Long-term skeletal and dental effects and treatment timing for functional appliances in Class II malocclusion

Objective: To analyze the long-term skeletal and dentoalveolar effects and to evaluate treatment timing of Class II treatment with functional appliances followed by fixed appliances.Materials and Methods: A group of 40 patients (22 females and 18 males) with Class II malocclusion consecutively treated either with a Bionator or an Activator followed by fixed appliances was compared with a control group of 20 subjects (9 females and 11 males) with untreated Class II malocclusion. Lateral cephalograms were available at the start of treatment (mean age 10 years), end of treatment with functional appliances (mean age 12 years), and long-term observation (mean age 18.6 years). The treated sample also was divided into two groups according to skeletal maturity. The early-treatment group was composed of 20 subjects (12 females and 8 males) treated before puberty, while the late-treatment group included 20 subjects (10 females and 10 males) treated at puberty. Statistical comparisons were performed with analysis of variance followed by Tukey's post hoc tests.Results: Significant long-term mandibular changes (Co-Gn) in the treated group (3.6 mm over the controls) were associated with improvements in the skeletal sagittal intermaxillary relationship, overjet, and molar relationship (similar to 3.0-3.5 mm). Treatment during the pubertal peak was able to produce significantly greater increases in total mandibular length (4.3 mm) and mandibular ramus height (3.1 mm) associated with a significant advancement of the bony chin (3.9 mm) when compared with treatment before puberty.Conclusion: Treatment of Class II malocclusion with functional appliances appears to be more effective at puberty. (Angle Orthod. 2013;83:334-340.)

Aplicação clínica da mola T do grupo B para retração dos dentes anteriores

A TAS (Técnica do Arco Segmentado) representa uma alternativa à mecânica de deslizamento, muitas vezes dificultada pela incerteza da quantidade de força de atrito envolvida em cada sistema de forças utilizado. Nesse contexto, sabe-se que poucos cursos de Ortodontia no Brasil têm ensinado efetivamente a filosofia e o modo de trabalhar com a TAS. Portanto, este trabalho procura elucidar a forma de raciocínio das relaçÕes entre força e momento manipuladas na TAS, bem como mostrar a forma de confecção e utilização de mola "T" do grupo B, onde objetiva-se a movimentação recíproca dos segmentos posterior e anterior e, por fim, apresentar um caso clínico tratado com esse tipo de mecânica.

Efeitos de diferentes sistemas de clareamento dental sobre a rugosidade e morfologia superficial do esmalte e de uma resina composta restauradora

The aim of this study was to evaluate and compare the roughness and superficial morphology of enamel and a composite restorative resin after different bleaching techniques application. Material and Methods: Bovine incisors were selected and standardized cavities were prepared on the buccal surface, which were restored with composite resin. The teeth were distributed according to the following treatments: G1- bleaching with 10% carbamide peroxide (CP); G2 - bleaching with 38% hydrogen peroxide (HP); and G3 - bleaching with 38% of HP associated to light irradiation. For G1, the bleaching gel was applied for 8 hours daily during 21 days. For G2 and G3, 3 sessions were performed, consisting of 3 applications of 15 minutes each, with 7 days of intervals between the sessions. For G3, the LED (470nm) light was used to activate the bleaching agent for 6 minutes. The surface of enamel and composite resin were evaluated before and after the bleaching procedures using a roughness tester and an atomic force microscope. Results: The results showed significant differences in surface roughness of enamel after bleaching only for G1 (Wilcoxon, p<0.05). For composite resin, neither group showed a statistical difference compared to control (Mann-Whitney, p>0.05). Conclusion: It was concluded that the increase in the roughness of enamel occurred only after bleaching therapy using a gel with 10% of CP. The bleaching procedures evaluated in this investigation did not increase the roughness or cause changes in the superficial morphology of the composite resin.

