Micro-Raman and photoluminescence studies of self-assembled quantum well microtubes on GaAs substrate

The Semiconductor Quantum Well (QW) microtubes have been fabricated by strain-induced self assembling technique. Three types of multilayer structures have consisted of GaAs/InxGa1-xAs strained layers containing with various thickness of Monolayers of (GaAs/AlGaAs) QW were grown by Varian Gen II Molecular Beam Epitaxy (MBE) on the GaAs (100) substrate. The shape of the rolled up microtubes provide a clear idea about the formation of three dimensional micro- and nanostructures. Micro-Raman and photoluminescence (PL) studies were performed to the QW microtubes and as compared with their grown area on the GaAs substrate. The results of Raman spectra show the frequency shift of phonon modes measured in tube and compared with the grown area due to residual strain. The PL peaks of the microtube were red-shifted due to the strain effect and transition of bandgap from Type-II to Type-I. (C) 2013 Elsevier B.V. All rights reserved.

Seismic microzonation of a nuclear power plant site with detailed geotechnical, geophysical and site effect studies

This paper highlights the seismic microzonation carried out for a nuclear power plant site. Nuclear power plants are considered to be one of the most important and critical structures designed to withstand all natural disasters. Seismic microzonation is a process of demarcating a region into individual areas having different levels of various seismic hazards. This will help in identifying regions having high seismic hazard which is vital for engineering design and land-use planning. The main objective of this paper is to carry out the seismic microzonation of a nuclear power plant site situated in the east coast of South India, based on the spatial distribution of the hazard index value. The hazard index represents the consolidated effect of all major earthquake hazards and hazard influencing parameters. The present work will provide new directions for assessing the seismic hazards of new power plant sites in the country. Major seismic hazards considered for the evaluation of the hazard index are (1) intensity of ground shaking at bedrock, (2) site amplification, (3) liquefaction potential and (4) the predominant frequency of the earthquake motion at the surface. The intensity of ground shaking in terms of peak horizontal acceleration (PHA) was estimated for the study area using both deterministic and probabilistic approaches with logic tree methodology. The site characterization of the study area has been carried out using the multichannel analysis of surface waves test and available borehole data. One-dimensional ground response analysis was carried out at major locations within the study area for evaluating PHA and spectral accelerations at the ground surface. Based on the standard penetration test data, deterministic as well as probabilistic liquefaction hazard analysis has been carried out for the entire study area. Finally, all the major earthquake hazards estimated above, and other significant parameters representing local geology were integrated using the analytic hierarchy process and hazard index map for the study area was prepared. Maps showing the spatial variation of seismic hazards (intensity of ground shaking, liquefaction potential and predominant frequency) and hazard index are presented in this work.

Quantitative Strain and Compositional Studies of InxGa1-xAs Epilayer in a GaAs-based pHEMT Device Structure by TEM Techniques

In GaAs-based pseudomorphic high-electron mobility transistor device structures, strain and composition of the InxGa1 (-) As-x channel layer are very important as they influence the electronic properties of these devices. In this context, transmission electron microscopy techniques such as (002) dark-field imaging, high-resolution transmission electron microscopy (HRTEM) imaging, scanning transmission electron microscopy-high angle annular dark field (STEM-HAADF) imaging and selected area diffraction, are useful. A quantitative comparative study using these techniques is relevant for assessing the merits and limitations of the respective techniques. In this article, we have investigated strain and composition of the InxGa1 (-) As-x layer with the mentioned techniques and compared the results. The HRTEM images were investigated with strain state analysis. The indium content in this layer was quantified by HAADF imaging and correlated with STEM simulations. The studies showed that the InxGa1 (-) As-x channel layer was pseudomorphically grown leading to tetragonal strain along the 001] growth direction and that the average indium content (x) in the epilayer is similar to 0.12. We found consistency in the results obtained using various methods of analysis.

