Effect of potassium fertilization on yield and nutrition of yerba mate (Ilex paraguariensis)

Yerba mate (Ilex paraguariensis) is a tree species native to the subtropical regions of South America, and is found in Brazil predominantly in the southern region. Despite the historical importance in this region, so far, studies on crop nutrition to improve yields are scarce. Thus, this study evaluated the effect of potassium rates on K soil availability, and the yield and nutritional status of yerba mate. The experiment was conducted in São Mateus do Sul, State of Paraná, on a Humox soil, where K2O rates of 0, 20, 40, 80, 160, and 320 kg ha-1 were tested on 7-year-old plantations. The experiment was harvested 24 months after installation by removing approximately 95 % of the canopy that had sprouted from the previous harvest. The soil was evaluated for K availability in the layers 0-10, 0-20, 10-20, and 20-40 cm. The plant parts leaf fresh matter (LM), twigs (TW), thick branches (BR) and commercial yerba mate (COYM), i.e., LM+TW, were analyzed. In addition, the relationship between fresh matter/dry matter (FM/DM) and K concentration in LM, AG and BR were evaluated. The fertilization increased K availability in all evaluated soil layers, indicating good mobility of the nutrient even at low rates. Yerba mate responded positively to increasing K2O rates with higher yields of all harvested components. The crop proved K-demanding, with a maximum COYM yield of 28.5 t ha-1, when 72 mg dm-3 K was available in the 0-20 cm layer. Yerba mate in the plant production stage requires soil K availability at medium to high level; in clayey soil with low K availability, a rate of 300 kg ha-1 K2O should be applied at 24 month intervals to obtain high yields. A leaf K concentration of 16.0 g ha-1 is suitable for yerba mate in the growth stage.

APPRAISAL OF THE SNAP MODEL FOR PREDICTING NITROGEN MINERALIZATION IN TROPICAL SOILS UNDER EUCALYPTUS

The Soil Nitrogen Availability Predictor (SNAP) model predicts daily and annual rates of net N mineralization (NNM) based on daily weather measurements, daily predictions of soil water and soil temperature, and on temperature and moisture modifiers obtained during aerobic incubation (basal rate). The model was based on in situ measurements of NNM in Australian soils under temperate climate. The purpose of this study was to assess this model for use in tropical soils under eucalyptus plantations in São Paulo State, Brazil. Based on field incubations for one month in three, NNM rates were measured at 11 sites (0-20 cm layer) for 21 months. The basal rate was determined in in situ incubations during moist and warm periods (January to March). Annual rates of 150-350 kg ha-1 yr-1 NNM predicted by the SNAP model were reasonably accurate (R2 = 0.84). In other periods, at lower moisture and temperature, NNM rates were overestimated. Therefore, if used carefully, the model can provide adequate predictions of annual NNM and may be useful in practical applications. For NNM predictions for shorter periods than a year or under suboptimal incubation conditions, the temperature and moisture modifiers need to be recalibrated for tropical conditions.

Micronutrient Accumulation in Conilon Coffee Berries with Different Maturation Cycles

ABSTRACT The number of days between anthesis and maturation of conilon coffee berries varies according to the genotype. Thus, it is believed that periods of greater nutrient demand for fruit formation also vary according to the genotype, directly influencing fertilizer management. The goal of this study was to establish accumulation curves for the micronutrients boron, copper, iron, manganese, and zinc in conilon coffee trees with different maturation cycles. The experiment was conducted in Nova Venécia, State of Espírito Santo, Brazil, during the reproductive cycle of the 2010/2011 crop year. Four coffee genotypes with different maturation cycles (early, intermediate, late, and super-late) were studied. A completely randomized experimental design was used with five replications. The treatments correspond to the accumulation of B, Cu, Fe, Mn, and Zn in the berries every 28 days in the period from flowering to harvest. The early, intermediate, and late genotypes accumulated Fe, Cu, and Mn in a similar manner, with sigmoid curves, whereas the super-late genotype accumulated these nutrients exponentially. Zn was accumulated by all four genotypes following a sigmoid curve. The early, intermediate, and late genotypes accumulated B linearly, whereas the super-late genotype accumulated B following a sigmoid curve. The maturation cycle of the genotype must be taken into account to apply the correct rate of micronutrient fertilization in coffee plantations.

