Responses of sugarcane, maize, and soybean to phosphorus and vesicular-arbuscular mycorrhizal fungi

The presence of vesicular-arbuscular mycorrhizal (VAM) fungi in long-term cane-growing fields associated with yield decline led to the supposition that VAM fungi may be responsible for the poor yields. A glasshouse trial was established to test the effectiveness of a species of VAM fungi, Glomus clarum, extracted from one of these North Queensland fields on the growth of sugarcane (Saccharum interspecific hybrid), maize (Zea mays), and soybean (Glycine max) for 6 phosphorus (P) rates (0, 2.7, 8.2, 25, 74, 222 mg/kg). For maize and soybean plants that received VAM (+ VAM), root colonisation was associated with enhanced P uptake, improved dry weight (DW) production, and higher index tissue-P concentrations than those without VAM (-VAM). By comparing DW responses of maize and soybean for different P rates, savings in fertiliser P of up to 160 and 213 kg/ha, respectively, were realised. Sugarcane plants were generally less responsive. Apart from a 30% DW increase with VAM when 2.7 mg P/kg was added, DW of +VAM plants was equivalent to, or worse than in the case of 222 mg P/kg, DW of -VAM plants. For all 3 host species, colonisation was least at the highest P application, presumably from excessive P within the plant tissue. Critical P concentrations for the 3 host species were below those reported elsewhere, and for soybean and sugarcane, the critical concentration for +VAM plants was lower than that of -VAM plants. There are 3 implications that arise from this study. First, VAM fungi present in cane-growing soils can promote the growth of maize and soybean, which are potential rotation crops, over a range of P levels. Second, the mycorrhizal strain taken from this site did not generally contribute to a yield decline in sugarcane plants. Third, application of P fertiliser is not necessary for sugarcane when acid-extractable P is

Host selection and utilisation of Sonchus oleraceus (Asteraceae) by Helicoverpa armigera (Lepidoptera : Noctuidae): A genetic analysis

The cotton bollworm (Helicoverpa armigera) prefers the common sowthistle (Sonchus oleraceus L.) to cotton (Gossypium hirsutum L.), sorghum (Sorghum bicolor L.) and maize (Zea mays L.) for oviposition in the field in Australia. Using the common sowthistle and cotton as host plants, we carried out this study to evaluate genetic variation in both oviposition preference and larval growth and genetic correlation between maternal preference and larval performance. There was a significant genetic component of phenotypic variation in both characters, and the heritability of oviposition preference was estimated as 0.602. Helicoverpa armigera larvae survived slightly better and grew significantly faster on common sowthistle than on cotton, but genetic correlation between maternal preference and larval growth performance was not detectable. Instead, larval growth performance on the two hosts changed with families, which renders the interaction between family and host plant significant. As a result, the genetic correlation between mean values of larval growth across the two host species was not different from zero. These results are discussed in the context of the relationship between H. armigera and the common sowthistle and the polyphagous behaviour of this insect in general.

Field test of a model of migration of moths (Lepidoptera : Noctuidae) in inland Australia

A migration of Helicoverpa punctigera (Wallengren), Heliothis punctifera (Walker) and Agrotis munda Walker was tracked from Cameron Corner (29degrees00'S, 141degrees00'E) in inland Australia to the Wilcannia region, approximately 400 km to the south-east. A relatively isolated source population was located using a distribution model to predict winter breeding, and confirmed by surveys using sweep netting for larvae. When a synoptic weather pattern likely to produce suitable conditions for migration developed, moths were trapped in the source region. The next morning a simulation model of migration using wind-field data generated by a numerical weather-prediction model was run. Surveys using sweep netting for larvae, trapping and flush counts were then conducted in and around the predicted moth fallout area, approximately 400 km to the south-east. Pollen carried on the probosces of moths caught in this area was compared with that on moths caught in the source area. The survey data and pollen comparisons provided evidence that migration had occurred, and that the migration model gave accurate estimation of the fallout region. The ecological and economic implications of such migrations are discussed.

