An adaptive neighborhood search algorithm for optimizing stochastic mining complexes

Les métaheuristiques sont très utilisées dans le domaine de l'optimisation discrète. Elles permettent d’obtenir une solution de bonne qualité en un temps raisonnable, pour des problèmes qui sont de grande taille, complexes, et difficiles à résoudre. Souvent, les métaheuristiques ont beaucoup de paramètres que l’utilisateur doit ajuster manuellement pour un problème donné. L'objectif d'une métaheuristique adaptative est de permettre l'ajustement automatique de certains paramètres par la méthode, en se basant sur l’instance à résoudre. La métaheuristique adaptative, en utilisant les connaissances préalables dans la compréhension du problème, des notions de l'apprentissage machine et des domaines associés, crée une méthode plus générale et automatique pour résoudre des problèmes. L’optimisation globale des complexes miniers vise à établir les mouvements des matériaux dans les mines et les flux de traitement afin de maximiser la valeur économique du système. Souvent, en raison du grand nombre de variables entières dans le modèle, de la présence de contraintes complexes et de contraintes non-linéaires, il devient prohibitif de résoudre ces modèles en utilisant les optimiseurs disponibles dans l’industrie. Par conséquent, les métaheuristiques sont souvent utilisées pour l’optimisation de complexes miniers. Ce mémoire améliore un procédé de recuit simulé développé par Goodfellow & Dimitrakopoulos (2016) pour l’optimisation stochastique des complexes miniers stochastiques. La méthode développée par les auteurs nécessite beaucoup de paramètres pour fonctionner. Un de ceux-ci est de savoir comment la méthode de recuit simulé cherche dans le voisinage local de solutions. Ce mémoire implémente une méthode adaptative de recherche dans le voisinage pour améliorer la qualité d'une solution. Les résultats numériques montrent une augmentation jusqu'à 10% de la valeur de la fonction économique.

An adaptive neighborhood search algorithm for optimizing stochastic mining complexes

Les métaheuristiques sont très utilisées dans le domaine de l'optimisation discrète. Elles permettent d’obtenir une solution de bonne qualité en un temps raisonnable, pour des problèmes qui sont de grande taille, complexes, et difficiles à résoudre. Souvent, les métaheuristiques ont beaucoup de paramètres que l’utilisateur doit ajuster manuellement pour un problème donné. L'objectif d'une métaheuristique adaptative est de permettre l'ajustement automatique de certains paramètres par la méthode, en se basant sur l’instance à résoudre. La métaheuristique adaptative, en utilisant les connaissances préalables dans la compréhension du problème, des notions de l'apprentissage machine et des domaines associés, crée une méthode plus générale et automatique pour résoudre des problèmes. L’optimisation globale des complexes miniers vise à établir les mouvements des matériaux dans les mines et les flux de traitement afin de maximiser la valeur économique du système. Souvent, en raison du grand nombre de variables entières dans le modèle, de la présence de contraintes complexes et de contraintes non-linéaires, il devient prohibitif de résoudre ces modèles en utilisant les optimiseurs disponibles dans l’industrie. Par conséquent, les métaheuristiques sont souvent utilisées pour l’optimisation de complexes miniers. Ce mémoire améliore un procédé de recuit simulé développé par Goodfellow & Dimitrakopoulos (2016) pour l’optimisation stochastique des complexes miniers stochastiques. La méthode développée par les auteurs nécessite beaucoup de paramètres pour fonctionner. Un de ceux-ci est de savoir comment la méthode de recuit simulé cherche dans le voisinage local de solutions. Ce mémoire implémente une méthode adaptative de recherche dans le voisinage pour améliorer la qualité d'une solution. Les résultats numériques montrent une augmentation jusqu'à 10% de la valeur de la fonction économique.