Soil Compaction Curve of an Oxisol Under Sugarcane Planted After In-row Deep Tillage

ABSTRACT Soil tillage that maintains the productivity of sugarcane plantations, providing an area for the root development and without traffic on crop rows, has given rise to new technologies in rural areas. The purpose of this study was to evaluate the soil physical properties in two sugarcane plantations, one of which was prepared with deep tilling and the other with conventional tillage. The experiment was conducted in Lençóis Paulista, São Paulo State. Soil penetration resistance and relative density were analyzed. The cone index was lower in deep-tilled soil without traffic in all layers, than in deep-tilled soil with traffic and in conventional tillage. In both tillage treatments, the relative density values were acceptable in the 0.00-0.15 m soil layer, but considered detrimental for sugarcane development in the 0.15-0.30 and 0.30-0.45 m layers.

Les interventions des institutions de Bretton Woods dans la sous-région d'Afrique Centrale : les exemples du Cameroun et du Gabon (1987-2007)

RESUME DE LA THESE Le but de cette thèse est d'analyser la réforme générale de l'Etat au Cameroun et au Gabon par les institutions de Bretton Woods sur une période de vingt ans (1987-2007). Pour ce faire, mon travail consiste à étudier le rôle majeur joué par les différentes mesures économiques impulsées dans les pays par le Fonds Monétaire International (FMI) et la Banque Mondiale. Il s'agit de voir si les différentes réformes d'ajustement que ces institutions ont imposé au Cameroun et au Gabon ont produit des effets positifs en vue de solution la crise économique qui s'y installait durablement et remettre ces Etats sur le sentier de la croissance et du développement. L'avènement de la crise économique qui sévissait dans les pays au milieu des années 1980 montrait que le modèle développementaliste expérimenté par ces Etats n'avait expérimenté contribué qu'à provoquer la paralysie de l'appareil de production. Les causes profondes résidaient dans l'omniprésence de l'Etat qui privilégiait une logique administrative au dépend de celle de production au point de nuire gravement aux politiques interventionnistes étatiques. A cela, s'ajoutaient d'autres facteurs endogènes et exogènes aux Etats comme la mauvaise gestion couplée à la forte corruption et au clientélisme politique, la contrebande et le dumping, l'effritement du secteur agricole dû au vieillissement des plantations et à la sous-mécanisation, l'explosion démographique, la détérioration des termes de l'échange, le chômage endémique et galopant, etc. En ayant recours aux réformes d'ajustement structurel du FMI et de la Banque Mondiale, les gouvernements camerounais et gabonais entendaient lutter contre les rigidités institutionnelles et les distorsions structurelles qui empêchaient leurs économies de répondre aux signaux du marché et d'accroître l'offre d'une part. Et, d'autre part, les réformes d'ajustement devaient permettre de renforcer la concurrence des produits sur les marchés, accroître les capacités d'adaptation des marchés de facteurs et améliorer l'efficacité et l'efficience du secteur public. Mais avant d'analyser les réformes d'ajustement dans les pays j'ai d'abord présenté dans une première partie, l'évolution sociopolitique et économique des deux pays. Cette partie donne à l'analyse une profondeur historique indispensable et rend compte de l'évolution des politiques sectorielles des Etats marquée par une phase de croissance (1960-1984), puis par une phase de décroissance ou de crise qui commence à partir de 1985. La seconde partie met en évidence les politiques d'ajustement structurelle principalement axées sur la régulation monétaire, financière et budgétaire, la réforme de la fonction publique, la réforme agricole, le désengagement de l'Etat du secteur productif national et les privatisations. Je termine cette seconde partie par un bilan contrasté que je dresse de l'impact de ces réformes dans les économies camerounaises et gabonaises. La troisième partie met en évidence les nouvelles orientations stratégiques des institutions de Bretton Woods en partant de l'agenda politique des réformes au Cameroun et au Gabon. Elle fait intervenir une batterie de réformes portant sur l'initiative Pays Pauvres Très Endettés (PPTE), les Documents de Stratégie pour la Réduction de la Pauvreté (DSRP), l'Evaluation Politique et Institutionnelle du Pays (EPIP) et la «Bonne Gouvernance». Cette thèse s'achève par une conclusion exhaustive mettant en évidence les insuffisances des modèles théoriques et conceptuels fondant l'ajustement structurel et la remise en cause des nouvelles stratégies de lutte contre la pauvreté impulsées par le FMI et la Banque Mondiale dans les pays d'une part. D'autre part, j'observe une faiblesse institutionnelle de l'Etat dans ces pays qui se résume à la mauvaise gouvernance ; à l'absence d'un cadre et des outils appropriés pour la gestion économique et stratégique du développement à long terme ; à l'impunité généralisée et à l'inefficacité des mesures de lutte contre la pauvreté ; à l'absence d'un Etat de droit et à l'autoritarisme des régimes en place.

