Triangulation mobility of auto-theft offenders

This research paper presents an examination of the journey to and from crime for autotheft offenders in the UK. For 852 offences, ‘wheel’ distances are calculated for triangles formed by offenders’ home location, theft location, and vehicle disposal location. The study demonstrates typical isosceles mobility triangles; distances travelled to and from home locations are roughly equal, whereas distances between theft and disposal points were shorter. Distances travelled by offenders under 17 years old and offences involving drug and drink were shown to be shorter than comparison groups. Prolifi c offenders tend to travel further, although there is signifi cant variation in this subgroup. Explanations and implications are discussed.

Accuracy and applications of group MEG studies using cortical source locations estimated from participants' scalp surfaces

We contend that powerful group studies can be conducted using magnetoencephalography (MEG), which can provide useful insights into the approximate distribution of the neural activity detected with MEG without requiring magnetic resonance imaging (MRI) for each participant. Instead, a participant's MRI is approximated with one chosen as a best match on the basis of the scalp surface from a database of available MRIs. Because large inter-individual variability in sulcal and gyral patterns is an inherent source of blurring in studies using grouped functional activity, the additional error introduced by this approximation procedure has little effect on the group results, and offers a sufficiently close approximation to that of the participants to yield a good indication of the true distribution of the grouped neural activity. T1-weighted MRIs of 28 adults were acquired in a variety of MR systems. An artificial functional image was prepared for each person in which eight 5 × 5 × 5 mm regions of brain activation were simulated. Spatial normalisation was applied to each image using transformations calculated using SPM99 with (1) the participant's actual MRI, and (2) the best matched MRI substituted from those of the other 27 participants. The distribution of distances between the locations of points using real and substituted MRIs had a modal value of 6 mm with 90% of cases falling below 12.5 mm. The effects of this -approach on real grouped SAM source imaging of MEG data in a verbal fluency task are also shown. The distribution of MEG activity in the estimated average response is very similar to that produced when using the real MRIs. © 2003 Wiley-Liss, Inc.

Practical network coding for two way relay channels in LTE networks

In this paper, the implementation aspects and constraints of the simplest network coding (NC) schemes for a two-way relay channel (TWRC) composed of a user equipment (mobile terminal), an LTE relay station (RS) and an LTE base station (eNB) are considered in order to assess the usefulness of the NC in more realistic scenarios. The information exchange rate gain (IERG), the energy reduction gain (ERG) and the resource utilization gain (RUG) of the NC schemes with and without subcarrier division duplexing (SDD) are obtained by computer simulations. The usefulness of the NC schemes are evaluated for varying traffic load levels, the geographical distances between the nodes, the RS transmit powers, and the maximum numbers of retransmissions. Simulation results show that the NC schemes with and without SDD, have the throughput gains 0.5% and 25%, the ERGs 7 - 12% and 16 - 25%, and the RUGs 0.5 - 3.2%, respectively. It is found that the NC can provide performance gains also for the users at the cell edge. Furthermore, the ERGs of the NC increase with the transmit power of the relay while the ERGs of the NC remain the same even when the maximum number of retransmissions is reduced.

Cross-category demand effects of price promotions

Do promotions in a certain category lead to higher revenues in other categories? If so, to what degree? The answers to these questions are highly relevant for retailers that supply products in different categories. Empirical findings in studies that consider a limited number of categories indicate small promotional cross-category effects. This study develops a framework to determine the impact of price promotions on category revenues that include interdependencies among a substantial number of categories at the category demand level. The own- and cross-category demand effects are moderated by variables such as promotion intensity, category characteristics (own-category effects), and spatial distances between shelf locations (cross-category effects). The empirical results based on daily store-level scanner data show that approximately half of all price promotions expand own-category revenues, especially for categories with deeper supported discounts. There is a high probability (61%) that a price promotion affects sales of at least one other category. The number of categories affected is not greater than two. Moderate evidence supports the existence of cross-promotional effects between categories more closely located in a store.

