An Evaluation of 1D Loss Model Collections for the Off-Design Performance Prediction of an Automotive Turbocharger Compressor

Abstract. Single-zone modelling is used to assess different collections of impeller 1D loss models. Three collections of loss models have been identified in literature, and the background to each of these collections is discussed. Each collection is evaluated using three modern automotive turbocharger style centrifugal compressors; comparisons of performance for each of the collections are made. An empirical data set taken from standard hot gas stand tests for each turbocharger is used as a baseline for comparison. Compressor range is predicted in this study; impeller diffusion ratio is shown to be a useful method of predicting compressor surge in 1D, and choke is predicted using basic compressible flow theory. The compressor designer can use this as a guide to identify the most compatible collection of losses for turbocharger compressor design applications. The analysis indicates the most appropriate collection for the design of automotive turbocharger centrifugal compressors.

A numerical study of automotive turbocharger mixed flow turbine inlet geometry for off design performance

Mixed flow turbines represent a potential solution to the increasing requirement for high pressure, low velocity ratio operation in turbocharger applications. While literature exists for the use of these turbines at such operating conditions, there is a lack of detailed design guidance for defining the basic geometry of the turbine, in particular, the cone angle – the angle at which the inlet of the mixed flow turbine is inclined to the axis. This investigates the effect and interaction of such mixed flow turbine design parameters.
Computational Fluids Dynamics was initially used to investigate the performance of a modern radial turbine to create a baseline for subsequent mixed flow designs. Existing experimental data was used to validate this model.
Using the CFD model, a number of mixed flow turbine designs were investigated. These included studies varying the cone angle and the associated inlet blade angle.
The results of this analysis provide insight into the performance of a mixed flow turbine with respect to cone and inlet blade angle.

Do leaves of plants on phosphorus-impoverished soils contain high concentrations of phenolic defence compounds?

Prominent theories of plant defence have predicted that plants growing on nutrient-poor soils produce more phenolic defence compounds than those on richer soils. Only recently has the Protein Competition Model (PCM) of phenolic allocation suggested that N and P limitation could have different effects because the nutrients are involved in different cellular metabolic processes. 2. We extend the prediction of the PCM and hypothesize that N will have a greater influence on the production of phenolic defensive compounds than P availability, because N limitation reduces protein production and thus competition for phenylalanine, a precursor of many phenolic compounds. In contrast, P acts as a recyclable cofactor in these reactions, allowing protein and hence phenolic production to continue under low P conditions. 3. We test this hypothesis by comparing the foliar concentrations of phenolic compounds in (i) phenotypes of 21 species growing on P-rich alluvial terraces and P-depleted marine terraces in southern New Zealand, and (ii) 87 species growing under similar climates on comparatively P-rich soils in New Zealand vs. P-depleted soils in Tasmania. 4. Foliar P concentrations of plants from the marine terraces were about half those of plants from alluvial soils, and much lower in Tasmania than in New Zealand. However, foliar concentrations of N and phenolic compounds were similar across sites in both comparisons, supporting the hypothesis that N availability is a more important determinant of plant investment in phenolic defensive compounds than P availability. We found no indication that reduced soil P levels influenced plant concentrations of phenolic compounds. There was wide variation in the foliar N and P concentrations among species, and those with low foliar nutrient concentrations produced more phenolics (including condensed tannins). 5. Our study is the first trait comparison extending beyond standard leaf economics to include secondary metabolites related to defence in forest plants, and emphasizes that N and P have different influences on the production of phenolic defence compounds. © 2009 British Ecological Society.

The Evolution of Extreme Cooperation via Shared Dysphoric Experiences

Willingness to lay down one’s life for a group of non-kin, well documented in the
historical and ethnographic records, represents an evolutionary puzzle. Here we
present a novel explanation for the willingness to fight and die for a group, combining evolutionary theorizing with empirical evidence from real-world human groups. Building on research in social psychology, we develop a mathematical model showing how conditioning cooperation on previous shared experience can allow extreme (i.e., life-threatening) pro-social behavior to evolve. The model generates a series of predictions that we then test empirically in a range of special sample populations (including military veterans, college fraternity/sorority members, football fans, martial arts practitioners, and twins). Our results show that sharing painful experiences produces “identity fusion” – a visceral sense of oneness – more so even than bonds of kinship, in turn motivating extreme pro-group behavior, including willingness to fight and die for the group. These findings have theoretical and practical relevance. Theoretically, our results speak to the origins of human cooperation, as we offer an explanation of extremely costly actions left unexplained by existing models.
Practically, our account of how shared dysphoric experiences produce identity fusion, which produces a willingness to fight and die for a non-kin group, helps us better understand such pressing social issues as suicide terrorism, holy wars, sectarian violence, gang-related violence, and other forms of intergroup conflict.