Studies on the effects of varying secondary gas properties in a low entrainment ratio supersonic ejector

A dilution cum purge ejector for application in fuel cells represents a domain of ejector operation involving low entrainment ratio with differing secondary and primary gas; which is hardly investigated and a cohesive design framework is not readily available. We comprehensively study a constant area ejector using analytical, experimental and numerical tools at low entrainment ratio (0.004-0.065) with Air, Helium and Argon as secondary gas while the primary gas is Air. For the first time, limits of operating parameters used in control volume method to design the ejector are found to be highly dependent on the secondary molecular weight. The entrainment ratio in the ejector (low for Helium and high for Argon) is affected by the molecular weight and the static pressure within the ejector (low for Air and high for Argon & Helium) by the gamma of the secondary gas. Sufficient suction pressure (0.3-0.55 bar) is generated by the ejector thereby preventing any backflow of secondary gas at all primary stagnation pressures (1.5, 2.2 and 3.1 bar). Numerical results agree well with experimental results. The ejector is shown to completely dilute and purge the secondary flow, meeting all key design requirements. (C) 2014 Elsevier Ltd. All rights reserved.

Appraisal of groundwater resource in Holocene soil deposits by resistivity, hydrochemical and granulomerial studies in the Gulf of Mannar Coast from Southern India

This article is aimed to delineate groundwater sources in Holocene deposits area in the Gulf of Mannar Coast from Southern India. For this purpose 2-D electrical resistivity tomography (ERT), hydrochemical and granulomerical studies were carried out and integrated to identify hydrogeological structures and portable groundwater resource in shallow depths which in general appears in the coastal tracts. The 2-D ERT was used to determine the two-dimensional subsurface geological formations by multicore cable with Wenner array. Low resistivity of 1-5 Omega m for saline water appeared due to calcite at the depth of about 5 m below the ground level (bgl). Sea water intrusion was observed around the maximum resistivity as 5 Omega m at the 8 m depth, bgl in the calcite environs, but the calcareous sandstone layer shows around 15-64 Omega m at the 6 m depth, bgl. The hydrochemical variation of TDS, HCO3-, Cl-, Na+, K+, Ca2+, and Mg2+ concentrations was observed for the saline and sea water intrusion in the groundwater system. The granulometic analysis shows that the study area was under the sea between 5400 and 3000 year ago. The events of ice melting an unnatural ice-stone rain/hail among 5000-4000 years ago resulted in the inundation of sea over the area and deposits of late Holocene marine transgression formation up to Puthukottai quartzite region for a stretch of around 17 km.

Experimental Studies of the Material Properties of the Forewing of Cicada (Homoptera, Cicadidae)

Detailed investigations on the structural and mechanical properties of the forewing of the cicada were carried out. Measurement of the structures of the wings showed that the thickness of the membrane of each cell and the diameter of each vein were non-uniform in both the longitudinal and transverse directions, and their means were approximately 12.2 and 133.3 mum, respectively. However, the aspect ratios of the wings and the bodies were quite uniform and were approximately equal to 2.98 and 2.13, respectively. Based on the measured thickness, mass and area of the membranes of the cells, the mean density and the mean area density of the wing were approximately 2.3 g cm(-3) and 2.8 x 10(-3) g cm(-2), respectively. In addition, the diameters of the veins of the wings, including the diameters of the holes in the vein of the leading edge, were examined. The mechanical properties of the wing were investigated separately by nanoindentation and tensile testing. The results indicated that the mean Young's modulus, hardness and yield stress of the membranes of the wings were approximately 3.7 Gpa, 0.2 Gpa and 29 Mpa, respectively, and the mean Young's modulus and strength of the veins along the direction of the venation of wings were approximately 1.9 Gpa and 52 Mpa, respectively. Finally, the relevant results were briefly analyzed and discussed, providing a guideline to the biomimetic design of the aerofoil materials of micro air vehicles.

An overview of air-sea interface process studies

Recent progress in the study of air-sea interface processes for momentum, heat, moisture and mass transfer are reviewed in the present article. Except for turbulent structure, we have analysed the other physical mechanisms occurring in the wave boundary layer, such as the roles of the sea surface state, droplets and bubbles due to wave breaking, which at least partly account for the existing discrepancies between theory and observations. The experiments, both over the ocean and in the laboratory, are described briefly. In conclusion, a few perspective trends in this area are suggested for further investigation.

Studies on terrestrial interface processes in arid areas, China

In the present paper, we have elucidated the importance of energy and water cycling in arid areas to investigate global climate and local economics. Then, we were concerned with the physical arguments as how to stratify the soil, and the stability of the numerical scheme in the mathematical model for predicting temperature variation and water motion. Furthermore, we discuss the methods to estimate evaporation in arid areas. Numerical simulation of energy and water cycling at the Acsu Observatory, CAS, Xinjiang province and Shapuotou Observatory, CAS, Ningxia Province are conducted as case studies. The results show that the laws of terrestrial processes are rather typical in these arid areas. Planting drought-endurable trees can alleviate unfavourable conditions to a certain extent. (C) 1997 Academic Press Limited.

