Leaf orientation, incident sunlight, and photosynthesis in the alpine species Suassurea superba and Gentiana straminea on the Qinghai-Tibet Plateau

The extremely high level of solar radiation on the Qinghai-Tibet Plateau may induce photoinhibition and thus limit leaf carbon gain. To assess the effect of high light, we examined gas exchange and chlorophyll fluorescence for two species differing in light interception: the prostrate Saussurea superba and the erect-leaved Gentiana straminea. In controlled conditions with favorable water and temperature, neither species showed apparent photoinhibition in gas exchange measurements. In natural environment, however, their photosynthetic rate decreased remarkably at high light. Photosynthesis depression was aggravated under high leaf temperature or soil water stress. Relative stomatal limitation was much higher in S. superba than in G. straminea and it remarkably increased in the later species at midday when soil was dry. F-v/F-m as an indicator for photoinhibition was generally higher in S. superba than in the other species. F-v/F-m decreased significantly under high light at midday in both species, even when soil moisture was high. F-0 linearly elevated with the increment of leaf temperature in G. straminea, but remained almost constant in S. superba. Electron transport rate (ETR) increased with photosynthetically active photon flux density (PPFD) in S. superba, but declined when PPFD was high than about 1000 mumol m(-2) s(-1) in G. straminea. Compared to favorable environment, the estimated daily leaf carbon gain at PPFD above 800 mumol m(-2) s(-1) was reduced by 32% in S. superba and by 17% in G. straminea when soil was moist, and by 43% and 53%, respectively, when soil was dry. Our results suggest that the high radiation induces photoinhibition and significantly limits photosynthetic carbon gain, and the limitation may further increase at higher temperature and in dry soil.

Theoretical study of determining orientation and alignment of symmetric top molecule using laser-induced fluorescence

General expressions used for extracting the orientation and alignment parameters of a symmetric top molecule from laser-induced fluorescence (LIF) intensity are derived by employing the density matrix approach. The molecular orientation and alignment are described by molecular state multipoles. Excitation and detection are circularly and linearly polarized lights, respectively. In general cases, the LIF intensity is a complex function of the initial molecular state multipoles, the dynamic factors and the excitation-detection geometrical factors. It contains a population, ten orientation and fourteen alignment multipoles. The problem of how to extract the initial molecular state multipoles from the resolved LIF intensity is discussed.

异文化圈社会规范层次结构模型的比较研究

The relationship between the management and the culture was explored from the view of social norm's theory. In concrete terms, the differences of the hierarchical structure of the social norm among the Chinese, the Japanese and the American were studied systematically by using interview, case study, questionnaire survey and the structure equation model, etc. The results were: (1) The basic two types of the social norms of the Chinese, the American and the Japanese were the same: the external control norm and the internal control norm. The basic dimensions of the two types of norms composed of moral principle, value orientation, the law and the rules, and the social custom were consistent among the three countries. Furthermore, the dimensions of social norms were hierarchical because of the functioning of the different culture, which consisted of the hierarchical structure system. (2) Although there were the same dimensions among the three countries, the contents of these dimensions had both the common norms surpassing the specific culture and the particular norms depending on the specific culture. (3) The basic structures of the social norms in China and in Japan were the same: the internal control norms played a main role and the external control norm was auxiliary. On one hand, within the internal norm of the Chinese, the moral principle was the main force while the value orientation was the supplementary; within the external norm, the law and the rules was the main force while the social culture custom was supplementary. On the other hand, the relationship between the external and the internal dimensions of the Japanese turned out to be contrary to those of the Chinese. (4) The structure of the American social norms were different from the Chinese: for the American, the external control norm played a main role while the internal control norm was assistant. Furthermore, the law and the rule was the major aspect while the social costumes was the second in the external control dimension. In addition, the value orientation led the performance style of the American, while the moral principle played the second role in the internal control structure. (5) The social norms related to the management performance were found including work responsibility, organization commitment, meeting making-decision, communication style, work duty and interpersonal conflict by inventory and case study. The mangers from China, Japan and America had significant different views on paying attention to the management norms. In a word, the culture differences of the social norm were the fundamental reason of the management conflict.

