Mitochondrial DNA markers to identify commercial spiny lobster species (Panulirus spp.) from the Pacific coast of Mexico: an application on phyllosoma larvae

Molecular markers based on mitochondrial DNA (mtDNA) are extensively used to study genetic relationships. mtDNA has been used in phylogenetic studies to understand the evolutionary history of species because it is maternally inherited and is not subject to genetic recombination (Gyllensten et al., 1991). The high mutation rate of mtDNA makes it a useful tool for differentiating between closely related species (Brown et al., 1979)—a tool that is especially important when significant variations occur between species, but not within species (Hill et al., 2001; Blair et al., 2006; Chow et al., 2006a).

Demand for fish in Sub-Saharan Africa: the past and the future

The Sub-Saharan region of Africa accounted for only 5.5% of the world's demand for fish from 1989 to 1991, inspite of comprising 9% of the global population. This study was carried out to determine the future demand for fish in the Sub-Saharan region. Fish accounts for approximately 10% of animal protein consumed. It is prominent in the diet of the poor since cured and smoked fish is a cheaper source of protein than meat or eggs. The average per capita consumption in 1992 was about 8 kg compared to 30 kg globally. Fish is prominent in the diets of people near coastal areas and large inland water bodies and a total of 40% of fish consumed is freshwater fish. Consumption is rising in the coastal areas but falling inland, probably due to drought and overexploitation resulting in an inadequate supply. Aquaculture has not been widely adopted and does not contribute substantially to the region's supply. To determine future demand and trends, a regression analysis was carried out at the country level with FAO data on fish consumption from 1960 to 1992, using several proxies for disposable income, cost of fishery products, changes in tastes and national differences in the tradition of fish consumption. An aggregate increase in fish consumption of nearly 2.7% annually over the next few years was predicted with a strong correlation between increases in income, prices and population. Real income was a significant and positive determinant of fish consumption, even though consumption increaed more slowly than income. Given the high projected rate of population increase, the growth rate in overall fish consumption actually implies a reduction in per capita fish consumption of 0.31% annually. If technological progress can improve production and supply, aquaculture could have a significant impact on fish consumption in the region.

Pen fish culture in reservoirs: an alternative to land based nurseries

An experiment to rear carp seed was conducted in Tamil Nadu, India during October 2001 to April 2002 as a part of an ambitious programme aimed at standardization of pen fish rearing technology for production of stocking material of desired size at a lower cost. The experiment used six pens erected using locally available materials in the exposed marginal area of an existing reservoir. The high survival rate of carps (67.2-94.7%) and reasonable returns on investment (26.2%) obtained in the experiment indicated that fish seed rearing in pens erected in suitable areas of existing reservoirs could serve as a cheaper alternative to the expensive land-based nursery ponds.

Posicionamento dinâmico utilizando controle a estrutura variável e servovisão.

Neste trabalho é apresentado o desenvolvimento de um sistema de posicionamento dinâmico para uma pequena embarcação baseado em controle a estrutura variável com realimentação por visão computacional. Foram investigadas, na literatura, diversas técnicas desenvolvidas e escolheu-se o controle a estrutura variável devido, principalmente, ao modo de acionamento dos propulsores presentes no barco utilizado para os experimentos. Somando-se a isto, foi considerada importante a robustez que a técnica de controle escolhida apresenta, pois o modelo utilizado conta com incerteza em sua dinâmica. É apresentado ainda o projeto da superfície de deslizamento para realizar o controle a estrutura variável. Como instrumento de medição optou-se por utilizar técnicas de visão computacional em imagens capturadas a partir de uma webcam. A escolha por este tipo de sistema deve-se a alta precisão das medições aliada ao seu baixo custo. São apresentadas simulações e experimentos com controle a estrutura variável em tempo discreto utilizando a integral do erro da posição visando eliminar o erro em regime. Para realizar o controle que demanda o estado completo, são comparados quatro estimadores de estado realizados em tempo discreto: derivador aproximado; observador assintótico com uma frequência de amostragem igual a da câmera; observador assintótico com uma frequência de amostragem maior que a da câmera; e filtro de Kalman.

Biofiltração de compostos orgânicos voláteis e gás sulfídrico em estações de despejos industriais de processamento de hidrocarbonetos.