Augmentation of the assassin bug Pristhesancus plagipennis (Walker) (Hemiptera : Reduviidae) as a biological control agent for Helicoverpa spp. in cotton

Third-instar nymphs of the Australian assassin bug, Pristhesancus plagipennis (Walker), were released into cotton plots at two release densities and two crop growth stages to test their biological control potential. Release rates of 2 and 5 nymphs per metre row resulted in field populations of 0.51 and 1.38 nymphs per metre row, respectively, indicating that over 70% of nymphs died or emigrated within two weeks of release. Effective release rates of 1.38 nymphs per metre row reduced the number of Helicoverpa spp. larvae in the plots for a 7-week period. Crop yields were significantly greater in the plots to which P. plagipennis nymphs were released, with the effective release rate of 1.38 nymphs per metre row providing equivalent yields as insecticide treated plots. The data suggest that P. plagipennis has the capacity to reduce Helicoverpa spp. larvae densities in cotton crops when augmented through inundative release.

Testing insect movement theory: empirical analysis of pest data routinely collected from agricultural crops

Observations of an insect's movement lead to theory on the insect's flight behaviour and the role of movement in the species' population dynamics. This theory leads to predictions of the way the population changes in time under different conditions. If a hypothesis on movement predicts a specific change in the population, then the hypothesis can be tested against observations of population change. Routine pest monitoring of agricultural crops provides a convenient source of data for studying movement into a region and among fields within a region. Examples of the use of statistical and computational methods for testing hypotheses with such data are presented. The types of questions that can be addressed with these methods and the limitations of pest monitoring data when used for this purpose are discussed. (C) 2002 Elsevier Science B.V. All rights reserved.

Genetic shifts in Helicoverpa armigera Hubner (Lepidoptera : Noctuidae) over a year in the Dawson/Callide Valleys

Microsatellites were used to analyse 68 collections of Helicoverpa armigera in the Dawson/Callide Valleys in central Queensland. The study aimed to evaluate the genetic structure in this region over a 12-month period (September 2000-August 2001). The results detected genetic shifts in H. armigera collections, with genetic changes occurring month by month. Collections in any month were genetically distant from the preceding month's collections. There was no observed difference between collections of H. armigera from the Biloela region and those found in the Theodore region of central Queensland. The data support the current area-wide management strategies for H. armigera by reinforcing the importance and contribution of local management practices. The study also indicates a need for the continuation of regional or Australia-wide approaches to management of the low levels of immigration that are occurring, and for future high pest pressure years.

Relationship between oviposition preference and offspring performance in Australian Helicoverpa armigera (Hubner) (Lepidoptera : Noctuidae)

We investigated the oviposition preference and larval performance of Helicoverpa armigera under laboratory conditions to determine if the oviposition preference of individual females on maize, cowpea and cotton correlates with offspring performance on the leaves of the same host plants. The host-plant preference hierarchy of females did not correlate with their offspring performance. Female moths chose host plants that contributed less to their offspring fitness. Plant effects accounted for the largest amount of variation in offspring performance, while the effects of female (family) was low. The offspring of most females (80%, n = 10) were broadly similar, but 20% (two out of 10), showed marked difference in their offspring performance across the host-plant species. Similarly, there was no relation between larval feeding preference and performance. However, like most laboratory experiments, our experi-mental design does not allow the evaluation of ecological factors (for example, natural enemies, host abundance, etc.) that can play an important role in larval performance in the field. Overall, the results highlight the importance of carrying out preference performance analysis on the individual or family level, rather than pooling individuals to obtain average population data.

A role for pectin in the control of cell expansion

Uptake of nutrients and water depends on the growth of roots through elongation of individual cells near the. root tip. Many of the numerous components of Type I primary cell walls, those of dicotyledons and monocotyledons other than grasses (Poaceae), have been determined, and many hypotheses have been proposed for the control of cell expansion. This important aspect of plant growth still needs elucidation, however. A model is proposed in which pectin, which occurs as a calcium (Ca) pectate gel between the load-bearing cellulose microfibrils and xyloglucan (XG) chains, controls the rate at which cells expand. It is considered that the increasing tension generated by the expanding cell is transmitted to interlocked XG chains and cellulose microfibrils. The resulting deformation of the embedded Ca pectate gel elicits the excretion of protons from the cytoplasm, possibly via compounds such as cell wall-associated kinases, that weakens the Ca pectate gel, permitting slippage of XG molecules through the action of expansin. Further slippage is prevented by deformation of the pectic gel, proton diffusion, and the transfer of residual tension to adjacent XG chains. Evidence for this model is based on the effects of pH, Ca, and aluminum (Al) on root elongation and on the reactions of these cations with Ca pectate. This model allows for genetic selection of plants and adaptation of individual plants to root environmental conditions.

