A mathematical model for the dynamics of Banana Xanthomonas Wilt with vertical transmission and inflorescence infection

A mathematical model for Banana Xanthomonas Wilt (BXW) spread by insect is presented. The model incorporates inflorescence infection and vertical transmission from the mother corm to attached suckers, but not tool-based transmission by humans. Expressions for the basic reproduction number R0 are obtained and it is verified that disease persists, at a unique endemic level, when R0 > 1. From sensitivity analysis, inflorescence infection rate and roguing rate were the parameters with most influence on disease persistence and equilibrium level. Vertical transmission parameters had less effect on persistence threshold values. Parameters were approximately estimated from field data. The model indicates that single stem removal is a feasible approach to eradication if spread is mainly via inflorescence infection. This requires continuous surveillance and debudding such that a 50% reduction in inflorescence infection and 2–3 weeks interval of surveillance would eventually lead to full recovery of banana plantations and hence improved production.

Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil

In recent times, increasing attention has been paid to the use of renewable resources particularly of plant origin keeping in view the ecological concerns, renewability and many governments passing laws for the use of such materials. On the other hand, despite abundant availability of lignocellulosic materials in Brazil, very few attempts have been made about their utilization, probably due to lack of sufficient structure/property data. Systematic studies to know their properties and morphology may bridge this gap while leading to value addition to these natural materials. Chemical composition, X-ray powder diffraction, and morphological studies and thermal behavior aspects in respect of banana, sugarcane bagasse sponge gourd fibers of Brazilian origin are presented. Chemical compositions of the three fibers are found to be different than those reported earlier. X-ray diffraction patterns of these three fibers exhibit mainly cellulose type I structure with the crystallinity indices of 39%, 48% and 50% respectively for these fibers. Morphological studies of the fibers revealed different sizes and arrangement of cells. Thermal stability of all the fibers is found to be around 200 degrees C. Decomposition of both cellulose and hemicelluloses in the fibers takes place at 300 degrees C and above, while the degradation of fibers takes place above 400 degrees C. These data may help finding new uses for these fibers. (C) 2009 Elsevier B.V. All rights reserved.

Att prata ihop sig i rätten

Negotiating experience in the court How do judges assess witness credibility, and how do they proceed to reach sustainable conclusions in a criminal court? This article is based on discussions in four focus groups with lay judges in Swedish district courts. In criminal court trials, a version of an event is generally reinforced if it is confirmed by witnesses. However, if their narratives are too similar, none of them is found trustworthy. The focus group participants agreed that if witnesses were suspected of having discussed their individual experiences of an event and accommodated them into a common story, their testimonies were not considered credible. While testimonies should ideally be untainted by other people’s impressions and opinions, other rules govern the truth of the court. The lay judges appreciated their deliberations, including negotiations on impressions and memories of the trial, and they sometimes adjusted their perceptions in the light of information provided by other members of the court. However, if the lay judges are viewed as witnesses of what takes place in the trial, this gives rise to a paradox: While witness negotiations on experiences are regarded as a means to construct a false or biased story, the same kind of interaction between the judges is considered necessary to establish a consensual truth of what actually happened.

”Vi kan vistas i samma rum men jag tänker inte prata med dig” : Religionskunskapslärares tolkning av begreppet tolerans samt dess betydelse och funktion i undervisningen

This is a qualitative interview study aiming to examine the concept of tolerance as it is a core value in the curriculum for the Swedish upper secondary school and high school. The concept of tolerance is linked to the subject of religious studies. A total of six teachers were interviewed regarding their understanding and interpretation of the concept, as well as its place in their teaching. The method of analysis was hermeneutic and the statements made by the teachers were further analyzed in the light of normcritical pedagogy and didactical awareness. The results show a diversified understanding of the concept, manifested in a broad scale of attitudes to it, ranging from negative to positive, though all were based on a reflective approach. This affected the teachers' tendency to include, or focus on, the concept of tolerance in their teaching, varying from active inclusion to exclusion. The discussion focuses on the differences and difficulties associated with acts of tolerance versus attitudes of tolerance. The teachers define religious studies as a subject with heavy focus on interpersonal relations. Acts of tolerance are therefore problematic as they are also acts of power between individuals and groups. This shows the didactical importance of discussing the concept of tolerance, mainly in relation to attitudes and acts, between teachers as well as in the classroom.

