Look before you leap : a confidence-based method for selecting species criticality while avoiding negative populations in τ-leaping

The stochastic simulation algorithm was introduced by Gillespie and in a different form by Kurtz. There have been many attempts at accelerating the algorithm without deviating from the behavior of the simulated system. The crux of the explicit τ-leaping procedure is the use of Poisson random variables to approximate the number of occurrences of each type of reaction event during a carefully selected time period, τ. This method is acceptable providing the leap condition, that no propensity function changes “significantly” during any time-step, is met. Using this method there is a possibility that species numbers can, artificially, become negative. Several recent papers have demonstrated methods that avoid this situation. One such method classifies, as critical, those reactions in danger of sending species populations negative. At most, one of these critical reactions is allowed to occur in the next time-step. We argue that the criticality of a reactant species and its dependent reaction channels should be related to the probability of the species number becoming negative. This way only reactions that, if fired, produce a high probability of driving a reactant population negative are labeled critical. The number of firings of more reaction channels can be approximated using Poisson random variables thus speeding up the simulation while maintaining the accuracy. In implementing this revised method of criticality selection we make use of the probability distribution from which the random variable describing the change in species number is drawn. We give several numerical examples to demonstrate the effectiveness of our new method.

Stochastic regularization method for backward Cauchy problem in Banach spaces

We consider a stochastic regularization method for solving the backward Cauchy problem in Banach spaces. An order of convergence is obtained on sourcewise representative elements.

Analysis of rural activity spaces and transport disadvantage using a multi-method approach

Current knowledge about the relationship between transport disadvantage and activity space size is limited to urban areas, and as a result, very little is known about this link in a rural context. In addition, although research has identified transport disadvantaged groups based on their size of activity space, these studies have, however, not empirically explained such differences and the result is often a poor identification of the problems facing disadvantaged groups. Research has shown that transport disadvantage varies over time. The static nature of analysis using the activity space concept in previous research studies has lacked the ability to identify transport disadvantage in time. Activity space is a dynamic concept; and therefore possesses a great potential in capturing temporal variations in behaviour and access opportunities. This research derives measures of the size and fullness of activity spaces for 157 individuals for weekdays, weekends, and for a week using weekly activity-travel diary data from three case study areas located in rural Northern Ireland. Four focus groups were also conducted in order to triangulate quantitative findings and to explain the differences between different socio-spatial groups. The findings of this research show that despite having a smaller sized activity space, individuals were not disadvantaged because they were able to access their required activities locally. Car-ownership was found to be an important life line in rural areas. Temporal disaggregation of the data reveals that this is true only on weekends due to a lack of public transport services. In addition, despite activity spaces being at a similar size, the fullness of activity spaces of low-income individuals was found to be significantly lower compared to their high-income counterparts. Focus group data shows that financial constraint, poor connections both between public transport services and between transport routes and opportunities forced individuals to participate in activities located along the main transport corridors.

Adaptive wing/aerofoil design optimisation using MOEA coupled to uncertainty design method

The use of adaptive wing/aerofoil designs is being considered as promising techniques in aeronautic/aerospace since they can reduce aircraft emissions, improve aerodynamic performance of manned or unmanned aircraft. The paper investigates the robust design and optimisation for one type of adaptive techniques; Active Flow Control (AFC) bump at transonic flow conditions on a Natural Laminar Flow (NLF) aerofoil designed to increase aerodynamic efficiency (especially high lift to drag ratio). The concept of using Shock Control Bump (SCB) is to control supersonic flow on the suction/pressure side of NLF aerofoil: RAE 5243 that leads to delaying shock occurrence or weakening its strength. Such AFC technique reduces total drag at transonic speeds due to reduction of wave drag. The location of Boundary Layer Transition (BLT) can influence the position the supersonic shock occurrence. The BLT position is an uncertainty in aerodynamic design due to the many factors, such as surface contamination or surface erosion. The paper studies the SCB shape design optimisation using robust Evolutionary Algorithms (EAs) with uncertainty in BLT positions. The optimisation method is based on a canonical evolution strategy and incorporates the concepts of hierarchical topology, parallel computing and asynchronous evaluation. Two test cases are conducted; the first test assumes the BLT is at 45% of chord from the leading edge and the second test considers robust design optimisation for SCB at the variability of BLT positions and lift coefficient. Numerical result shows that the optimisation method coupled to uncertainty design techniques produces Pareto optimal SCB shapes which have low sensitivity and high aerodynamic performance while having significant total drag reduction.