Determining which factors influence the optimum multifocal contact lens correction for presbyopia

Presbyopia is a consequence of ageing and is therefore increasing inprevalence due to an increase in the ageing population. Of the many methods available to manage presbyopia, the use of contact lenses is indeed a tried and tested reversible option for those wishing to be spectacle free. Contact lens options to correct presbyopia include multifocal contact lenses and monovision.Several options have been available for many years with available guides to help choose multifocal contact lenses. However there is no comprehensive way to help the practitioner selecting the best option for an individual. An examination of the simplest way of predicting the most suitable multifocal lens for a patient will only enhance and add to the current evidence available. The purpose of the study was to determine the current use of presbyopic correction modalities in an optometric practice population in the UK and to evaluate and compare the optical performance of four silicone hydrogel soft multifocal contact lenses and to compare multifocal performance with contact lens monovision. The presbyopic practice cohort principal forms of refractive correction were distance spectacles (with near and intermediate vision providedby a variety of other forms of correction), varifocal spectacles and unaided distance with reading spectacles, with few patients wearing contact lenses as their primary correction modality. The results of the multifocal contact lens randomised controlled trial showed that there were only minor differences in corneal physiology between the lens options. Visual acuity differences were observed for distance targets, but only for low contrast letters and under mesopic lighting conditions. At closer distances between 20cm and 67cm, the defocus curves demonstrated that there were significant differences in acuity between lens designs (p < 0.001) and there was an interaction between the lens design and the level of defocus (p < 0.001). None of the lenses showed a clear near addition, perhaps due to their more aspheric rather than zoned design. As expected, stereoacuity was reduced with monovision compared with the multifocal contact lens designs, although there were some differences between the multifocal lens designs (p < 0.05). Reading speed did not differ between lens designs (F = 1.082, p = 0.368), whereas there was a significant difference in critical print size (F = 7.543, p < 0.001). Glare was quantified with a novel halometer and halo size was found to significantly differ between lenses(F = 4.101, p = 0.004). The rating of iPhone image clarity was significantly different between presbyopic corrections (p = 0.002) as was the Near Acuity Visual Questionnaire (NAVQ) rating of near performance (F = 3.730, p = 0.007).The pupil size did not alter with contact lens design (F = 1.614, p = 0.175), but was larger in the dominant eye (F = 5.489, p = 0.025). Pupil decentration relative to the optical axis did not alter with contact lens design (F = 0.777, p =0.542), but was also greater in the dominant eye (F = 9.917, p = 0.003). It was interesting to note that there was no difference in spherical aberrations induced between the contact lens designs (p > 0.05), with eye dominance (p > 0.05) oroptical component (ocular, corneal or internal: p > 0.05). In terms of subjective patient lens preference, 10 patients preferred monovision,12 Biofinity multifocal lens, 7 Purevision 2 for Presbyopia, 4 AirOptix multifocal and 2 Oasys multifocal contact lenses. However, there were no differences in demographic factors relating to lifestyle or personality, or physiological characteristics such as pupil size or ocular aberrations as measured at baseline,which would allow a practitioner to identify which lens modality the patient would prefer. In terms of the performance of patients with their preferred lens, it emerged that Biofinity multifocal lens preferring patients had a better high contrast acuity under photopic conditions, maintained their reading speed at smaller print sizes and subjectively rated iPhone clarity as better with this lens compared with the other lens designs trialled. Patients who preferred monovision had a lower acuity across a range of distances and a larger area of glare than those patients preferring other lens designs that was unexplained by the clinical metrics measured. However, it seemed that a complex interaction of aberrations may drive lens preference. New clinical tests or more diverse lens designs which may allow practitioners to prescribe patients the presbyopic contact lens option that will work best for them first time remains a hope for the future.

Classification of Chenopodium Genus Populations and Species Based on Continuous and Categorical Variables

2000 Mathematics Subject Classification: 62P10, 62H30

Resources, strategies, location determinants, and host country location choice by emerging market firms

The extant literature had studied the determinants of the firms’ location decisions with help of host country characteristics and distances between home and host countries. Firm resources and its internationalization strategies had found limited attention in this literature. To address this gap, the research question in this dissertation was whether and how firms’ resources and internationalization strategies impacted the international location decisions of emerging market firms. ^ To explore the research question, data were hand-collected from Indian software firms on their location decisions taken between April 2000 and March 2009. To analyze the multi-level longitudinal dataset, hierarchical linear modeling was used. The results showed that the internationalization strategies, namely market-seeking or labor-seeking had direct impact on firms’ location decision. This direct relationship was moderated by firm resource which, in case of Indian software firms, was the appraisal at CMMI level-5. Indian software firms located in developed countries with a market-seeking strategy and in emerging markets with a labor-seeking strategy. However, software firms with resource such as CMMI level-5 appraisal, when in a labor-seeking mode, were more likely to locate in a developed country over emerging market than firms without the appraisal. Software firms with CMMI level-5 appraisal, when in market-seeking mode, were more likely to locate in a developed country over an emerging market than firms without the appraisal. ^ It was concluded that the internationalization strategies and resources of companies predicted their location choices, over and above the variables studied in the theoretical field of location determinants.^

