Estruturas de correção torrencial nas ribeiras do Funchal, açudes: inventariação e análise comparativa

A presente dissertação tem como propósito a elaboração de um inventário relativo às estruturas de correção torrencial construídas no concelho do Funchal. Na sequência da aluvião do dia 20 de fevereiro de 2010, resultante de um período prolongado de chuva na ilha da Madeira, aliada ao facto desta ter um relevo muito pronunciado e extremamente acidentado, originaram-se os movimentos de vertente que, na sua grande maioria, são responsáveis pela ocorrência de cheias rápidas. Pois as bacias hidrográficas da ilha são de pequena dimensão e consequentemente as suas ribeiras, dão origem a tempos de concentração muito reduzidos. Desta forma, as ribeiras que são alimentadas pelo escoamento líquido e sólido, tornam-se num agente erosivo e potenciam um rasto de destruição. Esta aluvião teve consequências devastadoras em toda a vertente sul da ilha da Madeira, no entanto, este trabalho, focou-se apenas no concelho do Funchal, no qual existem três ribeiras onde foram implantadas as estruturas de correção torrencial, designadas por açudes, que constituem o âmago deste estudo, através da inventariação destas estruturas e posterior elaboração de uma ficha de inventário relativa a cada uma delas. Inicialmente, procedeu-se à identificação de todos os açudes, à verificação e análise das condições dos locais intervencionados, além de um levantamento fotográfico para execução posterior de um enquadramento geográfico dos mesmos. Foram abordadas algumas considerações de caráter hidrológico, hidráulico e transporte de caudal sólido, que são a base dimensional e a razão da execução dos referidos açudes. Numa fase posterior, foi elaborada uma base de dados com a informação disponível dos vários açudes identificados, munida de valor ímpar para futuros desenvolvimentos nesta área no curso de engenharia civil na Universidade da Madeira. Por fim, são expostas algumas considerações relativamente aos diferentes modelos de estruturas de correção torrencial encontrados na pouca bibliografia especializada e implantados no terreno.

Análise da viabilidade da aplicação do aço inoxidável na Ilha da Madeira

A grande maioria das estruturas existentes atualmente contém aço na sua constituição, seja na forma de aço estrutural, seja na forma de armaduras de betão armado. A deterioração precoce do aço destas estruturas é um fenómeno muito comum e que tem acarretado grandes custos em reabilitações e reparações. O principal fator para essa deterioração precoce é o contacto de agentes agressivos, como os cloretos, com o aço que originam a sua corrosão. Na Ilha da Madeira alguns desses agentes agressivos estão presentes em grandes quantidades, promovendo a súbita corrosão do aço, fazendo com que os custos de manutenção sejam elevados. Uma das formas de evitar a corrosão do aço é através da utilização do aço inoxidável reduzindo assim os custos com manutenções ao longo da sua vida útil. Nesta dissertação pretende-se avaliar se a utilização do aço inoxidável em vez do aço carbono na Ilha da Madeira é economicamente mais vantajosa a longo prazo. Para esse fim foram elaboradas diversas tarefas. Numa fase inicial foi realizada uma análise comparativa entre o aço carbono e o aço inoxidável em termos de propriedades gerais, comportamento mecânico e regulamentação, mas também uma pesquisa sobre as aplicações e os tipos de aço inoxidável. Numa fase seguinte foram abordados mecanismos de degradação e métodos de reparação para a corrosão. Para além disso, foram determinados os tempos de vida útil de projeto, através de modelos de degradação, e estimados cenários de degradação e manutenção. Posteriormente foram dimensionados dois tipos de estruturas (betão armado e estrutura metálica) e para dois tipos de aço (aço carbono e aço inoxidável) por forma a determinar o peso dos materiais das estruturas para apurar o seu custo. Em seguida foram realizadas as análises económicas das estruturas mencionadas anteriormente face aos cenários de manutenção anteriormente realizados. As análises recaíram sobre os custos inicias das estruturas e os custos a longo prazo, para um período de vida útil de 50 anos. Em função da análise realizada pode concluir-se que na Ilha da Madeira a utilização do aço inoxidável nas estruturas metálicas, por enquanto, não é vantajosa em termos económicos. Para as estruturas de betão armado, verificou-se também que na maioria dos casos a utilização do aço carbono é a melhor opção económica a longo prazo, exceto nas estruturas perto do mar com cimentos do tipo CEM I ou CEM II/A, em que o aço inoxidável é a melhor opção, pois embora este apresente um custo inicial superior ao do aço carbono, o seu custo total a longo prazo incluindo as reparações é inferior.