Multidisciplinary treatment ofadult patients with Class III malocclusion

This article describes the multidisciplinary treatment of an adult patient presenting with Angle Class III malocclusion, alteration of the mandibular position, vertical alveolar bone loss and absence of teeth in the lower posterior region. With advancing age the existence of occlusal interference due to loss of teeth or tooth structure is very common, resulting in periodontal problems due to occlusal trauma. The options for treatment of Class III malocclusion in adolescent and adult patients include compensatory orthodontic treatment in mild to moderate cases and orthognathic surgery for moderate to severe cases. The combination of various dental specialties enabled improvement in the social circumstances of the patient. This can be observed objectively by the final dental relationship and by the skeletal and tegumentary cephalometric comparison between the situation at the beginning and at the end of the treatment. The compensatory treatment performed permitted the successful correction of a Class III malocclusion in the clinical case presented.

Combined effect of anterior malocclusion and inadequate lip coverage on dental trauma in primary teeth

Objectives: The main objective of this study was to investigate whether the interaction of malocclusion (open bite or increased overjet) combined with inadequate lip coverage strengthens its association with traumatic dental injury (TDI) in the primary teeth of preschool children compared to the presence of malocclusion alone. Subjects and methods: A cross-sectional survey was conducted with 376 children aged 3659 months who attended the National Day of Childrens Vaccination. Presence of TDI, tooth discoloration, and sinus tract were evaluated in the children. Variables associated with occlusion were also evaluated. A Poisson regression analysis was performed to verify the association between the explanatory variables and TDI as well as possible interactions among the variables. Then, the prevalence ratio was calculated. Results: The prevalence of TDI was 27.7%. The maxillary central incisor was the most affected tooth, without differences between the right and left sides. Boys had more dental trauma than girls (P = 0.04). The most common TDI was crown fracture restricted to the enamel (58.4%). Children with a combination of anterior open bite or increased overjet and inadequate lip coverage presented a higher prevalence of TDI than when the malocclusions were presented alone (P < 0.05). The same trends were observed when we included, in the final adjusted model, increased overjet instead of open bite. Conclusions: Anterior malocclusions of primary teeth such as increased overjet and anterior open bite are statistically significantly associated with dental trauma only when inadequate lip coverage is also present.

Craniofacial morphology and sleep apnea in children with obstructed upper airways: Differences between genders

Objective: To correlate sleep apnea with craniofacial characteristics and facial patterns according to gender. Methods: In this prospective survey we studied 77 male and female children (3-12 years old) with an upper airway obstruction due to tonsil and adenoid enlargement. Children with lung problems, neurological disorders and syndromes, obstructive septal deviation, previous orthodontic treatment, orthodontic surgeries or oral surgeries, or obesity were excluded. Patients were subjected to physical examinations, nasal fiberoptic endoscopy, teleradiography for cephalometric analysis, and polysomnography. Methods: Cephalometric analysis included the following skeletal craniofacial measurements: facial axis (FA), facial depth (FD), mandibular plane angle (MP), lower facial height (LFH), mandibular arch (MA), and vertical growth coefficient (VERT) index. Results: The prevalence of sleep apnea was 46.75% with no statistical difference between genders. Among children with obstructive sleep apnea (Apneia Hypopnea Index - AHI >= 1) boys had higher AHI values than girls. A predominance of the dolichofacial pattern (81.9%) was observed. The following skeletal craniofacial measurements correlated with AHI in boys: FD (r(s) = -0.336/p = 0.020), MP (r(s) = 0.486/p = 0.00), and VERT index (r(s) = -0.337/p = 0.019). No correlations between craniofacial measurements and AHI were identified in girls. Conclusions: Craniofacial morphology may influence the severity of sleep apnea in boys but not in girls. (C) 2012 Elsevier B.V. All rights reserved.

Morphology of the nasopalatine canal and dental implant surgery: a radiographic analysis of 100 consecutive patients using limited cone-beam computed tomography

To analyze the dimensions and anatomic characteristics of the nasopalatine canal and the corresponding buccal bone plate of the alveolar process, using limited cone-beam computed tomography (CBCT) imaging.

