Degradation in seawater of structural adhesives for hybrid fibre-metal laminated materials

The adhesives used for applications in marine environments are subject to particular chemical conditions, which are mainly characterised by an elevated chlorine ion content and intermittent wetting/drying cycles, among others.These conditions can limit the use of adhesives due to the degradation processes that they experience. In this work, the chemical degradation of two different polymers, polyurethane and vinylester, was studied in natural seawater under immersion for different periods of time.The diffusion coefficients and concentration profiles of water throughout the thickness of the adhesiveswere obtained.Microstructural changes in the polymer due to the action of water were observed by SEM, and the chemical degradation of the polymer was monitored with the Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The degradation of the mechanical properties of the adhesive was determined by creep tests withMixed Cantilever Beam (MCB) specimens at different temperatures. After 180 days of immersion of the specimens, it was concluded that the J-integral value (depending on the strain) implies a loss of stiffness of 51% and a decrease in the failure load of 59% for the adhesive tested.

Influence of different organoclays on the curing, morphology, and dynamic mechanical properties of an epoxy adhesive

The thermal, mechanical, and adhesive properties of nanoclay-modified adhesives were investigated. Two organically modified montmorillonites: Cloisite 93A (C93A) and Nanomer I.30E (I.30E) were used as reinforcement of an epoxy adhesive. C93A and I.30E are modified with tertiary and primary alkyl ammonium cations, respectively. The aim was to study the influence of the organoclays on the curing, and on the mechanical and adhesive properties of the nanocomposites. A specific goal was to compare their behavior with that of Cloisite30B/epoxy and Cloisite15A/ epoxy nanocomposites that we have previously studied. Both C30B and C15A are modified with quaternary alkyl ammonium cations. Differential scanning calorimetry results showed that the clays accelerate the curing reaction, an effect that is related to the chemical structure of the ammonium cations. The three Cloisite/nanocomposites showed intercalated clay structures,the interlayer distance was independent of the clay content. The I.30E/epoxy nanocomposites presented exfoliated structure due to the catalytic effect of the organic modifier. Clay-epoxy nanocompo-sites showed lower glass transition temperature (Tg) and higher values of storage modulus than neat epoxy thermoset, with no significant differences between exfoliated or intercalated nanocom-posites. The shear strength of aluminum joints using clay/epoxy adhesives was lower than with the neat epoxy adhesive. The wáter aging was less damaging for joints with I.30E/epoxy adhesive.

Muro cortina modular con marco de baja transmitancia térmica integrado en el vidrio aislante a través de adhesivos estructurales = Unitised curtain wall with low thermal transmittance frame integrated within the insulating glass unit through structural adhesives

Los muros cortina modulares están constituidos por paneles prefabricados que se fijan al edificio a través de anclajes a lo largo del borde del forjado. El proceso de prefabricación garantiza buena calidad y control de los acabados y el proceso de instalación es rápido y no requiere andamiaje. Por estas razones su uso está muy extendido en torres. Sin embargo, el diseño de los marcos de aluminio podría ser más eficiente si se aprovechara la rigidez de los vidrios para reducir la profundidad estructural de los montantes. Asimismo, se podrían reducir los puentes térmicos en las juntas si se sustituyeran los marcos por materiales de menor conductividad térmica que el aluminio. Esta investigación persigue desarrollar un muro cortina alternativo que reduzca la profundidad estructural, reduzca la transmisión térmica en las juntas y permita un acabado enrasado al interior, sin que sobresalgan los montantes. La idea consiste en conectar un marco de material compuesto de fibra de vidrio a lo largo del borde del vidrio aislante a través de adhesivos estructurales para así movilizar una acción estructural compuesta entre los dos vidrios y lograr una baja transmitancia térmica. El marco ha de estar integrado en la profundidad del vidrio aislante. En una primera fase se han efectuado cálculos estructurales y térmicos preliminares para evaluar las prestaciones a un nivel esquemático. Además, se han realizado ensayos a flexión en materiales compuestos de fibra de vidrio y ensayos a cortante en las conexiones adhesivas entre vidrio y material compuesto. Con la información obtenida se ha seleccionado el material del marco y del adhesivo y se han efectuado cambios sobre el diseño original. Los análisis numéricos finales demuestran una reducción de la profundidad estructural de un 80% y una reducción de la transmisión térmica de un 6% en comparación con un sistema convencional tomado como referencia. El sistema propuesto permite obtener acabados enrasados. ABSTRACT Unitised curtain wall systems consist of pre manufactured cladding panels which can be fitted to the building via pre fixed brackets along the edge of the floor slab. They are universally used for high rise buildings because the factory controlled assembly of units ensures high quality and allows fast installation without external access. However, its frame is structurally over-dimensioned because it is designed to carry the full structural load, failing to take advantage of potential composite contribution of glass. Subsequently, it is unnecessarily deep, occupying valuable space, and protrudes to the inside, causing visual disruption. Moreover, it is generally made of high thermal conductivity metal alloys, contributing to substantial thermal transmission at joints. This research aims to develop a novel frame-integrated unitised curtain wall system that will reduce thermal transmission at joints, reduce structural depth significantly and allow an inside flush finish. The idea is to adhesively bond a Fibre Reinforced Polymer (FRP) frame to the edge of the Insulated Glass Unit (IGU), thereby achieving composite structural behaviour and low thermal transmittance. The frame is to fit within the glazing cavity depth. Preliminary analytical structural and numerical thermal calculations are carried out to assess the performance of an initial schematic design. 4-point bending tests on GFRP and single-lap shear tests on bonded connections between GFRP and glass are performed to inform the frame and adhesive material selection process and to characterise these materials. Based on the preliminary calculations and experimental tests, some changes are put into effect to improve the performance of the system and mitigate potential issues. Structural and thermal numerical analysis carried out on the final detail design confirm a reduction of the structural depth to almost one fifth and a reduction of thermal transmission of 6% compared to a benchmark conventional system. A flush glazed appearance both to the inside and the outside are provided while keeping the full functionality of a unitised system.