Model studies on the role of citrate, malate and pectin esterification on the enzymatic degradation of Al- and Ca-pectate gels: possible implications for Al-tolerance

Aluminium (At) tolerance in plants may be conferred by reduced binding of Al in the cell wall through low root cation exchange capacity (CEC) or by organic acid exudation. Root CEC is related to the degree of esterification (DE) of pectin in the cell wall, and pectin hydrolysis plays a role in cell expansion. Therefore, it was hypothesised that Al-tolerant plants with a low root CEC maintain pectin hydrolysis in the presence of Al, allowing cell expansion to continue. Irrespective of the DE, binding of Al to pectin reduced the enzymatic hydrolysis of Al-pectin gels by polygalacturonase (E.C. 3.2.1.15). Pectin gels with calcium (Ca) were slightly hydrolysed by polygalacturonase. It was concluded, therefore, that Al tolerance conferred by low root CEC is not mediated by the ability to maintain pectin hydrolysis. Citrate and malate, but not acetate, effectively dissolved Al-pectate gel and led to hydrolysis of the dissolved pectin by polygalacturonase. The organic acids did not dissolve Ca-pectate, nor did they increase pectin hydrolysis by polygalacturonase. It was concluded that exudation of some organic acids can remove Al bound to pectin and this could alleviate toxicity, constituting a tolerance mechanism. (C) 2003 Editions scientitiques et medicales Elsevier SAS. All rights reserved.

Simulation supplements field studies to determine no-till dryland corn population recommendations for semiarid western Nebraska

In a 2-yr multiple-site field study conducted in western Nebraska during 1999 and 2000, optimum dryland corn (Zea mays L.) population varied from less than 1.7 to more than 5.6 plants m(-2), depending largely on available water resources. The objective of this study was to use a modeling approach to investigate corn population recommendations for a wide range of seasonal variation. A corn growth simulation model (APSIM-maize) was coupled to long-term sequences of historical climatic data from western Nebraska to provide probabilistic estimates of dryland yield for a range of corn populations. Simulated populations ranged from 2 to 5 plants m(-2). Simulations began with one of three levels of available soil water at planting, either 80, 160, or 240 mm in the surface 1.5 m of a loam soil. Gross margins were maximized at 3 plants m(-2) when starting available water was 160 or 240 mm, and the expected probability of a financial loss at this population was reduced from about 10% at 160 mm to 0% at 240 mm. When starting available water was 80 mm, average gross margins were less than $15 ha(-1), and risk of financial loss exceeded 40%. Median yields were greatest when starting available soil water was 240 mm. However, perhaps the greater benefit of additional soil water at planting was reduction in the risk of making a financial loss. Dryland corn growers in western Nebraska are advised to use a population of 3 plants m(-2) as a base recommendation.

Sensitivity of Helicoverpa armigera nucleopolyhedrovirus polyhedra to sodium dodecyl sulfate

Sodium dodecyl sulfate (SDS) is commonly used to extract polyhedra from infected cells and diseased dead larval tissues. It was found, however, that 80% of Helicoverpa armigera nucleopolyhedrovirus (HaSNPV) polyhedra produced via cell culture were damaged after 30 min of 0.5% SDS treatment whereas only 20% of in vivo produced polyhedra were damaged by the same treatment. Transmission and scanning electron microscopy revealed that the damaged polyhedra had lost their polyhedron envelopes and virions were dislodged from the polyhedrin matrix, leaving empty spaces that were previously occupied by the occluded virions. Up to 20% in vitro produced polyhedra were resistant to SDS and remained intact, even after a 24 h exposure to SDS. This sensitivity to SDS was observed across a range of cell culture media, including serum supplemented media. Electron microscopy also revealed that the inferior polyhedron envelope of in vitro produced polyhedra is likely due to poor interaction between the polyhedron envelope, polyhedron envelope protein (PEP), and polyhedrin matrix. The PEP gene was cloned and sequenced and mutations in this gene were ruled out as an explanation. In vitro produced polyhedra that were passed through insect larva once were resistant to SDS, indicating that a critical component is lacking in insect cell culture medium used for producing HaSNPV or the cells growing in culture are inefficient in some ways in relation to production of polyhedra. (C) 2002 Elsevier Science (USA). All rights reserved.