Summary report on water quantity and quality studies of Vancouver Lake, Washington

Vancouver Lake, located adjacent to the Columbia River and just north of the Vancouver-Portland metropolitan area, is a "dying" lake. Although all lakes die naturally in geologic time through the process of eutrophication,* Vancouver Lake is dying more rapidly due to man's activities and due to the resultant increased accumulation of sediment, chemicals, and wastes. Natural eutrophication takes thousands of years, whereas man-made modifications can cause the death of a lake in decades. Vancouver Lake does, however, have the potential of becoming a valuable water resource asset for the area, due particularly to its location near the Columbia River which can be used as a source of "flushing" water to improve the quality of Vancouver Lake. (Document pdf contains 59 pages) Community interest in Vancouver Lake has waxed and waned. Prior to World War II, there were relatively few plans for discussions about the Lake and its surrounding land area. A plan to drain the Lake for farming was prohibited by the city council and county commissioners. Interest increased in 1945 when the federal government considered developing the Lake as a berthing harbor for deactivated ships at which time a preliminary proposal was prepared by the City. The only surface water connection between Vancouver Lake and the Columbia River, except during floods, is Lake River. The Lake now serves as a receiving body of water for Lake River tidal flow and surface flow from creeks and nearby land areas. Seasonally, these flows are heavily laden with sediment, septic tank drainage, fertilizers and drainage from cattle yards. Construction and gravel pit operations increase the sediment loads entering the Lake from Burnt Bridge Creek and Salmon Creek (via Lake River by tidal action). The tidal flats at the north end of Vancouver Lake are evidence of this accumulation. Since 1945, the buildup of sediment and nutrients created by man's activities has accelerated the growth of the large water plants and algae which contribute to the degeneration of the Lake. Flooding from the Columbia River, as in 1968, has added to the deposition in Vancouver Lake. The combined effect of these human and natural activities has changed Vancouver Lake into a relatively useless body of shallow water supporting some wildlife, rough fish, and shallow draft boats. It is still pleasant to view from the hills to the east. Because precipitation and streamflow are the lowest during the summer and early fall, water quantity and quality conditions are at their worst when the potential of the Lake for water-based recreation is the highest. Increased pollution of the Lake has caused a larger segment of the community to become concerned. Land use and planning studies were undertaken on the Columbia River lowlands and a wide variety of ideas were proposed for improving the quality of the water-land environment in order to enhance the usefulness of the area. In 1966, the College of Engineering Research Division at Washington State University (WSU0 in Pullman, Washington, was contacted by the Port of Vancouver to determine possible alternatives for restoring Vancouver Lake. Various proposals were prepared between 1966 and 1969. During the summer and fall of 1967, a study was made by WSU on the existing water quality in the Lake. In 1969, the current studies were funded to establish a data base for considering a broad range of alternative solutions for improving the quantity and quality of Vancouver Lake. Until these studies were undertaken, practically no data on a continuous nature were available on Vancouver Lake, Lake River, or their tributaries. (Document pdf contains 59 pages)

Miscellaneous studies

MISCELLANEOUS STUDIES, which includes the following papers: "Geology of the Area in and Around the Jim Woodruff Reservoir" by Charles W. Hendry, Jr. and J. William Yon, Jr.; "Phosphate Concentrations near Bird Rookeries in South Florida" by Dr. Ernest H. Lund, Department of Geology, Florida State University; and "An Analysis of Ochlockonee River Channel Sediments" by Dr. Ernest H. Lund, Associate Professor and Patrick C. Haley, Graduate Assistant, Department of Geology, Florida State University. (PDF contains 81 pages)

