Growth and characterisation of certain organic crystals

The thesis presents the results of the investigations on the crystallisation ‘behaviour, detect structure end electrical properties of certain organic crystals---phthslic snhydride end potsssiun scid phthalate Hollow crystals of phthalic snhydride were grown from vapour. the norpholog of these hollow crystals were studied in detail and s. mechanism for their growth has been proposed. A closed crystal—vapour system was used to study the basal plane growth of the whiskers and the sequential growth, observed, confirmed the mechanism suggested for hollow crystals. The dendritic crystals of phthslic enhydride were grown, both iron the melt and solution. The observed morphologies of these dendrites ere described. Bpherulites of phthalic anhydride have been grown by the artificial initiation of nucleation, from melt and solution. The variation of the substructure oi’ these spherulites with the growth tenperature wee investigated. The spherulitic filll having ribbon substructure were etched to reveal dislocations. A mechanism for the formation of the observed etch pattern has been suggested. the slip occurring in these ribbons were studied and the results are presented

Microwave exfoliated reduced graphene oxide epoxy nanocomposites for high performance applications

Graphene has captured the attention of scientific community due to recently emerging high performance applications. Hence, studying its reinforcing effects on epoxy resin is a significant step. In this study, microwave exfoliated reduced graphene oxide (MERGO) was prepared from natural graphite for subsequent fabrication of epoxy nanocomposites using triethylenetetramine (TETA) as a curing agent via insitu polymerization. Thermogravimetric analysis (TGA), X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), C13 NMR spectroscopy, X-ray photoelectron spectroscopy (XPS) and ultravioletevisible (UVevis) spectroscopy were employed to confirm the simultaneous reduction and exfoliation of graphene oxide. The reinforcing effect of MERGO on epoxy resin was explored by investigating its static mechanical properties and dynamic mechanical analysis (DMA) at MERGO loadings of 0 to 0.5 phr. The micro-structure of epoxy/MERGO nanocomposites was investigated using scanning electron microscope (SEM), transmission electron microscope (TEM) and XRD techniques. The present work reports an enhancement of 32%, 103% and 85% in tensile, impact and flexural strength respectively of epoxy by the addition of even 0.25 phr MERGO. At this loading elastic and flexural moduli also increased by 10% and 65%, respectively. Single-edge-notch three-point-Bending (SEN-TPB) fracture toughness (KIC) measurements were carried out where a 63% increase was observed by the introduction of 0.25 phr MERGO. The interfacial interactions brought about by graphene also benefited the dynamic mechanical properties to a large extent in the form of a significant enhancement in storage modulus and slightly improved glass transition temperature. Considerable improvements were also detected in dielectric properties. The epoxy nanocomposite also attained an ac conductivity of 10 5 S/m and a remarkable increase in dielectric constant. The simple and cost effective way of graphene synthesis for the fabrication of epoxy/MERGO nanocomposites may be extended to the preparation of other MERGO based polymer nanocomposites. This remarkable class of materials has thrown open enormous opportunities for developing conductive adhesives and in microelectronics

Theoretical Design and Synthesis of Donor-Acceptor Conjugated Polymers for Photovoltaic and NLO Applications

Polymers with conjugated π-electron backbone display unusual electronic properties such as low energy optical transition, low ionization potentials, and high electron affinities. The properties that make these materials attractive include a wide range of electrical conductivity, mechanical flexibility and thermal stability. Some of the potential applications of these conjugated polymers are in sensors, solar cells, field effect transistors, field emission and electrochromic displays, supercapacitors and energy storage. With recent advances in the stability of conjugated polymer materials, and improved control of properties, a growing number of applications are currently being explored. Some of the important applications of conducting polymers include: they are used in electrostatic materials, conducting adhesives, shielding against electromagnetic interference (EMI), artificial nerves, aircraft structures, diodes, and transistors.

