The acceptability of alcohol fuels for automobile engines

The aim of this project was to carry out an investigastion into suitable alternatives to gasoline for use in modern automobiles. The fuel would provide the western world with a means of extending the natural gasoline resources and the third world a way of cutting down their dependence on the oil producing countries for their energy supply. Alcohols, namely methanol and ethanol, provide this solution. They can be used as gasoline extenders or as fuels on their own.In order to fulfil the aims of the project a literature study was carried out to investigate methods and costs of producing these fuels. An experimental programme was then set up in which the performance of the alcohols was studied on a conventional engine. The engine used for this purpose was the Fiat 127 930cc four cylinder engine. This engine was used because of its popularity in the European countries. The Weber fixed jet carburettor, since it was designed to be used with gasoline, was adapted so that the alcohol fuels and the blends could be used in the most efficient way. This was mainly to take account of the lower heat content of the alcohols. The adaptation of the carburettor was in the form of enlarging the main metering jet. Allowances for the alcohol's lower specfic gravity were made during fuel metering.Owing to the low front end volatility of methanol and ethanol, it was expected that `start up' problems would occur. An experimental programme was set up to determine the temperature range for a minimum required percentage `take off' that would ease start-up since it was determined that a `take off' of about 5% v/v liquid in the vapour phase would be sufficient for starting. Additions such as iso-pentane and n-pentane were used to improve the front end volatility. This proved to be successful.The lower heat content of the alcohol fuels also meant that a greater charge of fuel would be required. This was seen to pose further problems with fuel distribution from the carburettor to the individual cylinders on a multicylinder engine. Since it was not possible to modify the existing manifold on the Fiat 127 engine, experimental tests on manifold geometry were carried out using the Ricardo E6 single cylinder variable compression engine. Results from these tests showed that the length, shape and cross-sectional area of the manifold play an important part in the distribution of the fuel entering the cylinder, ie. vapour phase, vapour/small liquid droplet/liquid film phase, vapour/large liquid droplet/liquid film phase etc.The solvent properties of the alcohols and their greater electrical conductivity suggested that the materials used on the engine would be prone to chemical attack. In order to determine the type and rate of chemical attack, an experimental programme was set up whereby carburettor and other components were immersed in the alcohols and in blends of alcohol with gasoline. The test fuels were aerated and in some instances kept at temperatures ranging from 50oC to 90oC. Results from these tests suggest that not all materials used in the conventional engine are equally suitable for use with alcohols and alcohol/gasoline blends. Aluminium for instance was severely attacked by methanol causing pitting and pin-holing in the surface.In general this whole experimental programme gave valuable information on the acceptability of substitute fuels. While the long term effects of alcohol use merit further study, it is clear that methanol and ethanol will be increasingly used in place of gasoline.

Automobile friction materials: a test instrument and technique for determining dynamic mechanical properties in relation to brake squeal

This study is primarily concerned with the problem of break-squeal in disc brakes, using moulded organic disc pads. Moulded organic friction materials are complex composites and due to this complexity it was thought that they are unlikely to be of uniform composition. Variation in composition would under certain conditions of the braking system, cause slight changes in its vibrational characteristics thus causing resonance in the high audio-frequency range. Dynamic mechanical propertes appear the most likely parameters to be related to a given composition's tendency to promote squeal. Since it was necessary to test under service conditions a review was made of all the available commercial test instruments but as none were suitable it was necessary to design and develop a new instrument. The final instrument design, based on longitudinal resonance, enabled modulus and damping to be determined over a wide range of temperatures and frequencies. This apparatus has commercial value since it is not restricted to friction material testing. Both used and unused pads were tested and although the cause of brake squeal was not definitely established, the results enabled formulation of a tentative theory of the possible conditions for brake squeal. The presence of a temperature of minimum damping was indicated which may be of use to braking design engineers. Some auxilIary testing was also performed to establish the effect of water, oil and brake fluid and also to determine the effect of the various components of friction materials.