Inferences regarding the diet of extinct hominins: structural and functional trends in dental and mandibular morphology within the hominin clade

This contribution investigates the evolution of diet in the Pan – Homo and hominin clades. It does this by focusing on 12 variables (nine dental and three mandibular) for which data are available about extant chimpanzees, modern humans and most extinct hominins. Previous analyses of this type have approached the interpretation of dental and gnathic function by focusing on the identification of the food consumed (i.e. fruits, leaves, etc.) rather than on the physical properties (i.e. hardness, toughness, etc.) of those foods, and they have not specifically addressed the role that the physical properties of foods play in determining dental adaptations. We take the available evidence for the 12 variables, and set out what the expression of each of those variables is in extant chimpanzees, the earliest hominins, archaic hominins, megadont archaic hominins, and an inclusive grouping made up of transitional hominins and pre-modern Homo . We then present hypotheses about what the states of these variables would be in the last common ancestor of the Pan – Homo clade and in the stem hominin. We review the physical properties of food and suggest how these physical properties can be used to investigate the functional morphology of the dentition. We show what aspects of anterior tooth morphology are critical for food preparation (e.g. peeling fruit) prior to its ingestion, which features of the postcanine dentition (e.g. overall and relative size of the crowns) are related to the reduction in the particle size of food, and how information about the macrostructure (e.g. enamel thickness) and microstructure (e.g. extent and location of enamel prism decussation) of the enamel cap might be used to make predictions about the types of foods consumed by extinct hominins. Specifically, we show how thick enamel can protect against the generation and propagation of cracks in the enamel that begin at the enamel– dentine junction and move towards the outer enamel surface.

Reproducibility and accuracy of linear measurements on dental models derived from cone-beam computed tomography compared with digital dental casts.

INTRODUCTION The aim of this study was to determine the reproducibility and accuracy of linear measurements on 2 types of dental models derived from cone-beam computed tomography (CBCT) scans: CBCT images, and Anatomodels (InVivoDental, San Jose, Calif); these were compared with digital models generated from dental impressions (Digimodels; Orthoproof, Nieuwegein, The Netherlands). The Digimodels were used as the reference standard. METHODS The 3 types of digital models were made from 10 subjects. Four examiners repeated 37 linear tooth and arch measurements 10 times. Paired t tests and the intraclass correlation coefficient were performed to determine the reproducibility and accuracy of the measurements. RESULTS The CBCT images showed significantly smaller intraclass correlation coefficient values and larger duplicate measurement errors compared with the corresponding values for Digimodels and Anatomodels. The average difference between measurements on CBCT images and Digimodels ranged from -0.4 to 1.65 mm, with limits of agreement values up to 1.3 mm for crown-width measurements. The average difference between Anatomodels and Digimodels ranged from -0.42 to 0.84 mm with limits of agreement values up to 1.65 mm. CONCLUSIONS Statistically significant differences between measurements on Digimodels and Anatomodels, and between Digimodels and CBCT images, were found. Although the mean differences might be clinically acceptable, the random errors were relatively large compared with corresponding measurements reported in the literature for both Anatomodels and CBCT images, and might be clinically important. Therefore, with the CBCT settings used in this study, measurements made directly on CBCT images and Anatomodels are not as accurate as measurements on Digimodels.

The virtual patient in dental medicine

OBJECTIVES The aim of this Short Communication was to present a workflow for the superimposition of intraoral scan (IOS), cone-beam computed tomography (CBCT), and extraoral face scan (EOS) creating a 3D virtual dental patient. MATERIAL AND METHODS As a proof-of-principle, full arch IOS, preoperative CBCT, and mimic EOS were taken and superimposed to a unique 3D data pool. The connecting link between the different files was to detect existing teeth as constant landmarks in all three data sets. RESULTS This novel application technique successfully demonstrated the feasibility of building a craniofacial virtual model by image fusion of IOS, CBCT, and EOS under 3D static conditions. CONCLUSIONS The presented application is the first approach that realized the fusion of intraoral and facial surfaces combined with skeletal anatomy imaging. This novel 3D superimposition technique allowed the simulation of treatment planning, the exploration of the patients' expectations, and the implementation as an effective communication tool. The next step will be the development of a real-time 4D virtual patient in motion.

