The magnetic field of a current carrying cosmic string

The magnetostatic field of an infinite rectilinear current placed in the stationary gravitational field of a rotating cosmic string is found. An interesting aspect of this problem is that although the metric is mathematically very simple, its physical meaning is not trivial. It depends only on topological parameters. So, the cosmic string vacuum space-time is locally equivalent to the Minkowski space-time, but not globally. The calculations are so simple that they can easily be shown in the classroom. © 1997 American Association of Physics Teachers.

Electromyographic analysis of the pectoralis major and deltoideus anterior muscles in horizontal flyer exercises with loads

The effective activity of the pectoralis major and deltoideus anterior muscles in horizontal flyer exercises with external loads of 25, 50, 75 and 100% of the maximum load was studied in 11 male volunteers. The electromyographic analysis was done by using MEDI-TRACE-200 surface electrodes connected to a biological signal acquisition mode coupled to a PC/AT computer. The electromyographic signals were processed and the values obtained were normalized through maximum voluntary isometric contraction. It was statistically observed that in all types and loads of this exercise, the muscles presented significant differences in the concentric and eccentric phases. In the concentric phase, when different loads were compared, the muscles were more active with 75 and 100% of the maximum load, while in the eccentric phase, higher activity was observed with 100% of the maximum load. By analyzing each load effect in the concentric phase, it was verified that the muscles on the left side were more active than those on the right side with 25, 75 and 100% of the maximum load.

Corrosion behavior in graphite refractories impregnated with ZrO 2 and CeO 2 carrying solutions

This paper investigates corrosion behavior in graphite refractory hot metal impregnated with ZrO 2 and CeO 2 carrying solutions used in Blast Furnace hearth, consisting of 50% graphite and 50% anthracite. Corrosions tests were carried out by means of finger test method in an induction furnace, using bar-shaped 30×30×280 mm test specimens and hot metal from CSN#2 Blast Furnace runner. The temperature chosen for this test was 1520°C and sixty-minute isotherm. Upon test completion, test specimens were characterized by their dimensional variation, X-ray diffractometry and Scanning Electronic Microscopy (SEM).

Electromyographic validation of the pectoralis major and deltoideus anterior muscles in inverted fyling exercises with loads

Inverted flying exercise with external loads of 25, 50, 75 and 100% of each individual maximum load in the pectoralis major and deltoideus anterior muscles was electromyographically analyzed in eleven male volunteers, using surface electrodes MEDI-TRACE-200 connected to a biological signals acquisition module coupled to a PC/AT computer. Electromyographic signals were processed and the effective values obtained were standardized through maximum voluntary isometric contraction. When the concentric phase of each muscle with the same load was statistically compared with the eccentric phase, it was observed that for all loads all the muscles presented significant electromyographic difference, and that the concentric phase was always higher. By analyzing the different loads for each muscle, it was noticed that in the concentric phase all the muscles presented significant electromyographic activity, being it higher with maximum load. When the effect of each load on different muscle in the concentric and eccentric phases was analyzed, the muscles presented a distinct activity profile.

Method for estimating railroad track settlements due to dynamic traffic loads

This paper is the result of real-scale physical modeling study designed to simulate the load-deformation characteristics of railroad foundation systems that include the railroad ties, the ballast, and the sub-base layers of a railroad embankment. The study presents comparisons of the application of dynamic loads of 100kN on the rails, and the resulting deformations during a 500,000 cycle testing period for three rail support systems; wood, concrete and steel. The results show that the deformation curve has an exponential shape, with the larger portion of the deformation occurring during the first 50,000 load cycles followed by a tendency to stabilize between 100,000 to 500,000 cycles. These results indicate that the critical phase of deformations of a new railroad is within the first 50,000 cycles of loading, and after that, it slowly attenuates as it approaches a stable value. The paper also presents empirically derived formulations for the estimation of the deformations of the rail supports as a result of rail traffic.

Carrying capacity in agriculture: Environmental significance and some related patents

Agriculture is one of the most important and possibly the oldest economic activity developed by humans. This activity was developed extensively and is becoming more and more dependent on development of technologies. The goal of this manuscript was examining some patents related to technologies developed for improving crop yields. Such patents are mainly related to more efficient formulations of agrochemicals and management techniques of plants, cattle and natural resources. A brief comment is carried out about bioprospection and related problems, relating, for example the case of Cupuaçu. The article is concluded mentioning that the development of policies and management strategies that increase agricultural yield and simultaneously preserve or conserve natural resources should also be prioritized, because certainly this is the only way we have to get the real sustainability and to improve life quality abroad the world.

Induction pegylated interferon Alfa-2a and high dose ribavirin do not increase SVR in heavy patients with HCV genotype 1 and high viral loads