Hidrogenação de catalítica de acetileno sobre catalisadores de paládio e catalisadores bimetálicos de paládio e prata

Nesse estudo, prepararam-se catalisadores de paládio e catalisadores de paládio e prata que foram avaliados, juntamente com o catalisador comercial G58H para a reação de hidrogenação seletiva de acetileno. Foram preparados materiais com 0,03% e 0,1% de Pd depositados sobre α-Al2O3 e α-Al2O3 impregnada com 0,2% de Ag. A superfície dos catalisadores foi analisada por quimissorção de CO, TPR de H2 e medidas de área superficial pelo método BET. Os catalisadores de paládio e paládio/prata mostraram-se bastante ativos e seletivos para a reação de hidrogenação de acetileno. Os resultados dos ensaios de quimissorção de CO indicaram que os catalisadores monometálicos preparados a partir do precursor Pd(NO3)2 possuem maior dispersão e que esta diminui com o aumento do conteúdo metálico. A adição da prata diminui a dispersão do paládio nos catalisadores bimetálicos. As análises de redução a temperatura programada (TPR) indicaram que os catalisadores monometálicos de paládio preparados a partir do precursor Pd(NO3)2 apresentam um número maior de espécies redutíveis. No caso dos catalisadores bimetálicos, as análises de TPR permitiram a identificação de fases metálicas onde o paládio interage com a prata. prata. As medidas de área superficial sugeriram que a adição da fase metálica reduz a área superficial dos catalisadores. Os ensaios de atividade catalítica mostraram que os catalisadores mono e bimetálicos preparados a partir do precursor Pd(NO3)2 são mais ativos que os preparados a partir do complexo [Pd(acac)2]. A atividade aumenta com percentual de paládio, porém, as menores seletividades foram obtidas para os catalisadores com maior percentual de paládio. Os catalisadores bimetálicos de Pd/Ag mostraram-se menos ativos que os monometálicos de paládio, entretanto foram mais seletivos na formação de etileno.

O outro lado de cá: histórias e memórias de Cachoeira da Prata

O principal objetivo dessa dissertação é analisar, através de um estudo caso, como a questão do “preconceito intergrupal” pode ser percebida no desenvolvimento histórico de pequenos municípios brasileiros. Escolhendo a história da memória da cidade de Cachoeira da Prata como objeto central, buscamos discutir como ocorreu o processo de diferenciação social da pequena comunidade formada pelos descendentes do ex-escravo Nicolau Teixeira do restante da cidade. Para tanto, dividimos a dissertação em duas partes. A primeira é formada pelos três primeiros capítulos, nos quais apresentamos a vila fabril de Cachoeira de Macacos como o cenário, no qual o cel. Américo Teixeira é identificado como o líder maior de um projeto de domínio político e industrial que deixou marcas duradouras na memória da população mais antiga da cidade. Nesse contexto, buscamos discutir como o fenômeno do pós-emancipação da escravidão se manifestou na localidade, analisando parte da trajetória de vida do ex-escravo Nicolau Teixeira, um leal apoiador do projeto político do cel. Américo, que se tornou, na primeira metade do século XX, o patriarca de uma comunidade criada nas imediações da antiga vila fabril. Na segunda parte, composta exclusivamente pelo quarto capítulo, discutimos de maneira conjugada, a história da diferenciação social da comunidade e diferentes posicionamentos políticos e metodológicos que adotamos ao longo da pesquisa. Após essa análise, concluímos que só é possível entender os meandros do processo que levou os descendentes de Nicolau Teixeira à condição de exclusão social após percebê-los como atores capazes de elaborar narrativas e representações que auxiliam a população de Cachoeira da Prata a conhecer um “outro lado” da história local.