Profile simulations of gas chopping etching processes : model development and comparison with experiments

The progress in microsystem technology or nano technology places extended requirements to the fabrication processes. The trend is moving towards structuring within the nanometer scale on the one hand, and towards fabrication of structures with high aspect ratio (ratio of vertical vs. lateral dimensions) and large depths in the 100 µm scale on the other hand. Current procedures for the microstructuring of silicon are wet chemical etching and dry or plasma etching. A modern plasma etching technique for the structuring of silicon is the so-called "gas chopping" etching technique (also called "time-multiplexed etching"). In this etching technique, passivation cycles, which prevent lateral underetching of sidewalls, and etching cycles, which etch preferably in the vertical direction because of the sidewall passivation, are constantly alternated during the complete etching process. To do this, a CHF3/CH4 plasma, which generates CF monomeres is employed during the passivation cycle, and a SF6/Ar, which generates fluorine radicals and ions plasma is employed during the etching cycle. Depending on the requirements on the etched profile, the durations of the individual passivation and etching cycles are in the range of a few seconds up to several minutes. The profiles achieved with this etching process crucially depend on the flow of reactants, i.e. CF monomeres during the passivation cycle, and ions and fluorine radicals during the etching cycle, to the bottom of the profile, especially for profiles with high aspect ratio. With regard to the predictability of the etching processes, knowledge of the fundamental effects taking place during a gas chopping etching process, and their impact onto the resulting profile is required. For this purpose in the context of this work, a model for the description of the profile evolution of such etching processes is proposed, which considers the reactions (etching or deposition) at the sample surface on a phenomenological basis. Furthermore, the reactant transport inside the etching trench is modelled, based on angular distribution functions and on absorption probabilities at the sidewalls and bottom of the trench. A comparison of the simulated profiles with corresponding experimental profiles reveals that the proposed model reproduces the experimental profiles, if the angular distribution functions and absorption probabilities employed in the model is in agreement with data found in the literature. Therefor the model developed in the context of this work is an adequate description of the effects taking place during a gas chopping plasma etching process.

Development of directly modulated high speed telecommunication lasers based on surface defined feedback gratings

High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector or distributed feedback lasers, etching is the most critical step. Etching defines the lateral dimmensions of the structure which determines the performance of optoelectronic devices. In this thesis studies and experiments were carried out about the exist- ing etching processes for InP and a novel dry etching process was de- veloped. The newly developed process was based on Cl2/CH4/H2/Ar chemistry and resulted in very smooth surfaces and vertical side walls. With this process the grating definition was significantly improved as compared to other technological developments in the respective field. A surface defined grating definition approach is used in this thesis work which does not require any re-growth steps and makes the whole fabrication process simpler and cost effective. Moreover, this grating fabrication process is fully compatible with nano-imprint lithography and can be used for high throughput low-cost manufacturing. With usual etching techniques reported before it is not possible to etch very deep because of aspect ratio dependent etching phenomenon where with increasing etch depth the etch rate slows down resulting in non-vertical side walls and footing effects. Although with our de- veloped process quite vertical side walls were achieved but footing was still a problem. To overcome the challenges related to grating defini- tion and deep etching, a completely new three step gas chopping dry etching process was developed. This was the very first time that a time multiplexed etching process for an InP based material system was demonstrated. The developed gas chopping process showed extra ordinary results including high mask selectivity of 15, moderate etch- ing rate, very vertical side walls and a record high aspect ratio of 41. Both the developed etching processes are completely compatible with nano imprint lithography and can be used for low-cost high-throughput fabrication. A large number of broad area laser, ridge waveguide laser, distributed feedback laser, distributed bragg reflector laser and coupled cavity in- jection grating lasers were fabricated using the developed one step etch- ing process. Very extensive characterization was done to optimize all the important design and fabrication parameters. The devices devel- oped have shown excellent performance with a very high side mode suppression ratio of more than 52 dB, an output power of 17 mW per facet, high efficiency of 0.15 W/A, stable operation over temperature and injected currents and a threshold current as low as 30 mA for almost 1 mm long device. A record high modulation bandwidth of 15 GHz with electron-photon resonance and open eye diagrams for 10 Gbps data transmission were also shown.

