Produção de biomassa por fungos Filamentosos em meio de vinhaça de cana-de-açúcar suplementado com melaço

Three species of filamentous fungi, Aspergillus niger, Penicillium fellutanum and Mucor hiemalis, were selected and cultivated in vinasse media with different addition of molasses, pasteurized to 85°C for 30 minutes and with pH = 5.0. The microorganisms, previously adapted to the respective medium for 48 hours, from a solution of 107 spores.ml-1, were cultivated in pure and mixed cultures in Erlenmeyer vessel of 500ml, to 30°C, with constant agitation of 170 rpm, for 24, 48 and 72 hours, with four repetition for each samples. The biomass was separated by vacuum filtration in filter Whatman #1 and dried in oven at 105°C until right weight, the obtained liquid was submited to COD analysis. The datas were statistically analysed using a response surface methodology, to improve the effect on the molasses proportion and culture time, in the biomass production by microorganism in research. According to the obtained results (5.02% of molasses, 55.59h, 70% of spores solution of A. niger and 30% of spores solution of P. fellutanum), cultivating was carried out in Microferm Fermentor New Brunswick for 48 hours at 300 rpm, aired at 1v/v/m, using 5 liters of medium added with 5.0% of molasses on the conditions above described. The average of the results obtained (6.81g.l-1) was higher than the confidence interval (5.937 ; 6.369) and was inside the prediction interval (4.471 ; 7.834) both of them significant at 95% by the statistical test employed.

Acúmulo de sacarose, produtividade e florescimento de cana-de-açúcar sob reguladores vegetais

Plant regulators have been used successfully for early ripening and flowering control in sugarcane (Saccharum spp. Hybrid). However, little information is available about the interactions between new genotypes and two plant regulators with regard to those variables. This study determined the effect of the regulators on the sucrose content, stalk production and flowering of seven sugarcane genotypes. The experiment was installed in March 2004 near Ja-, SP, Brazil A randomized complete block design was used with four blocks with a split plot treatment arrangement where the main plots were the genotypes IAC87-3396, IAC87-3410, IAC89-3124, IAC91-2195, 1AC91-5155, P088-62 and SP80-1842 and the subplots were sulfomethuron-methyl (15g i.a.·ha -1), etefon (480g i.a.·ha-1) and unsprayed control. Pol in cane was evaluated at 0, 21, 42, 63, 84, 105 and 126 days after the plant regulators application (DAA). Flowering, pith, stalk production and sucrose content were evaluated at 126 DAA. In most of the genotypes the use of plant regulators anticipated maturation in 21 days when compared with the unsprayed control. Etefon was more efficient for harvesting sugarcane between 42-84 DAA, whereas sulfomethuron-methyl was between 105 and 126 DDA. Both products controlled flowering. For most genotypes, the ripeners did not affect the productivity of stalks, except for sulfomethuron-methyl that reduced it in SP80-1842, and for ethephon that increased it in IAC91-2195. Sugar productivity of IAC89-3124 increased with both regulators, while it was higher in IAC91-2195 with ethephon application and lower in SP80-1842 with sulfomethuron-methyl use.

El acceso de las pequeñas y medianas empresas al financiamiento y el programa nacional de apoyo a la PYME del gobierno chileno: balance preliminar de una experiencia

Incluye Bibliografía

Seminario Ahorro y Financiamiento": resumen y conclusiones = Saving and Financing Seminar: summary and conclusions"

El seminario analizó cuatro estudios sobre ahorro y tres sobre asignación de recursos financieros, preparados por expertos de distintos países latinoamericanos.

Clasificaciones estadísticas económicas utilizadas en Cuba

Incluye Bibliografía

Información para la gestión de riesgo de desastres: Estudio de caso de cinco países: Chile

Incluye Bibliografía

Información para la gestión de riesgo de desastres estudio de caso de cinco países: Chile

En Chile, existen diversas In stituciones dedicads a la generación de información de carácter científico y técnico , útil para la realización de investigación y desarrollo de estudios de interés en el ámbito de los fenómenos naturales. Su examen , demuestra un desarrollo mayor en lo que se refiere a amenazas, especialmente en áreas como la meteorología o sismología, donde existe un importante número y cobertura de información disponible. La existencia de este tipo de información, no responde necesariamente a planes de gestión de riesgo, si no que, forma parte de las funciones habituales de los diferentes organismos, careciéndose de una política central que ordene y permita un aprovechamiento mejor de los datos que se disponen , resultando un alto grado de dispersión que limita el acceso a ésta. Otro aspecto que contribuye a un uso limitado de la información, es el costo que posee, restringiendo su acceso tanto a entidades públicas como privadas. A pesar de que los fenómenos naturales han sido recurrentes en el tiempo, no existen registros históricos a partir de los que sea posible obtener información integral de los efectos generados por éstos. La ausencia de registros válidos, agrega, por una parte, una dificultad a la hora de evaluar las consecuencias económicas de tales eventos. Por otra parte, en la mayoría de los casos los informes técnicos generados post-evento, contienen mayoritariamente información de la población afectada y sus viviendas, careciendo de referencias a las pérdidas de los sectores económicos. A partir del año 1997, la Oficina Nacional de Emergencia, ONEMI, sistematiza la información, elaborando un registro de todas las emergencias ocurridas a nivel país. Estos compendios están enfocados fundamentalmente a describir las características actuales de la emergencia, quedando por lo tanto sin desarrollo lo referente al análisis de las pérdidas económicas.

