Analysis of warm season thunderstorms using an object-oriented tracking method based on radar and total lightning data

Monitoring thunderstorms activity is an essential part of operational weather surveillance given their potential hazards, including lightning, hail, heavy rainfall, strong winds or even tornadoes. This study has two main objectives: firstly, the description of a methodology, based on radar and total lightning data to characterise thunderstorms in real-time; secondly, the application of this methodology to 66 thunderstorms that affected Catalonia (NE Spain) in the summer of 2006. An object-oriented tracking procedure is employed, where different observation data types generate four different types of objects (radar 1-km CAPPI reflectivity composites, radar reflectivity volumetric data, cloud-to-ground lightning data and intra-cloud lightning data). In the framework proposed, these objects are the building blocks of a higher level object, the thunderstorm. The methodology is demonstrated with a dataset of thunderstorms whose main characteristics, along the complete life cycle of the convective structures (development, maturity and dissipation), are described statistically. The development and dissipation stages present similar durations in most cases examined. On the contrary, the duration of the maturity phase is much more variable and related to the thunderstorm intensity, defined here in terms of lightning flash rate. Most of the activity of IC and CG flashes is registered in the maturity stage. In the development stage little CG flashes are observed (2% to 5%), while for the dissipation phase is possible to observe a few more CG flashes (10% to 15%). Additionally, a selection of thunderstorms is used to examine general life cycle patterns, obtained from the analysis of normalized (with respect to thunderstorm total duration and maximum value of variables considered) thunderstorm parameters. Among other findings, the study indicates that the normalized duration of the three stages of thunderstorm life cycle is similar in most thunderstorms, with the longest duration corresponding to the maturity stage (approximately 80% of the total time).

Lipídios em sedimentos arqueológicos: resultados preliminares do sítio arqueológico Rio do Meio, Ilha de Santa Catarina (SC)

Este trabalho foi realizado com o objetivo de avaliar a distribuição de lipídios em sedimentos arqueológicos do sítio Rio do Meio, Ilha de Santa Catarina. Nos extratos totais de lipídios, analisados por cromatografia gasosa e espectrometria de massas (CG e CG-EM), predominaram os compostos ácidos e álcoois saturados. Foram detectados pelo menos dois tipos de matéria orgânica: uma antiga e outra comparativamente recente. Na primeira, o extrato total de lipídios foi dominado por ácidos graxos de cadeias curtas (< Ac20:0), com menor percentagem de ácidos e álcoois de cadeias longas (> Ac20:0 e Al20:0). Em contraste, na deposição classificada como recente, foram identificados em maiores teores os ácidos e álcoois de cadeias longas (> Ac20:0 e Al20:0). Neste estudo, foi possível observar a incorporação de material orgânico procedente de fontes de origem vegetal, bacteriana e, possivelmente, animal (gorduras) nos sedimentos arqueológicos analisados.

Planossolos e Gleissolos Utilizados na Fabricação de Cerâmica Artesanal no Semiárido de Minas Gerais

O conhecimento etnopedológico tem fornecido informações importantes sobre o modo de vida das populações rurais a respeito de suas tradições ancestrais, como a arte de elaborar peças artesanais a partir do barro advindo de solos com características próprias a esse uso. O objetivo deste trabalho foi avaliar física, química e mineralogicamente Planossolos e Gleissolos explorados para a produção de artefatos de cerâmica artesanal em Minas Gerais. Nos barreiros, foram coletados dois perfis de Planossolos (P1 e P2) e um Gleissolo (P3) usados como matéria-prima na produção artesanal de cerâmica. Foram realizadas análises físicas e químicas, limites de liquidez (LL) e plasticidade (LP), índice de plasticidade (IP) e de atividade coloidal (IA), além da mineralogia da fração argila. Os horizontes selecionados pelos ceramistas para a fabricação de cerâmica artesanal (BA, Btg e BCg, do P1; Btg1 e Btg2, do P2; e C2g e C3g, do P3) apresentaram os maiores teores de argila e silte, IP e IA, importantes para a qualidade final da cerâmica. O horizonte Cg do perfil P1 possui potencial de ser utilizado para a produção artesanal, em virtude do seu IP, superior aos dos horizontes normalmente usados, além dos teores de argila, silte e areia fina e suas características mineralógicas. A proporção ideal das frações areia, silte e argila e a porcentagem de matéria orgânica na definição de um bom material para cerâmica são difíceis de estabelecer e variam principalmente em razão de aspectos quantitativos e qualitativos da argila nos solos.