Modeling and optimization techniques for advanced vehicular networking

This thesis deals with optimization techniques and modeling of vehicular networks. Thanks to the models realized with the integer linear programming (ILP) and the heuristic ones, it was possible to study the performances in 5G networks for the vehicular. Thanks to Software-defined networking (SDN) and Network functions virtualization (NFV) paradigms it was possible to study the performances of different classes of service, such as the Ultra Reliable Low Latency Communications (URLLC) class and enhanced Mobile BroadBand (eMBB) class, and how the functional split can have positive effects on network resource management. Two different protection techniques have been studied: Shared Path Protection (SPP) and Dedicated Path Protection (DPP). Thanks to these different protections, it is possible to achieve different network reliability requirements, according to the needs of the end user. Finally, thanks to a simulator developed in Python, it was possible to study the dynamic allocation of resources in a 5G metro network. Through different provisioning algorithms and different dynamic resource management techniques, useful results have been obtained for understanding the needs in the vehicular networks that will exploit 5G. Finally, two models are shown for reconfiguring backup resources when using shared resource protection.

Progetto LetsBox!: definizione del ciclo di vita del prodotto, design, sviluppo e validazione dell’UX

Questo volume di tesi ha l'obiettivo di descrivere l'intero processo di progettazione, sviluppo e rilascio di un'applicazione mobile, coinvolgendo anche gli end-user nella fase finale di valutazione. In particolare, il volume di tesi si sviluppa su quattro capitoli che descrivono 1) l'analisi dei requisiti, seguendo un approccio AGILE, 2) l'analisi del ciclo di vita del prodotto (inclusi business model e business plan), 3) l'architettura del sistema, e, infine, 4) la valutazione dell’usabilità e della UX. L'applicazione usata come caso di studio è "LetsBox!", un'applicazione mobile della categoria puzzle game, sviluppata sfruttando il framework di sviluppo di app ibride IONIC 5, con l’obiettivo di creare un gioco che coinvolgesse il giocatore tanto da farlo giocare nei suoi momenti di svago e indurlo a sfidare i record esistenti ma, nello stesso tempo creare un gioco originale e non esistente sul mercato.

Making Fedora easier to implement with Fez: A free open source content model and workflow management front-end to Fedora

The University of Queensland, Australia has developed Fez, a world-leading user-interface and management system for Fedora-based institutional repositories, which bridges the gap between a repository and users. Christiaan Kortekaas, Andrew Bennett and Keith Webster will review this open source software that gives institutions the power to create a comprehensive repository solution without the hassle..

Real-time 3D interactive segmentation of echocardiographic data through user-based deformation of B-spline explicit active surfaces

Image segmentation is an ubiquitous task in medical image analysis, which is required to estimate morphological or functional properties of given anatomical targets. While automatic processing is highly desirable, image segmentation remains to date a supervised process in daily clinical practice. Indeed, challenging data often requires user interaction to capture the required level of anatomical detail. To optimize the analysis of 3D images, the user should be able to efficiently interact with the result of any segmentation algorithm to correct any possible disagreement. Building on a previously developed real-time 3D segmentation algorithm, we propose in the present work an extension towards an interactive application where user information can be used online to steer the segmentation result. This enables a synergistic collaboration between the operator and the underlying segmentation algorithm, thus contributing to higher segmentation accuracy, while keeping total analysis time competitive. To this end, we formalize the user interaction paradigm using a geometrical approach, where the user input is mapped to a non-cartesian space while this information is used to drive the boundary towards the position provided by the user. Additionally, we propose a shape regularization term which improves the interaction with the segmented surface, thereby making the interactive segmentation process less cumbersome. The resulting algorithm offers competitive performance both in terms of segmentation accuracy, as well as in terms of total analysis time. This contributes to a more efficient use of the existing segmentation tools in daily clinical practice. Furthermore, it compares favorably to state-of-the-art interactive segmentation software based on a 3D livewire-based algorithm.

Designing a user interface for repositories of learning objects

This paper presents the design of a user interface for repositories of learning objects. It integrates several tasks, such as submission, browse, search, and comment/review of learning objects, on a single screen layout. This design is being implemented on the web front-end of crimsonHex, a repository of specialized learning objects, developed as part of the EduJudge, a European project that aims to bring automatic evaluation of programming problems to eLearning systems.