Submarine landslides : selected studies in the U.S. Exclusive Economic Zone

Submarine Landslides: An Introduction 1 By RIo Lee, W.C. Schwab, and J.S. Booth U.S. Atlantic Continental Slope Landslides: Their Distribution, General Anributes, and Implications 14 By J.S. Booth, D.W. O'Leary, Peter Popenoe, and W.W. Danforth Submarine Mass Movement, a Formative Process of Passive Continental Margins: The Munson-Nygren Landslide Complex and the Southeast New England Landslide Complex 23 By D.W. O'Leary The Cape Fear Landslide: Slope Failure Associated with Salt Diapirism and Gas Hydrate Decomposition 40 By Peter Popenoe, E.A. Schmuck, and W.P. Dillon Ancient Crustal Fractures Control the Location and Size of Collapsed Blocks at the Blake Escarpment, East of Florida 54 By W.P. Dillon, J.S. Risch, K.M. Scanlon, P.C. Valentine, and Q.J. Huggett Tectonic and Stratigraphic Control on a Giant Submarine Slope Failure: Puerto Rico Insular Slope 60 By W.C. Schwab, W.W. Danforth, and K.M. Scanlon Slope Failure of Carbonate Sediment on the West Florida Slope 69 By D.C. Twichell, P.C. Valentine, and L.M. Parson Slope Failures in an Area of High Sedimentation Rate: Offshore Mississippi River Delta 79 By J.M. Coleman, D.B. Prior, L.E. Garrison, and H.J. Lee Salt Tectonics and Slope Failure in an Area of Salt Domes in the Northwestern Gulf of Mexico 92 By B.A. McGregor, R.G. Rothwell, N.H. Kenyon, and D.C. Twichell Slope Stability in Regions 01 Sea-Floor Gas Hydrate: Beaufort Sea Continental Slope 97 By R.E. Kayen and H.J. Lee Mass Movement Related to Large Submarine Canyons Along the Beringian Margin, Alaska 104 By P.R. Carlson, H.A. Karl, B.D. Edwards, J.V. Gardner, and R. Hall Comparison of Tectonic and Stratigraphic Control of Submarine Landslides on the Kodiak Upper Continental Slope, Alaska 117 By M.A. Hampton Submarine Landslides That Had a Significant Impact on Man and His Activities: Seward and Valdez, Alaska 123 By M.A. Hampton, R.W. Lemke, and H.W. Coulter Processes Controlling the Style of Mass Movement in Glaciomarine Sediment: Northeastern Gulf of Alaska 135 By W.C. Schwab and H.J. Lee Contents V VI Contents Liquefaction of Continental Shelf Sediment: The Northern California Earthquake of 1980 143 By M.E. Field A Submarine Landslide Associated with Shallow Sea-Floor Gas and Gas Hydrates off Northern California 151 By M.E. Field and J.H. Barber, Jr. Sur Submarine Landslide, a Deep-Water Sediment Slope Failure 158 By C.E. Gutmacher and W.R. Normark Seismically Induced Mudflow in Santa Barbara Basin, California 167 By B.D. Edwards, H.J. Lee, and M.E. Field Submarine Landslides in a Basin and Ridge Setting, Southern California 176 By M.E. Field and B.D. Edwards Giant Volcano-Related Landslides and the Development of the Hawaiian Islands 184 By W.R. Normark, J.G. Moore, and M.E. Torresan Submarine Slope Failures Initiated by Hurricane Iwa, Kahe Point, Oahu, Hawaii 197 By W.R. Normark, Pat Wilde, J.F. Campbell, T.E. Chase, and Bruce Tsutsui (PDF contains 210 pages)

Fish Habitat Utilization Patterns and Evaluation of the Efficacy of Marine Protected Areas in Hawaii: Integration of NOAA Digital Benthic Habitat Mapping and Coral Reef Ecological Studies

Over the past four decades, the state of Hawaii has developed a system of eleven Marine Life Conservation Districts (MLCDs) to conserve and replenish marine resources around the state. Initially established to provide opportunities for public interaction with the marine environment, these MLCDs vary in size, habitat quality, and management regimes, providing an excellent opportunity to test hypotheses concerning marine protected area (MPA) design and function using multiple discreet sampling units. NOAA/NOS/NCCOS/Center for Coastal Monitoring and Assessment’s Biogeography Team developed digital benthic habitat maps for all MLCD and adjacent habitats. These maps were used to evaluate the efficacy of existing MLCDs for biodiversity conservation and fisheries replenishment, using a spatially explicit stratified random sampling design. Coupling the distribution of habitats and species habitat affinities using GIS technology elucidates species habitat utilization patterns at scales that are commensurate with ecosystem processes and is useful in defining essential fish habitat and biologically relevant boundaries for MPAs. Analysis of benthic cover validated the a priori classification of habitat types and provided justification for using these habitat strata to conduct stratified random sampling and analyses of fish habitat utilization patterns. Results showed that the abundance and distribution of species and assemblages exhibited strong correlations with habitat types. Fish assemblages in the colonized and uncolonized hardbottom habitats were found to be most similar among all of the habitat types. Much of the macroalgae habitat sampled was macroalgae growing on hard substrate, and as a result showed similarities with the other hardbottom assemblages. The fish assemblages in the sand habitats were highly variable but distinct from the other habitat types. Management regime also played an important role in the abundance and distribution of fish assemblages. MLCDs had higher values for most fish assemblage characteristics (e.g. biomass, size, diversity) compared with adjacent fished areas and Fisheries Management Areas (FMAs) across all habitat types. In addition, apex predators and other targeted resources species were more abundant and larger in the MLCDs, illustrating the effectiveness of these closures in conserving fish populations. Habitat complexity, quality, size and level of protection from fishing were important determinates of MLCD effectiveness with respect to their associated fish assemblages. (PDF contains 217 pages)

