The influence of the relative phase between the driving voltages on electron heating in asymmetric dual frequency capacitive discharges

The influence of the relative phase between the driving voltages on electron heating in asymmetric phase-locked dual frequency capacitively coupled radio frequency plasmas operated at 2 and 14 MHz is investigated. The basis of the analysis is a nonlinear global model with the option to implement a relative phase between the two driving voltages. In recent publications it has been reported that nonlinear electron resonance heating can drastically enhance the power dissipation to electrons at moments of sheath collapse due to the self-excitation of nonlinear plasma series resonance (PSR) oscillations of the radio frequency current. This work shows that depending on the relative phase of the driving voltages, the total number and exact moments of sheath collapse can be influenced. In the case of two consecutive sheath collapses a substantial increase in dissipated power compared with the known increase due to a single PSR excitation event per period is observed. Phase resolved optical emission spectroscopy (PROES) provides access to the excitation dynamics in front of the driven electrode. Via PROES the propagation of beam-like energetic electrons immediately after the sheath collapse is observed. In this work we demonstrate that there is a close relation between moments of sheath collapse, and thus excitation of the PSR, and beam-like electron propagation. A comparison of simulation results to experiments in a single and dual frequency discharge shows good agreement. In particular the observed influence of the relative phase on the dynamics of a dual frequency discharge is described by means of the presented model. Additionally, the analysis demonstrates that the observed gain in dissipation is not accompanied by an increase in the electrode’s dc-bias voltage which directly addresses the issue of separate control of ion flux and ion energy in dual frequency capacitively coupled radio frequency plasmas.

Malignant pleural mesothelioma: current treatments and emerging drugs

Background: Malignant pleural mesothelioma (MPM) is an uncommon disease whose incidence is increasing worldwide over the past 30 years. Surgical resection and radiotherapy represent the standard treatment in patient with resectable MPM. Chemotherapy is also necessary to reduce incidence of distant metastases, but the optimal setting of treatment (neoadjuvant, adjuvant and intrapleural) is not clarified. For the patients with unresectable MPM, the combination cisplatin and pemetrexed or ralitrexed is the standard treatment as supported by a Phase III study. Better understanding of molecular pathways involved in MPM has enabled inclusion of new drugs targeted against pathways responsible for proliferation, cell survival and angiogenesis. Objective: This review discusses the current treatment option, the specific signal pathways activated in MPM and the novel agents under evaluation in clinical trials. Methods: We use for this article abstracts, papers, oral presentations from ASCO and the website http://www.clinical-trials.gov. Results/conclusion: This review summarizes the activity of chemotherapy and of new agents under evaluation in clinical trials. The better understanding of molecular pathways activated in MPM will hopefully provide new therapeutic options for these patients in the future.

Indirect comparisons of treatments based on systematic reviews of randomised controlled trials

Randomised controlled trials are the most effective way to differentiate between the effects of competing interventions. However, head-to-head studies are unlikely to have been conducted for all competing interventions.

Structural investigations and magnetic properties of sol-gel Ni0.5Zn0.5Fe2O4 thin films for microwave heating

Nanocrystalline Ni0.5Zn0.5Fe2O4 thin films have been synthesized with various grain sizes by a sol-gel method on polycrystalline silicon substrates. The morphology, magnetic, and microwave absorption properties of the films calcined in the 673-1073 K range were studied with x-ray diffraction, scanning electron microscopy, x-ray photoelectron spectroscopy, atomic force microscopy, vibrating sample magnetometry, and evanescent microwave microscopy. All films were uniform without microcracks. Increasing the calcination temperature from 873 to 1073 K and time from 1 to 3 h resulted in an increase of the grain size from 12 to 27 nm. The saturation and remnant magnetization increased with increasing the grain size, while the coercivity demonstrated a maximum near a critical grain size of 21 nm due to the transition from monodomain to multidomain behavior. The complex permittivity of the Ni-Zn ferrite films was measured in the frequency range of 2-15 GHz. The heating behavior was studied in a multimode microwave cavity at 2.4 GHz. The highest microwave heating rate in the temperature range of 315-355 K was observed in the film close to the critical grain size.