1.55 µm High-Speed QDs Lasers for Optical Telecommunication Applications

In this work investigation of the QDs formation and the fabrication of QD based semiconductor lasers for telecom applications are presented. InAs QDs grown on AlGaInAs lattice matched to InP substrates are used to fabricate lasers operating at 1.55 µm, which is the central wavelength for far distance data transmission. This wavelength is used due to its minimum attenuation in standard glass fibers. The incorporation of QDs in this material system is more complicated in comparison to InAs QDs in the GaAs system. Due to smaller lattice mismatch the formation of circular QDs, elongated QDs and quantum wires is possible. The influence of the different growth conditions, such as the growth temperature, beam equivalent pressure, amount of deposited material on the formation of the QDs is investigated. It was already demonstrated that the formation process of QDs can be changed by the arsenic species. The formation of more round shaped QDs was observed during the growth of QDs with As2, while for As4 dash-like QDs. In this work only As2 was used for the QD growth. Different growth parameters were investigated to optimize the optical properties, like photoluminescence linewidth, and to implement those QD ensembles into laser structures as active medium. By the implementation of those QDs into laser structures a full width at half maximum (FWHM) of 30 meV was achieved. Another part of the research includes the investigation of the influence of the layer design of lasers on its lasing properties. QD lasers were demonstrated with a modal gain of more than 10 cm-1 per QD layer. Another achievement is the large signal modulation with a maximum data rate of 15 Gbit/s. The implementation of optimized QDs in the laser structure allows to increase the modal gain up to 12 cm-1 per QD layer. A reduction of the waveguide layer thickness leads to a shorter transport time of the carriers into the active region and as a result a data rate up to 22 Gbit/s was achieved, which is so far the highest digital modulation rate obtained with any 1.55 µm QD laser. The implementation of etch stop layers into the laser structure provide the possibility to fabricate feedback gratings with well defined geometries for the realization of DFB lasers. These DFB lasers were fabricated by using a combination of dry and wet etching. Single mode operation at 1.55 µm with a high side mode suppression ratio of 50 dB was achieved.

Análisis de los componentes de la cadena de suministro y global manufacturing y su relación con el desempeño organizacional en el sector manufacturero

El presente trabajo tiene como objetivo mostrar la relación que existe entre la cadena de suministro, global manufacturing y su relación con el desempeño organizacional en el sector manufacturero. El proyecto va a estar divido en tres grandes partes, en primer lugar estará el marco conceptual donde se especificarán los conceptos más significativos que abarcan la investigación, seguido del marco teórico donde se expondrán las teorías y estudios encontrados, analizados y estudiados con el fin de desembocar en la tercer parte que serán las conclusiones y recomendaciones que se darán a partir de los análisis y teorías que compactan el tema de la relación existente entre la cadena de suministro, global manufacturing y el desempeño organizacional.

Revaloració de la fracció cel·lular de la sang de porc procedent d'escorxadors industrials

