Light absorption and phytoplankton biomass in the Black Sea in spring 1995

Spectra of light absorption by suspended matter, phytoplankton, and detritus in the central and coastal parts of the Black Sea over the spring period (March-April 1995) were determined. Vertical homogeneity of the upper 40 m layer with respect to parameters in study was noted. Value of light absorption by phytoplankton normalized with respect to chlorophyll a was virtually independent of chlorophyll a concentration. A linear relationship between light absorption by phytoplankton and chlorophyll a concentration was established at the red spectral maximum. It is described by the equation y = 0.0153x; R**2 = 0.61. The average ratio of absorption values in the peaks was 2.29. Contribution of detritus to total light absorption at wavelength 440 nm was 23-62% regardless of depth and chlorophyll a concentration.

Photosynthetic parameters, chlorophyll concentration, and diffuse attenuation coefficients in the Rhode River, Maryland (USA), 1990-2009

Parameters in the photosynthesis-irradiance (P-E) relationship of phytoplankton were measured at weekly to bi-weekly intervals for 20 yr at 6 stations on the Rhode River, Maryland (USA). Variability in the light-saturated photosynthetic rate, PBmax, was partitioned into interannual, seasonal, and spatial components. The seasonal component of the variance was greatest, followed by interannual and then spatial. Physiological models of PBmax based on balanced growth or photoacclimation predicted the overall mean and most of the range, but not individual observations, and failed to capture important features of the seasonal and interannual variability. PBmax correlated most strongly with temperature and the concentration of dissolved inorganic carbon (IC), with lesser correlations with chlorophyll a, diffuse attenuation coefficient, and a principal component of the species composition. In statistical models, temperature and IC correlated best with the seasonal pattern, but temperature peaked in late July, out of phase with PBmax, which peaked in September, coincident with the maximum in monthly averaged IC concentration. In contrast with the seasonal pattern, temperature did not contribute to interannual variation, which instead was governed by IC and the additional lesser correlates. Spatial variation was relatively weak and uncorrelated with ancillary measurements. The results demonstrate that both the overall distribution of PBmax and its relationship with environmental correlates may vary from year to year. Coefficients in empirical statistical models became stable after including 7 to 10 yr of data. The main correlates of PBmax are amenable to automated monitoring, so that future estimates of primary production might be made without labor-intensive incubations.

Absorption and mobility of foliar-applied boron in soybean as affected by plant boron status and application as a polyol complex

In the present study (i) the impact of plant Boron (B) status on foliar B absorption and (ii) the effect of B complexation with polyols (sorbitol or mannitol) on B absorption and translocation was investigated. Soybean (Glycine max (L.) Meer.) plants grown in nutrient solution containing 0 μM, 10 μM, 30 μM or 100 μM 11B labelled boric acid (BA) were treated with 50 mM 10B labelled BA applied to the basal parts of two leaflets of one leaf, either pure or in combination with 500 mM sorbitol or mannitol. After one week, 10B concentrations in different plant parts were determined. In B deficient leaves (0 μM 11B), 10B absorption was significantly lower than in all other treatments (9.7% of the applied dose vs. 26%–32%). The application of BA in combination with polyols increased absorption by 18–25% as compared to pure BA. The absolute amount of applied 10B moving out of the application zone was lowest in plants with 0 μM 11B supply (1.1% of the applied dose) and highest in those grown in 100 μM 11B (2.8%). The presence of sorbitol significantly decreased the share of mobile 10B in relation to the amount absorbed. The results suggest that 11B deficiency reduces the permeability of the leaf surface for BA. The addition of polyols may increase 10B absorption, but did not improve 10B distribution within the plant, which was even hindered when applied a sorbitol complex.

Impact And Explosive Loads On Concrete Buildings Using Shell And Beam Type Elements

The threat of impact or explosive loads is regrettably a scenario to be taken into account in the design of lifeline or critical civilian buildings. These are often made of concrete and not specifically designed for military threats. Numerical simulation of such cases may be undertaken with the aid of state of the art explicit dynamic codes, however several difficult challenges are inherent to such models: the material modeling for the concrete anisotropic failure, consideration of reinforcement bars and important structural details, adequate modeling of pressure waves from explosions in complex geometries, and efficient solution to models of complete buildings which can realistically assess failure modes. In this work we employ LS-Dyna for calculation, with Lagrangian finite elements and explicit time integration. Reinforced concrete may be represented in a fairly accurate fashion with recent models such as CSCM model [1] and segregated rebars constrained within the continuum mesh. However, such models cannot be realistically employed for complete models of large buildings, due to limitations of time and computer resources. The use of structural beam and shell elements for this purpose would be the obvious solution, with much lower computational cost. However, this modeling requires careful calibration in order to reproduce adequately the highly nonlinear response of structural concrete members, including bending with and without compression, cracking or plastic crushing, plastic deformation of reinforcement, erosion of vanished elements etc. The main objective of this work is to provide a strategy for modeling such scenarios based on structural elements, using available material models for structural elements [2] and techniques to include the reinforcement in a realistic way. These models are calibrated against fully three-dimensional models and shown to be accurate enough. At the same time they provide the basis for realistic simulation of impact and explosion on full-scale buildings