Spirituality and Basketball Fanship: An Interpretative Phenomenological Analysis and Synthesis

The world of competitive sport affords an individual the opportunity to enter a spiritual community adding meaning that transcends one’s current understanding of life (Parry et al. 2007). Previously established dimensions of sports fanship (group affiliation, psychological commitment and team identification) share characteristics commonly associated with religious or spiritual affiliation indicating that fans may generate substantial life meaning from observing sporting encounters. In the present study, 12 male basketball fans (M=32.42; SD=7.97) completed semi-structured interviews immediately prior to viewing a competitive match at the 2011 European Basketball Championships (Vilnius, Lithuania). Interviews were structured under four headings; 1) the most memorable moment as a basketball fan, 2) thoughts, feelings and emotions attached to their team, 3) affiliation to the team in the context of the fan’s meaning of life, 4) connection with members of the fan’s sporting community. Interpretative Phenomenological Analysis was employed to analyse interview transcripts. Raw data clustered into four dimensions; 1) devotion, 2) obscure emotions, 3) connectedness, and 4) universal values. The results indicate that sports fanship is characterised by, and synonymous with, an established understanding of spirituality derived from membership of wider spiritual and/or religious communities. The findings hold implications for the marketing and membership of local, amateur and professional sports clubs and brands, as well as community development, health and welfare.

A computer vision based web application for tracking soccer players

Soccer is a sport where everyone that is involved with it make all the efforts aiming for excellence. Not only the players need to show their skills on the pitch but also the coach, and the remaining staff, need to have their own tools so that they can perform at higher levels. Footdata is a project to build a new web application product for soccer (football), which integrates two fundamental components of this sport's world: the social and the professional. While the former is an enhanced social platform for soccer professionals and fans, the later can be considered as a Soccer Resource Planning, featuring a system for acquisition and processing information to meet all the soccer management needs. In this paper we focus only in a specific module of the professional component. We will describe the section of the web application that allows to analyse movements and tactics of the players using images directly taken from the pitch or from videos, we will show that it is possible to draw players and ball movements in a web application and detect if those movements occur during a game. © 2014 Springer International Publishing.

A computer vision based web application for tracking soccer players

Soccer is a sport where everyone that is involved with it make all the efforts aiming for excellence. Not only the players need to show their skills on the pitch but also the coach, and the remaining staff, need to have their own tools so that they can perform at higher levels. Footdata is a project to build a new web application product for soccer (football), which integrates two fundamental components of this sport’s world: the social and the professional. While the former is an enhanced social platform for soccer professionals and fans, the later can be considered as a Soccer Resource Planning, featuring a system for acquisition and processing information to meet all the soccer management needs. In this paper we focus only in a specific module of the professional component. We will describe the section of the web application that allows to analyse movements and tactics of the players using images directly taken from the pitch or from videos, we will show that it is possible to draw players and ball movements in a web application and detect if those movements occur during a game.

Die Nutzung des Gefällt mir-Buttons auf Organisationsprofilen : eine quantitative Studie zur Erfassung der Nutzungsmotive und des Verlaufs von Gefällt mir-Verknüpfungen zwischen Usern und Organisationen im Online-Netzwerk Facebook