Caribbean connectivity: implications for Marine Protected Area Management. Proceedings of a Special Symposium, 9-11 November 2006, 59th Annual Meeting of the Gulf and Caribbean Fisheries Institute, Belize City, Belize

Executive Summary: Tropical marine ecosystems in the Caribbean region are inextricably linked through the movement of pollutants, nutrients, diseases, and other stressors, which threaten to further degrade coral reef communities. The magnitude of change that is occurring within the region is considerable, and solutions will require investigating pros and cons of networks of marine protected areas (MPAs), cooperation of neighboring countries, improved understanding of how external stressors degrade local marine resources, and ameliorating those stressors. Connectivity can be broadly defined as the exchange of materials (e.g., nutrients and pollutants), organisms, and genes and can be divided into: 1) genetic or evolutionary connectivity that concerns the exchange of organisms and genes, 2) demographic connectivity, which is the exchange of individuals among local groups, and 3) oceanographic connectivity, which includes flow of materials and circulation patterns and variability that underpin much of all these exchanges. Presently, we understand little about connectivity at specific locations beyond model outputs, and yet we must manage MPAs with connectivity in mind. A key to successful MPA management is how to most effectively work with scientists to acquire the information managers need. Oceanography connectivity is poorly understood, and even less is known about the shape of the dispersal curve for most species. Dispersal kernels differ for various systems, species, and life histories and are likely highly variable in space and time. Furthermore, the implications of different dispersal kernels on population dynamics and management of species is unknown. However, small dispersal kernels are the norm - not the exception. Linking patterns of dispersal to management options is difficult given the present state of knowledge. The behavioral component of larval dispersal has a major impact on where larvae settle. Individual larval behavior and life history details are required to produce meaningful simulations of population connectivity. Biological inputs are critical determinants of dispersal outcomes beyond what can be gleaned from models of passive dispersal. There is considerable temporal and spatial variation to connectivity patterns. New models are increasingly being developed, but these must be validated to understand upstream-downstream neighborhoods, dispersal corridors, stepping stones, and source/sink dynamics. At present, models are mainly useful for providing generalities and generating hypotheses. Low-technology approaches such as drifter vials and oceanographic drogues are useful, affordable options for understanding local connectivity. The “silver bullet” approach to MPA design may not be possible for several reasons. Genetic connectivity studies reveal divergent population genetic structures despite similar larval life histories. Historical stochasticity in reproduction and/or recruitment likely has important, longlasting consequences on present day genetic structure. (PDF has 200 pages.)

Studies of the sexual development and spawning of yellowfin tuna, Neothunnus macropterus, and skipjack, Katsuwonus pelamis, in three areas of the Eastern Pacific Ocean, by examination of gonads.

