Surface wave techniques for the study of engineering structures and materials

A wire drive pulse echo method of measuring the spectrum of solid bodies described. Using an 's' plane representation, a general analysis of the transient response of such solids has been carried out. This was used for the study of the stepped amplitude transient of high order modes of disks and for the case where there are two adjacent resonant frequencies. The techniques developed have been applied to the measurenent of the elasticities of refractory materials at high temperatures. In the experimental study of the high order in-plane resonances of thin disks it was found that the energy travelled at the edge of the disk and this initiated the work on one dimensional Rayleigh waves.Their properties were established for the straight edge condition by following an analysis similar to that of the two dimensional case. Experiments were then carried out on the velocity dispersion of various circuits including the disk and a hole in a large plate - the negative curvature condition.Theoretical analysis established the phase and group velocities for these cases and experimental tests on aluminium and glass gave good agreement with theory. At high frequencies all velocities approach that of the one dimensional Rayleigh waves. When applied to crack detection it was observed that a signal burst travelling round a disk showed an anomalous amplitude effect. In certain cases the signal which travelled the greater distance had the greater amplitude.An experiment was designed to investigate the phenanenon and it was established that the energy travelled in two nodes with different velocities.It was found by analysis that as well as the Rayleigh surface wave on the edge, a seoond node travelling at about the shear velocity was excited and the calculated results gave reasonable agreement with the experiments.

Logics, thresholds, strategic power, and the promotion of liberalisation by governments: a case study from British Higher Education

Liberalisation has become an increasingly important policy trend, both in the private and public sectors of advanced industrial economies. This article eschews deterministic accounts of liberalisation by considering why government attempts to institute competition may be successful in some cases and not others. It considers the relative strength of explanations focusing on the institutional context, and on the volume and power of sectoral actors supporting liberalisation. These approaches are applied to two attempts to liberalise, one successful and one unsuccessful, within one sector in one nation – higher education in Britain. Each explanation is seen to have some explanatory power, but none is sufficient to explain why competition was generalised in the one case and not the other. The article counsels the need for scholars of liberalisation to be open to multiple explanations which may require the marshalling of multiple sources and types of evidence.

Breaking down barriers:teenage girls’ perceptions of engineering as a study and career choice

Background: Stereotypically perceived to be an ‘all male’ occupation, engineering has for many years failed to attract high numbers of young women [1,2]. The reasons for this are varied, but tend to focus on misconceptions of the profession as being more suitable for men. In seeking to investigate this issue a participatory research approach was adopted [3] in which two 17 year-old female high school students interviewed twenty high school girls. Questions focused on the girls’ perceptions of engineering as a study and career choice. The findings were recorded and analysed using qualitative techniques. The study identified three distinctive ‘influences’ as being pivotal to girls’ perceptions of engineering; pedagogical; social; and, familial. Pedagogical Influences: Pedagogical influences tended to focus on science and maths. In discussing science, the majority of the girls identified biology and chemistry as more ‘realistic’ whilst physics was perceived to more suitable for boys. The personality of the teacher, and how a particular subject is taught, proved to be important influences shaping opinions. Social Influences: Societal influences were reflected in the girls’ career choice with the majority considering medical or social science related careers. Although all of the girls believed engineering to be ‘male dominated’, none believed that a woman should not be engineer. Familial Influences: Parental influence was identified as key to career and study choice; only two of the girls had discussed engineering with their parents of which only one was being actively encouraged to pursue a career in engineering. Discussion: The study found that one of the most significant barriers to engineering is a lack of awareness. Engineering did not register in the girls’ lives, it was not taught in school, and only one had met a female engineer. Building on the study findings, the discussion considers how engineering could be made more attractive to young women. Whilst misconceptions about what an engineer is need to be addressed, other more fundamental pedagogical barriers, such as the need to make physics more attractive to girls and the need to develop the curriculum so as to meet the learning needs of 21st Century students are discussed. By drawing attention to the issues around gender and the barriers to engineering, this paper contributes to current debates in this area – in doing so it provides food for thought about policy and practice in engineering and engineering education.

A bridge too far? Breaching the research/learning and teaching nexus in a previously research-led university