Nuclear magnetic resonance spectroscopic and computational investigations of chloroperoxidase catalyzed regio- and enantio-selective transformations

Chloroperoxidase (CPO) is the most versatile heme-containing enzyme that catalyzes a broad spectrum of reactions. The remarkable feature of this enzyme is the high regio- and enantio-selectivity exhibited in CPO-catalyzed oxidation reactions. The aim of this dissertation is to elucidate the structural basis for regio- and enantio-selective transformations and investigate the application of CPO in biodegradation of synthetic dyes. ^ To unravel the mechanism of CPO-catalyzed regioselective oxidation of indole, the dissertation explored the structure of CPO-indole complex using paramagnetic relaxation and molecular modeling. The distances between the protons of indole and the heme iron revealed that the pyrrole ring of indole is oriented toward the heme with its 2-H pointing directly at the heme iron. This provides the first experimental and theoretical explanation for the "unexpected" regioselectivity of CPO-catalyzed indole oxidation. Furthermore, the residues including Leu 70, Phe 103, Ile 179, Val 182, Glu 183, and Phe 186 were found essential to the substrate binding to CPO. These results will serve as a lighthouse in guiding the design of CPO mutants with tailor-made activities for biotechnological applications. ^ To understand the origin of the enantioselectivity of CPO-catalyzed oxidation reactions, the interactions of CPO with substrates such as 2-(methylthio)thiophene were investigated by nuclear magnetic resonance spectroscopy (NMR) and computational techniques. In particular, the enantioselectivity is partly explained by the binding orientation of substrates. In third facet of this dissertation, a green and efficient system for degradation of synthetic dyes was developed. Several commercial dyes such as orange G were tested in the CPO-H2O 2-Cl- system, where degradation of these dyes was found very efficient. The presence of halide ions and acidic pH were found necessary to the decomposition of dyes. Significantly, the results revealed that this degradation of azo dyes involves a ferric hypochlorite intermediate of CPO (Fe-OCl), compound X.^

Resource, Strategies, Location Determinants, And Host Country Location Choice By Emerging Market Firms

The extant literature had studied the determinants of the firms’ location decisions with help of host country characteristics and distances between home and host countries. Firm resources and its internationalization strategies had found limited attention in this literature. To address this gap, the research question in this dissertation was whether and how firms’ resources and internationalization strategies impacted the international location decisions of emerging market firms. To explore the research question, data were hand-collected from Indian software firms on their location decisions taken between April 2000 and March 2009. To analyze the multi-level longitudinal dataset, hierarchical linear modeling was used. The results showed that the internationalization strategies, namely market-seeking or labor-seeking had direct impact on firms’ location decision. This direct relationship was moderated by firm resource which, in case of Indian software firms, was the appraisal at CMMI level-5. Indian software firms located in developed countries with a market-seeking strategy and in emerging markets with a labor-seeking strategy. However, software firms with resource such as CMMI level-5 appraisal, when in a labor-seeking mode, were more likely to locate in a developed country over emerging market than firms without the appraisal. Software firms with CMMI level-5 appraisal, when in market-seeking mode, were more likely to locate in a developed country over an emerging market than firms without the appraisal. It was concluded that the internationalization strategies and resources of companies predicted their location choices, over and above the variables studied in the theoretical field of location determinants.

Implementation of X-ray diffraction in the measurement of residual thermal strains

Microelectronic systems are multi-material, multi-layer structures, fabricated and exposed to environmental stresses over a wide range of temperatures. Thermal and residual stresses created by thermal mismatches in films and interconnections are a major cause of failure in microelectronic devices. Due to new device materials, increasing die size and the introduction of new materials for enhanced thermal management, differences in thermal expansions of various packaging materials have become exceedingly important and can no longer be neglected. X-ray diffraction is an analytical method using a monochromatic characteristic X-ray beam to characterize the crystal structure of various materials, by measuring the distances between planes in atomic crystalline lattice structures. As a material is strained, this interplanar spacing is correspondingly altered, and this microscopic strain is used to determine the macroscopic strain. This thesis investigates and describes the theory and implementation of X-ray diffraction in the measurement of residual thermal strains. The design of a computer controlled stress attachment stage fully compatible with an Anton Paar heat stage will be detailed. The stress determined by the diffraction method will be compared with bimetallic strip theory and finite element models.