Die Nutzung des Like-Buttons wurde bisher nur oberflächlich und vor allem auf den US-Raum begrenzt erforscht. Dabei lag der Fokus ausschließlich auf wirtschaftlich orientierten Unternehmen und dem monetären Wert, den ein Fan für dieses hat. In der vorliegenden Untersuchung wird eine erweiterte Perspektive gewählt. Aus Sicht deutschsprachiger Nutzer wird erforscht, welche Motive und Bedürfnisse eine Person dazu veranlassen, sich freiwillig per Gefällt-mir zu verknüpfen. Hierzu wird der Uses and Gratifications-Ansatz herangezogen. Es stehen nicht Unternehmen, sondern generell alle Formen von Organisationen im Fokus. Gleichzeitig wird untersucht, wie diese Beziehungen verlaufen: Welche Erwartungen stellen Fans? Welche Handlungen nehmen sie wie häufig vor und welchen Effekt hat eine Fanbeziehung auf die Einstellung eines Nutzers gegenüber einer Organisation? Die Motive hinter der Nutzung des Gefällt mir-Buttons sind umfangreicher, als es bisherige Forschung vermuten ließ. Fans wollen informiert werden, sie wollen ihr Gefallen schnell und einfach bekunden und sich durch die Verknüpfung selbst darstellen. Weniger wichtig, aber dennoch von Relevanz sind die Motive der Partizipation und Unterstützung, der Empfehlung, der Vorteilssuche, der Unterhaltung sowie der Netzwerkerweiterung und Gruppenzugehörigkeit. Die Verwendung des Like-Buttons dient somit der Befriedigung einer ganzen Reihe von Nutzungsbedürfnissen. Der Verlauf der Beziehungen zwischen Organisationen und Usern ist eher von Passivität geprägt. Fans wollen zwar informiert werden und stellen konkrete Ansprüche an die Art und Form von Organisationsmeldungen, sie wollen aber nur selten wirklich direkt mit einem Unternehmen, einem Verein o.ä. interagieren. Langweilen die Meldungen einer Organisation, werden zu viele oder nicht relevante Informationen an die Fans weitergeben, zögern diese nicht, eine Verknüpfung zu beenden. Ein Effekt der Fanschaft auf die Einstellung von Nutzern gegenüber der jeweiligen Organisation konnte nur bedingt festgestellt werden. Letztere zieht einen Gewinn nicht aus einer erhöhten Ausgabebereitschaft seiner Fans, sondern aus deren stärkerer Aufmerksamkeit gegenüber Organisationsmeldungen.

Prédiction de la digestibilité des acides aminés des ingrédients utilisés en alimentation porcine : approche par méta-analyse

En alimentation animale, l’utilisation adéquate des aliments nécessite une connaissance précise des valeurs nutritionnelles de leurs composantes, dont celle en acides aminés. Cependant, ces valeurs nutritionnelles dépendent de la teneur en acides aminés essentiels (AAE) totaux et de la digestibilité iléale standardisée (DIS) de ces AAE. Cette dernière varie en fonction de plusieurs facteurs, dont l’origine botanique des graines, les conditions de culture des récoltes, le stockage des aliments, les traitements physico-chimiques appliqués aux grains, les facteurs antinutritionnels (FANs) et les techniques expérimentales utilisées pour le dosage et l’estimation de la digestibilité des AAE. Une approche par méta-analyse a permis d’établir des modèles de prédiction de la valeur nutritionnelle en AAE des ingrédients à partir de leur composition chimique en considérant la protéine brute (PB), les AAE totaux, la teneur en fibre (Acid Detergent Fiber (ADF), Neutral Detergent Fiber (NDF) et Fibre Brute (FB)) et les FANs comme les inhibiteurs de la trypsine. En se référant à l’analyse graphique et statistique, les données ont été réparties en 4 groupes : 1) les tourteaux (tourteau de soja, colza/canola et coton); 2) les légumineuses (féveroles, lupins, pois et soja); 3) les céréales (blé, orge, avoine, sorgho et maïs); 4) les drêches de distilleries (blé et maïs). Ainsi, un modèle général ajusté en fonction du type d’ingrédients a été généré et les facteurs de variation de la digestibilité en AAE ont été identifiés. Pour les tourteaux, la DIS des AAE est réduite par un accroissement de la teneur en NDF, tandis que la DIS des AAE de la féverole, pois et lupin est principalement influencée par la teneur en PB et en FANs. Concernant les graines de soja la DIS des AAE est réduite par une hausse de la teneur en fibre (FB et ADF). Enfin pour les céréales et les sous- produit de céréales telles que les drêches, la PB et les fibres (ADF ou NDF) étaient les meilleurs nutriments pour prédire la DIS des AAE. Ces résultats démontrent que la DIS des AAE peut être prédite avec précision à partir de la composition chimique pour la plupart des ingrédients.