Introducing numerical analysis tools in engineering: a Scilab user case in electronics course

Software tools in education became popular since the widespread of personal computers. Engineering courses lead the way in this development and these tools became almost a standard. Engineering graduates are familiar with numerical analysis tools but also with simulators (e.g. electronic circuits), computer assisted design tools and others, depending on the degree. One of the main problems with these tools is when and how to start use them so that they can be beneficial to students and not mere substitutes for potentially difficult calculations or design. In this paper a software tool to be used by first year students in electronics/electricity courses is presented. The growing acknowledgement and acceptance of open source software lead to the choice of an open source software tool – Scilab, which is a numerical analysis tool – to develop a toolbox. The toolbox was developed to be used as standalone or integrated in an e-learning platform. The e-learning platform used was Moodle. The first approach was to assess the mathematical skills necessary to solve all the problems related to electronics and electricity courses. Analysing the existing circuit simulators software tools, it is clear that even though they are very helpful by showing the end result they are not so effective in the process of the students studying and self learning since they show results but not intermediate steps which are crucial in problems that involve derivatives or integrals. Also, they are not very effective in obtaining graphical results that could be used to elaborate reports and for an overall better comprehension of the results. The developed tool was based on the numerical analysis software Scilab and is a toolbox that gives their users the opportunity to obtain the end results of a circuit analysis but also the expressions obtained when derivative and integrals calculations, plot signals, obtain vector diagrams, etc. The toolbox runs entirely in the Moodle web platform and provides the same results as the standalone application. The students can use the toolbox through the web platform (in computers where they don't have installation privileges) or in their personal computers by installing both the Scilab software and the toolbox. This approach was designed for first year students from all engineering degrees that have electronics/electricity courses in their curricula.

The influence of off-screen landmarks on user orientation

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

A DSL for querying building data streams of energy, eeather and occupation data

The superfluous consumption of energy is faced by the modern society as a Socio-Economical and Environmental problem of the present days. This situation is worsening given that it is becoming clear that the tendency is to increase energy price every year. It is also noticeable that people, not necessarily proficient in technology, are not able to know where savings can be achieved, due to the absence of accessible awareness mechanisms. One of the home user concerns is to balance the need of reducing energy consumption, while producing the same activity with all the comfort and work efficiency. The common techniques to reduce the consumption are to use a less wasteful equipment, altering the equipment program to a more economical one or disconnecting appliances that are not necessary at the moment. However, there is no direct feedback from this performed actions, which leads to the situation where the user is not aware of the influence that these techniques have in the electrical bill. With the intension to give some control over the home consumption, Energy Management Systems (EMS) were developed. These systems allow the access to the consumption information and help understanding the energy waste. However, some studies have proven that these systems have a clear mismatch between the information that is presented and the one the user finds useful for his daily life, leading to demotivation of use. In order to create a solution more oriented towards the user’s demands, a specially tailored language (DSL) was implemented. This solution allows the user to acquire the information he considers useful, through the construction of questions about his energy consumption. The development of this language, following the Model Driven Development (MDD) approach, took into consideration the ideas of facility managers and home users in the phases of design and validation. These opinions were gathered through meetings with experts and a survey, which was conducted to the purpose of collecting statistics about what home users want to know.

Evaluation of the user-friendliness of seven new generation intensive care ventilators.

OBJECTIVE: To explore the user-friendliness and ergonomics of seven new generation intensive care ventilators. DESIGN: Prospective task-performing study. SETTING: Intensive care research laboratory, university hospital. METHODS: Ten physicians experienced in mechanical ventilation, but without prior knowledge of the ventilators, were asked to perform eight specific tasks [turning the ventilator on; recognizing mode and parameters; recognizing and setting alarms; mode change; finding and activating the pre-oxygenation function; pressure support setting; stand-by; finding and activating non-invasive ventilation (NIV) mode]. The time needed for each task was compared to a reference time (by trained physiotherapist familiar with the devices). A time >180 s was considered a task failure. RESULTS: For each of the tests on the ventilators, all physicians' times were significantly higher than the reference time (P < 0.001). A mean of 13 +/- 8 task failures (16%) was observed by the ventilator. The most frequently failed tasks were mode and parameter recognition, starting pressure support and finding the NIV mode. Least often failed tasks were turning on the pre-oxygenation function and alarm recognition and management. Overall, there was substantial heterogeneity between machines, some exhibiting better user-friendliness than others for certain tasks, but no ventilator was clearly better that the others on all points tested. CONCLUSIONS: The present study adds to the available literature outlining the ergonomic shortcomings of mechanical ventilators. These results suggest that closer ties between end-users and manufacturers should be promoted, at an early development phase of these machines, based on the scientific evaluation of the cognitive processes involved by users in the clinical setting.