Conservação genética da orquídea Cattleya granulosa Lindley

Cattleya granulosa Lind is a large and endemic orchid in Atlantic Forest fragments in Northeast Brazil. The facility of collecting, uniqueness of their flowers, which have varying colors between green and reddish brown, and distribution in coastal areas of economic interest make their populations a constant target of predation, which also suffer from environmental degradation. Due to the impact on their populations, the species is threatened. In this study, we evaluate the levels of spatial aggregation in a preserved population, analyze the phylogenetic relationships of C. granulosa Lindl. with four other Laeliinae species (Brassavola tuberculata, C. bicolor, C. labiata and C. schofieldiana) and also to evaluate the genetic diversity of 12 remaining populations of C. granulosa Lindl. through ISSR. There was specificity of epiphytic C. granula Lindl. with a single host tree, species of Eugenia sp. C. granulosa Lindl. own spatial pattern, with the highest density of neighbors within up to 5 m. Regarding the phylogenetic relationships and genetic patterns with other species of the genus, C. bicolor exhibited the greatest genetic diversity (HE = 0.219), while C. labiata exhibited the lowest level (HE = 0.132). The percentage of genetic variation among species (AMOVA) was 23.26%. The principal component analysis (PCA) of ISSR data showed that unifoliate and bifoliolate species are genetically divergent. PCA indicated a close relationship between C. granulosa Lindl. and C. schofieldiana, a species considered to be a variety of C. granulosa Lindl. by many researchers. Population genetic analysis using ISSR showed all polymorphic loci. The high genetic differentiation between populations (ФST = 0.391, P < 0.0001) determined the structure into nine groups according to log-likelihood of Bayesian analysis, with a similar pattern in the dendrogram (UPGMA) and PCA. A positive and significant correlation between geographic and genetic distances between populations was identified (r = 0.794, P = 0.017), indicating isolation by distance. Patterns of allelic diversity suggest the occurrence of population bottlenecks in most populations of C. granulosa Lindl. (n = 8). Genetic data indicate that enable the maintenance of genetic diversity of the species is complex and is directly related to the conservation of different units or groups that are spatially distant.

A educação básica na região metropolitana de Natal: uma análise da qualidade educativa e sua relação com o contexto familiar dos alunos

This dissertation aimed to investigate the formal learning process of children and teenagers through elementary education and, mainly, the support of family on domestic school activities as a step in the teaching-learning process. The student's family, with its cultural capital, provides an assistance which was the bias of the essay analyzes presented on this paper, using a spatial area of public elementary schools of the municipalities of the Natal metropolitan region. Such frame of Natal metropolis has been justified by the recent review of their basic education, taken by the Brazilian Ministry of Education, diagnosed in 2011, only 1% of students were in a adequate mathematics learning stage. While 62% were considered in a critical stage in this discipline. Given this issue, this dissertation offers a theoretical analysis about inherited and acquired within the family cultural capital, mainly focusing in the distances between the cultural level of the student's family and the defendant by the school. Then, presents the fundamental aspects of the issue on the urban phenomenon, focusing on social hierarchies and structures of city spaces that express differentiation, segmentation and socio-spatial segregation, and social exclusion. The emphasis on inequalities points to the development of an urban ethos, through formal schooling, which develops from social singularities. To theoretically develop the theme of Cultural Capital Family, this study sought to operationalize the concept through the interpretation of the phenomenon studied by a logical validation work hypotheses. The operation concepts systemically transformed into statistical indicators in order to measure the impact of individual, social and cultural characteristics of students elements. Finally, this dissertation found that the components evaluated, family cultural capital and housing conditions, can influence the development of skills and competencies of students in the educational sphere

Estudo da estrutura subsuperficial da província Borborema com correlação de ruído sísmico