Spatial Reference Frames for Object Recognition: Tuning for Rotations in Depth

The inferior temporal cortex (IT) of monkeys is thought to play an essential role in visual object recognition. Inferotemporal neurons are known to respond to complex visual stimuli, including patterns like faces, hands, or other body parts. What is the role of such neurons in object recognition? The present study examines this question in combined psychophysical and electrophysiological experiments, in which monkeys learned to classify and recognize novel visual 3D objects. A population of neurons in IT were found to respond selectively to such objects that the monkeys had recently learned to recognize. A large majority of these cells discharged maximally for one view of the object, while their response fell off gradually as the object was rotated away from the neuron"s preferred view. Most neurons exhibited orientation-dependent responses also during view-plane rotations. Some neurons were found tuned around two views of the same object, while a very small number of cells responded in a view- invariant manner. For five different objects that were extensively used during the training of the animals, and for which behavioral performance became view-independent, multiple cells were found that were tuned around different views of the same object. No selective responses were ever encountered for views that the animal systematically failed to recognize. The results of our experiments suggest that neurons in this area can develop a complex receptive field organization as a consequence of extensive training in the discrimination and recognition of objects. Simple geometric features did not appear to account for the neurons" selective responses. These findings support the idea that a population of neurons -- each tuned to a different object aspect, and each showing a certain degree of invariance to image transformations -- may, as an assembly, encode complex 3D objects. In such a system, several neurons may be active for any given vantage point, with a single unit acting like a blurred template for a limited neighborhood of a single view.

Tense, Aspect and the Cognitive Representation of Time

This paper explores the relationships between a computation theory of temporal representation (as developed by James Allen) and a formal linguistic theory of tense (as developed by Norbert Hornstein) and aspect. It aims to provide explicit answers to four fundamental questions: (1) what is the computational justification for the primitive of a linguistic theory; (2) what is the computational explanation of the formal grammatical constraints; (3) what are the processing constraints imposed on the learnability and markedness of these theoretical constructs; and (4) what are the constraints that a linguistic theory imposes on representations. We show that one can effectively exploit the interface between the language faculty and the cognitive faculties by using linguistic constraints to determine restrictions on the cognitive representation and vice versa. Three main results are obtained: (1) We derive an explanation of an observed grammatical constraint on tense?? Linear Order Constraint??m the information monotonicity property of the constraint propagation algorithm of Allen's temporal system: (2) We formulate a principle of markedness for the basic tense structures based on the computational efficiency of the temporal representations; and (3) We show Allen's interval-based temporal system is not arbitrary, but it can be used to explain independently motivated linguistic constraints on tense and aspect interpretations. We also claim that the methodology of research developed in this study??oss-level" investigation of independently motivated formal grammatical theory and computational models??a powerful paradigm with which to attack representational problems in basic cognitive domains, e.g., space, time, causality, etc.

The effect of market and learning orientation on strategy dynamics : The contributing effect of organisational change capability

McGuinness, T. and Morgan, R. (2005). The effect of market and learning orientation on strategy dynamics: The contributing effect of organisational change capability. European Journal of Marketing. 39(11-12), pp.1306-1326 RAE2008

Teaching English tense and aspect with the help of cognitive grammar: An empirical study

Form-focused instruction is usually based on traditional practical/pedagogical grammar descriptions of grammatical features. The comparison of such traditional accounts with cognitive grammar (CG) descriptions seems to favor CG as a basis of pedagogical rules. This is due to the insistence of CG on the meaningfulness of grammar and its detailed analyses of the meanings of particular grammatical features. The differences between traditional and CG rules/descriptions are exemplified by juxtaposing the two kinds of principles concerning the use of the present simple and present progressive to refer to situations happening or existing at speech time. The descriptions provided the bases for the instructional treatment in a quasi-experimental study exploring the effectiveness of using CG descriptions of the two tenses, and of their interplay with stative (imperfective) and dynamic (perfective) verbs, and comparing this effectiveness with the value of grammar teaching relying on traditional accounts found in standard pedagogical grammars. The study involved 50 participants divided into three groups, with one of them constituting the control group and the other two being experimental ones. One of the latter received treatment based on CG descriptions and the other on traditional accounts. CG-based instruction was found to be at least moderately effective in terms of fostering mostly explicit grammatical knowledge and its effectiveness turned out be comparable to that of teaching based on traditional descriptions.

Psychosocial well-being of African migrant children in Ireland: a cultural orientation

This thesis explores the psychosocial wellbeing of sub-Saharan African migrant children in Ireland. A sociocultural ecological (Psychosocial Working Group, 2003) and resilience lens (Masten & Obradovic, 2008; Ungar, 2011) is used to analyse the experiences of African migrant children in Ireland. The research strategy employs a mixed-methods design, combining both an etic and emic perspective. Grounded theory inquiry (Strauss and Corbin, 1994) explores the experiences of African migrant children in Ireland by drawing on multi-sited observations over a period of six months in 2009, and on interviews and focus group discussions conducted with African children (aged 13-18), mothers and fathers. An emically derived ‘African Migrant Child Psychosocial Well-being’ scale was developed by drawing on data gathered through rapid ethnographic (RAE) free listing exercises carried out in Cork, Dublin and Dundalk with sixty-one participants (N=21 adults, N=28 15-18-year-olds, N=12 12-14-year-olds) and three African community key informants to elicit local understandings of psychosocial well-being. This newly developed scale was used alongside standardised measures of well-being to quantitatively measure the psychosocial adjustment of 233 African migrant children in Cork, Dublin and Dundalk aged 11-18. Findings indicate that the psychosocial wellbeing of the study population is satisfactory when benchmarked against the psychosocial health profile of Irish youth (Dooley & Fitzgerald, 2012). These findings are similar to trends reported in international literature in this field (Georgiades et al., 2006; Gonneke, Stevens, Vollebergh, 2008; Sampson et al., 2005). Study findings have implications for advancing psychosocial research methods with non-Western populations and on informing the practice of Irish professionals, mainly in the areas of teaching, psychology and community work.

