STYREENI-BUTADIEENILATEKSIN VALMISTUS EMULSIOPOLYMEROIN-NILLA JA LATEKSIN VISKOSITEETTIIN VAIKUTTAVAT TEKIJÄT.

Työn tavoitteina oli kirjallisuusosassa selvittää emulsiopolymeroinnin perusperiaatteet ja lateksien viskositeettiin vaikuttavat tekijät. Kokeellisessa osassa selvitettiin eräiden kaupallisten lateksien viskositeettiin vaikuttavia tekijöitä. Tutkittujen kaupallisten lateksien viskositeettien riippuvuudelle kuiva-ainepitoisuudesta saatiin tulokset, jotka ovat melko hyvin yhtäpitäviä kirjallisuudesta saatujen tulosten kanssa. Tutkitut lateksit erosivat lähinnä maksimaalisen polymeeripartikkelin tilavuusosuuden kohdalla kirjallisuudesta saaduista arvoista. Tämän todettiin johtuvan sähköisen kaksoiskerroksen ja partikkelin pintaan kiinnittyneiden ryhmien vaikutuksesta. Tämä tulos varmentui elektrolyyttipitoisuuden vaikutusta selvitettäessä. Elektrolyyttilisäys laski lateksien viskositeetteja ja pienensi lateksien välisiä viskositeettieroja. Lateksin pH:n nostolla oli selvästi viskositeettia kasvattava vaikutus. Tämä johtuu osaltaan myös sähköisen kaksoiskerroksen kasvamisesta happoryhmien ionisoituessa. Latekseja toisiinsa verrattaessa havaittiin selkeästi karboksyylihapon ja initiaattorista peräisin olevien happoryhmien määrän vaikutus lateksin viskositeetin muutokselle. Paljon karboksyylihappoa ja initiaattoria sisältävien lateksien viskositeetti muuttui selvästi voimakkaammin pH:n muuttuessa. Latekseissa havaittiin myös ero heikkojen karboksyylihapporyhmien ja vahvojen initiaattorista peräisin olevien happoryhmien ionisoitumisen välillä. Vahvat happoryhmät ionisoituivat matalammassa pH:ssa kuin vahvat ja nostavat näin myös viskositeettia matalammassa pH:ssa kuin karboksyylihapporyhmät. Anionisen emulgaattorin lisäyksellä ei havaittu olevan kovinkaan suurta vaikutusta viskositeettiin. Partikkelikoon vaikutusta voitiin tutkia ainoastaan prosessista saadun mittausaineiston avulla. Partikkelikoon vaikutukset peittyivät suurelta osin muiden tekijöiden alle. Ainoastaan yhdelle lateksityypille saatiin selkeä riippuvuus partikkelikoon ja viskositeetin välille. Riippuvuus noudattaa kirjallisuudesta saatuja tietoja eli partikkelikoon kasvaessa viskositeetti laskee. Myös lateksin viskositeetin riippuvuus käytetystä leikkaus-nopeudesta noudattaa hyvin kirjallisuudesta saatuja tuloksia. Lateksin viskositeetti laskee leikkausnopeuden kasvaessa.

Friedman's Excess energy and the McMillan-Mayer theory of solutions:Thermodynamics

In his version of the theory of multicomponent systems, Friedman used the analogy which exists between the virial expansion for the osmotic pressure obtained from the McMillan-Mayer (MM) theory of solutions in the grand canonical ensemble and the virial expansion for the pressure of a real gas. For the calculation of the thermodynamic properties of the solution, Friedman proposed a definition for the"excess free energy" that is a reminder of the ancient idea for the"osmotic work". However, the precise meaning to be attached to his free energy is, within other reasons, not well defined because in osmotic equilibrium the solution is not a closed system and for a given process the total amount of solvent in the solution varies. In this paper, an analysis based on thermodynamics is presented in order to obtain the exact and precise definition for Friedman"s excess free energy and its use in the comparison with the experimental data.