Ambient seismic noise has traditionally been considered as an unwanted perturbation in seismic data acquisition that "contaminates" the clean recording of earthquakes. Over the last decade, however, it has been demonstrated that consistent information about the subsurface structure can be extracted from cross-correlation of ambient seismic noise. In this context, the rules are reversed: the ambient seismic noise becomes the desired seismic signal, while earthquakes become the unwanted perturbation that needs to be removed. At periods lower than 30 s, the spectrum of ambient seismic noise is dominated by microseism, which originates from distant atmospheric perturbations over the oceans. The microsseism is the most continuous seismic signal and can be classified as primary – when observed in the range 10-20 s – and secondary – when observed in the range 5-10 s. The Green‘s function of the propagating medium between two receivers (seismic stations) can be reconstructed by cross-correlating seismic noise simultaneously recorded at the receivers. The reconstruction of the Green‘s function is generally proportional to the surface-wave portion of the seismic wavefield, as microsseismic energy travels mostly as surface-waves. In this work, 194 Green‘s functions obtained from stacking of one month of daily cross-correlations of ambient seismic noise recorded in the vertical component of several pairs of broadband seismic stations in Northeast Brazil are presented. The daily cross-correlations were stacked using a timefrequency, phase-weighted scheme that enhances weak coherent signals by reducing incoherent noise. The cross-correlations show that, as expected, the emerged signal is dominated by Rayleigh waves, with dispersion velocities being reliably measured for periods ranging between 5 and 20 s. Both permanent stations from a monitoring seismic network and temporary stations from past passive experiments in the region are considered, resulting in a combined network of 33 stations separated by distances between 60 and 1311 km, approximately. The Rayleigh-wave, dispersion velocity measurements are then used to develop tomographic images of group velocity variation for the Borborema Province of Northeast Brazil. The tomographic maps allow to satisfactorily map buried structural features in the region. At short periods (~5 s) the images reflect shallow crustal structure, clearly delineating intra-continental and marginal sedimentary basins, as well as portions of important shear zones traversing the Borborema Province. At longer periods (10 – 20 s) the images are sensitive to deeper structure in the upper crust, and most of the shallower anomalies fade away. Interestingly, some of them do persist. The deep anomalies do not correlate with either the location of Cenozoic volcanism and uplift - which marked the evolution of the Borborema Province in the Cenozoic - or available maps of surface heat-flow, and the origin of the deep anomalies remains enigmatic.

Estudo da evolução das tensões residuais através da difratometria de raios x em aço rolamento submetido a esforços cíclicos

The micro-deformations caused by cyclic loading origins the variation of the distances between atoms of the crystal lattice producing the irreversible component. In order to study and understand the microstructural behavior of the material this paper investigated the influence suffered by residual stresses in thrust rolling bearing races fabricated in AISI 52100 steel, after tests by cyclic rolling contact in a tribometer at 1m/s under two contact pressures (500 MPa and 1400 MPa) in dry and boundary lubrication conditions. Procedures of tests thermo-acustically isolated were developed for monitoring the contact temperature and sound pressure level signals to establish a comparison between the residual stress measurements, micro-hardness Vickers and micrographic registers searching an indication of wear evolution. The sin²ψ method by X-ray diffraction technique was used to quantify the residual stresses. Three raceway zones were selected for the evaluation of wear and surface morphology after predetermined cycling, comparing with their new condition ("as received"). Micro-hardness and residual stress measurements showed significant changes after the tests and it was possible to observe the relationship between the increase of sound pressure level and the residual stress for dry and lubricated conditions.

Estudo da evolução das tensões residuais através da difratometria de raios x em aço rolamento submetido a esforços cíclicos

The micro-deformations caused by cyclic loading origins the variation of the distances between atoms of the crystal lattice producing the irreversible component. In order to study and understand the microstructural behavior of the material this paper investigated the influence suffered by residual stresses in thrust rolling bearing races fabricated in AISI 52100 steel, after tests by cyclic rolling contact in a tribometer at 1m/s under two contact pressures (500 MPa and 1400 MPa) in dry and boundary lubrication conditions. Procedures of tests thermo-acustically isolated were developed for monitoring the contact temperature and sound pressure level signals to establish a comparison between the residual stress measurements, micro-hardness Vickers and micrographic registers searching an indication of wear evolution. The sin²ψ method by X-ray diffraction technique was used to quantify the residual stresses. Three raceway zones were selected for the evaluation of wear and surface morphology after predetermined cycling, comparing with their new condition ("as received"). Micro-hardness and residual stress measurements showed significant changes after the tests and it was possible to observe the relationship between the increase of sound pressure level and the residual stress for dry and lubricated conditions.