Transplantation of a human mammary carcinoma cell line (BT 20) into nude mice.

Cell suspensions of a human mammary carcinoma cellline (BT 20), wh en injected subcutaneously into nude athymie mice (BALB/c NujNu), produced tumor nodules at the injection site. Subsequent seriai transM plantations also gave rise to neoplastic nodules after latency periods averaging 3 weeks. The nodules displayed morphologie and functional characteristics comparable to those of the original tumor cells. Metastases, however, were not observed in any of the tumor-bearing mice.

Abundance and diversity of soil mites of fragmented habitats in a biosphere reserve in Southern Nigeria

Soil samples were collected from the top 7.5 cm of soil in a Strict Natural Reserve (SNR), a surrounding buffer zone, a cassava farm and matured plantations of Gmelina, teak, and pine, so as to determine if plantation establishment and intensive cultivation affect the density and diversity of soil mites. Altogether, 41 taxonomic groups of mites were identified. The diversity and densities of mites in within the SNR, the buffer zone and the Gmelina were more than the diversity and densities in the cassava farm, teak and pine plantations. Each plantation had its own unique community structure which was different from the community structure in the SNR plot. The SNR plot and Gmelina were dominated by detritivorous cryptostigmatid mites unlike teak and pine which were dominated by predatory mesostigmatid and prostigmatid mites respectively. Low cryptostigmatid mite densities in the plantations and cassava farm were seen as a consequence of low fertility status of the soil, the evidence of which was revealed by soil pH and organic matter data.

Provenance and family variation of Pinus caribaea var. hondurensis from Guatemala and Honduras, grown in Brazil, Colombia and Venezuela

Pinus caribaea var. hondurensis (Sénécl) Barr. & Golf. is a tropical pine that naturally occurs in lowland areas of Belize, El Salvador, Guatemala, Honduras, Nicaragua, and eastern Mexico. It has been one of the most studied tropical pines and the one with the most commercial importance in Brazil. The objective of this work was to select the best provenances for plantations and best trees in families for the establishment of seed orchards. For that a trial with five provenances and 47 open-pollinated families was planted near Planaltina, Federal District, in the Cerrado Region of Brazil. The provenances tested were Poptun (Guatemala), Gualjoco, Los Limones, El Porvenir and Santa Cruz de Yojoa (Honduras) and assessed at 12 years of age. Poptun and Gualjoco had larger volume, and Los Limones and El Porvenir the lowest incidence of forks and foxtails. Individual tree heritabilities for volume, stem form and branch diameter were 0.34, 0.06, and 0.26 respectively. More than 90% of the trees had defects, common in unimproved P. caribaea. Selection criteria for quality traits need to be relaxed in the first generation of breeding to allow for larger genetic gains in productivity. Results from this test compared with P. caribaea var. hondurensis trials in other Brazilian, Colombian and Venezuelan sites suggest that provenance x site and family x site interactions are not as strong as in other pine species.

Fertility life table of Trichogramma pretiosum and Trichogramma acacioi on eggs of Anagasta kuehniella at different temperatures

Species of the Trichogramma genus are among the most important ones for biological control. The objective of this research was to evaluate parasitism potential of two species of Trichogramma on eggs of Anagasta kuheniella through life fertility table, at temperatures between 15ºC and 35ºC. These species were collected in the State of Espírito Santo parasitising eggs of the avocado defoliator Nipteria panacea. Trichogramma pretiosum and T. acacioi showed adequate reproductive potential between 15ºC and 35ºC which indicates possibilities of using them in biological control programs in avocado plantations.

Collembolan community in broad-leaved forests and in conifer stands of Cryptomeria japonica in Central Japan

Collembolan communities in conifer plantations (Japanese cedar, Cryptomeria japonica) and secondary deciduous broad-leaved forests of varying ages were investigated to determine the extent to which forest conversion (broad-leaved to coniferous) affects the species richness and assemblage composition of Collembola in central Japan. Density and total species richness of Collembola not differed between the broad-leaved and cedar forests except immediately after clear-cutting. The amount of forest-floor organic matter was larger in cedar forests and positively correlated with the species richness of detritus feeders. Species richness of fungal feeders and sucking feeders positively correlated with the species richness of forest-floor plants. There was difference in collembolan species composition between the forest types. The age of the forests seemed to have only small importance for the collembolan community, except during the first four years after clear-cutting. The conversion to artificial cedar stands has not reduced the abundance or species richness of collembolan communities, but has affected community composition. Differences in species composition may be related to the ground floras.

