Effects of cotton cultivars differing in gossypol content on the quality of Aphis gossypii as prey for two species of Coccinellidae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects on soil chemical attributes and cotton yield from ammonium sulfate and cover crops

Fertilizer use in no-till systems must be aligned with a correct interpretation of soil chemical attributes and crop demands. The objectives of this work were evaluate the effects of pre-sowing application of ammonium sulfate (AS) and of cover crops on the yields and soil chemical attributes of no-till cotton (Gossypium hirsutum L. r. latifolium Hutch) over two harvesting years. The experiment was arranged in randomized complete block design, with the plots in strips, and the variables were three cover crops (Raphanus sativus L., Avena strigosa L. and Avena sativa L.) and four AS doses (0, 150, 300, and 450 kg ha-1) applied over millet dry biomass. The cotton in the experimental plots was manually harvested on April 25, 2007 and April 24, 2008. The soil samples were collected between cotton rows in all plots on May 5, 2007 and May 12, 2008, at depths of 0.0-0.05, 0.05-0.10, and 0.10-0.20 m for soil fertility analyses. The increasing doses of AS induced lower soil pH, and calcium (Ca) and magnesium (Mg) levels in the superficial soil layer, as well as higher exchangeable aluminum (Al) and sulfur (S) levels until a depth of 0.20 m. Seed cotton yields increased with increasing AS doses.

Genotoxic potential of the latex from cotton-leaf physicnut (Jatropha gossypiifolia L.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cotton yield and fiber quality affected by row spacing and shading at different growth stages

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cotton leaf gas exchange responses to irradiance and leaf aging

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Understanding the genesis of green supply chain management: lessons from leading Brazilian companies

This work discusses the internal structuring processes of leading companies when adopting green supply chain management (GSCM) practices. A multiple case study approach was adopted as the research methodology, with four large Brazilian companies that are leaders in their market segments. The introduction of green products is a key step towards initiating concern for the environment among suppliers and customers. This study's results show the importance of having green teams, a dedicated functional area, and/or green jobs that support the discussion of environmental management among a business and beyond. The practical results of this study offer new insights into the behavior of companies that are adopting GSCM practices, thereby generating new evidence for the extension of GSCM theory. (C) 2014 Elsevier Ltd. All rights reserved.

Transgenic cotton-fed Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) affects the parasitoid encarsia desantisi Viggiani (Hymenoptera: Aphelinidae) development

Cotton cultivars expressing Cry proteins are widely used to control lepidopteran pests. The effects of transgenic plants containing insecticidal Cry proteins on non-target species must be comprehended for a better and rational use of this technology for pest management. We investigated the influence of the Bt cotton cultivars NuOPAL and FM 975 on biological parameters of Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae), a non-target pest of Bt cotton cultivars and on its parasitoid Encarsia desantisi Viggiani (Hymenoptera: Aphelinidae). The experiments were conducted in a climatized room, and the non-transgenic near isolines were used for rearing whiteflies as control hosts. The effects of the Bt cotton cultivars on the period of embryonic and larval development and the percentage of adult emergence of B. tabaci were assessed. The period required for embryonic, larval, and pupal development and the percentage of emergence and longevity of E. desantisi females were determined using Bt cotton-fed and non-Bt cotton-fed B. tabaci as hosts. Both Bt cotton cultivars resulted in a decrease of approximately 20% of adult emergence of B. tabaci. Differently, an increase of approximately 10% of adult emergence of E. desantisi was observed for parasitoids that used hosts fed with both Bt cotton cultivars. However, female parasitoid longevity decreased when their hosts were fed on Bt cotton cultivars. Our data suggest that the use of Bt cotton cultivars in association with the biological control agent E. desantisi could be functional for the management of B. tabaci in Bt cotton crops.

Behavior of Orius insidiosus preying on Aphis gossypii reared on transgenic and conventional cotton varieties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Greening a Brazilian cotton seed processing company: from challenges to strategic opportunities

This paper aims to shed light on a current and important theme that has been gaining increasing importance for governments, society and companies: the greening of agricultural companies in developing countries. The research objective is to classify a Brazilian cotton seed processing company in the evolutionary stages of environmental management: reactive, preventive or proactive. Design/methodology/approach– A case study was conducted in a Brazilian cotton seed processing company.Findings– The main results are: the studied company is positioned in the preventive stage of environmental management; this company is investing in operational green practices; environmental management in this company is motivated by various factors aiming at an increased competitive advantage. Finally, it can be concluded that this company is looking for green opportunities towards the proactive environmental management stage.

Nitrogen immobilization by Congo grass roots impairs cotton initial growth

In crop-livestock integration systems the presence of both grass roots in the soil and straw on the surface can temporarily immobilize nitrogen. This study examined the persistence of grass residues in the system as well as their effects on cotton response to N when grown after Congo grass (Brachiaria ruziziensis, Syn. Urochloa ruziziensis). Congo grass was grown in pots with soil. Next, cotton was grown in the same pots without residues, with whole plant residues (Congo grass roots and shoots) or root residues (grass roots) and fertilized with N as ammonium nitrate. Congo grass and cotton roots were separated using stable carbon isotope fractioning. Congo grass roots showed higher C/N ratio than shoots, losing 14% of its mass after 45 days and increasing soil N immobilization. The lower N availability resulted in N deficient and shorter cotton plants with lower dry matter yields. Nevertheless, the application of 80 to 120 mg kg-1 of N compensated the immobilization by the soil microorganisms, allowing cotton to show normal growth. When Congo grass is present in the cropping system, the effects of the decaying roots on soil N dynamics and availability are more important than those of the straw left on the soil surface.

