Miscibility and Hydrogen Bonding in Blends of Poly(4-vinylphenol)/Poly(vinyl methyl ketone)

The miscibility and phase behavior of poly(4-vinylphenol) (PVPh) with poly(vinyl methyl ketone) (PVMK) was investigated by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). It was shown that all blends of PVPh/PVMK are totally miscible. A DSC study showed the apparition of a single glass transition (T-g) over their entire composition range. When the amount of PVPh exceeds 50% in blends, the obtained T(g)s are found to be significantly higher than those observed for each individual component of the mixture, indicating that these blends are capable of forming interpolymer complexes. FTIR analysis revealed the existence of preferential specific interactions via hydrogen bonding between the hydroxyl and carbonyl groups, which intensified when the amount of PVPh was increased in blends. Furthermore, the quantitative FTIR study carried out for PVPh/PVMK blends was also performed for the vinylphenol (VPh) and vinyl methyl ketone (VMK) functional groups. These results were also established by scanning electron microscopy study (SEM).

Stress analysis of ZrO2/SiO2 multilayers deposited on different substrates with different thickness periods

The effects of repeating thickness periods on stress are studied in ZrO2/SiO2 multilayers deposited by electron-beam evaporation on BK7 glass and fused-silica substrates. The results show that the residual stress is compressive and decreases with an increase of the periods of repeating thickness in the ZrO2/SiO2 multilayers. At the same time, the residual stress in multilayers deposited on BK7 glass is less than that of samples deposited on fused silica. The variation of the microstructure examined by x-ray diffraction shows that microscopic deformation does not correspond to macroscopic stress, which may be due to variation of the interface stress. (c) 2005 Optical Society of America.

Analysis of electromagnetic propagation in birefringent thin film

In general, the propagating behavior of extraordinary wave in anisotropic materials is different from that in isotropic materials. With the tangential continuity of Maxwell's equations, the electromagnetic propagating behaviors have been investigated at the incident and exit interfaces of the uniaxial anisotropic thin film. The emphasis was placed on two interesting optical phenomena such as homolateral refraction behavior and wide-angle Brewster's phenomenon, which occurred at the interfaces of uniaxial anisotropic thin film.

Analysis of channel quality reporting mechanisms and their impact into 4G and beyond technologies

206 p.

Além da Linha Vermelha: um estudo sobre a formação de professores em Física, Química e Matemática na interface das políticas públicas e do mundo do trabalho

Esta pesquisa realiza um estudo sobre a formação de professores em Física, Química e Matemática na dimensão das políticas públicas educacionais e das novas ordenações do mundo produtivo. O eixo metodológico investe na abordagem qualitativa, elegendo como campo empírico o Instituto de Educação, Ciência e Tecnologia do Rio de Janeiro (IFRJ), mais especificamente, o campus Nilópolis, localizado na região da Baixada Fluminense (recorte geopolítico), no Estado do Rio de Janeiro. A técnica de pesquisa baseou-se na realização de entrevistas com licenciandos cujo perfil compreende àquele que tenha realizado atividades de estágio docente. Esta escolha justifica-se por ser este o perfil de estudante mais próximo do término do curso e que, principalmente, através desta experiência, apresenta concepções, ainda que iniciais, da realidade da educação básica. Este estudo investiu na história dos sujeitos participantes através de seus respectivos relatos, onde foi possível categorizá-los em importantes aspectos que se interconectam: 1) na análise das políticas públicas para a educação superior a partir da ênfase na investigação de como estas se efetivam em uma territorialidade e no contexto de uma nova institucionalidade; 2) na reflexão sobre o impacto das transformações do mundo do trabalho na subjetividade dos licenciandos, engendrando a possível atividade docente no cenário de crise de identidades profissionais; e 3) no exame da realidade das escolas da educação básica, espaço onde a formação se destina. Este caminho permitiu refletir sobre o lugar do magistério nas escolhas de formação e nas perspectivas profissionais.

Política Carioca Rindo a Toa e o Programa Saúde e Cidadania Dentescola: análise da política de saúde bucal no município do Rio de Janeiro e sua trajetória rumo à implementação considerando a interface com o Brasil Sorridente

A presente dissertação constituiu um estudo da política na Área de Saúde Bucal em um município de grande porte através dos seus processos - de formulação e implementação - seus atores e sua interface com a Política Nacional Brasil Sorridente. Tomando como referência a experiência do Rio de Janeiro no período de 2001 a 2006, optou-se por um estudo de caso por tratar-se de descrever a unidade a política - em profundidade e em detalhe. A condução de listas livres possibilitou um maior discernimento das mudanças político-organizacionais e principalmente de dois momentos consecutivos: a suposta centralidade da Saúde Bucal na agenda municipal com o decreto do Programa Saúde e Cidadania Dentescola e a oportunidade de se estabelecer uma política de Saúde Bucal contextualizada no acolhimento, no acesso e na universalidade da atenção. O processo de implementação da Política Carioca Rindo à Toa e do Programa Saúde e Cidadania Dentescola dependeu principalmente do aumento de recursos humanos e da aproximação desses com as propostas de Integralidade e Transversalidade.