Methodological adaptation for nematodes extration in forest soils of the southern Mata Atlântica

The objective of this work was to clarify whether the method to extract nematodes from European soils is suitable for forest soils and litter in the eastern of Paraná state, Brazil, and whether nematode abundance differs between sites with different ecosystems and levels of human interference. The study sites were situated in the coastal area of the Serra do Mar, near the town of Antonina, in Eastern Paraná, Brazil. Cobb's sieving and decanting method was more appropriate than ISO method, since extraction efficiency was higher and intra-sample variability was significantly lower. In order to achieve an extraction efficiency higher than 90%, Cobb's method was modified. For the extraction of nematodes from litter, the Baermann funnel, with an extraction time of 48 hours, yielded an extraction efficiency higher than 90%. Nematode abundance in litter was higher than in soil. The mean number of individuals extracted from the litter increased with the age stage of the forest sites sampled, and there was no difference in the number of individuals in the soil of the four forest sites. Mean nematode abundance in soil in banana plantations was about twice as high compared to the banana-palmito mixed stands and to the forest sites.

Assessment of growth and yield performance of rubber tree clones of the IAC 500 series

The objective of this work was to evaluate the performance of 15 clones of the IAC 500 series of Hevea brasiliensis, developed at Instituto Agronômico (IAC), over a 12-year period, in the northwest region of São Paulo State, Brazil. The 15 new clones evaluated are primary clones obtained from selected ortets within half-sib progenies. The clone RRIM 600, of Malaysian origin, was used as the control. Dry rubber yield performance over a four-year period, mean girth at the tenth year, girth increment before and during tapping, thermal properties of the natural rubber produced and other characters of the laticiferous system were evaluated. Forty percent of the clones were superior in comparison to the control for yield. Clone IAC 500 recorded the highest yield (66.81 g per tree per tapping) over four years of tapping, followed by IAC 502 (62.37 g per tree per tapping), whereas the control recorded 48.71 g per tree per tapping. All selected clones were vigorous in growth. The natural rubber from this IAC clones showed thermal stability up to 300ºC. No differences were observed in the thermal behavior of rubber among the IAC series and the RRIM 600 clones. The clones IAC 500, IAC 501, IAC 502, IAC 503 and IAC 506 are the more promising for small-scale plantations, due to growth and yield potential.

Sellutehtaan valkaisusäätöjen evaluointi

Tämän diplomityön tarkoituksena oli arvioida UPM-Kymmene Oyj, Kaukaan sellutehtaan havukuitulinjan uuden valkaisusäätömenetelmän, kompensoidun kappakerroinsäädön, ja vaaleusanalysaattoreiden käyttöönoton vaikutukset klooridioksidikulutukseen ja sellun laatuun. Kirjallisuusosassa esitelläänvalkaisun tärkeimpiä on-line ja in-line mittalaitteita sekä niitä hyödyntäviä säätöratkaisuja. Tiettävästi paras saatavilla oleva säätömenetelmä, kompensoitu kappakerroinsäätö määrittää klooridioksidiannoksen vaiheeseen tulevan massan kappaluvun tai vaaleuden perusteella. Valkaisukemikaaliannos optimoidaan jatkuvatoimisten vaaleus- ja jäännösmittausten sekä vaiheen jälkeisen saavutetun kappaluvuntai vaaleuden takaisinkytkennällä. Kokeellisessa osassa arvioitiin havulinjan valkaisusäätömenetelmän käyttöönoton vaikutukset klooridioksidikulutuksiin ja sellun laatuun vertailemalla uuden ja vanhan säätömenetelmän aikaisia kemikaalikulutuksia sekä välikappaluvun ja loppuvaaleuden itseisarvopoikkeamia tavoitteistaan. Lisäksi selvitettiin annossäätöön ja kompensoituun vaaleussäätöön perustuvan vanhan sekä kompensoitua kappakerroinsäätöä soveltavan uuden säätömenetelmän toimintaperiaatteet. Työssä kartoitettiin myös valkaisulinjan tarpeet uusille mittalaitteille sekä analysaattorin mittausten vertailukelpoisuus laboratorioanalyysien kanssa. Edelleen työssä arvioitiin tehtaan X koivuvalkaisulinjan uuden säätömenetelmän toimivuus. Kompensoidun kappakerroinsäädön käyttöönoton myötä valkaisun klooridioksidikulutukset pienenivät sekä välikappaluku ja loppuvaaleus saatiin pidettyä lähempänä tavoitteittaan. Säätömenetelmän toimivuuttaedisti vaaleusanalysaattoreiden mittausten korreloivuus laboratorioanalyysien kanssa. Vastaavat vaikutukset kemikaalikulutuksiin ja sellun laatuun havaittiin myös tehtaan X valkaisusäädön käyttöönotosta.