The Ultraviolet Protection Factor of Naturally-pigmented Cotton

Textile Technology: The sun-blocking properties of a textile are enhanced when a dye, pigment, delustrant, or ultraviolet absorber finish is present that absorbs ultraviolet radiation and blocks its transmission through a fabric to the skin. For this reason, dyed fabrics provide better sun protection than bleached fabrics. Since naturally-colored cottons contain pigments that produce shades ranging from light green to tan and brown, it seemed reasonable to postulate that they would provide better sun protection than conventional bleached cotton, and that natural pigments might prove more durable to laundering and light exposure than dyes, but there is no published research on the ultraviolet transmission values for naturally-pigmented cottons. The purpose of this study was to determine the ultraviolet protection (UPF) values of naturally-pigmented cotton in three shades (green, tan, and brown), and the effect of light exposure and laundering on the sun-blocking properties of naturally-pigmented cotton. Naturally-pigmented cotton specimens were exposed to xenon light and accelerated laundering, ultraviolet transmission values measured, and UPF values calculated following light exposure and laundering. The naturally-pigmented cottons exhibited significantly higher UPF values than conventional cotton (bleached or unbleached). Although xenon light exposure and laundering caused some fading, the UPF values of naturally-pigmented cotton continue to be sufficiently high so that all three shades continue to provide good sun protection after the equivalent of 5 home launderings and 80 American Association of Textile Chemists and Colorists fading units (AFUs) of xenon light exposure.

LYOCELL AND COTTON FIBERS AS REINFORCEMENTS FOR A THERMOSET POLYMER

Cellulose fibers obtained from the textile industry (lyocell) were investigated as a potential reinforcement for thermoset phenolic matrices, to improve their mechanical properties. Textile cotton fibers were also considered. The fibers were characterized in terms of their chemical composition and analyzed using TGA, SEM, and X-ray. The thermoset (non-reinforced) and composites (phenolic matrices reinforced with randomly dispersed fibers) were characterized using TG, DSC, SEM, DMTA, the Izod impact strength test, and water absorption capacity analysis. The composites that were reinforced with lyocell fibers exhibited impact strengths of nearly 240 Jm(-1), whereas those reinforced with cotton fibers exhibited impact strengths of up to 773 Jm(-1). In addition to the aspect ratio, the higher crystallinity of cotton fibers compared to lyocell likely plays a role in the impact strength of the composite reinforced by the fibers. The SEM images showed that the porosity of the textile fibers allowed good bulk diffusion of the phenolic resin, which, in turn, led to both good adhesion of fiber to matrix and fewer microvoids at the interface.

Mapping and Quantification of the Cotton Chain in Brazil

The CHAINPlan method developed by Neves (2007) is a practical tool which can be used to construct strategic plans for production chains. A preliminary step in this process includes mapping and quantifying the production chain. We present the results of applying the method to one of the most important agribusiness chains in Brazil-the cotton sector. The Gross Domestic Product for the cotton sector in the 2010-2011 crop year was estimated at nearly $19.2 billion. We show the interconnections between the links in the chain and its ability to generate revenues, taxes and jobs.

New constraints on the genesis and long-term stability of Os-rich alloys in the Earth's mantle

A variety of seemingly unrelated processes, such as core-mantle interaction, desulfurization, and direct precipitation from a silicate melt have been proposed to explain the formation of Ru-Os-Ir alloys (here referred to as osmiridiums) found in terrestrial mantle rocks. However, no consensus has yet been reached on how these important micrometer-sized phases form. In this paper we report the results of an experimental study on the solubilities of Ru, Os and Ir in sulfide melts (or mattes) as a function of alloy composition at 1300 degrees C. Considering the low solubilities of Ru, Os, and Ir in silicate melts, coupled with their high matte/silicate-melt partition coefficients, our results indicate that these elements concentrate initially at the ppm level in a matte phase in the mantle source region. During partial melting, the extraction of sulfur into silicate melt leads to a decrease in fS(2) that triggers the exsolution of osmiridiums from the refractory matte in the residue. The newly formed osmiridiums may persist in the terrestrial mantle for periods exceeding billions of years. (C) 2012 Elsevier Ltd. All rights reserved.

Processes Mapping in Cotton Culture to Traceability Creation

Traceability is a concept that arose from the need for monitoring of production processes, this concept is usually used in sectors related to food production or activities involving some kind of direct risk to people. Agribusiness in the cotton industry does not have a comprehensive infrastructure for all stages of the processes involved in production. Map and define the data to enable traceability of products is synonymous to delegate responsibilities for all involved in the production, the collection of aggregate data on cotton production is done in stages and specific pre-defined since the choice of the variety through the processing, the scope of this article specifically addresses the production of lint cotton. The paper presents a proposal based on service oriented architecture (SOA) for data integration processes in the cotton industry, this proposal provide support for the implementation of platform independent solutions.