Efeito dos reguladores de crescimento vegetal nas características agronômicas do algodoeiro e no controle de insetos

The experiment was carried out in 1993/94, in Jaboticabal, São Paulo State, Brazil, to verify the efficiency of plant growth regulators on agronomic characteristics of cotton and as pest control technique. The experimental design was a complete randomized block with four replications and seven treatments: 1) control; 2) ethephon + cyclanilide (720 + 90 g/ha a.i.); 3) ethephon + cyclanilide (960 + 120 g/ha a.i.); 4) ethephon + cyclanilide (1200 + 150 g/ha a.i.); 5) ethephon (960 g/ha a.i.); 6) ethephon (1200 g/ha a.i.) and 7) cyclanilide 150 g/ha a.i.). Results suggest that plant growth regulators can reduce harvest time in 15 days, contributing significantly to decreased late-season squares and immature bolls that serve as feeding and oviposition sites to boll weevils and pink bollworm.

Estudos hídricos com substratos vegetais para cultivo de orquídeas epífitas

Different growing media were compared as to water adsorption and water loss, at Jaboticabal, SP, Brazil, through a three-year period. The objective was to recommend substrates other than tree fern fiber for cultivation of epiphytic orchids. Two treatments of each substrate were used in each sampling: materials stored in laboratory (without use) and materials exposed to conditions of orchid cultivation under laths (used). Generally, the substrates without use adsorbed less water than used substrates. When materials without use were compared, the tree fern fiber retained initially the greatest quantity of water and the blocks of pressed coconut bark, the smallest. However, these blocks gained a great capacity of water adsorption after being used. Charcoal added to the growing media did not cause significant alterations in the studied characteristics. In terms of water relations, the best growing media to substitute the tree fern fiber were composed by blocks of pressed coconut bark or by mixtures of this material with charcoal or Eucalyptus grandis bark. Bark of E grandis alone or in mixture with charcoal did not give good results.

Utilização do cloreto de clorocolina no controle do bicudo-do-algodoeiro

The objective of the present work was to evaluate the effect of the growth regulator chlorocholine chloride (CCC) in the control of the boll weevil (Anthonomus grandis Boheman) on cotton ( Gossypium hirsutum L. ). The experiment was conducted at the Experimental Farm of the Faculdade de Ciências Agrárias e Veterinárias (UNESP), Jaboticabal Campus, State of São Paulo, Brazil, during the 1988/1989 growing season. The experimental design used was the latin square. The chlorocholine chloride was sprayed on the cv IAC-19 cotton plants 70 days after emergence in the doses of 0, 25, 50, and 100 g/ha in a single application as well as 25 g/ha + 25 g/ha in two applications. The second application was 15 days after the first. There was no significant differences on cotton yield. Although the split application as well as the single application of 25 g/ha increased yield in 11.6% and 11.5%, respectively.These same treatments also increased earliness. After the last hand harvest the number of immature cotton bolls left in the field was 64.5% lower in the plots treated with chlorocholine chloride. Despite the higher earliness and the reduction of the number of immature cotton bolls, the chlorocholine chloride treatments were not sufficient to induce an effective aid in the boll weevil control but indicates a possibility of using growth regulators in the cotton crop as an auxilary strategy in integrate pest management programs.

Cytogenetic analysis of seven species of Eucalyptus L'Hér. (Myrtaceae)

Seven species of the genus Eucalyptus were studied cytogenetically (E. deanei, E. dunni, E. grandis, E. maculata E. propinqua, E. saligna and E. tereticornis). The species showed a symmetrical karyotype with 2n=22 chromosomes, with chromosome length ranging from 0.58 μm to 1.39 μm. Karyotypic analysis indicated homogeneity of morphology and of chromosome number for most of the species of this genus studied here, although casual disploid species with 2n=24 have been found in previous studies. According to these data, a basic number of x=11 was established for this genus. The evolutionary tendency probably occurred by structural alterations (deletions, duplications, additions and translocations) and in some cases by aneuploid chromosome alterations.