Arseenin käyttö sinkkitehtaan koboltinpoistoon

Työssä selvitettiin kuparielektrolyysissä syntyvän sivutuotteen, arseenitrioksidin, soveltuvuutta The New Boliden Kokkola Zinc Oy:n sinkkitehtaan liuospuhdistuksen koboltinpoistovaiheeseen. Nykyään sinkkitehtaalla käytetään puhdasta arseenitrioksidia koboltinpoiston apuaineena. Tällä hetkellä kuparielektrolyysin arseenista valmistetaan puunsuoja-aineita. Lainsäädäntö muuttuu siten että tulevaisuudessa kyseisten puunsuoja-aineiden käyttöä tullaan yhä rajoittamaan. Kun puunsuoja-aineiden kulutus vähenee, täytyy syntyvä arseeni varastoida jätealueelle ellei sille löydetä muuta käyttöä. Arseenin varastointitarve ei lisäänny jos kuparielektrolyysistä saatava arseeni voidaan hyödyntää sinkkitehtaalla. Kuparielektrolyysissä syntyvä arseenitrioksidi ei ole puhdasta. Työssä selvitettiin epäpuh-tauksien vaikutusta sinkkitehtaan liuospuhdistuksen koboltinpoistovaiheeseen. Kokeiden olosuhteet pyrittiin yhdenmukaistamaan sinkkitehtaan koboltinpoistovaiheessa vallitsevia olosuhteita vastaaviksi. Kokeissa käytetyillä arseeniliuosten eri epäpuhtaustasoilla ei havaittu olevan selkeää eroa liuospuhdistuskyvyssä. Koetulokset antavat viitteitä siitä, että koboltinpoistoprosessi on oletettua epäherkempi arseeniliuoksen epäpuhtauksien vaikutuksille. Kirjallisuudesta haettiin arseenitrioksidin valmistukseen ja puhdistamiseen liittyvää aineistoa. Valmistusmenetelminä tarkasteltiin valmistusta arseenimalmista ja kuparielektrolyytistä ja puhdistusmenetelminä uudelleenkiteytystä, jäädytys-sulatusprosessia ja ioninvaihtoa. Työssä puhdistettiin kuparielektrolyysin liuospuhdistuksessa syntyvää arseenitrioksidia. Puhdistuslaitteistosta tehtiin alustava prosessisuunnitelma.

Effective Electrodiffusion equation for non uniform nanochannels

We derive a one dimensional formulation of the Planck-Nernst-Poisson equation to describe the dynamics of of a symmetric binary electrolyte in channels whose section is of nanometric section and varies along the axial direction. The approach is in the spirit of the Fick-Jacobs di fusion equation and leads to a system of coupled equations for the partial densities which depends on the charge sitting at the walls in a non trivial fashion. We consider two kinds of non uniformities, those due to the spatial variation of charge distribution and those due to the shape variation of the pore and report one and three-dimensional solutions of the electrokinetic equations.

L'insuffisance rénale chronique: quelle est la diète optimale

The optimal diet for chronic kidney disease (CKD) is an issue frequently brought up by patients and/or their relatives during outpatient visits. For patients without malnutrition who are motivated and supported by an experienced multidisciplinary team, the optimal protein intake of 0,6 g/kg of ideal body weight/day is recommended to halt the progression of CKD. A calorie intake of 30 to 35 kcal/kg of ideal body weight/day is necessary to reduce the risk of malnutrition from a low protein diet and to maintain a neutral nitrogen balance. A low-salt diet, namely 5 to 6 g/d, is useful to optimize the treatment of hypertension associated with CKD and to limit fluid overload. At the advanced stage of CKD, it is also necessary to restrict the intake of phosphorus and sometimes potassium. Given the complexity of optimal renal diet, coordination between general practitioners, nephrologists and dietitians is essential to foster optimal care.

Furosemide stimulation of parathormone in humans: role of the calcium-sensing receptor and the renin-angiotensin system.

Interactions between sodium and calcium regulating systems are poorly characterized but clinically important. Parathyroid hormone (PTH) levels are increased shortly after furosemide treatment by an unknown mechanism, and this effect is blunted by the previous administration of a calcimimetic in animal studies. Here, we explored further the possible underlying mechanisms of this observation in a randomized crossover placebo-controlled study performed in 18 human males. Volunteers took either cinacalcet (60 mg) or placebo and received a 20 mg furosemide injection 3 h later. Plasma samples were collected at 15-min intervals and analyzed for intact PTH, calcium, sodium, potassium, magnesium, phosphate, plasma renin activity (PRA), and aldosterone up to 6 h after furosemide injection. Urinary electrolyte excretion was also monitored. Subjects under placebo presented a sharp increase in PTH levels after furosemide injection. In the presence of cinacalcet, PTH levels were suppressed and marginal increase of PTH was observed. No significant changes in electrolytes and urinary excretion were identified that could explain the furosemide-induced increase in PTH levels. PRA and aldosterone were stimulated by furosemide injection but were not affected by previous cinacalcet ingestion. Expression of NKCC1, but not NKCC2, was found in parathyroid tissue. In conclusion, our results indicate that furosemide acutely stimulates PTH secretion in the absence of any detectable electrolyte changes in healthy adults. A possible direct effect of furosemide on parathyroid gland needs further studies.