Banana

Imagem componente do jogo “DigesTower (http://www.loa.sead.ufscar.br/digestower.php)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).

Estudo da molhabilidade de ligas de adição à base de prata sobre insertos cerâmicos para aplicação em brocas perfuração de poços de petróleo

Metal-ceramic interfaces are present in tricone drill bits with hard ceramic inserts for oil well drilling operations. The combination of actions of cutting, crushing and breaking up of rocks results in the degradation of tricone drill bits by wear, total or partial rupture of the drill bit body or the ceramic inserts, thermal shock and corrosion. Also the improper pressfitting of the ceramic inserts on the bit body may cause its total detachment, and promote serious damages to the drill bit. The improvement on the production process of metal-ceramic interfaces can eliminate or minimize some of above-mentioned failures presented in tricone drill bits, optimizing their lifetime and so reducing drilling metric cost. Brazing is a widely established technique to join metal-ceramic materials, and may be an excellent alternative to the common mechanical press fitting process of hard ceramic inserts on the steel bit body for tricone drill bit. Wetting phenomena plays an essential role in the production of metal/ceramic interfaces when a liquid phase is present in the process. In this work, 72Silver-28Copper eutectic based brazing alloys were melted onto zirconia, silicon nitride and tungsten carbide/Co substrates under high vacuum. Contact angle evolution was measured and graphically plotted, and the interfaces produced were analysed by SEM-EDX. The AgCu eutectic alloy did not wet any ceramic substrates, showing high contact angles, and so without chemical interaction between the materials. Better results were found for the systemns containing 3%wt of titanium in the AgCu alloy. The presence os titanium as a solute in the alloy produces wettable cand termodinamically stable compounds, increasing the ceramics wetting beahviour

Desenvolvimento de filtros cerâmicos impregnados com nanopartículas de prata para desinfecção de água potável

Brazil has vast amounts of hydric resources, whose quality has been deteriorating due to pollutant dumping. Household waste disposal is one of the main sources of water pollution, stimulating bacteria proliferation and introducing microorganisms, including those from fecal matter. Conventional water disinfection methods are a solution, but on the downside, they lead to the formation byproducts hazardous to human health. In this study, aiming to develop bactericidal filters for the disinfection of drinking water; silver nanoparticles were deposited on alumina foams through three routes: sputtering DC, dip coating and in situ chemical reduction of silver nitrate. The depositions were characterized through X-ray diffraction, scanning electron microscopy and EDS element mapping. The influence of the depositions on permeability and mechanical properties of the ceramic foams was assessed and, in sequence, a preliminary antibacterial efficiency analysis was carried out. Characterization results indicate that the chemical reduction routes were efficient in depositing homogeneously distributed silver particles and that the concentration of the metallic precursor salt affects size and morphology of the particles. The antibacterial efficiency analysis indicates that the chemical reduction filters have potential for water disinfection

Efeito antibacteriano de tecidos têxteis revestidos por prata através da técnica de deposição por plasma