Modeling growth and yield of loblolly pinestands under intensive management

Abstract:The objective of this work was to develop and validate a prognosis system for volume yield and basal area of intensively managed loblolly pine (Pinus taeda) stands, using stand and diameter class models compatible in basal area estimates. The data used in the study were obtained from plantations located in northern Uruguay. For model validation without data loss, a three-phase validation scheme was applied: first, the equations were fitted without the validation database; then, model validation was carried out; and, finally, the database was regrouped to recalibrate the parameter values. After the validation and final parameterization of the models, a simulation of the first commercial thinning was carried out. The developed prognosis system was precise and accurate in estimating basal area production per hectare or per diameter classes. There was compatibility in basal area estimates between diameter class and whole stand models, with a mean difference of -0.01 m2ha-1. The validation scheme applied is logic and consistent, since information on the accuracy and precision of the models is obtained without the loss of any information in the estimation of the models' parameters.

Optimal Mechanical PulpingProcesses for Eucalyptus, Acacia and Birch

Tässä diplomityössä tutkittiin ja vertailtiin eukalyptuksen, akaasian ja koivun kemimekaanista kuiduttamista ja valkaisua. Yleensä näitä puulajeja käytetään sellun keittoon. Puulajit eroavat toisistaan kasvupaikan ja kuiturakenteen osalta. Eukalyptus ja akaasia ovat niin sanottuja trooppisia lehtipuita, kun taas koivu kasvaa pohjoisilla vyöhykkeillä. Koivulla on kookkaimmat kuidut ja akaasialla pienimmät kuidut. Myös näiden lajien putkilot eroavat toisistaan. Koivun putkilot ovat pitkiä ja kapeita, kun taas eukalyptuksen ja akaasian putkilot ovat lyhyitä ja leveitä. Prosessiksi valittiin kaksivaiheinen APMP-prosessi. Koeajot tehtiinKeskuslaboratorio Oy:ssä. Massoille asetettiin seuraavat tavoitteet: freeness 150-200 ml ja vaaleus 80 %ISO. Eukalyptukselle ja koivulle tehtiin kaksi erilaista impregnointisarjaa, mutta akaasialle vain yksi. Jauhatuksen viimeisessä vaiheessa kokeiltiin myös jauhinvalkaisua. Jauhatuksen energiankulutus oli korkea varsinkin eukalyptuksella ja akaasialla. Jotta energiankulutus saataisiin pienemmäksi, tulisi käyttää enemmän lipeää, mutta se johtaa alkalitummumiseen. Lopuksi massat valkaistiin laboratoriossa. Eukalyptus ja koivu pystyttiin valkaisemaan vaaleuteen 80 %ISO, mutta eukalyptuksen valkaisu vaati enemmän peroksidia kuin koivun valkaisu. Akaasian lähtövaaleus oli niin alhainen, ettei siinä päästy tavoitevaaleuteen. Eukalyptuksella on parempi valonsironta ja paremmat lujuusominaisuudet kuin koivulla. Kemimekaanista massaa voidaan käyttää hienopaperissa parantamassa jäykkyyttä, bulkkia ja valonsirontaa, mutta usein ongelmana on alhainen vaaleus ja huono vaaleuden pysyvyys. Kemimekaanista massaa voidaankäyttää missä tahansa mekaanisissa painopapereissa. Mekaanisissa painopapereissa kemimekaanisella lehtipuumassalla voidaan korvata mekaanista havupuumassaa. Akaasia on niin tummaa, ettei sitä voida käyttää korkeavaaleuksisiin papereihin. Eukalyptus ja koivu ovat vaaleampia ja helpompia valkaista kuin akaasia, mutta myös niillä on niin huono vaaleudenpysyvyys että käyttö hienopapereissa on rajoittunutta. Mekaanisille eukalyptus ja koivumassoille hienopaperia parempi käyttökohde on mekaaniset painopaperit, kuten MWC-paperi.