How to monitor the brain in septic patients?

Brain injury is frequently observed after sepsis and may be primarily related to the direct effects of the septic insult on the brain (e.g., brain edema, ischemia, seizures) or to secondary/indirect injuries (e.g., hypotension, hypoxemia, hypocapnia, hyperglycemia). Management of brain injury in septic patients is first focused to exclude structural intracranial complications (e.g., ischemic/hemorrhagic stroke) and possible confounders (e.g., electrolyte alterations or metabolic disorders, such as dysglycemia). Sepsis-associated brain dysfunction is frequently a heterogeneous syndrome. Despite increasing understanding of main pathophysiologic determinants, therapy is essentially limited to protect the brain against further cerebral damage, by way of "simple" therapeutic manipulations of cerebral perfusion and oxygenation and by avoiding over-sedation. Non-invasive monitoring of cerebral perfusion and oxygenation with transcranial Doppler (TCD) and near-infrared spectroscopy (NIRS) is feasible in septic patients. Electroencephalography (EEG) allows detection of sepsis-related seizures and holds promise also as sedation monitoring. Brain CT-scan detects intra-cerebral structural lesions, while magnetic resonance imaging (MRI) provides important insights into primary mechanisms of sepsis-related direct brain injury, (e.g., cytotoxic vs. vasogenic edema) and the development of posterior reversible encephalopathy. Together with EEG and evoked potentials (EP), MRI is also important for coma prognostication. Emerging clinical evidence suggests monitoring of the brain in septic patients can be implemented in the ICU. The objective of this review was to summarize recent clinical data about the role of brain monitoring - including TCD, NIRS, EEG, EP, CT, and MRI - in patients with sepsis and to illustrate its potential utility for the diagnosis, management and prognostication.

GdBaCo2O5+x layered perovskite as an intermediate temperature solid oxide fuel cell cathode

GdBaCo2O5+x (GBCO) was evaluated as a cathode for intermediate-temperature solid oxide fuel cells. A porous layer of GBCO was deposited on an anode-supported fuel cell consisting of a 15m thick electrolyte of yttria-stabilized zirconia (YSZ) prepared by dense screen-printing anda Ni–YSZ cermet as an anode (Ni–YSZ/YSZ/GBCO). Values of power density of 150 mW cm−2 at 700◦C and ca. 250 mW cm−2 at 800◦C are reported for this standard configuration using 5% of H2 in nitrogen as fuel. An intermediate porous layer of YSZ was introduced between the electrolyte and the cathode improving the performance of the cell. Values for power density of 300 mW cm−2 at 700◦C and ca. 500 mW cm−2 at 800◦C in this configuration were achieved.

To return or to discard? Randomised trial on gastric residual volume management

Background: The control of gastric residual volume (GRV) is a common nursing intervention in intensive care; however the literature shows a wide variation in clinical practice regarding the management of GRV, potentially affecting patients" clinical outcomes. The aim of this study is to determine the effect of returning or discarding GRV, on gastric emptying delays and feeding, electrolyte and comfort outcomes in critically ill patients. Method: A randomised, prospective, clinical trial design was used to study 125 critically ill patients, assigned to the return or the discard group. Main outcome measure was delayed gastric emptying. Feeding outcomes were determined measuring intolerance indicators, feeding delays and feeding potential complications. Fluid and electrolyte measures included serum potassium, glycaemia control and fluid balance. Discomfort was identified by significant changes in vital signs. Results: Patients in both groups presented similar mean GRV with no significant differences found (p=0.111), but participants in the intervention arm showed a lower incidence and severity of delayed gastric emptying episodes (p=0.001). No significant differences were found for the rest of outcome measurements, except for hyperglycaemia. Conclusions: The results of this study support the recommendation to reintroduce gastric content aspirated to improve GRV management without increasing the risk for potential complications.

Eletrodissolução de ligas de latão empregando sistemas de análise em fluxo para a determinação de cobre, zinco e chumbo por ICP-AES

An on-line electrodissolution procedure implemented in a flow injection system for determination of copper, zinc and lead in brasses alloys by ICP-AES is described. Sample dissolution procedure was carried out by using a PTFE chamber and a DC power supply with constant current. Solid sample was attached to chamber as anode and a gold tubing coupled in the chamber was used as cathode. An electrolytic solution flowing through the gold tubing closed the electric circuit with sample, in order to provide condition for electric dissolution when the DC power supply was switched on. The best results were achieved by using a 1.5 mol l-1 nitric acid solution as electrolyte and a 2.5 A current intensity. The procedure presented a good performance characterized by a relative standard deviation better than < 5% (n=5) and a sample throughput of 180 determinations per hour for Cu, Zn and Pb. Results were in agreement with those obtained by conventional acid dissolution (99% confidence level).