An accessible method for teaching doctors about death certification

The World Health Organization recommends that data on mortality in its member countries are collected utilising the Medical Certificate of Cause of Death published in the instruction volume of the ICD-10. However, investment in health information processes necessary to promote the use of this certificate and improve mortality information is lacking in many countries. An appeal for support to make improvements has been launched through the Health Metrics Network’s MOVE-IT strategy (Monitoring of Vital Events – Information Technology) [World Health Organization, 2011]. Despite this international spotlight on the need for capture of mortality data and in the use of the ICD-10 to code the data reported on such certificates, there is little cohesion in the way that certifiers of deaths receive instruction in how to complete the death certificate, which is the main source document for mortality statistics. Complete and accurate documentation of the immediate, underlying and contributory causes of death of the decedent on the death certificate is a requirement to produce standardised statistical information and to the ability to produce cause-specific mortality statistics that can be compared between populations and across time. This paper reports on a research project conducted to determine the efficacy and accessibility of the certification module of the WHO’s newly-developed web based training tool for coders and certifiers of deaths. Involving a population of medical students from the Fiji School of Medicine and a pre and post research design, the study entailed completion of death certificates based on vignettes before and after access to the training tool. The ability of the participants to complete the death certificates and analysis of the completeness and specificity of the ICD-10 coding of the reported causes of death were used to measure the effect of the students’ learning from the training tool. The quality of death certificate completion was assessed using a Quality Index before and after the participants accessed the training tool. In addition, the views of the participants about accessibility and use of the training tool were elicited using a supplementary questionnaire. The results of the study demonstrated improvement in the ability of the participants to complete death certificates completely and accurately according to best practice. The training tool was viewed very positively and its implementation in the curriculum for medical students was encouraged. Participants also recommended that interactive discussions to examine the certification exercises would be an advantage.

An improved genetic algorithm and graph theory based method for optimal sectionalizer switch placement in distribution networks with DG

In this paper a new graph-theory and improved genetic algorithm based practical method is employed to solve the optimal sectionalizer switch placement problem. The proposed method determines the best locations of sectionalizer switching devices in distribution networks considering the effects of presence of distributed generation (DG) in fitness functions and other optimization constraints, providing the maximum number of costumers to be supplied by distributed generation sources in islanded distribution systems after possible faults. The proposed method is simulated and tested on several distribution test systems in both cases of with DG and non DG situations. The results of the simulations validate the proposed method for switch placement of the distribution network in the presence of distributed generation.

The impact of taxes on optimal portfolio choice : an Australian study

Taxes are an important component of investing that is commonly overlooked in both the literature and in practice. For example, many understand that taxes will reduce an investment’s return, but less understood is the risk-sharing nature of taxes that also reduces the investment’s risk. This thesis examines how taxes affect the optimal asset allocation and asset location decision in an Australian environment. It advances the model of Horan & Al Zaman (2008), improving the method by which the present value of tax liabilities are calculated, by using an after-tax risk-free discount rate, and incorporating any new or reduced tax liabilities generated into its expected risk and return estimates. The asset allocation problem is examined for a range of different scenarios using Australian parameters, including different risk aversion levels, personal marginal tax rates, investment horizons, borrowing premiums, high or low inflation environments, and different starting cost bases. The findings support the Horan & Al Zaman (2008) conclusion that equities should be held in the taxable account. In fact, these findings are strengthened with most of the efficient frontier maximising equity holdings in the taxable account instead of only half. Furthermore, these findings transfer to the Australian case, where it is found that taxed Australian investors should always invest into equities first through the taxable account before investing in super. However, untaxed Australian investors should invest their equity first through superannuation. With borrowings allowed in the taxable account (no borrowing premium), Australian taxed investors should hold 100% of the superannuation account in the risk-free asset, while undertaking leverage in the taxable account to achieve the desired risk-return. Introducing a borrowing premium decreases the likelihood of holding 100% of super in the risk-free asset for taxable investors. The findings also suggest that the higher the marginal tax rate, the higher the borrowing premium in order to overcome this effect. Finally, as the investor’s marginal tax rate increases, the overall allocation to equities should increase due to the increased risk and return sharing caused by taxation, and in order to achieve the same risk/return level as the lower taxation level, the investor must take on more equity exposure. The investment horizon has a minimal impact on the optimal allocation decision in the absence of factors such as mean reversion and human capital.