Effect of time of harvest of budded virus on the selection of baculovirus FP mutants in cell culture

Rapid formation and selection of FP (few polyhedra) mutants occurs during serial passaging of Helicoverpa armigera nucleopolyhedrovirus (HaSNPV) in insect cell culture. The production of HaSNPV for use as biopesticides requires the passaging of the virus over a number of passages to produce enough virus inoculum for large-scale fermentation. During serial passaging in cell culture, FP mutants were rapidly selected, resulting in declined productivity and reduced potency of virus. Budded virus (BV) is usually harvested between 72 and 96 h postinfection (hpi) in order to obtain a high titer virus stock. In this study, the effect of tine of harvest (TOH) for BV on the selection rate of HaSNPV FP mutants during serial passaging was investigated. BV were harvested at different times postinfection, and each series was serially passaged for six passages. The productivity and percentage of FP mutants at each passage were determined. It was found that the selection of FP mutants can he reduced by employing an earlier TOH for BV. Serial passaging with BV harvested at 48 hpi showed a slower accumulation of FP mutants compared to that of BV harvested after 48 hpi. Higher cell specific yields were also maintained when BV were harvested at 48 hpi. When BV that were formed between 48 and 96 hpi were harvested and serially passaged, FP mutants quickly dominated the virus population. This suggests that the V formed and released between 48 and 96 hpi are most likely from FP mutant infected cells.

Crescimento, teores e acúmulo de nutrientes em plantas de milho fertirrigadas com água residuária do beneficiamento de frutos de café

A cultura do cafeeiro sempre ocupou lugar de destaque na economia do país, dada sua importância na área econômica e social, buscando cada vez mais, um mercado diferenciado, com novas tecnologias para a melhoria da qualidade da bebida. A atividade de lavagem e despolpa de frutos do cafeeiro, necessária para a redução do custo de secagem e a melhoria da qualidade de bebida, é geradora de grandes volumes de resíduos sólidos e líquidos, ricos em material orgânico e inorgânico. A água residuária da atividade de beneficiamento do café (ARC) é gerada anualmente em grande volume no Espírito Santo, e aliado aos nutrientes existentes nesse efluente indica a sua viabilidade de reaproveitamento na fertirrigação de culturas agrícolas. O objetivo do presente trabalho foi avaliar o efeito de diferentes doses de água residuária de café no crescimento, na absorção e interação entre nutrientes e no estado nutricional do milho. Para tanto, foi conduzido um experimento em casa de vegetação utilizando-se o delineamento experimental inteiramente casualizado, onde foram aplicadas 7 doses de ARC, com 3 repetições, em unidades experimentais constituídas por vasos com 2 dm³ de solo. As doses foram equivalentes a 0,00, 15,17, 30,35, 45,52, 60,70, 75,87 e 91,05 litros de ARC por m² de solo. Realizou-se a semeadura de cinco sementes de milho híbrido BR 206 por vaso e cinco dias após a germinação das plantas foi feito o desbaste, mantendo-se três plantas por vaso. Aos trinta dias após a germinação determinou-se o diâmetro do caule (DC), área foliar (AF), matéria seca da parte aérea (MSPA), matéria seca do sistema radicular (MSR), relação parte aérea/raiz (MSPA/MSR), razão massa radicular (matéria seca raiz/matéria seca total) e razão área foliar (área foliar/matéria seca total). Na parte aérea das plantas foi determinado os teores dos macronutrientes (N, P, K, Ca, Mg e S). Os dados foram submetidos a análise de variância e as variáveis em função das doses de ARC submetidas a análise de regressão. Para as variáveis dependentes foi calculado o coeficiente de correlação linear de Pearson. A ARC serviu como fonte de nutrientes para as plantas de milho, aumentou o rendimento da maioria das variáveis de crescimento e os teores de N, K e S. Porém diminuiu o teor de Ca, Mg e P da parte aérea das plantas além de indicar que altas doses promovem desbalanceamento na relação entre nutrientes.