Growth of Dendrobium nobile Lindl. as related with nutrient concentration in the growing media

Dendrobium nobile orchids were grown for three years in different substrates (tree fern fiber, blocks of pressed coconut bark, bark of Eucalyptus grandis, mixtures with coconut bark blocks and eucalyptus bark and mixtures with the latter materials and charcoal. Plant growth increased with higher concentrations of S (up to 1.6 g/kg), Cu (up to 46 mg/kg) and Zn (up to 147 mg/kg), and decreased with higher concentrations of Ca (up to 13.2 g/kg), Mg (up to 6.6 g/kg) and B (up to 19 mg/kg). High Mo (up to 5.3 mg/kg) caused a more intense loss of leaves after planting. Relations between nutrient concentrations also affected plant growth. With exception of eucalyptus bark, all growing media under study were suitable for plant growth.

Paternity study of an interspecific natural hybrid of the genus Eucalyptus L'Hér (Myrtaceae) based on cytogenetic data

Three species of the genus Eucalyptus (E. dunni, E. grandis, E. saligna) and interspecific hybrid were studied cytogenetically. The Eucalyptus species and the hybrid showed a symmetrical karyotype with 2n=22 chromosomes, with chromosome length ranging from 0.67 to 1.39 μm. Karyotypic analysis indicated a homogenous morphology and chromosome number for the species and the hybrid studied here. Based on the karyotype asymmetry data, together with the chromosome morphology results, the hybrid presented close similarity to E. saligna, suggesting that the latter is one of the parental species involved in the production of the hybrid.

Faixas de controle de plantas daninhas e seus reflexos no crescimento de plantas de eucalipto

Two field trial were conducted in Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S.T. Blake crops at Três Lagoas, Mato Grosso do Sul State and Brotas, São Paulo State, Brazil, to evaluate the effects of weed control in strip of different width on the Eucalyptus plant growth. The experiments consisted of two groups treatments: group 1 - with constant width control strips being kept during the first 12 months, i.e., at 0, 25, 50, 100, 125 and 150cm on each side of the Eucalyptus row and, group 2: with increasing width control strips being adopted along the experimental period, i.e., at 25 to 150, 25-50-150, 50 to 150, 50-125-150, 100-125-150, 100 tot 150 and 125 to 150 cm on each side of the Eucalyptus row during the first 12 months. At 49 moths after planting it was verified that the Eucalyptus plants that had grown both in the constant and increasing width control strips, equal to or higher than 100 and 50 cm, respectively, showed higher steam diameter, plant height, volume and annual increment average of wood. These results led to the conclusion that the minimum control strip width should be 100 cm on each side of the Eucalyptus row in order to keep the crop free of weed interference.

Uso de biossólido como substrate para produção de mudas de eucalipto

The objective of this study was to evaluate the feasibility of the biosolids used as substrate component for seedlings production of Eucalyptus. This way, different proportions of biosolid/carbonized rice (80/20, 70/30, 60/40, 50/05 and 40/60) were tested as substrates in mixture, which were compared to the common substrate used by forest nursery (Multiplant®), as control. The experiment was established with Eucalyptus grandis where growth seedlings-related parameters were assessed: shoot height, collar diameter, accumulation of dry matter on the shoot and root, chemical analysis of the vegetal tissue of aerial part and root, foliar area and chlorophyll content. The results revealed that Eucalypts seedlings developed in substrate with 50% biosolid were similar to the control in relation to the evaluated parameters, concluding that the use of biosolids for seedlings production is quite promising.

Avaliação da distribuição da densidade em MDF a partir da técnica da onda de ultra-som

The goal of this research was to determine the density distribution in medium density fiberboard (MDF), manufactured with polyurethane derived from castor oil using, ultrasonic wave technique. The equipment used in this test is Steinkamp BP7 with plan and exponential transducers, both with 45 kHz frequencies, located in several zones on the plate in order to determine wave ultrasonic velocity. The Pinus caribaea and Eucalyptus grandis fiberboard were manufactured in the quality control and products development laboratory of Duratex with 500 mm long, 500 mm large, 8 and 15 mm of thickness. Three MDF for each fiber specimen and thickness were fabricated, totalizing twelve plates tested. The MDF were produced with 5% polyurethane addition, in temperature of 160°C, tension press of 53 bars and addition of moisture content of 12%. For determination of fiberboard density, samples were extracted from the same zones where the wave ultrasonic velocity was determined. In this case, DAX-Ray equipment was used. Statistical analysis shows good agreement with wave ultrasonic velocity and the density profile, validating the application of non-destructive technique in order to determine the density profile of MDF's.