Geração eletroquímica do hidreto de selênio em sistema de injeção em fluxo com detecção por espectrometria de absorção atômica com chama Ar-Glp

This paper presents a system for electrochemical hydride generation using flow-injection and atomic absorption spectrometry to determine selenium in biological materials. The electrolytic cell was constructed by assembling two reservoirs, one for the sample and the other for the electrolytic solution separated by a Nafion membrane. Each compartment had a Pt electrode. The sample and electrolyte flow-rates, acidic media, and applied current were adjusted to attain the best analytical performance and ensure the membrane lifetime. The atomisation system used a T quartz tube in an air-LPG flame. The composition of the flame, the observation height, and the argon flow rate used to carry the hydrides were critically investigated. The system allowed to perform thirty determinations per hour with a detection limit of 10 mug L-1 of Se. Relative standard deviations were in general lower than 1.5% for a solution containing 20.0 and 34.0 mug L-1 of Se in a typical sample digest. Accuracy was assessed analysing the certified materials: rice flour (NIST-1568) from National Institute of Standard and Technology and dried fish (MA-A-2), whole animal blood (A-2/1974) from the International Atomic Energy Agency.

Estudo polarográfico sobre a determinação de Fe(III) utilizando-se a técnica da polarografia de pulso diferencial

A differential pulse polarographic study with the objective to determine iron (III) in presense of copper (II) in a supporting electrolyte based on citrate - EDTA was made. The best experimental conditions found were a supporting electrolyte of citrate 0.25 mol L-1, EDTA 0.050 mol L-1 and KNO3 0.50 mol L-1, pH 5.00. In this media iron (III) showed a polarographic peak in -0.08 V and the copper (II) in -0.34 V, both vs. Ag/AgCl (saturated KCl). Thus, a analytical method was developed and applied to determine iron (III) in brass alloy, a matrix were copper is in large excess over iron. The results obtained showed no interference of copper in the iron determination. The value of 0.21% of iron in the sample alloy composition was obtained and the method was validated by atomic absortion and recovery test, and the results exhibited a good agreement with the proposed method.

Construção e aplicação de eletrodo de aço inoxidável UNS S31254 como eletrodo indicador em titulações condutimétricas

UNS S31254 SS electrodes have been built to substitute platinum in conductimetric titrations. The electrodes were tested in both acid-basic titration (chloridric acid and sodium hydroxide) and precipitation titration (sodium chloride and argentum nitrate as titrant). The practical application was exemplified from conductimetric tritations of HF ¾ HNO3 mixtures used in metalurgical industry to passivate stainless steels. The results were compared with those obtained using commercial platinum electrodes. The equivalent volumes obtained were comparable within 3% experimental error. Its application depends on the nature of electrolyte. These results have shown that stainless steel, less expensive than platinum (about three order of magnitude), can substitute platinum electrodes in routine analyses and didactic laboratories.

Síntese eletroquímica do ion ferrato(VI)

The optimization of ferrate(VI) ion generation has been studied due to its favorable characteristics for application in several fields, including environmental quality control. The paper presents the best conditions for electrolytic generation of ferrate(VI) in alkaline media. An appropriate electrolyte was NaOH, 10 mol/L. Circulation of the electrolyte solution was important to avoid acidification close to the anode surface. An anode pre-cleaning with 10% HCl was more efficient than a cathodic pre-polarization. Among the distinct anode materials tested, pig iron showed the best performance, allowing up to 20 g/L of Na2FeO4, in 10 mol/L NaOH solution to be obtained, after 7 h of reactor operation, which is a concentration higher than those found in literature for alternative processes.

Electroluminescence of silicon- and some metal oxides

In the present work electroluminescence in Si-SiO2 structures has been investigated. Electroluminescence has been recorded in the range of 250-900 nm in a system of electrolyte-insulator-semiconductor at the room temperature. The heating process of electrons in SiO2 was studied and possibility of separation it into two phases has been shown. The nature of luminescence centers and the model of its formation were proposed. This paper also includes consideration of oxide layer formation. Charge transfer mechanisms have been attended as well. The nature of electroluminescence is understood in detail. As a matter of fact, electron traps in silicon are the centers of luminescence. Electroluminescence occurs when electrons move from one trap to another. Thus the radiation of light quantum occurs. These traps appear as a result of the oxide growth. At the same time the bonds deformation of silicon atoms with SiOH groups is not excludes. As a result, dangling bonds are appeared, which are the trapping centers or the centers of luminescence.