Neste trabalho foi estudado o tratamento simultâneo por biofiltração de emissões de compostos orgânicos voláteis, COV e gás sulfídrico, H2S, em estações de tratamento de despejos industriais, de refinaria de petróleo, ETDI. A biofiltração dos gases emanados da EDTI mostrou ser uma técnica de alta eficiência, atingindo valores de 95 a 99 % para tratamento simultâneo de COV e H2S em concentrações de 1000 e 100 ppmv, respectivamente. Foram realizados testes em 95 dias consecutivos de operação, em uma planta piloto instalada na Superintendência da Industrialização do Xisto, SIX, em São Mateus do Sul, Paraná, de março a agosto de 2006. O biofiltro foi do tipo fluxo ascendente, com 3,77 m3 de leito orgânico, composto de turfa, carvão ativado, lascas de madeira, serragem brita fina além de outros componentes menores. Foi realizada inoculação biológica com lodo filtrado de estação de tratamento de esgoto sanitário. As vazões de gás aplicadas variaram de 85 a 407 m3/h, resultando em taxas de carga de massa de 11,86 a 193,03 g de COV/h.m3 de leito e tempos de residência de 24 segundos a 6,5 minutos, com tempo ótimo de 1,6 minutos. A capacidade máxima de remoção do sistema encontrada, nas condições testadas, foi de 15 g de COV/h. m3, compatível com os valores encontrados na literatura para depuração biológica de COV na escala praticada. Também foi verificada a redução de componentes específicos de BTX, demonstrando boa degradabilidade dos compostos orgânicos. Finalmente o biofiltro demonstrou boa robustez biológica diante dos desvios operacionais intencionalmente provocados, tais como falta de umidade do leito, baixa temperatura, alta vazão, falta de carga de COV e baixo pH do leito. Depois de retomada a condição de operação estável, a biofiltração rapidamente atingiu o estado de equilíbrio, assegurando o uso eficiente e confiável da técnica no tratamento de gases de EDTI na indústria do hidrocarbonetos ou em refinarias de petróleo.

Caracterização da distribuição de alelos de loci STR do cromossomo Y com elevada taxa de mutação em uma amostra populacional do Rio de Janeiro

Marcadores genéticos presentes no cromossomo Y, como os microssatélites (Y-STRs) e polimorfismos de único nucleotídeo (Y-SNPs) são utilizados na caracterização de linhagens masculinas, visto que são transmitidos às gerações seguintes sem alterações, a menos que ocorram mutações (Singh et al., 2011; Mitchell & Hammer, 1996; Butler, 2009). Por isso, esses marcadores são amplamente empregados em diversas situações, destacando-se o uso constante dos Y-STRs na genética forense por apresentarem alta capacidade de discriminar linhagens. Recentemente, foram descritos 13 marcadores com taxas de mutação substancialmente superiores àquelas verificadas para loci STR do cromossomo Y, denominados Rapidly Mutating (RM) Y-STRs (Ballantyne et al., 2010; Kayser et al., 2012). Devido às taxas de mutação elevadas, os RM-YSTRs apresentam maior eficiência na discriminação entre indivíduos proximamente relacionados, pertencentes à mesma linhagem patrilínea. O presente trabalho buscou aprofundar o conhecimento acerca das características populacionais e mutacionais dos loci RM-YSTRs em amostra do Rio de Janeiro, contribuindo com estudos desta natureza na população brasileira. Realizou-se a análise de 13 loci do cromossomo Y em 258 indivíduos do sexo masculino, compondo 129 pares de pais e filhos, nascidos no estado do Rio de Janeiro. O DNA das amostras foi extraído, conforme os protocolos vigentes na rotina do LDD-UERJ. As sequências genéticas de interesse foram amplificadas pela técnica de reação em cadeira da polimerase (PCR) através da realização de três PCR multiplex, cujos produtos de amplificação foram separados por eletroforese em sequenciador automático ABI-3500 (Applied Biosystems). Para os pares pai/filho que apresentaram haplótipos mutados, empregou-se a técnica de sequenciamento para confirmação das mutações. Os loci RM-YSTR geraram um poder de discriminação de 1,0 na amostra analisada, o que significa que todos os 129 indivíduos da amostra populacional apresentaram haplótipos diferentes para tais marcadores, com frequências de 0,0077 e diversidade haplotípica igual a 1. Além disso, foram obtidos valores elevados de diversidade gênica para os 13 marcadores. A análise de distância genética e os resultados de AMOVA baseados nos valores de Fst demonstraram que os RM-YSTR não indicam subdivisão populacional e traços ancestrais comuns. Tais valores estão associados às elevadas taxas de mutação encontradas, cuja média foi de 2,11 x 10-2. Foi possível observar que os loci RM-YSTR são muito discriminativos na amostra miscigenada analisada, além de terem maior capacidade de diferenciar indivíduos do que outros conjuntos de marcadores normalmente usados em estudos populacionais e análises forenses. Sendo assim, é possível concluir que os marcadores RM-YSTR são promissores para discriminar indivíduos da mesma linhagem patrilínea, visto que devido às suas elevadas taxas mutacionais e poder de discriminação, são capazes de diferenciar indivíduos de maneira mais eficiente do que os outros conjuntos de STR. Porém, é necessário maior número de estudos para melhor caracterização destes loci em diferentes populações.