An advanced meshless method for time fractional diffusion equation

Recently, because of the new developments in sustainable engineering and renewable energy, which are usually governed by a series of fractional partial differential equations (FPDEs), the numerical modelling and simulation for fractional calculus are attracting more and more attention from researchers. The current dominant numerical method for modeling FPDE is Finite Difference Method (FDM), which is based on a pre-defined grid leading to inherited issues or shortcomings including difficulty in simulation of problems with the complex problem domain and in using irregularly distributed nodes. Because of its distinguished advantages, the meshless method has good potential in simulation of FPDEs. This paper aims to develop an implicit meshless collocation technique for FPDE. The discrete system of FPDEs is obtained by using the meshless shape functions and the meshless collocation formulation. The stability and convergence of this meshless approach are investigated theoretically and numerically. The numerical examples with regular and irregular nodal distributions are used to validate and investigate accuracy and efficiency of the newly developed meshless formulation. It is concluded that the present meshless formulation is very effective for the modeling and simulation of fractional partial differential equations.

A node-based smoothed conforming point interpolation method (NS-CPIM) for elasticity problems

This paper formulates a node-based smoothed conforming point interpolation method (NS-CPIM) for solid mechanics. In the proposed NS-CPIM, the higher order conforming PIM shape functions (CPIM) have been constructed to produce a continuous and piecewise quadratic displacement field over the whole problem domain, whereby the smoothed strain field was obtained through smoothing operation over each smoothing domain associated with domain nodes. The smoothed Galerkin weak form was then developed to create the discretized system equations. Numerical studies have demonstrated the following good properties: NS-CPIM (1) can pass both standard and quadratic patch test; (2) provides an upper bound of strain energy; (3) avoid the volumetric locking; (4) provides the higher accuracy than those in the node-based smoothed schemes of the original PIMs.

The analysis of social capital in online social communities

Social networks have proven to be an attractive avenue of investigation for researchers since humans are social creatures. Numerous literature have explored the term “social networks” from different perspectives and in diverse research fields. With the popularity of the Internet, social networking has taken on a new dimension. Online social communities therefore have become an emerging social avenue for people to communicate in today’s information age. People use online social communities to share their interests, maintain friendships, and extend their so-called circle of “friends”. Likewise, social capital, also known as human capital, is an important theory in sociology. Researchers usually utilise social capital theory when they investigate the topic relating to social networks. However, there is little literature that can provide an explicit and strong assertion in that research area due to the complexity of social capital. This thesis therefore focuses on the issue related to providing a better understanding about the relationship between social capital and online social communities. To enhance the value within the scope of this analysis, an online survey was conducted to examine the effects of the dimensions of social capital: relational capital, structural capital, and cognitive capital, determining the intensity of using online social communities. The data were derived from a total of 350 self-selected respondents completing an online survey during the research period. The main results indicate that social capital exists in online social communities under normal circumstances. Finally, this thesis also presents three contributions for both theory and practice in Chapter 5. The main results contribute to the understanding of connectivity in the interrelationships between individual social capital exchange within online social networks. Secondly, social trust was found to have a weak effect in influencing the intensity of individuals using online social communities. Third, the perpetual role of information sharing has an indirect influence on individual users participating in online social communities. This study also benefits online marketing consultants as marketers can not only gain consumer information easier from online social communities but also this understanding assists in designing effective communication within online social communities. The cross-sectional study, the reliability of Internet survey data, and sampling issues are the major three limitations in this research. The thesis provides a new research model and recommends that the mediating effects, privacy paradox, and social trust on online social communities should be further explored in future research.