As práticas de participação institucionalizadas e sua interface com a cultura política: um olhar sobre o cotidiano de um conselho municipal de saúde no nordeste brasileiro

A Constituição federal e a Lei 8.142/90 definem a participação da comunidade como condição necessária para o funcionamento do Sistema Único de Saúde (SUS). Tal definição constitucional surge no processo de l uta pela democratização do país e pela universalização dos direitos sociais, entre eles, o direito à saúde. Todavia, esse processo de democratização tem significado mais a adoção de procedimentos democráticos para organização do sistema político do que uma efetiva democratização das relações sociais pautadas pelos valores democráticos de igualdade e justiça social. No Brasil, a relação entre Estado e sociedade tem sido mediada por uma cultura política marcada pelo autoritarismo, patrimonialismo, clientelismo e o favor. Com o processo de democratização, na década de 1980, emergem elementos de uma nova cultura política adjetivada como democrática orientada pelos valores da autonomia, igualdade, solidariedade e justiça que passa a coexistir com a velha cultura. O objetivo geral deste estudo é analisar as práticas de participação presentes no Conselho Municipal de Saúde (CMS) de Fortaleza, no período de 1997-2005, e sua relação com a cultura política local. Para tanto partiu-se do principal pressuposto teórico: as práticas de participação exercidas nos conselhos de saúde inauguram uma nova institucionalidade que inclui novos sujeitos sociais os usuários na esfera pública, com as quais o processo de democratização amplia essa esfera, criando visibilidade para identificar o confronto entre a cultura política tradicional e a cultura política democrática. As técnicas de pesquisa utilizadas foram: a análise documental, a observação participante e a entrevista semiestruturada. A partir das diferentes evidências observadas no material empírico, identificou -se na análise dos dados a predominância da cultura política tradicional do autoritarismo e cooptação nas relações entre o poder público municipal e os representantes da sociedade civil ; e entre os conselheiros a tensão se manifestava na não-observância dos procedimentos democráticos, como eleições periódicas, respeito à lei e ao regimento que regula o funcionamento do CMS e no encaminhamento dos conflitos e disputas políticas. Quanto às práticas de participação, manifestaram-se de forma contraditória e dialética em ações caracterizadas pela crítica, denúncia, reivindicação, com poucas ações propositivas e na maioria das vezes tendo seu poder deliberativo desconsiderado pelo gestor. A condução política do conselho muitas vezes foi questionada, ocasionando crises de hegemonia e gerando conflitos e disputas pelo poder. A partir da análise desses conflitos e disputas políticas entre os grupos no interior do Conselho, tornou-se possível realizar uma leitura metódica acerca do confronto entre a cultura política tradicional e a democrática no CMS, constatando-se a predominância da primeira sobre a segunda. Por fim verificou-se o protagonismo do Ministério Público na resolução dos conflitos, em detrimento da força do melhor argumento. Em que pese a recorrente tutela do Ministério Público, foi pavimentado um caminho de resistências, ainda que minoritárias , contra a cultura política tradicional , cujas práticas de participação apresentam elementos constituintes para a sua transformação.

Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos

Sistemas deslizantes com interface formada com aços baixa liga e polímeros variados são vastamente utilizados na indústria automotiva em sistemas de transmissão de torque submetidas à carregamento axial. Geralmente esses sistemas são acoplados aos sistemas de direção e interagem quase diretamente com o usuário final do veículo. Para conhecer as condições de desgaste mais severas as quais esses sistemas são submetidos e tentar minimiza-las, foi proposta a análise tribológica, em tribômetro do tipo pino-no-disco, da interface aço SAE 1020 com poliamida 11 em água destilada, solução aquosa com 5% em massa de cloreto de sódio e solução aquosa com 184,21 g/l. de areia natural, de acordo com as normas técnicas automotivas VW PV1210:2010-02 e VW PV2982:2013-07. Os ensaios foram realizados em frequências de 3,0 Hz e 1,5 Hz com quantidade fixada em 10.000 ciclos de rotação. O potencial de corrosão em circuito aberto foi monitorado ao longo dos ensaios e a taxa de desgaste foi calculada. Foram evidenciados maiores coeficientes de atrito, maiores taxas de desgaste e maiores amplitudes de potencial de corrosão nas amostras ensaiadas em solução de areia; com valores mais brandos para as amostras ensaiadas em água destilada e valores intermediários para as amostras ensaiadas em solução de cloreto de sódio.