A Comparison Between Graphene and WS2 as Solid Lubricant Additives to Aluminum for Automobile Applications

The purpose of this thesis was to compare graphene nanoplatelets (GNP) and WS2 as solid lubricant additives to aluminum in order to reduce friction and wear. The central hypothesis of this work relied on lubricating properties of 2D materials, which consist layers that slip under a shear force. Two aluminum composites were made (Al-2 vol.% GNP and Al-2 vol.% WS2) by spark plasma sintering. Tribological properties were evaluated by ball-on-disk wear tests at room temperature (RT) and 200°C. WS2 not only presented the lowest COF (0.66) but also improved the wear resistance of aluminum by 54% at RT. Al-2 vol.% GNP composite displayed poor densification (91%) and low hardness resulting in poor wear resistance. The wear rate of Al-2 vol.% GNP composite increased by 233% at RT and 48% at 200°C as compared to pure aluminum. GNP addition also resulted in lower COF (0.79) as compared to pure aluminum (0.87).

Pricing Automobile Fuel Economy : A New Hedonic Approach

Publisher PDF

Les IgG et les IgE spécifiques aux isocyanates chez les apprentis en carrosserie automobile à risque de développer de l'asthme professionnel

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Les IgG et les IgE spécifiques aux isocyanates chez les apprentis en carrosserie automobile à risque de développer de l'asthme professionnel

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

AUTO-RUINS. Thinks about automobile into the contemporary landscape

The article analyses the evolution of the representation of the automobile inserted in the natural and urban environment in the Contemporary Art, from the appearance of the first cars in the beginning of the 20th century until the present day. The text compares the diverse attitudes and analysis of some representative artists who have used the image of the machine in general and the car in particular in their aesthetic discourse, using as a conductive thread the metaphor of the life cycle (birth, growth, feeding, reproduction and death). It deals with the discovery, the development and the coexistence between human and the automobile and its interpretation as a basic element of the artistic work. The text connects the image of the automobile located in the contemporary industrial landscape utilizing the artist references who have integrated the car in their work inside the natural or artificial environment characteristic of each moment. At the same time, the article goes deeply into the relationship of romantic ruin and natural landscape and the evolution of the industrial and architectural modern environment, through the work of the artists who has used the car as an inhabitant of the landscape.

Recovery of palladium from a spent automobile catalyst leaching solution by a thiodiglycolamide derivative

In the sequence of previous research on the development of novel liquid-liquid amidetype compounds to efficiently and selectively extract platinum-group metals (PGMs) from concentrated hydrochloric acid media, a specific thiodiglycolamide derivative – N,N’-dimethyl-N,N’-dicyclohexylthiodiglycolamide (DMDCHTDGA) – has been applied for the recovery of palladium(II) from a spent automobile catalyst leaching solution, containing palladium(II) and rhodium(III) as PGMs. The results obtained are rather promising, since the DMDCHTDGA behavior towards the two PGMs is similar to that observed for hydrochloric acid aqueous media studied before, simulating the real leaching phases. Within eleven metal elements co-existing in solution, the majority in high fold-excesses, only aluminum(III) and cerium(III) interfere in the palladium(II) liquid-liquid extraction process, requiring further optimization.

A golden anniversary, 1895-1945. Personal side lights of America's first automobile race.

Mode of access: Internet.

B2C Digital business presence in the automobile industry

The purpose of this work is to investigate the digital online- and website- presence of the international automobile industry. The focus is on the business-to-consumer area to find out how digital communication is designed and if there are differences in the design dependent on the type of company or its cultural origin. The research is based on different quantitative as well as qualitative studies. After the selection and validation of the test sample, a qualitative content analysis for each corporate website in the test sample is conducted. Then, an extensive quantitative content analysis is applied. In a third step interviews with nine different experts from different sectors of the automobile company are carried out to validate the previous findings and obtain deeper insights. All of the findings are statistically analyzed and comprehensively evaluated.

Online presence of the international automobile industry: evaluation of the digital business representation in the business to consumer section of the international automobile industry

Tesis inédita presentada en la Universidad Europea de Madrid. Facultad de Ciencias Sociales. Programa de Doctorado en Economía y Empresa