Two subsites in the binding domain of the acetylcholine receptor: an aromatic subsite and a proline subsite.

The ligand binding site of the nicotinic acetylcholine receptor (AcChoR) is localized in the alpha-subunit within a domain containing the tandem Cys-192 and -193. By analyzing the binding-site region of AcChoR from animal species that are resistant to alpha-neurotoxins, we have previously shown that four residues in this region, at positions 187, 189, 194, and 197, differ between animals sensitive (e.g., mouse) and resistant (e.g., mongoose and snake) to alpha-bungarotoxin (alpha-BTX). In the present study, we performed site-directed mutagenesis on a fragment of the mongoose AcChoR alpha-subunit (residues 122-205) and exchanged residues 187, 189, 194, and 197, either alone or in combination, with those present in the mouse alpha-subunit sequence. Only the mongoose fragment in which all four residues were mutated to the mouse ones exhibited alpha-BTX binding similar to that of the mouse fragment. The mongoose double mutation in which Leu-194 and His-197 were replaced with proline residues, which are present at these positions in the mouse AcChoR and in all other toxin binders, bound alpha-BTX to approximately 60% of the level of binding exhibited by the mouse fragment. In addition, replacement of either Pro-194 or -197 in the mouse fragment with serine and histidine, respectively, markedly decreased alpha-BTX binding. All other mutations resulted in no or just a small increase in alpha-BTX binding. These results have led us to propose two subsites in the binding domain for alpha-BTX: the proline subsite, which includes Pro-194 and -197 and is critical for alpha-BTX binding, and the aromatic subsite, which includes amino acid residues 187 and 189 and determines the extent of alpha-BTX binding.

Annual report of the secretary of the State Board of Agriculture of the State of Michigan and ... annual report of the Agricultural College Experiment Station from ..

Printer varies.

Roster of the men and women who served in the army or naval service (including the Marine corps) of the United States or its allies from the state of North Dakota in the World war, 1917-1918...

Prepared and published under the direction of Brigadier General C. Angus Fraser, the adjutant general of North Dakota. By authority of Legislative Assembly of North Dakota.

The Michigan forest fire experiment station: what it is and what it is doing. Division of field administration, Michigan Department of conservation and Lake states forest experiment station, Forest service, United States Department of agriculture cooperating. 1932.

Mode of access: Internet.

Adhesive bonding of titanium and its alloys /

"August 1965."

Crown cases reserved for consideration and decided by the judges of England.

Includes index.

Comedias [binders title].

Title-page wanting.

Records of the colony of Rhode Island and Providence Plantations, in New England : Printed by order of the General assemby /

Binders title: Rhode Island colonial records.

Structural adhesives: an introduction for potential users

"Submitted in partial fulfillment of the requirements in Professor Georges F. Doriot's course in manufacturing at the Harvard Graduate School of Business Administration during ... 1957-1958."

Rheological properties of adhesives considered for interface damping

Mode of access: Internet.

The literary works of Sir Joshua Reynolds ... containing his Discourses, papers in the Idler, the Journal of a tour through Flanders and Holland, and also his commentary on Du Fresnoy's Art of painting.

"A chronological list of painters, from the revival of the art to the beginning of the last century": v. 3, p. [291]-323.

A history of Catholicity in Richmond and Wayne Co., Ind. /

Mode of access: Internet.