Orthogonal orientation control of carbon nanotube growth.

Carbon nanotubes (CNTs) have attracted attention for their remarkable electrical properties and have being explored as one of the best building blocks in nano-electronics. A key challenge to realize such potential is the control of the nanotube growth directions. Even though both vertical growth and controlled horizontal growth of carbon nanotubes have been realized before, the growth of complex nanotube structures with both vertical and horizontal orientation control on the same substrate has never been achieved. Here, we report a method to grow three-dimensional (3D) complex nanotube structures made of vertical nanotube forests and horizontal nanotube arrays on a single substrate and from the same catalyst pattern by an orthogonally directed nanotube growth method using chemical vapor deposition (CVD). More importantly, such a capability represents a major advance in controlled growth of carbon nanotubes. It enables researchers to control the growth directions of nanotubes by simply changing the reaction conditions. The high degree of control represented in these experiments will surely make the fabrication of complex nanotube devices a possibility.

Hannah Arendt's Theory of Political Judgment

Hannah Arendt's theory of political judgment has been an ongoing perplexity among scholars who have written on her. As a result, her theory of judgment is often treated as a suggestive but unfinished aspect of her thought. Drawing on a wider array of sources than is commonly utilized, I argue that her theory of political judgment was in fact the heart of her work. Arendt's project, in other words, centered around reestablishing the possibility of political judgment in a modern world that historically has progressively undermined it. In the dissertation, I systematically develop an account of Arendt's fundamentally political and non-sovereign notion of judgment. We discover that individual judgment is not arbitrary, and that even in the complex circumstances of the modern world there are valid structures of judgment which can be developed and dependably relied upon. The result of this work articulates a theory of practical reason which is highly compelling: it provides orientation for human agency which does not rob it of its free and spontaneous character; shows how we can improve and cultivate our political judgment; and points the way toward the profoundly intersubjective form of political philosophy Arendt ultimately hoped to develop.

Multilevel mesh partitioning for optimising aspect ratio

Multilevel algorithms are a successful class of optimisation techniques which address the mesh partitioning problem. They usually combine a graph contraction algorithm together with a local optimisation method which refines the partition at each graph level. To date these algorithms have been used almost exclusively to minimise the cut-edge weight, however it has been shown that for certain classes of solution algorithm, the convergence of the solver is strongly influenced by the subdomain aspect ratio. In this paper therefore, we modify the multilevel algorithms in order to optimise a cost function based on aspect ratio. Several variants of the algorithms are tested and shown to provide excellent results.

Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors

An investigation into predicting failure of pneumatic conveyor pipe bends due to hard solid particle impact erosion has been carried out on an industrial scale test rig. The bend puncture point locations may vary with many factors. However, bend orientation was suspected of being a main factor due to the biased particle distribution pattern of a high concentration flow. In this paper, puncture point locations have been studied with different pipe bend orientations and geometry (a solids loading ratio of 10 being used for the high concentration flow). Test results confirmed that the puncture point location is indeed most significantly influenced by the bend orientation (especially for a high concentration flow) due to the biased particle distribution and biased particle flux distribution.

Influence of megasonic agitation on the electrodeposition of high aspect ratio blind vias

This paper presents preliminary studies in electroplating using megasonic agitation to avoid the formation of voids within high aspect ratio microvias that are used for the redistribution of interconnects in high density interconnection technology in printed circuit boards. Through this technique, uniform deposition of metal on the side walls of the vias is possible. High frequency acoustic streaming at megasonic frequencies enables the decrease of the Nernst diffusion layer down to the sub-micron range, allowing thereby conformal electrodeposition in deep grooves. This effect enables the normally convection free liquid near the surface to be agitated. Higher throughput and better control of the material properties of the deposits can be achieved for the manufacturing of embedded interconnections and metal-based MEMS. For optimal filling performance of the microvias, a full design of experiments (DOE) and a multi-physics numerical simulation have been conducted to analyse the influence of megasonic agitation on the plating quality of the microvias. Megasonic based deposition has been found to increase the deposition rate as well as improving the quality of the metal deposits.