Characterizing Jobos Bay, Puerto Rico: a watershed modeling analysis and monitoring plan

Land-based pollution is commonly identified as a major contributor to the observed deterioration of shallow-water coral reef ecosystem health. Human activity on the coastal landscape often induces nutrient enrichment, hypoxia, harmful algal blooms, toxic contamination and other stressors that have degraded the quality of coastal waters. Coral reef ecosystems throughout Puerto Rico, including Jobos Bay, are under threat from coastal land uses such as urban development, industry and agriculture. The objectives of this report were two-fold: 1. To identify potentially harmful land use activities to the benthic habitats of Jobos Bay, and 2. To describe a monitoring plan for Jobos Bay designed to assess the impacts of conservation practices implemented on the watershed. This characterization is a component of the partnership between the U.S. Department of Agriculture (USDA) and the National Oceanic and Atmospheric Administration (NOAA) established by the Conservation Effects Assessment Project (CEAP) in Jobos Bay. CEAP is a multi-agency effort to quantify the environmental benefits of conservation practices used by private landowners participating in USDA programs. The Jobos Bay watershed, located in southeastern Puerto Rico, was selected as the first tropical CEAP Special Emphasis Watershed (SEW). Both USDA and NOAA use their respective expertise in terrestrial and marine environments to model and monitor Jobos Bay resources. This report documents NOAA activities conducted in the first year of the three-year CEAP effort in Jobos Bay. Chapter 1 provides a brief overview of the project and background information on Jobos Bay and its watershed. Chapter 2 implements NOAA’s Summit to Sea approach to summarize the existing resource conditions on the watershed and in the estuary. Summit to Sea uses a GIS-based procedure that links patterns of land use in coastal watersheds to sediment and pollutant loading predictions at the interface between terrestrial and marine environments. The outcome of Summit to Sea analysis is an inventory of coastal land use and predicted pollution threats, consisting of spatial data and descriptive statistics, which allows for better management of coral reef ecosystems. Chapters 3 and 4 describe the monitoring plan to assess the ecological response to conservation practices established by USDA on the watershed. Jobos Bay is the second largest estuary in Puerto Rico, but has more than three times the shoreline of any other estuarine area on the island. It is a natural harbor protected from offshore wind and waves by a series of mangrove islands and the Punta Pozuelo peninsula. The Jobos Bay marine ecosystem includes 48 km² of mangrove, seagrass, coral reef and other habitat types that span both intertidal and subtidal areas. Mapping of Jobos Bay revealed 10 different benthic habitats of varying prevalence, and a large area of unknown bottom type covering 38% of the entire bay. Of the known benthic habitats, submerged aquatic vegetation, primarily seagrass, is the most common bottom type, covering slightly less than 30% of the bay. Mangroves are the dominant shoreline feature, while coral reefs comprise only 4% of the total benthic habitat. However, coral reefs are some of the most productive habitats found in Jobos Bay, and provide important habitat and nursery grounds for fish and invertebrates of commercial and recreational value.

Bonding regimes of nitrogen in amorphous carbon

Nitrogen can have numerous effects on diamond-like carbon: it can dope, it can form the hypothetical superhard compound C3N4, or it can create fullerene-like bonding structures. We studied amorphous carbon nitrogen films deposited by a filtered cathodic vacuum arc as a function of nitrogen content, ion energy and deposition temperature. The incorporation of nitrogen from 10-2 to 10 at% was measured by secondary ion mass spectrometry and elastic recoil detection analysis and was found to vary slightly sublinearly with N2 partial pressure during deposition. In the doping regime from 0 to about 0.4% N, the conductivity changes while the sp3 content and optical gap remain constant. From 0.4 to approximately 10% N, existing sp2 sites condense into clusters and reduce the band gap. Nitrogen contents over 10% change the bonding from mainly sp3 to mainly sp2. Ion energies between 20 and 250 eV do not greatly modify this behaviour. Deposition at higher temperatures causes a sudden loss of sp3 bonding above about 150 °C. Raman spectroscopy and optical gap data show that existing sp2 sites begin to cluster below this temperature, and the clustering continues above this temperature. This transition is found to vary only weakly with nitrogen addition, for N contents below 10%.