Desenvolvimentos da biopolpação no Brasil

Biopulping is a technology which application can be advantageous to mechanical or chemical pulping. It presents benefits such as the creation of stronger pulp, as well as energy or chemicals savings. This paper gives an overview of the recent efforts to develop biopulping processes in Brazil as well as provides critical information on biopulping development worldwide. Eucalyptus grandis wood chips have been biotreated by Ceriporiopsis subvermispora in a 50-ton biopulping pilot-plant and used to produce TMP and CTMP pulps on a mill scale, Up to 18% and 27% energy savings have been observed for producing 450-470 CSFreeness TMP and CTMP pulps. Despite darker bio-TMP pulps are produced, one-stage bleaching with 5% H2O2 was sufficient to improve brightness values to 70% and 72% for bio-TMP and control pulps, respectively. Understanding biopulping mechanisms is also relevant because more resistant and competitive fungal species could be selected with basis on a function-directed screen-ing project. As far as the chemical changes induced by the fungus in wood are concerned, recent efforts have pointed out for two different types of wood transformations. One of them involves intense lignin depolymerization in short biotreatment periods, while the other indicates that esterification reactions of oxalate secreted by the Jungas on the polysaccharides chains increase the water saturation point of the fibers. Both transformations are expected to affect the fiber-fiber bonding and, consequently, the physical resistance of wood.

Eficiência de uso de boro no crescimento de clones de eucalipto em vasos

This paper evaluated the critical level, responsivity and boron use effciency on growth and the biomass production in six Eucalyptus grandis x Eucalyptus urophylla clones (Ca, Cb, Cc, Cd, Ce and Cf). An experiment was carried out in pots containing ground silicon, under greenhouse conditions using four boron rates per solution (0; 0.135; 0.27; 0.54 mg L -1 of B). The treatments were combined in a randomized block experimental design in a 4 × 6 factorial scheme with three replications. Plant height, stem diameter, dry matter production in the shoots of the plant and boron use effciency in the leaves, stem and total dry matter at the 8th month of age were evaluated. Due to boron fertilization, growth and shoot biomass were observed in the Eucalyptus plants after 240 days of being planted in pots. The increases in growth and biomass were 35 to 54% and 21 to 64%, respectively. The boron rates that promoted major growth of the plants were 0.33 to 0.44 mg L -1 of B and in this range the most effcient clone for dry matter production of leaves was Cf and the least effcient one to stem biomass production and the shoot biomass was Cd, no signifcant differences among other clones were observed. The critical level of boron in solution was 0.09 to 0.24 mg L -1 of B in the growth of the plants.

Osteologia craniana de Nyctibiidae (Aves, Caprimulgiformes)

