International Materials Science Seminars: A Bridge between Two Continents

International Materials Science Seminars aim at combining the expertise of several advanced research groups and creating an unique opportunity for foreign and Spanish students in terms of cutting-edge research.

Galvanic Corrosion of High-Temperature Low-Sag (HTLS) High Voltage Conductors: New Materials - New Challenges

High-Temperature Low-Sag (HTLS) high voltage overhead conductors offer higher operating temperatures, reduced resistance and less sag than conventional designs. With up to twice the current capacity for the same diameter conductor, they may help ease the power shortage in the constantly increasing electricity demand, but there might be some concerns about their corrosion resistance. These new conductors use materials relatively new to the power industry, such as advanced carbon fiber polymer matrix composites and unique metal matrix composites/nano-composites predominantly used in aerospace industries. This study has made an initial assessment of potential galvanic corrosion problems in three very different HTLS designs: ACCC (Aluminum Conductor Composite Core), ACCR (Aluminum Conductor Composite Reinforced) and ACSS (Aluminum Conductor Steel Supported). In particular the ACCC design was evaluated for its resistance to corrosion and compared to the other designs. The study concludes that all three designs can develop galvanic corrosion under certain circumstances. While the results are not sufficient to make service life predictions of any of the tested conductors, they point out the necessity of thorough corrosion testing of all new conductor designs.

Evidence of Intracrystalline Mesostructured Porosity in Zeolites by Advanced Gas Sorption, Electron Tomography and Rotation Electron Diffraction

The small size of micropores (typically <1 nm) in zeolites causes slow diffusion of reactant and product molecules in and out of the pores and negatively impacts the product selectivity of zeolite based catalysts, for example, fluid catalytic cracking (FCC) catalysts. Size-tailored mesoporosity was introduced into commercial zeolite Y crystals by a simple surfactant-templating post-synthetic mesostructuring process. The resulting mesoporous zeolite Y showed significantly improved product selectivity in both laboratory testing and refinery trials. Advanced characterization techniques such as electron tomography, three-dimensional rotation electron diffraction, and high resolution gas adsorption coupled with hysteresis scanning and density functional theory, unambiguously revealed the intracystalline nature and connectivity of the introduced mesopores. They can be considered as molecular highways that help reactant and product molecules diffuse quickly to and away from the catalytically active sites within the zeolite crystals and, thus, shift the selectivity to favor the production of more of the valuable liquid fuels at reduced yields of coke and unconverted feed.

Measuring color differences in gonioapparent materials used in the automotive industry

This paper illustrates how to design a visual experiment to measure color differences in gonioapparent materials and how to assess the merits of different advanced color-difference formulas trying to predict the results of such experiment. Successful color-difference formulas are necessary for industrial quality control and artificial color-vision applications. A color- difference formula must be accurate under a wide variety of experimental conditions including the use of challenging materials like, for example, gonioapparent samples. Improving the experimental design in a previous paper [Melgosaet al., Optics Express 22, 3458-3467 (2014)], we have tested 11 advanced color-difference formulas from visual assessments performed by a panel of 11 observers with normal colorvision using a set of 56 nearly achromatic colorpairs of automotive gonioapparent samples. Best predictions of our experimental results were found for the AUDI2000 color-difference formula, followed by color-difference formulas based on the color appearance model CIECAM02. Parameters in the original weighting function for lightness in the AUDI2000 formula were optimized obtaining small improvements. However, a power function from results provided by the AUDI2000 formula considerably improved results, producing values close to the inter-observer variability in our visual experiment. Additional research is required to obtain a modified AUDI2000 color-difference formula significantly better than the current one.

Cost-Effective Force Field Tailored for Solid-Phase Simulations of OLED Materials

A united atom force field is empirically derived by minimizing the difference between experimental and simulated crystal cells and melting temperatures for eight compounds representative of organic electronic materials used in OLEDs and other devices: biphenyl, carbazole, fluorene, 9,9′-(1,3-phenylene)bis(9H-carbazole)-1,3-bis(N-carbazolyl)benzene (mCP), 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (pCBP), phenazine, phenylcarbazole, and triphenylamine. The force field is verified against dispersion-corrected DFT calculations and shown to also successfully reproduce the crystal structure for two larger compounds employed as hosts in phosphorescent and thermally activated delayed fluorescence OLEDs: N,N′-di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPD), and 1,3,5-tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl (TPBI). The good performances of the force field coupled to the large computational savings granted by the united atom approximation make it an ideal choice for the simulation of the morphology of emissive layers for OLED materials in crystalline or glassy phases.

Primary Raw Materials (1986-89) Volume 1 (Summary Reports of the R&D Programme). EUR 13647/I EN, 1992

"This document contains the Summary Reports of cost sharing Research and Development contracts funded under the "Primary Raw Materials" subprogramme of the Commission of the European Communities. This programme was part of the research and development programme on "Raw Materials and Advanced Materials" (1986 - 1989). The main objectives of the "Primary Raw Materials" subprogramme were to enhance the competitiveness of the European Community mining and metallurgical Industries and to reduce European Community vulnerability for minerals, particularly those of critical or strategic interest." Three research areas: Research and development exploration; Mining technology; Mineral processing.

Advanced composite structures.

Cover title.

Project Neos; a generalized study of processes for the realization of esign configurations in materials. [Final] technical documentary report no. ML-TDR-64-311. MTD project no.7-867.

Mode of access: Internet.

Advanced composites : design and applications : proceedings of the 29th meeting of the Mechanical Failures Prevention Group, held at the National Bureau of Standards, Gaithersburg, Maryland, May 23-25, 1979 /

"The 29th meeting of the MFPG and these proceedings were sponsored by the Center for Materials Science of the National Bureau of Standards ... [et al.]"

Proceedings of the Infrared Laser Window Materials Meeting : 12 July 1976, Boulder, Colorado /

Includes bibliographical references.

Preliminary reports, memoranda and technical notes of the Materials Research Council Summer Conference

Mode of access: Internet.

Direct support and general support maintenance including depot maintenance repair parts and special tools for laser target designator test set AN/PAM-1, 4931-01-040-3317 : Laser Target Designator System.

Includes index.

Organization, direct support, and general support maintenance repair parts and special tools list : feeder, fines, bituminous mix, Army model 811A, NSN 3895-00-025-9932, barber-greene model 811A, component of mixing plant asphalt, 100-150 ton per hour.

Includes change no. 1 inserted at front.

Organizational maintenance repair parts and special tools lists : mixer, bituminous material, non-self loading, DED, NSN 3895-00-933-0577, Barber-Greene model KA60, component of mixing plant, asphalt, 100-150 ton per hour, NSN 3895-00-936-8613.

Includes index.

Direct support and general support maintenance repair parts and special tools lists (including depot maintenance repair parts and special tools lists) : mixer, bituminous material, non-self loading, DED, NSN 3895-00-933-0577, Barber-Greene model KA60, component of mixing plant, asphalt 100-150 ton per hour, NSN 3895-00-936-8613.

Includes index.