Pesca, alimentação, reprodução e crescimento do Amuré, Gobioides broussonnetii Lacepède, 1800 (Pisces : Gobiidae) no Estuário Amazônico, município de Vigia - Pará

Gobioides broussonnetii é o maior membro da família Gobiidae, e está distribuído no Atlântico Ocidental dos Estados Unidos até o Rio Grande do Sul. É abundante na foz do Rio Amazonas onde habita as águas salobras dos manguezais. Além de ser um importante elo na cadeia trófica do estuário amazônico, é um recurso pesqueiro explorado por pescadores artesanais. Estudaram-se aspectos da pesca, alimentação, reprodução e crescimento de Gobioides broussonnetii na baía de Marajó, município de Vigia, Pará, Brasil, entre setembro de 2003 e agosto de 2004. Exemplares para estudo foram adquiridos de pescadores locais e informações sobre a pesca foram obtidas através da observação de campo e entrevistas com os pescadores. No estudo da alimentação foi analisada a composição dos itens alimentares encontrados nos estômagos. A análise reprodutiva abordou aspectos do período reprodutivo e tamanho da 1a maturação gonadal. Foram estimados os parâmetros de crescimento utilizando o método indireto baseados nas análises das medidas de comprimento total de 1155 exemplares. G. broussonnetii é conhecida como amurés no estuário amazônico e é capturada no fundo lodoso em águas rasas sendo utilizada como isca na pesca comercial. De maneira geral é uma espécie fitófaga. Análises de conteúdo estomacal revelaram que algas da espécie Coscinodiscus concinus são alimentos mais consumidos. Há maior conteúdo estomacal durante a estação seca (julho a dezembro). O período entre janeiro e junho corresponde a época de atividade reprodutiva para essa espécie na área de estudo. O comprimento médio da primeira maturação gonadal foi de 23,9 cm. A razão sexual observada foi de 1:1. Os resultados obtidos neste estudo indicam que G. Broussonnetii usa o estuário amazônico como local de alimentação e reprodução. A análise macroscópica das gônadas indicou uma época de reprodução durante o inverno (janeiro a junho), com apenas um período de desova por ano entre fevereiro e abril. Foram encontrados nove grupos etários de G. btoussonnetii no estuário amazônico. Estimaram-se os valores de L∞ = 67,36 ( K=0,205 ano^-1, Ø = 3,014). A relação peso-comprimento apresentou diferenças significativas entre machos e fêmeas, com as fêmeas que pesam mais que os machos.

Desenvolvimento de um escore preditor da eficácia do tratamento quimioterápico pré-operatório em mulheres com carcinoma de mama localmente avançado

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Metacommunity structuring in stream networks: roles of dispersal mode, distance type, and regional environmental context

Within a metacommunity, both environmental and spatial processes regulate variation in local community structure. The strength of these processes may vary depending on species traits (e.g., dispersal mode) or the characteristics of the regions studied (e.g., spatial extent, environmental heterogeneity). We studied the metacommunity structuring of three groups of stream macroinvertebrates differing in their overland dispersal mode (passive dispersers with aquatic adults; passive dispersers with terrestrial adults; active dispersers with terrestrial adults). We predicted that environmental structuring should be more important for active dispersers, because of their better ability to track environmental variability, and that spatial structuring should be more important for species with aquatic adults, because of stronger dispersal limitation. We sampled a total of 70 stream riffle sites in three drainage basins. Environmental heterogeneity was unrelated to spatial extent among our study regions, allowing us to examine the effects of these two factors on metacommunity structuring. We used partial redundancy analysis and Moran's eigenvector maps based on overland and watercourse distances to study the relative importance of environmental control and spatial structuring. We found that, compared with environmental control, spatial structuring was generally negligible, and it did not vary according to our predictions. In general, active dispersers with terrestrial adults showed stronger environmental control than the two passively dispersing groups, suggesting that the species dispersing actively are better able to track environmental variability. There were no clear differences in the results based on watercourse and overland distances. The variability in metacommunity structuring among basins was not related to the differences in the environmental heterogeneity and spatial extent. Our study emphasized that (1) environmental control is prevailing in stream metacommunities, (2) dispersal mode may have an important effect on metacommunity structuring, and (3) some factors other than spatial extent or environmental heterogeneity contributed to the differences among the basins.

Humoral immune response in dogs and cats vaccinated against rabies in southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of cardiac autonomic modulation of children with attention deficit hyperactivity disorder

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Retenção de água em dois tipos de latossolos sob diferentes usos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A MICROSTRAIN COMPARISON OF PASSIVELY FITTING SCREW-RETAINED AND CEMENTED TITANIUM FRAMEWORKS

Statement of problem. An imprecise fit between frameworks and supporting dental implants in loaded protocols increases the strain transferred to the periimplant bone, which may impair healing or generate microgaps.Purpose. The purpose of this study was to investigate the microstrain between premachined 1-piece screw-retained frameworks (group STF) and screw-retained frameworks fabricated by cementing titanium cylinders to the prefabricated framework (group CTF). This procedure was developed to correct the misfit between frameworks and loaded implants.Material and methods. Four internal hexagon cylindrical implants were placed 10 mm apart in a polyurethane block by using the surgical guides of the corresponding implant system. Previously fabricated titanium frameworks (n=10) were divided into 2 groups. In group STF, prefabricated machined frameworks were used (n=5), and, in group CTF, the frameworks were fabricated by using a passive fit procedure, which was developed to correct the misfit between the cast titanium frameworks and supporting dental implants (n=5). Both groups were screw-retained under torque control (10 Ncm). Six strain gauges were placed on the upper surface of the polyurethane block, and 3 strain measurements were recorded for each framework. Data were analyzed with the Student t test (alpha=.05).Results. The mean microstrain values between the framework and the implants were significantly higher for group STF (2517 me) than for group CTF (844 me) (P<.05).Conclusions. Complete-arch implant frameworks designed for load application and fabricated by using the passive fit procedure decreased the strain between the frameworks and implants more than 1 piece prefabricated machined frameworks.