Nonlinear drillstring dynamics analysis

This paper studies the dynamical response of a rotary drilling system with a drag bit, using a lumped parameter model that takes into consideration the axial and torsional vibration modes of the bit. These vibrations are coupled through a bit-rock interaction law. At the bit-rock interface, the cutting process introduces a state-dependent delay, while the frictional process is responsible for discontinuous right-hand sides in the equations governing the motion of the bit. This complex system is characterized by a fast axial dynamics compared to the slow torsional dynamics. A dimensionless formulation exhibits a large parameter in the axial equation, enabling a two-time-scales analysis that uses a combination of averaging methods and a singular perturbation approach. An approximate model of the decoupled axial dynamics permits us to derive a pseudoanalytical expression of the solution of the axial equation. Its averaged behavior influences the slow torsional dynamics by generating an apparent velocity weakening friction law that has been proposed empirically in earlier work. The analytical expression of the solution of the axial dynamics is used to derive an approximate analytical expression of the velocity weakening friction law related to the physical parameters of the system. This expression can be used to provide recommendations on the operating parameters and the drillstring or the bit design in order to reduce the amplitude of the torsional vibrations. Moreover, it is an appropriate candidate model to replace empirical friction laws encountered in torsional models used for control. © 2009 Society for Industrial and Applied Mathematics.

Change prediction using interface data

Managing change can be challenging due to the high levels of interdependency in concurrent engineering processes. A key activity in engineering change management is propagation analysis, which can be supported using the change prediction method. In common with most other change prediction approaches, the change prediction method has three important limitations: L1: it depends on highly subjective input data; L2: it is capable of modelling 'generalised cases' only and cannot be; customised to assess specific changes; and L3: the input data are static, and thus, guidance does not reflect changes in the design. This article contributes to resolving these limitations by incorporating interface information into the change prediction method. The enhanced method is illustrated using an example based on a flight simulator. © The Author(s) 2013.

The dominant role of the solvent-water interface in water droplet templating of polymers

We investigate the formation of microstructured polymer networks known as Breath Figure templated structures created by the presence of water vapour over evaporating polymer solutions. We use a highly controlled experimental approach to examine this dynamic and non-equilibrium process to uniquely compare pure solvent systems with polymer solutions and demonstrate using a combination of optical microscopy, focused ion-beam milling and SEM analysis that the porous polymer microstructure is completely controlled by the interfacial forces that exist between the water droplet and the solvent until a final drying dilation of the imprints. Water droplet contact angles are the same in the presence or absence of polymer and are independent of size for droplets above 5 μm. The polymer acts a spectator that serves to trap water droplets present at the air interface, and to transfer their shape into the polymer film. For the smallest pores, however, there are unexpected variations in the contact angle with pore size that are consistent with a possible contribution from line tension at these smaller dimensions. © The Royal Society of Chemistry.

An analysis of competing toughening mechanisms in layered and particulate solids

The relative potency of common toughening mechanisms is explored for layered solids and particulate solids, with an emphasis on crack multiplication and plasticity. First, the enhancement in toughness due to a parallel array of cracks in an elastic solid is explored, and the stability of co-operative cracking is quantified. Second, the degree of synergistic toughening is determined for combined crack penetration and crack kinking at the tip of a macroscopic, mode I crack; specifically, the asymptotic problem of self-similar crack advance (penetration mode) versus 90 ° symmetric kinking is considered for an isotropic, homogeneous solid with weak interfaces. Each interface is treated as a cohesive zone of finite strength and toughness. Third, the degree of toughening associated with crack multiplication is assessed for a particulate solid comprising isotropic elastic grains of hexagonal shape, bonded by cohesive zones of finite strength and toughness. The study concludes with the prediction of R-curves for a mode I crack in a multi-layer stack of elastic and elastic-plastic solids. A detailed comparison of the potency of the above mechanisms and their practical application are given. In broad terms, crack tip kinking can be highly potent, whereas multiple cracking is difficult to activate under quasi-static conditions. Plastic dissipation can give a significant toughening in multi-layers especially at the nanoscale. © 2013 Springer Science+Business Media Dordrecht.

Optimization of an effective extraction procedure for the analysis of microcystins in soils and lake sediments

Microcystin analysis in sediments and soils is considered very difficult due to low recovery for extraction. This is the primary limiting factor for understanding the fate of toxins in the interface between water and sediment in both the aquatic ecosystem as well as in soils. In the present study, a wide range of extraction solvents were evaluated over a wide range of pH, extraction approaches and equilibration time to optimize an effective extraction procedure for the analysis of microcystins in soils and lake sediments. The number of extractions required and acids in extraction solutions were also studied. In this procedure, EDTA-sodium pyrophosphate solution was selected as an extraction solvent based on the adsorption mechanism study. The optimized procedure proved to be highly efficient and achieved over 90% recovery. Finally, the developed procedure was applied to field soil and sediment sample collected from Chinese lakes during bloom seasons and microcystins were determined in six of ten samples. (c) 2005 Elsevier Ltd. All rights reserved.