The relationship between research and learning and teaching represents what has been described as ‘amongst the most intellectually tangled, managerially complex and politically contentious issues in mass higher education’ (Scott, 2005, p 53). Despite this, arguments that in order to achieve high quality scholarly outcomes, university teachers need to adopt an approach to teaching similar to that of research (i.e. founded upon academic rigour and evidence), has long been discussed in the literature (see for example, Elton, 2005 & Healey, 2000). However, the practicalities of promoting an empirical and evidence-based approach to teaching within a research-led institution makes dealing with the research/learning and teaching nexus a somewhat challenging proposition. Drawing upon the findings of a mixed methodological study, this paper critically analyses the pedagogical, organisational and practical issues encountered by academics and support staff working within a newly established Centre for Learning Innovation and Professional Practice. Comprising an eclectic group of staff drawn from across the five Schools in the University, the Centre is dedicated to enhancing student learning through the development of evidence based teaching practice. Based upon the premise that the promotion of research-led teaching will act to bring teaching and research together, and in doing so enhance students learning experiences (Simmons & Elen 2007), the paper critically analyses the challenges encountered by staff responsible for developing and introducing a new learning & teaching focused organisational strategy (by reflecting on the previous 12 months work). In doing so it makes a significant contribution to current academic theory and debate in the areas of pedagogic practice and organisational management. Focusing specifically on the impact of the new policy on various aspects of university life including, pedagogic practice, student support, staff training, and organisational management, the paper critically addresses the cultural and attitudinal challenges of change management (Kotter, 1996) within a ‘grey-brick’ university. It concludes by arguing that the move towards becoming a more learning-focused university has started to develop an awareness of the positive impact the change initiative is having on the student experience and wider institution; whilst also drawing attention to the organisational challenges ahead.

Postgraduate study and managers' subsequent work experience:an exploratory evaluation

Drawing on an exploratory qualitative study, this article considers the link between business school teaching at graduate level and subsequent work behaviour and experiences of former students. It evaluates the student experience some time after graduation. The findings of the retrospective evaluation point to the value of classroom peer discussion, the testing of ideas against prior work experience and the opportunity to make sense of organisational issues by setting them into broader context. The importance of andragogical approaches to teaching is discussed as well as the implications of the study findings for teaching quality enhancement. © 2009 Taylor & Francis.

Distance Learning Education of Software Engineering: Principles and Experiences

Whether distance learning spells the end of traditional campuses, as some maintain, or whether distance learning instead represents a powerful addition to a growing array of delivery options for higher education, its impact on higher education is great and growing. Distance learning is creating alternative models of teaching and learning, new job descriptions for faculty, and new types of higher education providers. The advent of Distance and Distributed Learning has raised numerous questions about quality and quality assurance: ² How do established distance learning institutions ensure quality? ² What more needs to be done? ² How do quality assurance agencies view the distinction between on- and off-campus teaching and learning? This talk discusses these issues from the viewpoints of funding organisa- tion, quality assurance agencies and the learners.

French linguistics research and teaching in UK and Irish HE institutions

Introduction: The research and teaching of French linguistics in UK higher education (HE) institutions have a venerable history; a number of universities have traditionally offered philology or history of the language courses, which complement literary study. A deeper understanding of the way that the phonology, syntax and semantics of the French language have evolved gives students linguistic insights that dovetail with their study of the Roman de Renart, Rabelais, Racine or the nouveau roman. There was, in the past, some coverage of contemporary French phonetics but little on sociolinguistic issues. More recently, new areas of research and teaching have been developed, with a particular focus on contemporary spoken French and on sociolinguistics. Well supported by funding councils, UK researchers are also making an important contribution in other areas: phonetics and phonology, syntax, pragmatics and second-language acquisition. A fair proportion of French linguistics research occurs outside French sections in psychology or applied linguistics departments. In addition, the UK plays a particular role in bringing together European and North American intellectual traditions and methodologies and in promoting the internationalisation of French linguistics research through the strength of its subject associations, and that of the Journal of French Language Studies. The following sections treat each of these areas in turn. History of the French Language There is a long and distinguished tradition in Britain of teaching and research on the history of the French language, particularly, but by no means exclusively, at the universities of Cambridge, Manchester and Oxford.

Convergence and translation: attitudes to inter-professional learning and teaching of creative problem-solving among medical and engineering students and staff

Background: Healthcare worldwide needs translation of basic ideas from engineering into the clinic. Consequently, there is increasing demand for graduates equipped with the knowledge and skills to apply interdisciplinary medicine/engineering approaches to the development of novel solutions for healthcare. The literature provides little guidance regarding barriers to, and facilitators of, effective interdisciplinary learning for engineering and medical students in a team-based project context. Methods: A quantitative survey was distributed to engineering and medical students and staff in two universities, one in Ireland and one in Belgium, to chart knowledge and practice in interdisciplinary learning and teaching, and of the teaching of innovation. Results: We report important differences for staff and students between the disciplines regarding attitudes towards, and perceptions of, the relevance of interdisciplinary learning opportunities, and the role of creativity and innovation. There was agreement across groups concerning preferred learning, instructional styles, and module content. Medical students showed greater resistance to the use of structured creativity tools and interdisciplinary teams. Conclusions: The results of this international survey will help to define the optimal learning conditions under which undergraduate engineering and medicine students can learn to consider the diverse factors which determine the success or failure of a healthcare engineering solution.