Background & Aims Patients infected with hepatitis C virus (HCV) genotype 1, body weight <85 kg, and high baseline viral load respond poorly to standard doses of pegylated interferon (peginterferon) and ribavirin. We evaluated intensified therapy with peginterferon alfa-2a plus ribavirin. Methods This double-blind randomized trial included HCV genotype 1-infected outpatients from hepatology clinics with body weight <85 kg and HCV RNA titer <400,000 IU/mL. Patients were randomized to 180 μg/wk peginterferon alfa-2a for 48 weeks plus 1200 mg/day ribavirin (standard of care) (group A, n = 191) or 1400/1600 mg/day ribavirin (group B, n = 189). Additional groups included 360 μg/wk peginterferon alfa-2a for 12 weeks then 180 μg/wk peginterferon alfa-2a for 36 weeks plus 1200 mg/day ribavirin (group C, n = 382) or 1400/1600 mg/day ribavirin (group D, n = 383). Follow-up lasted 24 weeks after treatment. Results Sustained virologic response rates (HCV RNA level <15 IU/mL at end of follow-up) in groups A, B, C, and D were 38%, 43%, 44%, and 41%, respectively. There were no significant differences among the 4 groups or between pooled peginterferon alfa-2a regimens (A + B vs C + D: odds ratio [OR], 1.08; 95% confidence interval [CI], 0.831.39; P = .584) or pooled ribavirin regimens (A + C vs B + D: OR, 1.00; 95% CI, 0.791.28; P = .974). Conclusions In patients infected with HCV genotype 1 who are difficult to treat (high viral load, body weight <85 kg), a 12-week induction regimen of peginterferon alfa-2a and/or higher-dose ribavirin is not more effective than the standard regimen. © 2010 AGA Institute.

Effect of axial loads on implant-supported partial fixed prostheses by strain gauge analysis

Objectives: The present study used strain gauge analysis to perform an in vitro evaluation of the effect of axial loading on 3 elements of implant-supported partial fixed prostheses, varying the type of prosthetic cylinder and the loading points. Material and methods: Three internal hexagon implants were linearly embedded in a polyurethane block. Microunit abutments were connected to the implants applying a torque of 20 Ncm, and prefabricated Co-Cr cylinders and plastic prosthetic cylinders were screwed onto the abutments, which received standard patterns cast in Co-Cr alloy (n = 5). Four strain gauges (SG) were bonded onto the surface of the block tangentially to the implants, SG 01 mesially to implant 1, SG 02 and SG 03 mesially and distally to implant 2, respectively, and SG 04 distally to implant 3. Each metallic structure was screwed onto the abutments with a 10 Ncm torque and an axial load of 30 kg was applied at five predetermined points (A, B, C, D, E). The data obtained from the strain gauge analyses were analyzed statistically by RM ANOVA and Tukey's test, with a level of significance of p<0.05. Results: There was a significant difference for the loading point (p=0.0001), with point B generating the smallest microdeformation (239.49 με) and point D the highest (442.77 με). No significant difference was found for the cylinder type (p=0.748). Conclusions: It was concluded that the type of cylinder did not affect in the magnitude of microdeformation, but the axial loading location influenced this magnitude.

Bronchopneumonia in wild boar (Sus scrofa) caused by Rhodococcus equi carrying the VapB type 8 plasmid

Background: Rhodococcus equi is associated with pyogranulomatous infections, especially in foals, and this bacterium has also emerged as a pathogen for humans, particularly immunocompromised patients. R. equi infections in pigs, wild boar (Sus scrofa) and humans are mainly due to strains carrying the intermediate virulence (VapB) plasmid. In Brazil, R. equi carrying the VapB type 8 plasmid is the most common type recovered from humans co-infected with the human immunodeficiency virus (HIV). R. equi infection in pigs and wild boar is restricted predominantly to the lymphatic system, without any reports of pulmonary manifestations. Findings. This report describes the microbiological and histopathological findings, and molecular characterization of R. equi in two bronchopneumonia cases in wild boar using PCR and plasmid profile analysis by digestion with restriction endonucleases. The histological findings were suggestive of pyogranulomatous infection, and the plasmid profile of both R. equi isolates enabled the characterization of the strains as VapB type 8. Conclusions: This is the first report of bronchopneumonia in wild boar due to R. equi. The detection of the VapB type 8 plasmid in R. equi isolates emphasize that wild boar may be a potential source of pathogenic R. equi strains for humans. © 2013 de Vargas et al.; licensee BioMed Central Ltd.

Interleukin 4 haplotypes of susceptibility to chronic periodontitis are associated with IL-4 protein levels but not with clinical outcomes of periodontal therapy

Different IL4 haplotypes were associated to susceptibility to/or protection against chronic periodontitis (CP). The aim of this study was to investigate if individuals carrying different haplotypes would present differences in clinical periodontal parameters and in the IL-4 levels at baseline, 45 and 90 days after non-surgical periodontal therapy. 62 patients were subdivided: genetically protected without CP (PH), genetically protected with CP (PCP), genetically susceptible with CP (SCP), genetically susceptible without CP (healthy) (SH). Clinical examination and gingival crevicular fluid (GCF) collection were performed for all patients, and IL-4 levels were measured by ELISA. At baseline, higher values for plaque index (PI, p = 0.013), gingival index (GI, p = 0.005) were observed for the SCP group in comparison to the PCP group but not after the completion of periodontal therapy. 45 and 90 days after the non-surgical therapy, PCP demonstrated significantly higher IL-4 levels than the SCP (p = 0.000002). Correlation analysis showed different results between clinical parameters and IL-4 production or GCF volume for groups with different genetic loads. The IL4 gene which was previously associated with susceptibility to CP was related with differences in the IL-4 protein levels in the GCF. However, independent of genetic carriage, individuals responded similarly to this therapy. © 2013 American Society for Histocompatibility and Immunogenetics.

Aspectos ergonômicos e sintomas músculo - esqueléticos em descarregadores de caminhão de melancia no Ceasa de Bauru: um estudo de caso

Pós-graduação em Design - FAAC

Localização de faltas em alimentadores de distribuição de energia elétrica usando medições esparsas de tensões

Pós-graduação em Engenharia Elétrica - FEIS