PROPRIEDADES MECÂNICAS E PERMEABILIDADE AO AR EM TOPOSSEQUÊNCIA ARGISSOLO-GLEISSOLO: VARIAÇÃO NO PERFIL E EFEITO DE COMPRESSÃO

Uma topossequência apresenta solos com características estruturais e morfológicas distintas que podem alterar a susceptibilidade à deformação estrutural em curtas distâncias espaciais. Os objetivos deste estudo foram avaliar a capacidade de suporte de carga e a suscetibilidade à compactação e mensurar o efeito que cargas acima e abaixo da pressão de preconsolidação causam na permeabilidade ao ar de solos numa topossequência da Depressão Central do Rio Grande do Sul, Brasil. Amostras indeformadas foram coletadas nos horizontes de três perfis de Argissolos (Ap, A1, AB, BA, Bt1 e Bt2; Ap, A1, A2, AB, BA, Bt1 e Bt2; e Ap, A1, BA, Bt1 e Bt2) e dois de Gleissolos (A1, A2, Bg; A, Bg e Cg), no longo de uma topossequência. Essas amostras foram submetidas ao teste de compressão uniaxial, sendo avaliada a permeabilidade ao ar antes e após compressão. Na condição de capacidade de campo, os Gleissolos apresentaram menor suscetibilidade à compactação e maior capacidade de suporte de carga que os Argissolos. O teor de argila esteve diretamente correlacionado com a capacidade de suporte de carga. Portanto, foi inversamente proporcional à suscetibilidade à compactação, exceto em condições de elevada umidade do solo quando a água lubrificou as superfícies aumentando a susceptibilidade à compactação de quaisquer solos. Até 25 kPa de carga ao solo não resultou degradação física do solo, mas quando foram aplicadas cargas de 200 kPa, mesmo na condição de capacidade de campo, houve redução significativa do volume de macroporos e porosidade total em níveis inferiores ao limite crítico (0,10 m3 m-3).

Evolution of self-organized division of labor in a response threshold model.

Division of labor in social insects is determinant to their ecological success. Recent models emphasize that division of labor is an emergent property of the interactions among nestmates obeying to simple behavioral rules. However, the role of evolution in shaping these rules has been largely neglected. Here, we investigate a model that integrates the perspectives of self-organization and evolution. Our point of departure is the response threshold model, where we allow thresholds to evolve. We ask whether the thresholds will evolve to a state where division of labor emerges in a form that fits the needs of the colony. We find that division of labor can indeed evolve through the evolutionary branching of thresholds, leading to workers that differ in their tendency to take on a given task. However, the conditions under which division of labor evolves depend on the strength of selection on the two fitness components considered: amount of work performed and on worker distribution over tasks. When selection is strongest on the amount of work performed, division of labor evolves if switching tasks is costly. When selection is strongest on worker distribution, division of labor is less likely to evolve. Furthermore, we show that a biased distribution (like 3:1) of workers over tasks is not easily achievable by a threshold mechanism, even under strong selection. Contrary to expectation, multiple matings of colony foundresses impede the evolution of specialization. Overall, our model sheds light on the importance of considering the interaction between specific mechanisms and ecological requirements to better understand the evolutionary scenarios that lead to division of labor in complex systems. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s00265-012-1343-2) contains supplementary material, which is available to authorized users.

The "open" chimney graft technique for juxtarenal aortic aneurysms with discrepant renal arteries.

OBJECTIVES: A straightforward original Chimney Graft (CG) protocol has been developed at our institution in selected cases of juxtarenal aortic aneurysm (JRAA). The aim of this study was to present our clinical experience of consecutive series with use of uncovered self-expanding stent (SES) as "Open Chimney" (OCh) in the endovascular repair (EVAR) of JRAA. METHODS: A standard endograft with suprarenal fixation struts is delivered with its proximal covered edge just below the highest RA in JRAA presenting the ostium of the two renal arteries at a different aortic level and the distance between the highest renal artery and the beginning of the aneurysm (improved landing zone) ≥10 mm. The low-lying renal artery is maintained patent by the OCh graft (standard SES) delivered from left brachial access (6 Fr). All clinical, anatomical, and operative data were prospectively collected and retrieved for the study analysis. RESULTS: From July 2010 to November 2012, OCh EVAR was offered to 22 consecutive patients considered unfit for JRAA open repair. All procedures were technically successful with aneurysm exclusion and patent OCh graft. One small perioperative type Ia endoleak spontaneously disappeared at the 3-month CT control. One patient died because of acute decompensated heart failure. One patient presented a left hemispheric stroke. The median follow-up of 18 months (range 7-35) showed aneurysm exclusion in all patients without type I and III endoleaks, SES stenosis, and/or renal impairment. CONCLUSIONS: OCh-EVAR is a straightforward technique that can be employed in selected cases of JRAA, avoiding the more complex and expensive fenestrated EVAR.

Thyroid hormones stimulate expression and modification of cytoskeletal protein during rat sciatic nerve regeneration.

