicas da cana-de-açúcar em função do regime hídrico durante o desenvolvimento inicial

Water deficit is one of the factors which most limit agriculture yield and growth. Although sugar cane has moderate tolerance to drought, it presents high yield losses under the influence of this abiotic factor. Based on this fact, selection of genotypes tolerant to water stress may represent an alternative for decreasing the amount of water used for irrigation, while keeping or increasing yield. This study was performed in order to evaluate the performance of four sugarcane cultivars during initial development under water stress conditions, by means of morphological variables to select more tolerant genotypes to drought. The experiment was carried out in a greenhouse at the Department of Rural Engineering, College of Agricultural Sciences - UNESP/Botucatu – SP, from November 26th 2010 to April 5th 2011. A total of four sugar cane cultivars were evaluated (RB855453, RB92579, RB965902 and RB965917) under two treatments as follows: control (100% field capacity) and water stress (50% field capacity). Evaluations were performed at 0, 28 and 63 days after treatment application. The following morphological variables were analyzed: plant height, leaf area, leaf length, leaf width, number of green leaves, shoot and root dry matter. The RB855453 and RB92579 cultivars produced more shoot and root dry matter under water stress treatment, while the RB965902 and RB965917 cultivars had lower shoot and root dry matter production under the same conditions. Therefore, the RB855453 and RB 92579 cultivars can be considered tolerant while the RB965902 and RB965917 cultivars can be considered susceptible.

Bioprospecção do fungo endofítico Hypoxylon investiens associado à alga marinha Asparagopsis taxiformis: potencial antifúngico, anticolinesterásico e antitumoral

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Manejo e conservação genética In Situ, Acrocomia aculeata (Jacq.) Lodd. Ex Mart. no pontal do Paranapanema

Pós-graduação em Agronomia - FEIS

Influência de elementos terras raras nas propriedades catalíticas de óxidos derivados de hidrotalcitas para produção de biodiesel etílico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Transient transfection of serum-free suspension HEK 293 cell culture for efficient production of human rFVIII

Abstract Background Hemophilia A is a bleeding disorder caused by deficiency in coagulation factor VIII. Recombinant factor VIII (rFVIII) is an alternative to plasma-derived FVIII for the treatment of hemophilia A. However, commercial manufacturing of rFVIII products is inefficient and costly and is associated to high prices and product shortage, even in economically privileged countries. This situation may be solved by adopting more efficient production methods. Here, we evaluated the potential of transient transfection in producing rFVIII in serum-free suspension HEK 293 cell cultures and investigated the effects of different DNA concentration (0.4, 0.6 and 0.8 μg/106 cells) and repeated transfections done at 34° and 37°C. Results We observed a decrease in cell growth when high DNA concentrations were used, but no significant differences in transfection efficiency and in the biological activity of the rFVIII were noticed. The best condition for rFVIII production was obtained with repeated transfections at 34°C using 0.4 μg DNA/106 cells through which almost 50 IU of active rFVIII was produced six days post-transfection. Conclusion Serum-free suspension transient transfection is thus a viable option for high-yield-rFVIII production. Work is in progress to further optimize the process and validate its scalability.