A grounded theory of protest movement continuity

Using a thematic story telling approach which draws on ethnographic method, a grounded theory of protest movement continuity is presented. The grounded theory draws from theories and activist stories relating to the facilitative role of movement networks, social contagion theory and the cultural experience of activism. It highlights the contagious influence of protest networks in maintaining protest continuity over time and how this leads to common perceptions of development risk and opportunity within communities. It also reveals how communities use collective values and identity, social capital, emotional dynamics and symbolic artifacts to maintain protest continuity.

A human capital framework : designed for convergence

The 21" century business environment is dominated by unprecedented change across a broad spectrum of social, economic, technological and cultural factors (Nowotny, Scott & Gibbons 2001). Among these, two broad trends -economic globalisation and rising knowledge intensity (Hart 2006)have come to distinguish organisational life. Under the weight of these transformational influences, the developed world, it seems, has arrived at a transformational moment. The far-reaching effects of the global financial crisis and its shadowy twin: the threat of a double dip recession, continue to exert an unsteadying influence on global and corporate finances. Growth in developed economies has slumped, share prices have declined, the market value of corporations has slipped and unemployment rates, in the vast majority of developed economies, have risen. Gross domestic product (GDP) growth has retreated from the strong growth experienced in the late 1990s to negative growth in 2009 and a sluggish and unsteady recovery in 2010. In response, the reach of Government in terms of its participation in markets has been extended, bringing with it the need to transition to new governance and regulatory arrangements. Ongoing concerns regarding the pace and sustainability of the recovery remains a front-of-mind concern with bailouts, buybacks, borrowings and BP dominating news services: 'We are witnessing the reweaving of the social, political and economic fabric that binds our planet, with long-term consequences that are as or more profound than those of the industrial era' (Tapscott & Williams 2006, p. 59).

A nanoscratch method for measuring hardness of thin films

Thin solid films were extensively used in the making of solar cells, cutting tools, magnetic recording devices, etc. As a result, the accurate measurement of mechanical properties of the thin films, such as hardness and elastic modulus, was required. The thickness of thin films normally varies from tens of nanometers to several micrometers. It is thus challenging to measure their mechanical properties. In this study, a nanoscratch method was proposed for hardness measurement. A three-dimensional finite element method (3-D FEM) model was developed to validate the nanoscratch method and to understand the substrate effect during nanoscratch. Nanoindentation was also used for comparison. The nanoscratch method was demonstrated to be valuable for measuring hardness of thin solid films.

An enriched radial point interpolation method based on weak-form and strong-form

In this article, an enriched radial point interpolation method (e-RPIM) is developed for computational mechanics. The conventional radial basis function (RBF) interpolation is novelly augmented by the suitable basis functions to reflect the natural properties of deformation. The performance of the enriched meshless RBF shape functions is first investigated using the surface fitting. The surface fitting results have proven that, compared with the conventional RBF, the enriched RBF interpolation has a much better accuracy to fit a complex surface than the conventional RBF interpolation. It has proven that the enriched RBF shape function will not only possess all advantages of the conventional RBF interpolation, but also can accurately reflect the deformation properties of problems. The system of equations for two-dimensional solids is then derived based on the enriched RBF shape function and both of the meshless strong-form and weak-form. A numerical example of a bar is presented to study the effectiveness and efficiency of e-RPIM. As an important application, the newly developed e-RPIM, which is augmented by selected trigonometric basis functions, is applied to crack problems. It has been demonstrated that the present e-RPIM is very accurate and stable for fracture mechanics problems.

Social Procurement: Promoting the sustainability of NPOs through the transformation of economic, social and cultural capital

Social procurement provides a key source of income for the Third Sector, and is vital for the sustainability of many nonprofit organisations. Social procurement involves the exchange of economic capital from one organisation, typically government (although for-profit and non-profit organisations can also purchase), with a nonprofit organisations in order to deliver other forms of. It is this transformation of economic capital into other forms of capital (cultural, human, social) in the social procurement process, which is the focus of this paper. Four case studies, which are representative of the four main types of social procurement, will be examined in order to trace how economic capital is transformed into other types of capital in each of these cases. In so doing, the paper will advance our understanding of social procurement theoretically, and lead to a wider discussion about the role of social procurement in ensuring the sustainability of nonprofit organisations, and the civil societies in which they operate.