La sang de porc és un subproducte comestible que es genera als escorxadors industrials durant el procés d'obtenció de la canal. Aquest subproducte es caracteritza per presentar una elevada càrrega contaminant i, degut a l'elevat volum que es genera, és necessari trobar estratègies que permetin la seva revaloració i aprofitament, a la vegada que disminuïm la contaminació ambiental i les despeses que es deriven del seu processament abans de l'abocament. La fracció cel·lular (FC) constitueix el 40 % de la sang de porc i conté principalment l'hemoglobina (Hb), que representa al voltant del 90 % del contingut en proteïna d'aquesta fracció (un 35 % aproximadament). L'elevat percentatge en proteïna i en ferro, i les seves bones propietats funcionals fan que l'aprofitament d'aquest subproducte com a primera matèria o ingredient de la indústria alimentària sigui una alternativa molt útil a l'hora de reduir les despeses de la indústria càrnia, sempre que es resolguin els problemes de l'enfosquiment i dels sabors estranys que pot conferir la FC quan s'addiciona a productes alimentaris. Una altra possible utilització de la FC és aprofitar les propietats colorants de l'Hb o del grup hemo, com a colorant d'origen natural en diversos productes alimentaris. Els objectius del present treball eren, en primer lloc, determinar les millors condicions d'aplicació del procés de conservació de la FC mitjançant la deshidratació per atomització i caracteritzar físico-químicament i microbiològica el concentrat d'Hb en pols. En segon lloc, avaluar l'eficàcia de diferents additius antioxidants i/o segrestants del ferro per prevenir l'enfosquiment que pateix la FC durant la deshidratació. En tercer lloc, aplicar tractaments d'altes pressions hidrostàtiques com a procés d'higienització i avaluar els efectes d'aquest tractament sobre la microbiota contaminant, el color i les propietats funcionals de la FC. Finalment, desenvolupar un procés d'obtenció d'hidrolitzats proteics descolorats a partir de l'Hb amb la finalitat d'utilitzar-los com a ingredients nutricionals i/o funcionals. La millor temperatura de deshidratació per atomització de la FC hemolitzada era 140ºC. La FC en pols presentava un contingut en humitat del 5,3 % i un percentatge de solubilitat proteica del 96 %. La deshidratació per atomització induïa canvis en l'estructura nativa de l'Hb i, per tant, un cert grau de desnaturalització que pot conduir a una disminució de les seves propietats funcionals. L'extracte sec de la FC en pols estava composat per un 94,6 % de proteïna, un 3 % de sals minerals i un 0,7 % de greix. Els valors CIE L*a*b* del color de la FC en pols eren força constants i reflectien el color vermell marró fosc d'aquesta, a causa de l'oxidació del ferro hèmic que es produeix durant la deshidratació. La càrrega contaminant de la FC fresca de la sang de porc era força elevada i el tractament d'hemòlisi amb ultrasons i la centrifugació posterior no produïen una reducció significativa de la microbiota contaminant, obtenint un producte amb uns recomptes microbiològics de l'ordre de 106 ufc·mL-1. La deshidratació per atomització produïa una disminució d'una unitat logarítmica dels recomptes totals de la FC hemolitzada. Tanmateix, el producte en pols encara reflectia l'elevada contaminació de la primera matèria, fet que condiciona negativament la seva utilització com a ingredient alimentari, a no ser que es millorin les condicions de recollida de la sang a l'escorxador o que aquesta o la FC es sotmeti a algun tractament d'higienització prèviament a la deshidratació. Les isotermes de sorció a 20ºC de la FC en pols tenien forma sigmoïdal i una histèresi estreta i llarga. L'equació GAB és un bon model matemàtic per ajustar les dades de sorció obtingudes experimentalment i determinar la isoterma d'adsorció de la FC deshidratada per atomització. El percentatge d'humitat de la FC deshidratada a 140ºC es corresponia a un valor d'aw a 20 ºC d'aproximadament el 0,16. Tenint en compte que estava per sota dels valors d'aw corresponents a la capa monomolecular, es pot garantir la conservació a temperatura ambient del producte, sempre que s'envasi en recipients tancats que no permetin l'entrada d'humitat de l'exterior. De l'estudi de la possible estabilització del color de la FC deshidratada per atomització mitjançant l'addició d'antioxidants i/o segrestants de ferro, es va observar que només l'àcid ascòrbic, la glucosa, l'àcid nicotínic i la nicotinamida, tenien efectes positius sobre el color del producte en pols. L'ascòrbic i la glucosa no milloraven la conservació del color de l'Hb però disminuïen l'enfosquiment que es produeix durant la deshidratació, amb la qual cosa es pot obtenir un producte en pols de color marró més clar. L'addició de dextrina o L-cisteïna no disminuïa l'enfosquiment ni evitava el canvi de color de l'Hb. L'àcid nicotínic i la nicotinamida protegien el color de l'Hb durant el procés de deshidratació i l'emmagatzematge de la FC en pols. Les millors condicions d'aplicació del tractament amb altes pressions hidrostàtiques (HHP) sobre la FC eren 400 MPa, a 20ºC, durant 15 minuts, perquè produïen una millora significativa de la qualitat microbiològica, no afectaven negativament al color, no comprometien gaire la solubilitat proteica l'Hb i, malgrat que produïen un augment de la viscositat, la FC romania fluida després del tractament. Aquest tractament permetia una reducció de la microbiota contaminant de la FC d'entre 2 i 3 unitats logarítmiques. L'aplicació de l'alta pressió i la posterior deshidratació per atomització permetien obtenir un producte en pols amb recomptes totals de l'ordre de 2,8 unitats logarítmiques. El color de la FC pressuritzada en pols era igual que el de la FC control deshidratada, perquè ambdues mostres presentaven la mateixa susceptibilitat a l'oxidació del grup hemo produïda per la deshidratació. L'alta pressió incrementava la susceptibilitat de l'Hb als efectes desnaturalitzants de la deshidratació, fonamentalment a pH 7 (PIE), ja que es va observar una disminució de la solubilitat proteica a pH neutre després dels 2 processos tecnològics. La FC en pols presentava una màxima capacitat escumant al PIE de l'Hb. L'aplicació del tractament HHP produïa una disminució de la capacitat escumant de la FC en pols, però no tenia efectes negatius sobre l'estabilitat de l'escuma formada. Tampoc es van observar efectes negatius del tractament HHP sobre l'activitat emulsionant de l'Hb. La màxima activitat emulsionant de l'Hb s'aconseguia amb una concentració de FC en pols de l'1,5 % a pH 7 i de l'1 % a pH 4,5. Les pastes obtingudes per escalfament de la FC presentaven característiques molt diferenciades depenent del pH. A pH neutre es formaven unes pastes dures i consistents, mentre que a pH àcid les pastes eren poc consistents, molt adhesives i més elàstiques que les anteriors. Aquestes tenien una capacitat de retenció d'aigua molt superior que les de pH 7, en les quals l'aigua quedava retinguda per capil·laritat. La textura i capacitat de retenció d'aigua de les pastes tampoc eren afectades pel tractament HHP. El tractament HHP incrementava l'activitat de la Tripsina sobre l'Hb quan el substrat i l'enzim es tractaven conjuntament i afavoria el procés d'obtenció d'hidrolitzats descolorats a partir de la FC, la qual cosa permetia assolir el mateix grau de descoloració amb una dosi d'enzim inferior. El tractament d'hidròlisi de la FC amb la utilització combinada de Tripsina seguida d'un tractament amb Pepsina permetia l'obtenció d'un hidrolitzat proteic d'Hb descolorat i hidrolitzava completament la globina, donant lloc a 2 pèptids de 10,8 i 7,4 KDa. Val a dir que també produïa un 60 80 % de nitrogen soluble en TCA, constituït fonamentalment per pèptids petits i aminoàcids lliures. Els hidrolitzats trípsics i pèpsics d'Hb, obtinguts a partir de FC no pressuritzada i deshidratats per atomització a 180ºC, eren de color blanc i tenien un contingut en humitat del 4,7 %, un 84,2 % de proteïna i 9,7 % de sals minerals. El procés d'hidròlisi permetia una reducció considerable de la contaminació de la FC, obtenint un producte en pols amb uns recomptes totals de l'ordre de 102-103 ufc·g-1. Pel que fa a la funcionalitat dels hidrolitzats d'Hb deshidratats per atomització, aquests presentaven una elevada solubilitat proteica a pH 5 i 7 i romanien solubles després d'un escalfament a 80ºC durant 30 min. Tanmateix, aquesta hidròlisi afectava molt negativament la capacitat de mantenir escumes estables i l'activitat emulsionant.