Genetic improvement of freshwater prawn, Macrobrachium rosenbergii (de Man) in India. Phase two: annual report for period January to December 2012

Macrobrachiurn rosenbergii is one of the widely cultured freshwater prawn species globally. India was the third largest producer of this species in 2007 and its aquaculture production rose to 43,000 metric tons (t) in 2005 froin less than 500 t in 1995. However, since then production has been declining and in 2008-09 it was 12,856 t, a reduction of more than 70% compared to 2005. There are several contributing factors to this decline, such as slow growth rate, poor survival, disease outbreaks, increase in cost of production, and availability of low risk alternative fish species. However, there is a consensus that poor seed quality leading to unsatisfactory growth and survival rates in ponds is one of the major reasons. Hence, the development of a systematic selective breeding program aimed at improving growth rate and ensuring high survival rate of this species was deemed a high priority. The Central Institute of Freshwater Aquaculture (CIFA), Bhubaneswar, India in collaboration with the WorldFish Center, Malaysia initiated a selective breeding program for this species in 2007.

Wear of hardfacing white cast irons by solid particle erosion

The response of three commercial weld-hardfacing alloys to erosive wear has been studied. These were high chromium white cast irons, deposited by an open-arc welding process, widely used in the mineral processing and steelmaking industries for wear protection. Erosion tests were carried out with quartz sand, silicon carbide grit and blast furnace sinter of two different sizes, at a velocity of 40 m s-1 and at impact angles in the range 20° to 90°. A monolithic white cast iron and mild steel were also tested for comparison. Little differences were found in the wear rates when silica sand or silicon carbide grit was used as the erodent. Significant differences were found, however, in the rankings of the materials. Susceptibility to fracture of the carbide particles in the white cast irons played an important role in the behaviour of the white cast irons. Sinter particles were unable to cause gross fracture of the carbides and so those materials with a high volume fraction of carbides showed the greatest resistance to erosive wear. Silica and silicon carbide were capable of causing fracture of the primary carbides. Concentration of plastic strain in the matrix then led to a high wear rate for the matrix. At normal impact with silica or silicon carbide erodents mild steel showed a greater resistance to erosive wear than these alloys. © 1995.

Ultrafast all-optical wavelength conversion using an integrated amplifier/DFB laser

Wavelength conversion in the 1550 nm regime was achieved in an integrated semiconductor optical amplifier (SOA)/DFB laser by modulating the output power of the laser with a light beam of a different wavelength externally injected into the SOA section. A 12 dB output extinction ratio was obtained for an average coupled input power of 75 μW with the laser section driven at 65 mA and the amplifier section at 180 mA. The response time achieved was as low as 13 ps with the laser biased at 175 mA even with low extinction ratios. The laser exhibits a similar recovery time allowing potentially very high bit-rate operation.

Recent developments of the Laser-assisted Cold Spray process and deposit characterisation

Laser-assisted Cold Spray (LCS) is a new coating and fabrication process which combines the supersonic powder beam found in Cold Spray (CS) with laser heating of the deposition zone. LCS retains the advantages of CS; solid-state deposition, high build rate and the ability to deposit onto a range of substrates, while reducing operating costs by removing the need to use gas heating and helium as the process gas. Recent improvements in powder delivery and laser energy coupling to workpiece have been undertaken to improve deposition efficiency (DE) and build rate, while real-time temperature logging allows greater management of deposition conditions and deposit characteristics.