Efeitos da dieta hipoprotéica na formação e composição de estruturas dentárias. Estudo Experimental em ratos wistar

Protein and caloric malnutrition has been considered one of the most concerned endemic diseases in Brazil and in the world. It has been known that depletion or reduction of proteins as far as meals are concerned can steer irreversible damages upon several organic systems. This study had as aim evaluate the effects the low-protein diet had over the formation and composition of the teeth components. 18 females and 6 males were used for the experiment. 12 from the 18 females had undertaken the low-protein diet (DH) for 03 weeks and the other 6, which remained, and those males had undertaken a controlled diet (DC) for the same period. All animals had the diets during their mating, pregnancy and lactation cycle. As soon as the offsprings had been born, 10 young males and females of each group faced a disease hood analysis to check the teeth germs of their lower fore teeth. The rest of the group had their lactation cycle normally 60 days. Then they were put to death and had their lower fore teeth removed both to be analyzed through a scanning electronic microscopy (SEM) of the structure alterations and to have their calcium checked by an atomic absorption of the phosphorus vanadate-molibdate method and by other minerals EDX method. The animals livers were removed to have their hepatic proteins analyzed as well. The histopatologic study showed that at first day of birth, all animals had their lower fore teeth come out. It was verified that 90% of the animals teeth were in an apposition and calcification period and it was possible to observe the dentin formation from 60% of the 90% already mentioned. Through the SEM method it could be realized that 90% of the animals of the DH group had their lower fore teeth easily broken and no definite shape. In this same group itself, it was also observed long micro fissures 369,66 nm ± 3,45 while the DC group had fissures of 174 nm ± 5,72. Now regarding the calcium and phosphorus concentration, it could be noticed that there was a great reduction of these components and other minerals in the DH group. Almost all minerals, except for the Cl and K, presented higher levels in the DC group enamel.The reduction of the protein input greatly influenced the offsprings´ weight and height. However the hepatic proteins had no important difference between the groups what can make one believe that those animals suffered from protein malnutrition of marasmic kind

Estruturas cerâmicas a base de zircônia e alumina utilizadas na confecção de infra - estruturas para coroas e pontes fixas

The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic

Análise gráfica de estruturas porosas sobre a ótica da estereologia

In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.

Simulação computacional de medidas estereológicas em estruturas de metal duro (WC-Co)

This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.

Crescimento e estruturas do sistema digestório de larvas de pacu alimentadas com dieta microencapsulada produzida experimentalmente

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dimensionamento e sobreposição de nichos dos portunídeos (Decapoda, Brachyura), na Enseada da Fortaleza, Ubatuba, São Paulo, Brasil

The niche breadth of the Portunidae and their overlap on the subtidal sediments of Fortaleza bay, Ubatuba (São Paulo) was analyzed. Samples were made monthly from November/1988 to October/1989, inseven areas of the bay using a shrimp fishery boat equipped with two otter-trawls. Each area was characterized based on environmental factors such as depth, temperature, salinity, dissolved oxygen, organic matter and granulometric composition of the sediment. The number of individuais of each species was registered to each area (resource). Levins's standardized measure (BA) and niche percentage were calculated. Five species of swimming crabs were recorded in this study: Callinectes ornatus Ordway, 1863, Arenaeus cribrarius (Lamarck, 1818), Portunus spinimanus Latreille, 1819, Callinectes danae Smith, 1869 and Portunus spinicarpus (Stimpson, 1871). The widest ecological niche occurred to C. ornatus, present in all sampled areas (generalist species). Such fact can be related to high sediment tolerance when it is compared to P. spinimanus (especialist species) which was limited to the areas with coarse granulometric fractions. Highest niche overlap was verified between C. danae and A. cribrarius may be due to greater salinity tolerance of these species. The low occurrence of P. spinicarpus and its reduced niche size in Fortaleza Bay are due to association of this species to cold water currents (ACAS) more evidente in smaler depths during summer months. One future evaluation of the portunid diet can be useful to complement informations about this important aspect of the marine ecology.