The influence of Fe-rich coatings on the dissolution of anorthite at pH 2.6

Surface coatings are very common on mineral grains in soils but most laboratory dissolution experiments are carried out on pristine, uncoated mineral grains. An experiment designed to unambiguously isolate the effect of surface coatings on mineral dissolution from any influence of solution saturation state is reported. Two aliquots of 53 to 63 mum anorthite feldspar powder were used. One was dissolved in pH 2.6 HCl, the other in pH 2.6 FeCl3 solution, both for similar to6000 h in flow-through reactors. An amorphous Fe-rich, Al-, Ca- and Si-free orange precipitate coated the anorthite dissolved in the FeCl3 solution. BET surface area of the anorthite increased from 0.16 to 1.65 m(2) g(-1) in the HCl experiment and to 3.89 m(2) g(-1) in the FeCl3 experiment. The increase in surface area in the HCl experiment was due to the formation of etch pits on the anorthite grain surface whilst the additional increase in the FeCl3 experiment was due to the micro- and meso-porous nature of the orange precipitate. This precipitate did not inhibit or slow the dissolution of the anorthite. Steady state dissolution rates for the anorthite dissolved in the HCl and FeCl3 were similar to2.5 and 3.2 X 10(-10) mol(feldspar) m(-2) s(-1) respectively. These rates are not significantly different after the cumulative uncertainty of 17% in their value due to uncertainty in the inputs parameters used in their calculation is taken into account. Results from this experiment support previous theoretical and inference-based conclusions that porous coatings should not inhibit mineral dissolution. Copyright (C) 2003 Elsevier Ltd.