Peripheral neurons can regenerate after axotomy; in this process, the role of cytoskeletal proteins is important because they contribute to formation and reorganization, growth, transport, stability and plasticity of axons. In the present study, we examined the effects of thyroid hormones (T3) on the expression of major cytoskeletal proteins during sciatic nerve regeneration. At various times after sciatic nerve transection and T3 local administration, segments of operated nerves from T3-treated rats and control rats were examined by Western blotting for the presence of neurofilament, tubulin and vimentin. Our results revealed that, during the first week after surgery, T3 treatment did not significantly alter the level of NF subunits and tubulin in the different segments of operated nerves compared to control nerves. Two or 4 weeks after operation, the concentration of NF-H and NF-M isoforms was clearly increased by T3 treatment. Moreover, under T3-treatment, NF proteins appeared more rapidly in the distal segment of operated nerves. Likewise, the levels of betaIII, and of acetylated and tyrosinated tubulin isotypes, were also up-regulated by T3-treatment during regeneration. However, only the tyrosinated tubulin form appeared earlier in the distal nerve segments. At this stage of regeneration, T3 had no effect on the level of vimentin expression. In conclusion, thyroid hormone improves and accelerates peripheral nerve regeneration and exerts a positive effect on cytoskeletal protein expression and transport involved in axonal regeneration. These results help us to understand partially the mechanism by which thyroid hormones enhance peripheral nerve regeneration. The stimulating effect of T3 on peripheral nerve regeneration may have considerable therapeutic potential.

Common variants near MC4R are associated with fat mass, weight and risk of obesity.

To identify common variants influencing body mass index (BMI), we analyzed genome-wide association data from 16,876 individuals of European descent. After previously reported variants in FTO, the strongest association signal (rs17782313, P = 2.9 x 10(-6)) mapped 188 kb downstream of MC4R (melanocortin-4 receptor), mutations of which are the leading cause of monogenic severe childhood-onset obesity. We confirmed the BMI association in 60,352 adults (per-allele effect = 0.05 Z-score units; P = 2.8 x 10(-15)) and 5,988 children aged 7-11 (0.13 Z-score units; P = 1.5 x 10(-8)). In case-control analyses (n = 10,583), the odds for severe childhood obesity reached 1.30 (P = 8.0 x 10(-11)). Furthermore, we observed overtransmission of the risk allele to obese offspring in 660 families (P (pedigree disequilibrium test average; PDT-avg) = 2.4 x 10(-4)). The SNP location and patterns of phenotypic associations are consistent with effects mediated through altered MC4R function. Our findings establish that common variants near MC4R influence fat mass, weight and obesity risk at the population level and reinforce the need for large-scale data integration to identify variants influencing continuous biomedical traits.

Deicing Salt Corrosion with and without Inhibitors, MLR-87-8, 1989

Chloride ion penetration through concrete to reinforcing steel is causing the premature deterioration of numerous bridge decks in Iowa. The purpose of the research reported in this paper was to determine whether any of several additives or alternative deicing chemicals could inhibit corrosion of reinforcing steel. The deicers tested were calcium magnesium acetate (CMA), CMA plus NaCl (NaCl: sodium chloride), Quicksalt plus PCI, and CG-90, a polyphosphate solution being developed by Cargill. Two tests were established. First, steel coupons were placed in a 15% solution of a deicer and distilled water to determine which alternative deicer would cause the least amount of corrosion in solution. The coupons were weighed periodically to determine each coupon's weight loss from corrosion. The second test involved ponding a 15% solution of each material on reinforced concrete blocks. Weekly copper-copper sulfate electrical half-cell (CSE) potential readings were taken on each block to determine whether corrosive activity was occurring at the steel surface. When the ponding research was concluded, concrete samples were taken from one of the three blocks ponded with each deicer. The samples were used to determine the chloride ion content at the level of the steel. Results show that all the deicers were less corrosive than NaCl. Only pure CMA, however, significantly inhibited the corrosion of steel embedded in concrete.

Avaliação de programas hormonais para a indução e sincronização do estro em caprinos

O objetivo deste trabalho foi estabelecer alternativas para indução e sincronização do estro em cabras leiteiras manejadas semi-intensivamente. Foram conduzidos quatro experimentos com 411 cabras na Embrapa-Centro Nacional de Pesquisa deCaprinos, Sobral, CE. No protocolo básico, utilizaram-se esponjas intra-vaginais com 50 mg de acetato de medroxiprogesterona (MAP) por dez dias e aplicação intra-muscular de 100 mig de cloprostenol e 200 UI de gonadotropina coriônica eqüina (eCG) no 8º dia; a inseminação artificial (IA), com sêmen congelado foi feita 38 horas após remoção da esponja. No experimento1 substituiu-se a e CG pelo "efeito macho"; no experimento 2 substituiu-se a dose de MAP para 60 mg; no experimento3 compararam-se diferentes momentos de IA: 38, 44 e 50 horas e no experimento 4 substituiu-se a eCG pela gonadotropina humana (hCG). Nenhuma das alternativas testadas modificou (P>0,05) a prolificidade. A IA em cio natural gerou maior (P<0,05) índice de parição no experimento2(67,7%) e no experimento 4 (73,3%). A dose de 60 mg de MAP permitiu realizar a IA mais tarde (44 horas apósretirar a esponja) sem detrimento da fertilidade. A hCG equivaleu a eCG, se aplicada 48 horas antes de retirar a esponja.