The Economic Costs of Health Service Treatments for Asbestos-Related Mesothelioma Deaths

This article explores the complex and neglected picture of occupational and environmental disease healthcare costs specifically relating to asbestos. Diagnosed mesothelioma cases in Scotland in one calendar year were used to investigate the subject in greater depth. Data from UK sources on asbestos disease types recorded in 2000 and their disease treatment costs were obtained. Acute care economic costs of these diseases are estimated. One hundred and twenty diagnosed, recorded, and treated cases of asbestos-related diseases occurred in 2000 in Scotland. Mesothelioma accounted for 100 cases and directly cost Scottish National Health Service hospitals an estimated 942,038 pounds. The estimated UK figure in 2000 was at least 16,014,646 pounds because official figures for diagnosed and recorded deaths from mesothelioma are running at over 1700 a year with rises predicted for 2010 of 2000 deaths. By 2003, 50,000 people in the UK had died from diagnosed and recorded mesothelioma since records began. Earlier disease treatment costs would have been significantly lower than those in 2000 but, at 2000 prices, cost to the UK was roughly 471,019,000 pounds in acute hospital expenditure. Figures for primary care costs, including caregiver costs, are incomplete or unknown. These disease costs are substantial and have some international generalizability. Treatment patterns and costs vary greatly. Many lung cancer cases due to asbestos exposure occur globally for each mesothelioma case. Hence figures provided in this article are certain to be gross underestimates of the total health service and personal economic costs of asbestos illness and treatment in Scotland.

Intelligent demand response electric water heating to integrate wind power in Ireland

Dwindling fossil fuel resources and pressures to reduce greenhouse gas (GHG) emissions will result in a more diverse range of generation portfolios for future electricity systems. Irrespective of the portfolio mix the overarching requirement for all electricity suppliers and system operators is that supply instantaneously meets demand and that robust operating standards are maintained to ensure a consistent supply of high quality electricity to end-users. Therefore all electricity market participants will ultimately need to use a variety of tools to balance the power system. Thus the role of demand side management (DSM) with energy storage will be paramount to integrate future diverse generation portfolios. Electric water heating (EWH) has been studied previously, particularly at the domestic level to provide load control, peak shave and to benefit end-users financially with lower bills, particularly in vertically integrated monopolies. In this paper, a continuous Direct Load Control (DLC) EWH algorithm is applied in a liberalized market environment using actual historical electricity system and market data to examine the potential energy savings, cost reductions and electricity system operational improvements.

Determination of higher heating value of petro-diesels using mid-infrared spectroscopy and chemometry

Higher heating value (HHV) is probably the most important property of the fuels. Bomb calorimeter and derived empirical formulae are often used for accurate determination of HHV of fuels. A useful empirical equation was derived to estimate HHV of petro-diesels from their C and H contents: HHV (in MJ/kg) = 0.3482(C) + 1.1887(H), r (2) = 0.9956. The derived correlation was validated against the most common formulae in the literature, Boie and Channiwala-Parikh correlations. Accordingly, accurate determination of C and H contents is essential for estimation of HHV and avoids using a bomb calorimeter. However, accurate estimation of C and H contents requires using expensive and laborious gas chromatographic techniques. In this work, chemometry offered a simple method for HHV determination of petro-diesels without using bomb calorimeter or even gas chromatography. PLS-1 calibration was used instead of gas chromatography to find C and H contents from the non-selective mid-infrared (MIR) spectra of petro-diesels, HHV was then estimated from the earlier empirical equation. The proposed method predicts HHV of petro-diesels with high accuracy and precision, with modest analysis costs. The present method may be extended to other fuels.

Hydrothermal synthesis of a continuous zeolite Beta layer by optimization of time, temperature and heating rate of the precursor mixture

Highly crystalline zeolite Beta coatings in a range of Si/Al ratios of 12-23 were synthesized on a surface-modified molybdenum substrate by hydrothermal synthesis. The average thickness of the coatings was ca. 2 mu m corresponding to a coverage of 2.5 gm(-2). The coatings were obtained from a viscous Na, K, and TEAOH containing aluminosilicate precursor mixture with silica sol as reactive silicon source. A mechanism for the in situ growth of zeolite Beta coatings is proposed. According to this mechanism, the deposition of an amorphous gel layer on the substrate surface in the initial stage of the synthesis is an important step for the crystallization of continuous zeolite Beta coatings. The heating rate of the precursor mixture and the synthesis temperature were optimized to control the level of supersaturation and to stimulate the initial formation of a gel layer. At a Si/Al ratio of 23, fast heating and a temperature of 150 degrees C are required to obtain high coverage, while at a Si/Al ratio of 15, hydrothermal synthesis has to be performed with a slow initial heating rate at 140 degrees C. (c) 2007 Elsevier Inc. All rights reserved.