Contribuição dos métodos geofísicos para o modelo evolutivo da região de Santo André desde o último máximo glaciário

Tese de doutoramento, Geologia (Geologia Económica e do Ambiente), Universidade de Lisboa, Faculdade de Ciências, 2014

Caracterização de ambientes de transição do SW Alentejano a distintas escalas temporais

Tese de doutoramento, Geologia (Geologia Económica e do Ambiente), Universidade de Lisboa, Faculdade de Ciências, 2016

Microtunelação. Aplicação a um caso de obra

Um túnel é uma obra subterrânea dimensionada com o objetivo de satisfazer diversas necessidades num mundo onde o planeamento urbano e a gestão de espaços ganha cada vez mais importância. A execução de este género de obras de engenharia pode ter várias finalidades, que podem ir desde a construção/reabilitação de redes de saneamento, abastecimento de água ou gás (túneis de pequeno diâmetro) até à construção/modernização de redes pedonais, rodoviárias ou ferroviárias, galerias mineiras, tuneis para barragens, etc. (túneis de grande diâmetro). As tuneladoras são uma das ferramentas de desmonte mais utilizadas na execução de obras subterrâneas. Existem no mercado vários tipos de máquinas tuneladoras, a sua escolha e dimensionamento depende de diversos fatores que devem ser cuidadosamente analisados, nomeadamente tipo de terreno a escavar, presença ou não de água na zona de escavação, dureza e/ou abrasividade das formações a atravessar, etc. Será feita uma abordagem aos princípios de funcionamento de este tipo de equipamentos, indicando o seu campo de aplicação dentro da respetiva tecnologia de escavação onde se inserem. Finalmente será desenvolvido o caso da empreitada: “Execução da Travessia do Rio Ave, da Estação Elevatória de Vila do Conde e dos Sistemas Elevatória da Aguçadoura e da Apúlia 4 - AR 44.0.08”, onde em alternativa ao desvio provisório do Rio Ave em Vila do Conde foi projetada a execução de duas travessias no diâmetro 1200 mm, uma delas escavadas maioritariamente em terreno aluvionar brando e a outra em terreno rochoso duro e abrasivo com recurso, em ambos casos, à utilização de máquina tuneladora. Através da avaliação do desempenho do equipamento escolhido para execução de este trabalho será estudada a eficiência da utilização deste tipo de equipamento. Com o objetivo de mostrar os custos associados à execução de obras de escavação subterrânea com recurso a utilização de máquinas tuneladoras, será feita uma análise económica e comparativa relativa aos dois casos de obra apresentados.

Evolução geológica de Portugal continental durante o Cenozóico - sedimentação aluvial e marinha numa margem continental passiva (Ibéria ocidental)

6º Simposio sobre el Margen Ibérico Atlántico MIA09

Otimização da torre de arrefecimento da Artlant PTA

Trabalho Final de Mestrado para obtenção de grau de Mestre em Engenharia Química e Biológica

Sistemas de supervisão e controlo de autómatos: soluções baseadas em OPC E IEC 60870-5-104

Atualmente, no segmento metro-ferroviário, há uma tendência para que todos os equipamentos que constituem os sistemas auxiliares de uma estação (escadas mecânicas, elevadores, bloqueadores, validadores de bilhética, ventiladores, bombas, entre outros) sejam dotados de inteligência. Tipicamente, um conjunto de equipamentos são ligados a um autómato que permite o controlo local e remoto e é vulgar que, sendo de fabricantes diferentes, suportem tecnologias distintas. Um sistema de supervisão que permita o acesso à informação disponibilizada por cada um dos autómatos, ou à atuação sobre um deles, terá por isso que implementar e suportar diversos protocolos de comunicação de forma a não ficar limitado a um tipo de tecnologia. De forma a diminuir os custos de desenvolvimento e operação de um sistema de supervisão e controlo e facilitar a integração de novos equipamentos, com diferentes características, têm sido procuradas soluções que garantam uma mais fácil comunicação entre os diversos módulos intervenientes. Nesta dissertação são implementadas soluções baseadas em clientes OPC-DA e OPC-AE e no protocolo IEC 60870-5-104, permitindo que os sistemas de supervisão e de controlo comuniquem com os equipamentos através destes três módulos. Os principais aspectos inovadores estão associados à implementação de uma arquitetura multiprotocolo usando as novas tendências de supervisão e controlo baseadas em soluções distribuídas.