Joint array combining and MLSE for single-user receivers in multipath Gaussian multiuser channels

The well-known structure of an array combiner along with a maximum likelihood sequence estimator (MLSE) receiveris the basis for the derivation of a space-time processor presentinggood properties in terms of co-channel and intersymbol interferencerejection. The use of spatial diversity at the receiver front-endtogether with a scalar MLSE implies a joint design of the spatialcombiner and the impulse response for the sequence detector. Thisis faced using the MMSE criterion under the constraint that thedesired user signal power is not cancelled, yielding an impulse responsefor the sequence detector that is matched to the channel andcombiner response. The procedure maximizes the signal-to-noiseratio at the input of the detector and exhibits excellent performancein realistic multipath channels.

Search Interfaces on the Web: Querying and Characterizing

Current-day web search engines (e.g., Google) do not crawl and index a significant portion of theWeb and, hence, web users relying on search engines only are unable to discover and access a large amount of information from the non-indexable part of the Web. Specifically, dynamic pages generated based on parameters provided by a user via web search forms (or search interfaces) are not indexed by search engines and cannot be found in searchers’ results. Such search interfaces provide web users with an online access to myriads of databases on the Web. In order to obtain some information from a web database of interest, a user issues his/her query by specifying query terms in a search form and receives the query results, a set of dynamic pages that embed required information from a database. At the same time, issuing a query via an arbitrary search interface is an extremely complex task for any kind of automatic agents including web crawlers, which, at least up to the present day, do not even attempt to pass through web forms on a large scale. In this thesis, our primary and key object of study is a huge portion of the Web (hereafter referred as the deep Web) hidden behind web search interfaces. We concentrate on three classes of problems around the deep Web: characterization of deep Web, finding and classifying deep web resources, and querying web databases. Characterizing deep Web: Though the term deep Web was coined in 2000, which is sufficiently long ago for any web-related concept/technology, we still do not know many important characteristics of the deep Web. Another matter of concern is that surveys of the deep Web existing so far are predominantly based on study of deep web sites in English. One can then expect that findings from these surveys may be biased, especially owing to a steady increase in non-English web content. In this way, surveying of national segments of the deep Web is of interest not only to national communities but to the whole web community as well. In this thesis, we propose two new methods for estimating the main parameters of deep Web. We use the suggested methods to estimate the scale of one specific national segment of the Web and report our findings. We also build and make publicly available a dataset describing more than 200 web databases from the national segment of the Web. Finding deep web resources: The deep Web has been growing at a very fast pace. It has been estimated that there are hundred thousands of deep web sites. Due to the huge volume of information in the deep Web, there has been a significant interest to approaches that allow users and computer applications to leverage this information. Most approaches assumed that search interfaces to web databases of interest are already discovered and known to query systems. However, such assumptions do not hold true mostly because of the large scale of the deep Web – indeed, for any given domain of interest there are too many web databases with relevant content. Thus, the ability to locate search interfaces to web databases becomes a key requirement for any application accessing the deep Web. In this thesis, we describe the architecture of the I-Crawler, a system for finding and classifying search interfaces. Specifically, the I-Crawler is intentionally designed to be used in deepWeb characterization studies and for constructing directories of deep web resources. Unlike almost all other approaches to the deep Web existing so far, the I-Crawler is able to recognize and analyze JavaScript-rich and non-HTML searchable forms. Querying web databases: Retrieving information by filling out web search forms is a typical task for a web user. This is all the more so as interfaces of conventional search engines are also web forms. At present, a user needs to manually provide input values to search interfaces and then extract required data from the pages with results. The manual filling out forms is not feasible and cumbersome in cases of complex queries but such kind of queries are essential for many web searches especially in the area of e-commerce. In this way, the automation of querying and retrieving data behind search interfaces is desirable and essential for such tasks as building domain-independent deep web crawlers and automated web agents, searching for domain-specific information (vertical search engines), and for extraction and integration of information from various deep web resources. We present a data model for representing search interfaces and discuss techniques for extracting field labels, client-side scripts and structured data from HTML pages. We also describe a representation of result pages and discuss how to extract and store results of form queries. Besides, we present a user-friendly and expressive form query language that allows one to retrieve information behind search interfaces and extract useful data from the result pages based on specified conditions. We implement a prototype system for querying web databases and describe its architecture and components design.