Dimensionamento de amostras para monitoramento do ácaro da leprose Brevipalpus phoenicis (Geijskes, 1939) em citros

O controle do ácaro Brevipalpus phoenicis (Geijskes, 1939), transmissor do vírus da leprose, deve ser realizado quando sua população atinge o nível de ação, obtido pelo monitoramento de sua população, por meio de amostragens. Objetivou-se determinar o tamanho da amostra aceitável para estimar a população do ácaro, para posterior tomada de decisão. O experimento foi realizado na Fazenda Cambuhy, Matão - SP, no ano agrícola 2003-2004. Escolheu-se ao acaso um talhão da variedade Valência, com oito anos de idade, plantada no espaçamento 7x3,5m, com 2.480 plantas. Nesse talhão, foram inspecionados 1; 2; 3; 5; 10 e 100% das plantas, o que corresponde a 25; 50; 74; 124; 248 e 2.480 plantas, respectivamente, em caminhamento no sentido das linhas de plantio. Foram amostrados 3 frutos ou, na ausência destes, eram analisados ramos. de acordo com os resultados obtidos, observa-se que a porcentagem de erro na estimativa da média para a porcentagem de frutos com presença de ácaros, quando se amostra apenas 1% das plantas (25 plantas), é de 50%, ou seja, para uma infestação de 10%, a variação da porcentagem de frutos infestados estaria entre 5 e 15%, levando o produtor a subestimar ou a superestimar o nível de infestação, aumentando os gastos com pulverizações desnecessárias ou um controle ineficiente do ácaro. Para que o erro na amostragem fique dentro da situação aceitável, de 20 a 30% (em média 25%) de erro, deveriam ser amostradas 105 plantas. Na porcentagem de frutos com mais de 10 ácaros, verifica-se que, para a situação aceitável (20 a 30%), devem ser inspecionadas 540 plantas.

Paradigma constitucional brasileiro da livre concorrência e da defesa do consumidor face às estruturas de poder no mercado

The Federal Constitution of 1988, when taking care of the economical order, denotes special concern in the abuses of the economical power and the disloyal competition. The mark to mediate of all this is, in fact, the defense and the consumer's protection, once this is final addressee of whatever if it puts at the consumption market. The coming of the Law 8.078/90, Code of Protection and Defense of the Consumer, inaugurates a time of effective concern with the homogeneous individual interests originating from of the consumption relationships. In this point, the focus of main to face of the present work lives, in other words, the protection of the right to the individual property, especially manifests in the exercise of the trade freedom that keeps direct relationship with the respective social function the one that is destined. The code of the consumer's defense doesn't just take care of this, but also of the other star of the relationships of the consumption. When affirming in the interruption VI of the art. 4th that the national politics of those relationships, finds ballast in the prohibition and repression efficient of all of the abuses committed in the consumption relationships, keeping inherent relationship-causality in the economical order, sculpted for the article 170 in the Constitution of 1988. In the generic plan, the mark of the present work is to question concerning the limits of the trade freedom and previsible collisions with protection norms and the consumer's defense, as well as factual convergences of those small systems, especially in what he/she refers to the innate interests to the suppliers. In the specific plan, we aspirated to identify the protection device-commands to the actors of the trade relationship, capable to guarantee the free competition in a global economy of market, seeking especially the Well-being, for soon afterwards, in an analytical perspective, to discover the possible applications that it holds the Federal Constitution, in headquarters of economical freedoms. It was observed that the consumer today doesn't need only of laws that their needs, fruit of the vulnerability that it is him/her meditate innate. He/she lacks, yes, of effective mechanisms that prevent lesions that can be them impinged by the suppliers at the time in that you/they are useful to repair the damages when happened, punishing the author of the damage