De Novo Design of secondary structures: Synthesis and conformational studies

Chemists have long sought to extrapolate the power of biological catalysis and recognition to synthetic systems. These efforts have focused largely on low molecular weight catalysts and receptors; however, biological systems themselves rely almost exclusively on polymers, proteins and RNA, to perform complex chemical functions. Proteins and RNA are unique in their ability to adopt compact, well-ordered conformations, and specific folding provides precise spatial orientation of the functional groups that comprise the “active site”. These features suggest that identification of new polymer backbones with discrete and predictable folding propensities (“foldamers”) will provide a basis for design of molecular machines with unique capabilities. The foldamer approach complements current efforts to design unnatural properties into polypeptides and polynucleotides. The aim of this thesis is the synthesis and conformational studies of new classes of foldamers, using a peptidomimetic approach. Moreover their attitude to be utilized as ionophores, catalysts, and nanobiomaterials were analyzed in solution and in the solid state. This thesis is divided in thematically chapters that are reported below. It begins with a very general introduction (page 4) which is useful, but not strictly necessary, to the expert reader. It is worth mentioning that paragraph I.3 (page 22) is the starting point of this work and paragraph I.5 (page 32) isrequired to better understand the results of chapters 4 and 5. In chapter 1 (page 39) is reported the synthesis and conformational analysis of a novel class of foldamers containing (S)-β3-homophenylglycine [(S)-β3-hPhg] and D- 4-carboxy-oxazolidin-2-one (D-Oxd) residues in alternate order is reported. The experimental conformational analysis performed in solution by IR, 1HNMR, and CD spectroscopy unambiguously proved that these oligomers fold into ordered structures with increasing sequence length. Theoretical calculations employing ab initio MO theory suggest a helix with 11-membered hydrogenbonded rings as the preferred secondary structure type. The novel structures enrich the field of peptidic foldamers and might be useful in the mimicry of native peptides. In chapter 2 cyclo-(L-Ala-D-Oxd)3 and cyclo-(L-Ala-DOxd) 4 were prepared in the liquid phase with good overall yields and were utilized for bivalent ions chelation (Ca2+, Mg2+, Cu2+, Zn2+ and Hg2+); their chelation skill was analyzed with ESI-MS, CD and 1HNMR techniques and the best results were obtained with cyclo-(L-Ala-D-Oxd)3 and Mg2+ or Ca2+. Chapter 3 describes an application of oligopeptides as catalysts for aldol reactions. Paragraph 3.1 concerns the use of prolinamides as catalysts of the cross aldol addition of hydroxyacetone to aromatic aldeydes, whereas paragraphs 3.2 and 3.3 are about the catalyzed aldol addition of acetone to isatins. By means of DFT and AIM calculations, the steric and stereoelectronic effects that control the enantioselectivity in the cross-aldol addition of acetone to isatin catalysed by L-proline have been studied, also in the presence of small quantities of water. In chapter 4 is reported the synthesis and the analysis of a new fiber-like material, obtained from the selfaggregation of the dipeptide Boc-L-Phe-D-Oxd-OBn, which spontaneously forms uniform fibers consisting of parallel infinite linear chains arising from singleintermolecular N-H···O=C hydrogen bonds. This is the absolute borderline case of a parallel β-sheet structure. Longer oligomers of the same series with general formula Boc-(L-Phe-D-Oxd)n-OBn (where n = 2-5), are described in chapter 5. Their properties in solution and in the solid state were analyzed, in correlation with their attitude to form intramolecular hydrogen bond. In chapter 6 is reported the synthesis of imidazolidin-2- one-4-carboxylate and (tetrahydro)-pyrimidin-2-one-5- carboxylate, via an efficient modification of the Hofmann rearrangement. The reaction affords the desired compounds from protected asparagine or glutamine in good to high yield, using PhI(OAc)2 as source of iodine(III).

Microrganismi probiotici per le piante: una strategia di riduzione degli input nella coltura del pomodoro col metodo biologico

In the recent years, consumers became more aware and sensible in respect to environment and food safety matters. They are more and more interested in organic agriculture and markets and tend to prefer ‘organic’ products more than their traditional counterparts. To increase the quality and reduce the cost of production in organic and low-input agriculture, the 6FP-European “QLIF” project investigated the use of natural products such as bio-inoculants. They are mostly composed by arbuscular mycorrhizal fungi and other microorganisms, so-called “plant probiotic” microorganisms (PPM), because they help keeping an high yield, even under abiotic and biotic stressful conditions. Italian laws (DLgs 217, 2006) have recently included them as “special fertilizers”. This thesis focuses on the use of special fertilizers when growing tomatoes with organic methods in open field conditions, and the effects they induce on yield, quality and microbial rhizospheric communities. The primary objective was to achieve a better understanding of how plant-probiotic micro-flora management could buffer future reduction of external inputs, while keeping tomato fruit yield, quality and system sustainability. We studied microbial rhizospheric communities with statistical, molecular and histological methods. This work have demonstrated that long-lasting introduction of inoculum positively affected micorrhizal colonization and resistance against pathogens. Instead repeated introduction of compost negatively affected tomato quality, likely because it destabilized the ripening process, leading to over-ripening and increasing the amount of not-marketable product. Instead. After two years without any significant difference, the third year extreme combinations of inoculum and compost inputs (low inoculum with high amounts of compost, or vice versa) increased mycorrhizal colonization. As a result, in order to reduce production costs, we recommend using only inoculum rather than compost. Secondly, this thesis analyses how mycorrhizal colonization varies in respect to different tomato cultivars and experimental field locations. We found statistically significant differences between locations and between arbuscular colonization patterns per variety. To confirm these histological findings, we started a set of molecular experiments. The thesis discusses preliminary results and recommends their continuation and refinement to gather the complete results.