An examination of factors influencing ERP key-user satisfaction: A qualitative case study

Several companies are trying to improve their operation efficiency by implementing an enterprise resource planning (ERP) system that makes it possible to control the resources of the company in real time. However, the success of the implementation project is not a foregone conclusion; a significant part of these projects end in a failure, one way or another. Therefore it is important to investigate ERP system implementation more closely in order to increase understanding about factors influencing ERP system success and to improve the probability of a successful ERP implementation project. Consequently, this study was initiated because a manufacturing case company wanted to review the success of their ERP implementation project. To be exact, the case company hoped to gain both information about the success of the project and insight for future implementation improvement. This study investigated ERP success specifically by examining factors that influence ERP key-user satisfaction. User satisfaction is one of the most commonly applied indicators of information system success. The research data was mainly collected by conducting theme interviews. The subjects of the interviews were six key-users of the newly implemented ERP system. The interviewees were closely involved in the implementation project. Furthermore, they act as representative users that utilize the new system in everyday business processes. The collected data was analyzed by thematizing. Both data collection and analysis were guided by a theoretical frame of reference. This frame was based on previous research on the subject. The results of the study aligned with the theoretical framework to large extent. The four principal factors influencing key-user satisfaction were change management, contractor service, key-user’s system knowledge and characteristics of the ERP product itself. One of the most significant contributions of the research is that it confirmed the existence of a connection between change management and ERP key-user satisfaction. Furthermore, it discovered two new sub-factors influencing contractor service related key-user satisfaction. In addition, the research findings indicated that in order to improve the current level of key-user satisfaction, the case company should pay special attention to system functionality improvement and enhancement of the key-users’ knowledge. During similar implementation projects in the future, it would be important to assure the success of change management and contractor service related processes.

User Generated Content in Researching for Design: How the Internet Supports Creativity