In this study, it has been investigated the influence of silver film deposition onto 100% polyester woven and non-woven, on the survival of Escherichia coli and Staphylococcus aureus in contact with these surfaces. The treatment was performedin a chamber containing the working gas at low pressure (~ 10-2 mbar). Some process parameters such as as voltage: 470 V; pressure: 10-2 mbar; current : 0.40 A and gas flow: 6 and 10 cm3/min were kept constant. For the treatments with purêargon plasma using a flow of 6 and 10 cm3/min, different treatment times were evaluated, such as, 10 , 20, 30, 40, 50 and 60 minutes. Contact angle (sessile drop), measurements were used to determine the surface tension of the treated fabrics and its influence on the bacteria grow as weel as the possibilities of a biofilm formation. The formation of a silver film, as well as the amount of this element was verified byEDX technique. The topography was observed through scanning electron microscopy (SEM) to determine the size of silver grains formed on the surfaces of the fabric and assess homogeneity of treatment. The X-ray diffraction (XRD) was used to analyze the structure of silver film deposition. The woven fabric treatments enabled the formation of silver particulate films with particle size larger than the non-woven fabrics. With respect to bacterial growth, all fabrics were shown to be bactericidal for Staphylococcus aureus (S. aureus), while for the Escherichia coli (E. coli), the best results were found for the non-woven fabric (TNT) treated with a flow of 10 cm3/min to both bacteria

Variação sazonal da concentração de nutrientes em folhas de bananeiras, no Vale do Ribeira-SP

The Vale do Ribeira, SP, main agricultural activity is the banana crop, which accounts for most of this fruit production in the State of São Paulo. The nutritional balance of the plant is one of the most important factors for the banana plant can complete the cycle and achieve high productivity. Aiming to evaluate the seasonal variation of leaf nutrient concentration in banana plants in Vale do Ribeira-SP, we used the results of 252 chemical analyses of plant tissue, collected from August 2009 to September 2010, in the 18 representative properties for the region, ten cultivated with subgroup Cavendish banana plant and eight of subgroup Prata banana plant. The largest variation between the macronutrient occurred for K and S, and among the micronutrients, especially for Fe and B. In some dates of evaluation, there was a higher leaf concentration of P, K, Ca and Zn, in subgroup Cavendish banana plants, while the subgroup Prata banana plants showed higher leaf concentration, especially of Mn, B and N. Climatic conditions, especially rain, influenced the leaf nutrient content, especially for K, N, S, B and Fe.

Viabilidade econômica de manejos nutricionais na cultura de banana

O manejo adequado da adubação, visando à otimização da produtividade e qualidade dos frutos, é uma etapa representativa do processo produtivo para rentabilidade do empreendedor rural. Neste contexto, objetivou-se analisar a viabilidade econômica de cinco tipos de manejo nutricional de bananeiras de cultivares do subgrupo Cavendish, na região do Médio Paranapanema (SP), em 2009/2010. Foram utilizadas estruturas do custo operacional efetivo (COE) e custo operacional total (COT) e três indicadores de rentabilidade. Diferenças significativas foram observadas entre os manejos, sendo que o sistema de manejo que resultou em maior vantagem econômica para o produtor proporcionou índice médio de lucratividade 25,6% superior aos demais tratamentos, além de a receita líquida total ser, em média, 29,5% superior aos outros tipos de manejo. O custo por unidade produzida foi inferior no manejo nutricional mais lucrativo, apesar de a produtividade ter sido 9,5% inferior ao manejo que apresentou os maiores índices de produtividade.

Avaliação econômica das perdas de banana no mercado varejista: um estudo de caso

O objetivo do presente estudo foi a determinação das perdas físicas e econômicas de banana em diferentes equipamentos varejistas na Cidade de Botucatu - SP e suas possíveis causas. Os equipamentos foram sorteados aleatoriamente. As informações foram coletadas através da aplicação de questionário para a determinação das perdas de três variedades de banana. O resultado mostrou perda global de 39 toneladas, correspondente a 11,1% da quantidade comercializada, sendo 10,5% em supermercados, 15,0% em quitandas/sacolões e 10,6% em feiras livres. O valor total das perdas anuais atingiu R$ 35.038,00, em valores de maio de 2002. A manipulação excessiva do cliente, excedente de oferta, uso de embalagem inadequada e baixa qualidade da fruta foram as principais causas de perdas. Conclui-se pela necessidade de conscientização do cliente, do uso de embalagens plásticas e de cuidados no manuseio da fruta durante toda pós-colheita.