The Potoos form an exclusively neotropical family of nocturnal birds distributed throughout Central and South America, except Chile, and reaching their highest diversity in the Amazon region. The seven currently recognized species are certainly among the most poorly known birds of this region. They are characterized by a distinctive mimicry of vegetal trunks, where they remain almost motionless during daytime. For this reason, their nocturnal and cryptic habits make them exceedingly difficult to study. Published accounts on behavior and natural history of the family are scarce and contributions regarding its anatomy are rare. Here we sample six of the seven currently recognized species of Nyctibiidae, including Nyctibius grandis, N. aethereus, N. griseus, N. jamaicensis, N. leucopterus and N. bracteatus, in order to conduct a detailed and illustrated description of the skull and jaw osteology. High interspecific variation in skull osteology was observed in the family. Species of this family possess a highly modified skull, adapted to their life habits, which shelters their well developed eyes and permits a large mouth opening. The bones that form the palate structure exhibit a dorsoventral flattening, particularly in the pterigoid and parasphenoid bones, with the palatine bone being a broadly developed, wing-shaped structure. In the maxilar region, near the jugal arch, there is a tooth-like projection, unique among birds, which may assist in the retention of prey upon capture. The vomer bone is highly variable within the family, showing varying numbers of rostral projections amongst species. The broad occipital region exhibits large spacing between the quadrate bones, which are vertically disposed and possess a reduced processus orbitalis. The mandible, which is flexible and elastic, has an extremely short symphyseal region and sindesmotic joints in both mandibular rami. As a family, potoos possess a highly specialized skull which provides insight into the relationship between the form of the structures and the feeding habits of the species. Furthermore, the large interspecific variation in skull morphology emphasizes the needs for taxonomic revision within the family, which at present is lumped into a single genus.

Análise de crescimento em clones de eucalipto submetidos a estresse hídrico

The aim of this study was to evaluate Eucaliptus grandis genotypes (Clones 105 and 433) in relation to drought tolerance, through growth plant analysis. Black PVC pots with 10 liter volume were used for cultivate plants in polyethilene greenhouse oriented east/west. Completely randonmized design with four treatments was used: two clones and two minimum soil water potentials (- 0.03 and -1,5 MPa) and sixteen replicates. Pots were weighed daily in order to evaluate water content and characteristic soli water curve was determined. Plant development was obtained each 15 days from planting until 60 days through total dry matter (DM), leaf area index (LAI), leaf area ratio (LAR), net assimilative ratio (NAR), specific leaf area (SLA), relative growth ratio (RGR) and absolute growth ratio (AGR). Results showed that clone 105 presented less sensibility to water deficit, which qualify it as genetic material for use under dry soil conditons. On the other hand, both clones had similar behavior with no water restrictions.

Portable Hardness tester for timber classification

Hardness is a property largely used in material specifications, mechanical and metallurgical research and quality control of several materials. Specifically for timber, Janka hardness is a simple, quick and easy test, with good correlations with the compression parallel to grain strength, a strong reference in structural classification for this material. More recently, international studies have reported the use of Brinell hardness for timber assessment which resumes the advantages previously mentioned for Janka hardness and make it easier to be performed in the field, especially because of the lower magnitude of the involved loads. A first generation of an equipment for field evaluation of hardness in wood - Portable Hardness tester for wood - based on Brinell hardness has already been developed by the Research Group on Forest Products from FCA/UNESP, Brazil, with very good correlations between the evaluated hardness and several other mechanical properties of the material when performing tests with different species of native and reforested wood (traditionally used as ties - sleepers - in railways). This paper presents results obtained in the experimental program with the first generation of this equipment and preliminary tests with its second generation, which uses accelerometers to substitute the indentation measurements in wood. For the first generation of the equipment functional and calibration tests were carried out using 16 native and reforestation timber lots, among there E. citriodora, E. tereticornis, E. saligna, E. urophylla, E. grandis, Goupia glabra and Bagassa guianenses, with different origins and ages. The results obtained confirm its potential in the classification of specimens, with inclusion errors varying from 4.5% to 16.6%.

Crescimento inicial do eucalipto em função da aclimatação em viveiro

This study aimed to evaluate the acclimatization effects in the Eucalyptus grandis vs. Eucalyptus urophylla seedlings nursery in their initial growth in two soils types, clay and sandy. The seedlings were planted in Plantmax substrate and in rice hulls plus vermiculite, and managed, after 60 days of the mass propagation (DAE), during the rustication. There were five different frequencies of subsurface drip irrigation, restoring the soil field capacity condition: F1, F2, F3 and F4, which were irrigated once, twice, three and four times a day, respectively, and FD, kept in continue irrigation until planting at 90 DAE. In a randomized block design with four replications, plant height (HPA) were evaluated at 6 and 13 months after planting and the diameter at breast height (DAP) at 13 months after planting. Findings show that water management at hardening phase seedlings had no influence on growth in both soils.