Does reactive surface area depend on grain size? Results from pH 3, 25 circle C far-from-equilibrium flow-through dissolution experiments on anorthite and biotite

Laboratory determined mineral weathering rates need to be normalised to allow their extrapolation to natural systems. The principle normalisation terms used in the literature are mass, and geometric- and BET specific surface area (SSA). The purpose of this study was to determine how dissolution rates normalised to these terms vary with grain size. Different size fractions of anorthite and biotite ranging from 180-150 to 20-10 mu m were dissolved in pH 3, HCl at 25 degrees C in flow through reactors under far from equilibrium conditions. Steady state dissolution rates after 5376 h (anorthite) and 4992 h (biotite) were calculated from Si concentrations and were normalised to initial- and final- mass and geometric-, geometric edge- (biotite), and BET SSA. For anorthite, rates normalised to initial- and final-BET SSA ranged from 0.33 to 2.77 X 10(-10) mol(feldspar) m(-2) s(-1), rates normalised to initial- and final-geometric SSA ranged from 5.74 to 8.88 X 10(-10) mol(feldspar) m(-2) s(-1) and rates normalised to initial- and final-mass ranged from 0.11 to 1.65 mol(feldspar) g(-1) s(-1). For biotite, rates normalised to initial- and final-BET SSA ranged from 1.02 to 2.03 X 10(-12) mol(biotite) m(-2) s(-1), rates normalised to initial- and final-geometric SSA ranged from 3.26 to 16.21 X 10(-12) mol(biotite) m(-2) s(-1), rates normalised to initial- and final-geometric edge SSA ranged from 59.46 to 111.32 x 10(-12) mol(biotite) m(-2) s(-1) and rates normalised to initial- and final-mass ranged from 0.81 to 6.93 X 10(-12) mol(biotite) g(-1) s(-1). For all normalising terms rates varied significantly (p <= 0.05) with grain size. The normalising terms which gave least variation in dissolution rate between grain sizes for anorthite were initial BET SSA and initial- and final-geometric SSA. This is consistent with: (1) dissolution being dominated by the slower dissolving but area dominant non-etched surfaces of the grains and, (2) the walls of etch pits and other dissolution features being relatively unreactive. These steady state normalised dissolution rates are likely to be constant with time. Normalisation to final BET SSA did not give constant ratios across grain size due to a non-uniform distribution of dissolution features. After dissolution coarser grains had a greater density of dissolution features with BET-measurable but unreactive wall surface area than the finer grains. The normalising term which gave the least variation in dissolution rates between grain sizes for biotite was initial BET SSA. Initial- and final-geometric edge SSA and final BET SSA gave the next least varied rates. The basal surfaces dissolved sufficiently rapidly to influence bulk dissolution rate and prevent geometric edge SSA normalised dissolution rates showing the least variation. Simple modelling indicated that biotite grain edges dissolved 71-132 times faster than basal surfaces. In this experiment, initial BET SSA best integrated the different areas and reactivities of the edge and basal surfaces of biotite. Steady state dissolution rates are likely to vary with time as dissolution alters the ratio of edge to basal surface area. Therefore they would be more properly termed pseudo-steady state rates, only appearing constant because the time period over which they were measured (1512 h) was less than the time period over wich they would change significantly. (c) 2006 Elsevier Inc. All rights reserved.

Characterization of mineral surfaces using FIB and TEM: a case study of naturally weathered alkali feldspars