An Investigation into the Use of Computer-based Simulation Games for Learning and Teaching in Business Management Courses

Computer-based simulation games (CSG) are a form of innovation in learning and teaching. CGS are used more pervasively in various ways such as a class activity (formative exercises) and as part of summative assessments (Leemkuil and De Jong, 2012; Zantow et al., 2005). This study investigates the current and potential use of CGS in Worcester Business School’s (WBS) Business Management undergraduate programmes. The initial survey of off-the-shelf simulation reveals that there are various categories of simulations, with each offering varying levels of complexity and learning opportunities depending on the field of study. The findings suggest that whilst there is marginal adoption of the use CSG in learning and teaching, there is significant opportunity to increase the use of CSG in enhancing learning and learner achievement, especially in Level 5 modules. The use of CSG is situational and its adoption should be undertaken on a case-by-case basis. WBS can play a major role by creating an environment that encourages and supports the use of CSG as well as other forms of innovative learning and teaching methods. Thus the key recommendation involves providing module teams further support in embedding and integrating CSG into their modules.

Software engineering: methods, modeling and teaching

Since the emergence of software engineering in the late 1960's as a response to the software crisis, researchers throughout the world are trying to give theoretical support to this discipline. Several points of view have to be reviewed in order to complete this task. In the middle 70's Frederick Brooks Jr. coined the term "silver bullet" suggesting the solution to several problems rela-ted to software engineering and, hence, we adopted such a metaphor as a symbol for this book. Methods, modeling, and teaching are the insights reviewed in this book. Some work related to these topies is presented by software engineering researchers, led by Ivar Jacobson, one of the most remarkable researchers in this area. We hope our work will contribute to advance in giving the theoretieal support that software engineering needs.

Actas da II International Conference «Learning and Teaching in Higher Education/ Learning Orchestration in Higher Education»

É ponto assente que o desenvolvimento social e económico de um país depende do conhecimento e do nível educativo dos seus cidadãos. Num momento de crise económica profunda em que a sustentabilidade do ensino superior se encontra ameaçada e a sua organização com rumo incerto, importa, mais do que nunca, criar um espaço de reflexão em que a ciência se pronuncie, aproximando e colocando em evidência os contributos que em vários domínios se vão produzindo. Nesta conferência, que se pretende em continuidade com a realizada em 2010, elegemos como tema central a qualidade do ensino e da aprendizagem e, tendo em conta a realidade em que nos inscrevemos, alargamos a discussão aos contextos e aos modelos de organização que os podem consubstanciar. Pode parecer um paradoxo centrar esta conferência na componente mais pedagógica do ensino superior quando toda a pressão de avaliação interna e externa das instituições e dos docentes incide particularmente sobre a produção científica. Mas talvez não. Assumimos que a reflexão de cariz pedagógico continua a não ser uma prática corrente no meio universitário português que, durante gerações, se habituou a um ensino universitário tradicional destinado apenas a uma pequena elite e se alheou dos desafios da massificação de que foi alvo. A ideia de que pedagogia apenas diz respeito à relação do professor com crianças ou jovens até ao ensino secundário permaneceu latente, tornando estéril qualquer discussão que, na perspectiva de alguns, seria desnecessária e até contraproducente no ensino superior. Um novo paradigma terá de ser assumido por um ensino universitário que busca o ideal da excelência, colocando no centro do debate o equilíbrio entre as dimensões pedagógica e investigativa e uma redobrada atenção à sociedade e às mudanças se, verdadeiramente, o que pretendemos é ganhar o desafio da qualidade.

Practical assessment on the run – iPads as an effective mobile and paperless tool in physical education and teaching

This paper investigates the use of iPads in the assessment of predominantly second year Bachelor of Education (Primary/Early Childhood) pre-service teachers undertaking a physical education and health unit. Within this unit, practical assessment tasks are graded by tutors in a variety of indoor and outdoor settings. The main barriers for the lecturer or tutor for effective assessment in these contexts include limited time to assess and the provision of explicit feedback for large numbers of students, complex assessment procedures, overwhelming record-keeping and assessing students without distracting from the performance being presented. The purpose of this pilot study was to investigate whether incorporating mobile technologies such as iPads to access online rubrics within the Blackboard environment would enhance and simplify the assessment process. Results from the findings indicate that using iPads to access online rubrics was successful in streamlining the assessment process because it provided pre-service teachers with immediate and explicit feedback. In addition, tutors experienced a reduction in the amount of time required for the same workload by allowing quicker forms of feedback via the iPad dictation function. These outcomes have future implications and potential for mobile paperless assessment in other disciplines such as health, environmental science and engineering.

Triple objective team mentoring: achieving learning objectives with chemical engineering students

A sophisticated style of mentoring has been found to be essential to support engineering student teams undertaking technically demanding, real-world problems as part of a Project-Centred Curriculum (PCC) at The University of Queensland. The term ‘triple-objective’ mentoring was coined to define mentoring that addresses not only the student’s technical goal achievement but also their time and team management. This is achieved through a number of formal mentor meetings that are informed by a confidential instrument which requires students to individually reflect on team processes prior to the meeting, and a checklist of technical requirements against which the interim student team progress and achievements are assessed. Triple-objective mentoring requires significant time input and coordination by the academic but has been shown to ensure effective student team work and learning undiminished by team dysfunction. Student feedback shows they value the process and agree that the tools developed to support the process are effective in developing and assessing team work and skills with average scores mostly above 3 on a four point scale.