Gene admixture in the Silk Road region of China: Evidence from mtDNA and melanocortin 1 receptor polymorphism

Mitochondrial DNA control region segment I sequences and melanocortin 1 receptor (MC1R) gene polymorphism were examined in ethnic populations in the silk road region of China. Both the frequencies of the MC1R variants and the results of mtDNA data in this region presented intermediate values between those of Europe and East and Southeast Asia, which suggested extensive gene admixture in this area and was in general agreement with previous studies. Phylogenetic analysis of the ethnic populations in the Silk Road region that based on mtDNA data didn't show expected cluster pattern according to their ethnogenesis. We suspect that a high migration rate in female among these closely related populations and other three demographic events might account for it.

Microalgal community structure in experimental carp-pangasiid catfish polyculture ponds

Microalgal community structure in experimental carp-pangasiid catfish polyculture ponds under four different stocking rates (treatments) each with three replications in the Field Laboratory of the Faculty Fisheries, Bangladesh Agricultural University, Mymensingh was studied. A total of 38 microalgal genera were identified under four major groups: 18 genera belong to Chlorophyceae, 9 to Cyanophyceae, 8 to Bacillariophyceae and 3 to Euglenophyceae. Chlorophyceae was abundant in all treatments followed by Cyanophyceae, Bacillariophyceae and Euglenophyceae throughout the study period. The cell densities of total microalgal population varied between 51.66x10^3 cells/L in June in T1 and 126.4x10^3 cells/L in August in T2. The appearance of Microcysris, Oscillatoria, Gomphospheria, Hildenbrandia, Chlorella, Scenedesmus, Cyclotella, Navicula, Nitzschia, Euglena and Phacus as dominant genera throughout the study period may related to sufficient nutrient availability, good light conditions and high growth rate of these genera. Water quality parameters of the experimental ponds were within suitable range for microalgal production and fish culture though the nutrient (nitrate-nitrogen and phosphate-phosphorus) concentrations were high. The factors involved in structuring a phytoplankton community arise from the relationship generated by physical, chemical and biological conditions especially the stocked planktivorous carps. Microalgal bloom formation is very common in pangasiid catfish monoculture ponds but in the present study bloom was not formed and the algal species diversity was found to be slightly increased with the study period. The introduction carps of carps in the experimental ponds might have helped in controlling the microalgal bloom formation and maintenance of the species diversity.

Impact response of polyethylene nanocomposites

The quasi-static and dynamic behaviour of Linear Low Density Polyethylene (LLDPE) and two LLDPE nanocomposites were studied. Nanocomposites consisting of LLDPE filled with 1% carbon black and 0.5% nanoclay fillers, by weight, were considered. Under quasi-static tensile loading, an improvement in the energy absorbing capability was achieved by adding 1% carbon black fillers. However, during quasi-static puncture and dynamic impact loading, the advantage provided by the fillers was lost. Thermal softening due to adiabatic heating under high strain rate deformation and difference s in the state of stress are considered as reasons for this reduction. © 2011 Published by Elsevier Ltd.

Growth and survival of Penaeus monodon postlarvae fed shrimp head meal and fish meal as primary animal source of protein

Although shrimp head meal alone does not provide for good growth and survival, fish meal can provide high survival rate. The addition of shrimp head improves this diet. It is suggested that cholesterol present in shrimp could have caused this difference. Composition of the test diets is tabulated, as are proximate chemical analysis of the diets, and the mean initial weights, final weights, weight gains, survival rate, feed consumed, protein consumed, of Penaeus monodon postlarvae, feed conversion and protein efficiency ratio.

Studies on cultural conditions of marine Chromatium buderi Truper and Jannasch 1968

Photosynthetic characteristics of a purple sulfur bacterium, Chromatium buderi, cultured under different ranges of pH, temperature, light intensities and ammonium chloride concentrations were examined. Maximum bacteriochlorophyll a synthesis was observed at pH 6.5 whereas the optimum growth was at pH 8.0. In general, higher temperature tended to inhibit the chlorophyll a synthesis and growth. 30°C is the optimum temperature both for chlorophyll a synthesis and growth. At 25µE mˉ²Sˉ¹ the bacteriochlorophyll a content and growth attained maximum level. The response to this low light intensity is an adaptation that ensures a high photosynthetic rate for the purple sulfur bacterium that usually occurs in dimly lit environment. Besides these, ammonium chloride at low concentration enhances both chlorophyll a synthesis and growth. Above 0.5% of it causes the nitrogen-chlorosis and also retards the growth of the bacterium. Possible chemical and structural mechanisms involved are discussed.