AVALIAÇÃO DA ESTABILIDADE DAS ALTERAÇÕES PROMOVIDAS PELO APARELHO REGULADOR DE FUNÇÃO FRÄNKEL-2 NOS ARCOS DENTÁRIOS

O objetivo do presente estudo consistiu em analisar a estabilidade das alterações oclusais em 18 pacientes com má oclusão de Classe II, divisão 1, idade média inicial de 10,77 anos, tratados com o aparelho regulador de função RF-2 durante 18 meses e reavaliados num período de pós-tratamento 7,16 anos, em média. Os 54 modelos de gesso foram avaliados no início do tratamento (T1), no final do tratamento (T2) e decorridos 7,16 anos pós-tratamento (T3). Foram analisadas as alterações transversais e sagitais; o Índice de irregularidade de Little e o Índice de Prioridade de Tratamento (IPT). As alterações ocorridas nos períodos analisados foram verificadas por meio da análise de Variância- ANOVA e, em seguida, pelo teste de comparações múltiplas de Bonferroni, com o valor crítico adotado de 0,05. Os resultados demonstraram que o tratamento com o RF-2 promoveu um aumento transversal estatisticamente significante, tanto no arco dentário superior quanto no inferior, porém, no período pós-tratamento, houve recidiva parcial ou mesmo total deste aumento na maioria das dimensões analisadas. Já o comprimento dos arcos dentários superior e inferior diminuiu durante todo o período avaliado. O Índice de Irregularidade de Little apresentou-se estável durante o tratamento, entretanto aumentou no período pós-tratamento. Além disso, o tratamento com o RF-2 proporcionou uma diminuição estatisticamente significante do IPT, refletindo a eficácia do tratamento realizado uma vez que esta diminuição permaneceu estável no período pós-tratamento. Portanto, o aparelho RF-2 demonstrou ser eficaz na correção dentária da má oclusão de Classe II, divisão 1, com estabilidade dos resultados decorridos 7,16 anos após o tratamento. Porém, em relação ao ganho transversal nos arcos dentários obtido durante o tratamento, houve recidiva parcial ou total de todas as variáveis analisadas.(AU)

AVALIAÇÃO DA ESTABILIDADE DAS ALTERAÇÕES PROMOVIDAS PELO APARELHO REGULADOR DE FUNÇÃO FRÄNKEL-2 NOS ARCOS DENTÁRIOS

O objetivo do presente estudo consistiu em analisar a estabilidade das alterações oclusais em 18 pacientes com má oclusão de Classe II, divisão 1, idade média inicial de 10,77 anos, tratados com o aparelho regulador de função RF-2 durante 18 meses e reavaliados num período de pós-tratamento 7,16 anos, em média. Os 54 modelos de gesso foram avaliados no início do tratamento (T1), no final do tratamento (T2) e decorridos 7,16 anos pós-tratamento (T3). Foram analisadas as alterações transversais e sagitais; o Índice de irregularidade de Little e o Índice de Prioridade de Tratamento (IPT). As alterações ocorridas nos períodos analisados foram verificadas por meio da análise de Variância- ANOVA e, em seguida, pelo teste de comparações múltiplas de Bonferroni, com o valor crítico adotado de 0,05. Os resultados demonstraram que o tratamento com o RF-2 promoveu um aumento transversal estatisticamente significante, tanto no arco dentário superior quanto no inferior, porém, no período pós-tratamento, houve recidiva parcial ou mesmo total deste aumento na maioria das dimensões analisadas. Já o comprimento dos arcos dentários superior e inferior diminuiu durante todo o período avaliado. O Índice de Irregularidade de Little apresentou-se estável durante o tratamento, entretanto aumentou no período pós-tratamento. Além disso, o tratamento com o RF-2 proporcionou uma diminuição estatisticamente significante do IPT, refletindo a eficácia do tratamento realizado uma vez que esta diminuição permaneceu estável no período pós-tratamento. Portanto, o aparelho RF-2 demonstrou ser eficaz na correção dentária da má oclusão de Classe II, divisão 1, com estabilidade dos resultados decorridos 7,16 anos após o tratamento. Porém, em relação ao ganho transversal nos arcos dentários obtido durante o tratamento, houve recidiva parcial ou total de todas as variáveis analisadas.(AU)