Optical absorption and applications of the ABO4 (A=Ca, Pb and B= Mo, W) semiconductors

Ternary molybdates and tungstates ABO4 (A=Ca, Pb and B= Mo, W) are a group of materials that could be used for a variety of optoelectronic applications. We present a study of the optoelectronic properties based on first-principles using several orbitaldependent one-electron potentials applied to several orbital subspaces. The optical properties are split into chemical-species contributions in order to quantify the microscopic contributions. Furthermore, the effect of using several one-electron potentials and orbital subspaces is analyzed. From the results, the larger contribution to the optical absorption comes from the B-O transitions. The possible use as multi-gap solar cell absorbents is analyzed.

Studies to determine the absorption and excretion dynamics of lead /

Mode of access: Internet.

Density, absorption and specific gravity tests of aggregates, bituminous mixtures and surfaces.

Mode of access: Internet.

Absorption and distribution of C14-labeled tetramine in relation to its possible use in animal damage conrol.

Mode of access: Internet.

Developments in the Theory of X-ray Absorption and Compton Scattering.

Thesis (Ph.D.)--University of Washington, 2016-06

Absorption and fluorescence spectroscopy of rhodamine 6G in titanium dioxide nanocomposites

A comparison has been made between the spectroscopic properties of the laser dye rhodamine 6G (R6G) in mesostructured titanium dioxide (TiO2) and in ethanol. Steady-state excitation and emission techniques have been used to probe the dye-matrix interactions. We show that the TiO2-nanocomposite studied is a good host for R6G, as it allows high dye concentrations, while keeping dye molecules isolated, and preventing aggregation. Our findings have important implications in the context of solid state dye-lasers and microphotonic device applications. (C) 2003 Elsevier B.V. All rights reserved.

Muscle catabolism in cancer and its attenuation by eicosapentaenic acid

This work examines skeletal muscle catabolism in cancer and its attenuation by Eicosapentaenoic Acid (EPA). In vivo studies in mice bearing a cachexia inducing murine colon adenocarcinoma - MAC16, demonstrated an elevation in the gastrocnemius muscle in the activity and expression of regulatory components of the ubiquitin-proteasome proteolytic pathway. This was accompanied by an accelerated loss of muscle tissue correlating with an increase in overall weight loss, all of which were attenuated by prior daily dosing with EPA. Recently a proteolysis inducing factor (PIF) has been isolated from the MAC16 tumour, and from the serum and urine of cachectic cancer patients. Previous studies have shown that PIF induces protein degradation in vitro, and that this is possibly mediated through 15-hydroxyeicosatetraenoic acid (15-HETE), a metabolite of the n-6 polyunsaturated fatty acid- arachidonate. Employing the murine myoblast cell line C2C12, it was shown that both PIF and 15-HETE increased protein degradation and expression of proteasome subunits, processes which were again attenuated by prior incubation in EPA. Similarly, in NMRI mice which had been fasted for 24hours, EPA and the lipoxygenase inhibitor CV-6504 (but not structurally related fatty acids) inhibited skeletal muscle proteolysis and expression of various proteasome subunits, showing that firstly, EPA may be anti-cachexic partly through its ability to influence 15-HETE production; and secondly that the effect is specific for EPA as other fatty acids had no effect. Previous studies have suggested the involvement of the signal transduction family NFKB in response to PIF in the liver. It has been demonstrated here that both PIF and 15-HETE increased nuclear translocation of NFKB in the skeletal muscle of tumour bearing mice and that EPA inhibited this process by its ability to prevent the degradation of the NFKB inhibitor protein IKB. When an NFKB inhibitor was added to C2C12 myotubes, prior to the addition of PIF, proteasome activity and protein degradation was inhibited, showing that NFKB is responsible for the increased proteasome activity and muscle catabolism induced by PIF. Taken together this work suggests that 15-hydroxyeicosatetraenoic acid is the intracellular mediator for PIF induced protein degradation in skeletal muscle and that elevated muscle catabolism is accomplished through an increased functioning of the ubiquitin-proteasome pathway, a process possibly mediated through an NFKB dependent mechanism. The anticachectic (and possibly the anti-tumourigenic) effects of EPA appear to be achieved in part by its ability to inhibit the degradation of IKB and possibly by its ability to interfere with 15-HETE production.