Résumé Cette recherche a débuté avec l’idée que l’Internet est en train de changer la manière dont nous créons des connaissances et du contenu culturel. Notre point de départ était d’utiliser l’Internet afin de rassembler et amplifier plusieurs points de vue dans un processus de design. Une approche complexe a exposé l’Internet comme un système et conséquemment comme une plateforme pour l’innovation. La structure ouverte de l’Internet a soutenu le mouvement participatif des usagers qui ont choisi de partager leurs besoins, leurs désirs et leurs solutions. Notre recherche a pour but d’étudier ce contenu généré par les usagers en ligne et comprendre sa valeur pour les designers. Les usagers créatifs veulent s’exprimer et participer activement dans le processus de design. Notre recherche tente de démontrer que les designers ont beaucoup à apprendre du contenu généré par les usagers car ceux-ci soumettent des éléments qui ont attrait à toutes les étapes du processus de design et révèlent des relations présentes dans la situation de design à l’étude. Pour en apprendre plus sur ce contenu nous nous demandons : Quel type d’information offre le contenu généré par les usagers pour la phase de recherche dans le processus de design. Afin de centrer la portée de l’étude, nous nous sommes aussi questionné si cette information est plus pertinente au design de produits, au design de services ou au design de système de produits et de services. Aspirant aux idéaux du design participatif, notre méthodologie fut développée afin d’apprendre comment le contenu généré par les usagers pourrait influencer le processus de design. Pour ce faire, nous avons choisi de chercher sur l’Internet pour du contenu qui concerne la mobilité via l’usage d’une automobile. Les trois différents types de média considérés étaient les vidéos sur YouTube, les images sur Flickr et les textes sur Blogger. Afin de répondre à notre première question de recherche, nous nous sommes penchés sur deux éléments lorsque l’on recherche pour le design : les espaces de design et les relations de design. Premièrement, nous avons catégorisé le contenu récolté selon l’espace problème, créatif et solution. Deuxièmement, nous avons catégorisé le contenu dépendant de laquelle des relations de design elle démontrait soit une combinaison d’usagers, objets et contextes. Dans le but de répondre à la deuxième question de cette recherche, nous avons examiné trois types V de produits de design : les automobiles privées comme produit, le partage de voiture comme système de produit et de service, et le taxi comme service. Chaque élément pertinent généré par les usagés trouvé dans cette recherche fut catégorisé jusqu’à ce que l’on récolte 50 échantillons pour chaque combinaison de ces variables. Nous en sommes arrivés avec une matrice de 50 éléments de chaque produit de design, pour chacun des médias, puis catégorisé selon les espaces de design et les relations dans le design. Cette recherche démontre que l’Internet, comme médium, produit les conditions avantageuses pour que les usagers partagent de grandes quantités de contenu original et diversifié qui est pertinent aux situations de design. À partir de nos données de recherche, nous avons identifié des tendances dans le contenu généré par les usagers. Notamment, nous sommes en mesure d’affirmer que le contenu généré par les usagers offre de l’information pertinente à la recherche pour le design, et ce dans tous les espaces de design et toutes les relations de design. Il en fut de même pour les différentes issues du design car du contenu sur les produits, les systèmes de produits et de services et les services était présent et pertinent. Bref, nous avons démontré que l’Internet supporte la créativité et conséquemment il y abonde de contenu créatif produit par les usagers. Suivant dans les traces dessinées par d’autres chercheurs en design participatif, cette étude devrait être considérée comme un nouvel exemple des moyens qu’ont les designers pour percevoir les besoins tacites des usagers en leur permettant d’exprimer leurs idées. Alors que ceux-ci créent librement et intuitivement ainsi exposant leurs besoins, solutions et idées, les designers peuvent porter un regard de tierce partie sur les résultats. Jumelant des techniques comme le crowdsourcing et le brainstorming, nous avons créé une nouvelle activité et le néologisme : brainsourcing. En demeurant dans une forme de pratique réflexive, les designers peuvent réfléchir et ajouter au contenu généré par les usagers qui lui n’est pas biaisé par une éducation ou une culture du design. Ce processus est similaire au design participatif professionnel où le brainsourcing est une activité parallèle lorsque le designer fait des recherches pour le design. C’est cette perspective sur la somme des idées des participants qui peut contribuer à comprendre la complexité de la situation de design. VI Cette recherche a aussi soulevé des questions par rapport à l’effet de démocratisation de l’Internet. Bien que les usagers n’ont pas l’éducation, ni les habiletés des designers, ils aspirent à démocratiser le processus du design en voulant participer activement et en exposant leurs besoins, idées et solutions. Nous avons pu déterminer que les usagers n’étaient pas qualifiés pour entreprendre le processus complet du design comme les designers professionnels, mais nous avons observé directement la capacité des usagers à mettre de l’avant leur créativité. À propos de la relation entre les usagers créatifs et les designers, nous avons étudié des langages communs tels les scénarios et les prototypes. Tous deux sont présents dans le contenu généré par les usagers que nous avons récolté dans nos recherches sur Internet. Ceci nous a mené vers une nouvelle perspective sur l’activité du design où des opportunités créatives ressortent d’une conversation avec les usagers. Cette recherche a dévoilé de grandes tendances dans la manière dont les usagers communiquent naturellement dans un processus de design. Nous espérons avoir offert un aperçu de comment les designers peuvent prendre avantage de tous les types de contenu généré par les usagers en ligne. Dans le futur, nous souhaitons que les designers aient la possibilité d’interagir avec les participants en prenant le rôle de facilitateur de la conversation. La responsabilité du résultat ne tombe pas sur les épaules du designer car son mandat est d’assurer le bon fonctionnement du processus. Les designers rejoignent les usagers en ne demandant plus comment les choses peuvent être créées, mais pourquoi elles devraient exister. En tant que designers, nous aspirons à générer plus à partir de nouvelles connaissances, nous aspirons à créer plus de sens. Mots clés: Recherche en design, complexité, design participatif, contenu généré par les usagers, démocratisation, Internet, créativité, crowdsourcing, brainstorming, brainsourcing, réflexion-en-action.