Using a focused ion beam (FIB) instrument, electron-transparent samples (termed foils) have been cut from the naturally weathered surfaces of perthitic alkali feldspars recovered from soils overlying the Shap granite, northwest England. Characterization of these foils by transmission electron microscopy (TEM) has enabled determination of the crystallinity and chemical composition of near-surface regions of the feldspar and an assessment of the influence of intragranular microtextures on the microtopography of grain surfaces and development of etch pits. Damage accompanying implantation of the 30 kV Ga+ ions used for imaging and deposition of protective platinum prior to ion milling creates amorphous layers beneath outer grain surfaces, but can be overcome by coating grains with > 85 nm of gold before FIB work. The sidewalls of the foil and feldspar surrounding original voids are also partially amorphized during later stages of ion milling. No evidence was found for the presence of amorphous or crystalline weathering products or amorphous "leached layers" immediately beneath outer grain surfaces. The absence of a leached layer indicates that chemical weathering of feldspar in the Shap soils is stoichiometric, or if non-stoichiometric, either the layer is too thin to resolve by the TEM techniques used (i.e., <=similar to 2.5 nm) or an insufficient proportion of ions have been leached from near-surface regions so that feldspar crystallinity is maintained. No evidence was found for any difference in the mechanisms of weathering where a microbial filament rests on the feldspar surface. Sub-micrometer-sized steps on the grain surface have formed where subgrains and exsolution lamellae have influenced the propagation of fractures during physical weathering, whereas finer scale corrugations form due to compositional or strain-related differences in dissolution rates of albite platelets and enclosing tweed orthoclase. With progressive weathering, etch pits that initiated at the grain surface extend into grain interiors as etch tubes by exploiting preexisting networks of nanopores that formed during the igneous history of the grain. The combination of FIB and TEM techniques is an especially powerful way of exploring mechanisms of weathering within the "internal zone" beneath outer grain surfaces, but results must be interpreted with caution owing to the ease with which artifacts can be created by the high-energy ion and electron beams used in the preparation and characterization of the foils.

Thermally responsive elastomeric supramolecular polymers featuring flexible aliphatic hydrogen-bonding end-groups

The present paper details the synthesis, characterization, and preliminary physical analyses of a series of polyisobutylene derivatives featuring urethane and urea end-groups that enable supramolecular network formation to occur via hydrogen bonding. These polymers are readily accessible from relatively inexpensive and commercially available starting materials using a simple two-step synthetic approach. In the bulk, these supramolecular networks were found to possess thermoreversible and elastomeric characteristics as determined by temperature-dependent rheological analysis. These thermoreversible and elastomeric properties make these supramolecular materials potentially very useful in applications such as adhesives and healable surface coatings.

Double-gyroid morphology of a polystyrene-block-poly(ferrocenylethylmethylsilane) diblock copolymer: a route to ordered bicontinuous nanoscale architectures

A polystyrene-block-poly(ferrocenylethylmethylsilane) diblock copolymer, displaying a double-gyroid morphology when self-assembled in the solid state, has been prepared with a PFEMS volume fraction phi(PFMS)=0.39 and a total molecular weight of 64 000 Da by sequential living anionic polymerisation. A block copolymer with a metal-containing block with iron and silicon in the main chain was selected due to its plasma etch resistance compared to the organic block. Self-assembly of the diblock copolymer in the bulk showed a stable, double-gyroid morphology as characterised by TEM. SAXS confirmed that the structure belonged to the Ia3d space group.

Child anxiety and parenting in England and Italy: the moderating role of maternal warmth

BACKGROUND: Parenting factors have been implicated in the aetiology and maintenance of child anxiety. Most research has been correlational with little experimental or longitudinal work. Cross-cultural comparison could be illuminating. A comparison of Italian and British children and their mothers was conducted. METHODS: A sample of 8- to 10-year old children, 60 Italian and 49 English, completed the Spence Child Anxiety Scale. Mothers also completed two questionnaires of parenting: the Skills of Daily Living Checklist (assessing maternal autonomy granting) and the Parent-Child Interaction Questionnaire (assessing maternal intrusiveness). Parenting was assessed in two video-recorded blindly rated mother-child interaction tasks, the 'belt-buckling tasks and the 'etch-a-sketch', providing objective indices of overcontrol, warmth, lack of autonomy granting, and overprotection. RESULTS: There were no differences between the children in overall anxiety and specific forms of anxiety. Parenting, however, was markedly different for the two countries. Compared to English mothers, on the two questionnaires, Italian mothers were significantly less autonomy granting and more intrusive; and in terms of the observed indices, a significantly greater proportion of the Italian mothers displayed a high level of both overprotection and overcontrol, and a low level of autonomy granting. Notably, Italian mothers evidenced significantly more warmth than English mothers; and maternal warmth was found to moderate the impact of self-reported maternal intrusiveness on the level of both overall child anxiety and the level of child separation anxiety; and it also moderated the relationship between both observed maternal intrusiveness and overall child anxiety and observed maternal overprotectiveness and child separation anxiety. CONCLUSIONS: Although, compared to the British mothers, the Italian mothers were more likely to evidence high levels of parenting behaviours previously found to be anxiogenic, the high levels of warmth displayed by these mothers to their children appears to have neutralised the adverse impact of these behaviours.