Caracterização ultrassonográfica das estruturas flexoras musculotendíneas e ligamentares da porção distal dos membros de novilhas cruzadas

Caracterizaram-se, por meio da ultrassonografia, as estruturas flexoras da porção distal dos membros de bovinos utilizando-se peças anatômicas da porção distal dos membros torácicos e pélvicos, provenientes de 20 novilhas mestiças da raça Nelore, com idades entre 24 e 36 meses. Para análise ultrassonográfica, foram estabelecidas cinco zonas de avaliação no plano transversal, denominadas, respectivamente, de zonas A, B, C, D e E, e duas em plano sagital, F-III e F-IV. Na face flexora, foram avaliados os tendões flexores digitais superficial e profundo, o músculo interósseo, o ligamento acessório do tendão flexor digital profundo e a manica flexoria, quanto à forma, limites, posição, ecogenicidade e mensurações das áreas transversais em cm². Sendo os resultados apresentados na forma descritiva e em tabelas, foi possível a caracterização das estruturas flexoras, identificando e determinando planos ultrassonográficos apropriados para a observação de imagens adequadas destes tecidos, além da obtenção de valores e parâmetros que possam ser utilizados como referência para esta espécie.

Parâmetros de dimensionamento para biodigestores batelada operados com dejetos de vacas leiteiras com e sem uso de inóculo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelagem numérica de estruturas de contenção atirantadas em areia

A numerical study on the behavior of tied-back retaining walls in sand, using the finite element method (FEM) is presented. The analyses were performed using the software Plaxis 2D, and were focused on the development of horizontal displacements, horizontal stresses, shear forces and bending moments in the structure during the construction process. Emphasis was placed on the evaluation of wall embedment, tie-back horizontal spacing, wall thickness, and free anchor length on wall behavior. A representative soil profile of a specific region at the City of Natal, Brazil, was used in the numerical analyses. New facilities built on this region often include retaining structures of the same type studied herein. Soil behavior was modeled using the Mohr-Coulomb constitutive model, whereas the structural elements were modeled using the linear elastic model. Shear strength parameters of the soil layers were obtained from direct shear test results conducted with samples collected at the studied site. Deformation parameters were obtained from empirical correlations from SPT test results carried out on the studied site. The results of the numerical analyses revealed that the effect of wall embedment on the investigated parameters is virtually negligible. Conversely, the tie-back horizontal spacing plays an important role on the investigated parameters. The results also demonstrated that the wall thickness significantly affects the wall horizontal displacements, and the shear forces and bending moments within the retaining structure. However, wall thickness was not found to influence horizontal stresses in the structure

Análise de estruturas de superfície delgadas axissimétricas via método dos elementos finitos com utilização de elemento retilíneo

The present work deals with the linear analysis of bi-dimensional axisymmetric structures, through development and implementation of a Finite Element Method code. The structures are initially studied alone and afterwards compatibilized into coupled structures, that is, assemblages, including tanks and pressure vessels. Examples are analysed and, in order to prove accuracy, the results were compared with those furnished by the analytical solutions

Subsídios para o projeto de estruturas sismo resistentes

Through this research is detailed the Brazilian seismic code focused on concrete projects design related to seismic engineering. At the beginning of the research is debated the fundaments of the seismic effects, the influence factors to the development of seismic effects and also relates the main data registration happened in Brazil. The second step is study the Brazilian seismic code explaining all the concepts related to it and does a compilation to the most important international seismic code. At this research is developed the designing of a building submitted to horizontal equivalent seismic forces and the modal process based on the answer spectrum based on the brazilin seismic code. It was also developed the design of a commercial building submitted to seismic loads based on the Brazilian code answer spectrum and compared to the same building submitted to wind loads.The research also focus on projects conception and detailing of seismic engineering Project design. At the study of seismic engineering it was concluded that seismic effects require special focus on concrete structures design, proving that is the essential consider the seismic effects