Dental morphology of the Procyonidae with a description of Cynarctoides, gen. nov. / by Paul O. McGrew --

v.6:no.22(1938)

Inferring parrotfish (Teleostei : Scaridae) pharyngeal mill function from dental morphology, wear, and microstructure

Morphology, occlusal surface topography, macrowear, and microwear features of parrotfish pharyngeal teeth were investigated to relate microstructural characteristics to the function of the pharyngeal mill using scanning electron microscopy of whole and sectioned pharyngeal jaws and teeth. Pharyngeal tooth migration is anterior in the lower jaw (fifth ceratobranchial) and posterior in the upper jaw (paired third pharyngobranchials), making the interaction of occlusal surfaces and wear-generating forces complex. The extent of wear can be used to define three regions through which teeth migrate: a region containing newly erupted teeth showing little or no wear; a midregion in which the apical enameloid is swiftly worn; and a region containing teeth with only basal enameloid remaining, which shows low to moderate wear. The shape of the occlusal surface alters as the teeth progress along the pharyngeal jaw, generating conditions that appear suited to the reduction of coral particles. It is likely that the interaction between these particles and algal cells during the process of the rendering of the former is responsible for the rupture of the latter, with the consequent liberation of cell contents from which parrotfish obtain their nutrients.

Estudo comparativo da determinação do tipo facial por meio de análise cefalométrica e pelo índice morfológico da face

A determinação do tipo facial é importante para o diagnóstico e planejamento ortodôntico, tendo em vista que na atualidade vários protocolos de tratamento utilizam este método para individualizar a terapêutica nos pacientes. O objetivo deste trabalho consistiu em verificar a correlação existente entre o Índice Morfológico da Face e o Vert de Ricketts, entre o Índice Morfológico da Face e o Quociente de Jarabak; também entre o Vert de Ricketts e o Quociente de Jarabak. Outro objetivo foi verificar se há correlação entre o Índice Morfológico da Face, Vert de Ricketts e o Quociente de Jarabak com as grandezas cefalométricas: FMA, Eixo Facial, Sn.GoGn, Sn.Gn e Ar.GoMe. A amostra foi constituída de telerradiografias em norma lateral e de mensurações antopométricas da face de 60 voluntários, sendo 30 do sexo feminino e 30 do sexo masculino. Entre os resultados obtidos observamos correlação entre o Índice Morfológico da Face e o VERT de Ricketts (r = -0,42) e entre o Índice Morfológico da Face e o Quociente de Jarabak (r = -0,32), considerado em ambos os casos como uma fraca correlação negativa. Já na correlação entre o VERT de Ricketts e o Quociente de Jarabak o valor obtido foi de r = 0,61, sendo considerada como uma correlação positiva moderada. Houve uma moderada correlação entre os métodos para determinação dos tipos faciais Índice Morfológico da Face e Quociente de Jarabak com as variáveis cefalométricas. Já para a correlação entre as variáveis cefalométricas e o método para determinação do tipo facial Vert de Ricketts, houve uma forte correlação. Com base nos resultados obtidos concluímos que houve uma concordância fraca entre os métodos Índice Morfológico da Face, Vert de Ricketts e Quociente de Jarabak; e sugerimos que outros estudos devem ser realizados a fim de corroborar com este trabalho para comprovar a aplicabilidade do Índice Antropométrico para a determinação do tipo facial (AU)