Efeitos dos ácidos húmicos provenientes de aterro sanitário em plantas

O processo de tratamento biológico dos lixiviados de aterros sanitários resulta na geração de grandes quantidades de lodo, caracterizados por conterem altas taxas de matéria orgânica. Por meio do fracionamento químico da matéria orgânica são obtidos os ácidos húmicos (AH), fração de comprovada eficiência sobre o crescimento vegetal, promovendo melhorias no desenvolvimento das plantas. Este trabalho teve como objetivo caracterizar quimicamente os AH extraídos do lodo de lixiviado de aterro sanitário e avaliar os efeitos da aplicação de diferentes doses dos AH por meio de análises biológicas em plantas, visando minimizar os potenciais riscos da utilização do lodo in natura. Por meio de caracterizações químicas, o ácido húmico apresentou elevados teores de carbono e nitrogênio, podendo constituir uma importante fonte de nutrientes para as plantas. Além disso, foram observadas alterações nas taxas de absorção, na bioconcentração e na translocação de alguns nutrientes. Com relação à análise das enzimas antioxidantes, foi possível observar aumento na atividade de algumas enzimas com a aplicação de diferentes doses de AH. Além disto, foram constatadas alterações citogenéticas por meio da análise de células meristemáticas e F1 de Allium cepa. Influências sobre o crescimento da planta também são reportadas, por meio de aumentos expressivos na área radicular e na altura de Zea mays. Em geral, os dados de crescimento revelaram um maior investimento da planta na parte aérea, provavelmente associado com a melhor eficiência do sistema radicular. Além disso, também foram reportadas alterações na espessura da epiderme. Neste contexto, apesar dos benefícios nutricionais e da comprovada atuação dos AH sobre o metabolismo vegetal, os seus efeitos biológicos sobre enzimas do estresse oxidativo e a sua capacidade citotóxica precisam ser melhor investigados. Devido à complexidade do resíduo, a utilização de análises químicas, genéticas, enzimáticas, fisiológicas e anatômicas foi uma importante ferramenta para a avaliação da possível aplicação dos ácidos húmicos em plantas.

Eficiência do modelo Ceres-Maize na simulação do desempenho de híbridos de milho

O modelo Ceres-Maize foi desenvolvido para simulação do desenvolvimento e desempenho da cultura do milho e tem sido utilizado como ferramenta de auxílio no planejamento das safras e tomadas de decisões pelos agricultores de diversos países. Com o objetivo de avaliar a eficiência do modelo Ceres-Maize na simulação do desempenho de híbridos de milho nas condições tropicais, foi conduzido um experimento utilizando cinco híbridos (AG7000, AG8060, DKB199, GNZ2004 e P30F90) avaliados em três épocas de semeadura (24/11/2006, 19/12/2006 e 13/01/2007) na Universidade Federal de Lavras, Lavras, MG. O delineamento foi o DBC com três repetições. Avaliaram-se datas de florescimento e maturidade fisiológica, número de grãos por metro quadrado, massa de grãos e produtividade de grãos, que foram comparados com os dados simulados pelo quadrado médio do erro (RSME), porcentagem de desvio (PD) e índice de concordância (d). Os resultados indicaram que o milho semeado em janeiro apresentou menores valores de número de grãos por metro quadrado, massa de grão e produtividade de grãos do que semeaduras em novembro e dezembro. O Ceres-Maize mostrou-se muito eficiente para simular as datas de florescimento e de maturidade fisiológica em razão dos valores de RSME terem sido inferiores a 10%, os de 'd' superiores a 0,80 e o maior valor de PD -11%. Para o número de grãos por metro quadrado, massa de grãos e produtividade de grãos, a simulação foi considerada boa com valores de RSME inferiores a 20%. Para essas variáveis foram observados maiores valores de PD, principalmente na última época de semeadura, evidenciando que condições ambientais não favoráveis ao bom desempenho da cultura afetam a eficiência da simulação. O modelo Ceres-Maize mostrou ser boa ferramenta de simulação das características agronômicas de híbridos de milho.