ENGLISH: Knowledge of the size and age at maturity, spawning seasons, and spawning areas of the tropical tunas supporting the fishery in the Eastern Pacific is an important part of the basic information required for understanding their life history, population structure, and fishery dynamics. Until a few years ago nothing was known of these matters. In 1947 the senior author and one of his colleagues (Schaefer and Marr 1948, Schaefer 1948) were able to demonstrate that both yellowfin tuna and skipjack spawn offshore from Central America at least during the late winter and spring months. During January to April many yellowfin tuna over about 70 cm. total length in commercial catches from that region were found to have gonads in advanced stages of maturity, and specimens caught during late June were found to be spent. Maturing skipjack were collected in late February, and spawned-out fish were observed in late March. Numerous very young juveniles of the yellowfin, down to 10 mm. in length, and two very young juvenile skipjack, were captured in this area between January and May. SPANISH: El conocimiento del tamaño y la edad que corresponden a la primera madurez sexual, así como de las estaciones y áreas de desove de los atunes tropicales que mantienen las pesquerías del Pacífico Oriental, constituyen parte importante de la información que es menester para comprender la historia natural, la estructura de la población y la dinámica de la pesquería. Hasta hace pocos años nada se sabía sobre el particular. En 1947 el autor principal y uno de sus colegas (Schaefer y Marr, 1948; Schaefer, 1948) pudieron demostrar que tanto el atún aleta amarilla como el barrilete desovan en el mar abierto, frente a América Central, por lo menos durante la última parte del invierno y en la primavera. De enero a abril encontraron que muchos de los atunes aleta amarilla de más de 70 cm. de longitud total, procedentes de las pescas comerciales de dicha región; tenían gónadas en avanzados estados de madurez, mientras que ejemplares pescados hacia fines de junio ya habían desovado. Se recolectaron barriletes en vías de maduración a fines de febrero, al paso que en los últimos días de marzo se encontraron especímenes que ya habían desovado. Numerosos ejemplares muy juveniles del atún aleta amarilla, tan pequeños como 10 mm., y dos barriletes también muy juveniles, fueron pescados en esta región entre enero y mayo. (PDF contains 65 pages.)

Studies on the Japanese long-line fishery for tuna and marlin in the Eastern Tropical Pacific Ocean during 1963

ENGLISH: During 1963, the area of operation of the Japanese long-line fishery in the eastern Pacific further expanded, and total fishing effort increased. Charts are presented showing the distribution of effort and of catch-rates, by species, for major fishing areas; and showing catch-rates by species, by quarters of the year, by areas of one-degree of latitude and longitude. In the newly-exploited region north of 10°N, yellowfin and striped marlin are principal elements of the catch, while in the newly-fished region south of the former fishing areas, south of about 20°S, albacore dominate in the catch. Continued decline in catch rates of bigeye tuna, associated with increased fishing effort, indicates that there has been a real decrease in abundance of this species, and that it may have resulted from effects of the fishery on the stock. Changes in catch rates of yellowfin tuna seem to be associated with effects on the stock by both the long-line fishery and by the near-surface fishery by purse-seiners and bait-boats. Over the short series of years for which data are available, there are no discernible trends in apparent abundance of striped marlin or albacore. Information is presented concerning seasonal and geographical distributions of spawning yellowfin tuna, based on examination of gonads. Analysis of data on size composition of yellowfin tuna for 1958-1964 indicates that the long-line fishery is becoming increasingly dependent on the most recently recruited year class, further confirming the effect of the fishery on the stock. The long-line fishery now takes nearly all of its catch of yellowfin tuna from two year-classes each year, during their third and fourth years of life. SPANISH: Durante 1963 el área de operación de la pesca palangrera japonesa en el Pacífico oriental se extendió más y se incrementó el esfuerzo total de pesca. Se presentan cartas indicando la distribución del esfuerzo y las tasas de captura por especies, para las áreas principales de pesca; y se muestran las tasas de captura por especies y por trimestres del año en áreas de un grado de latitud y longitud. En la región recientemente explotada al norte de los 10°N, los principales elementos de la captura son el atún aleta amarilla y el marlín rayado, mientras aproximadamente al sur de los 20°S en la región recientemente pescada al sur de las primeras áreas de pesca la albacora predomina en la captura. La continua merma en las tasas de captura del patudo en asociación con el incremento en el esfuerzo de pesca, indica que ha habido una real reducción en la abundancia de esta especie y que puede ser el resultado de los efectos de la pesquería sobre el stock. Los cambios en las tasas de captura del atún aleta amarilla parecen estar asociados con los efectos sobre el stock tanto de la pesquería palangrera como de la pesca de superficie por barcos rederos y de carnada. No hay tendencias perceptibles en la abundancia aparente del marlín rayado o la albacora en el corto período de años de los que se disponen datos. Se presenta información referente a la distribución estacional y geográfica del desove del atún aleta amarilla basado en el examen de las gónadas. El análisis de los datos sobre la composición de tallas del atún aleta amarilla correspondiente a 1958-1964 indica que la pesca palangrera depende cada vez más de las clases anuales recientemente reclutadas, confirmando aún más el efecto que tiene la pesquería sobre el stock. La pesquería palangrera coge casi toda su pesca de atún aleta amarilla de dos clases anuales cada año, durante su tercer y cuarto año de vida. (PDF contains 70 pages.)