Multiple facets of secretory immunoglobulin A at mucosal surfaces

Résumé : Le condylome acuminé anal (CAA), transmis par contact sexuel, résulte d'une infection par Human Papilloma Virus (HPV). Son traitement chirurgical est grevé d'un taux de récidive de 4-29%. Le but de cette étude était d'identifier une éventuelle corrélation entre type d'HPV présent dans les CAA excisés chirurgicalement et taux de récidive de la maladie, ? Cette étude rétrospective porte sur 140 patients opérés au Centre Hospitalier Universitaire Vaudois de CAA, entre 1990 et 2005. Le diagnostic lésionnel a été confirmé par un examen histomorphologique. Le(s) type(s) d'HPV présent(s) dans ces lésions a été déterminé par Polymerase Chain Reaction (PCR). Les patients ont donné leur accord à cette analyse et complété un questionnaire. Une éventuelle corrélation entre récidive de CAA, type d'HPV et status HIV a été recherchée. HPV 6 et 11 sont les virus les plus fréquemment découverts (51% et 28%, respectivement) chez les 140 patients (123H/17F). Trente-cinq (25%) d'entre eux ont présenté une récidive. HPV 11 était present chez 19 (41%) sujets. Ceci est statistiquement significatif (P<0.05), en comparaison aux autres HPVs. Il n'y a par contre pas de différence significative entre la fréquence de récidive des 33 (24%) patients HIV-positifs et le reste du collectif. HPV 11 est donc associé à un taux de récidive de CAA significativement élevé. Un suivi strict des patients atteints est nécessaire pour identifier une récidive et la traiter sans délai, notamment lorsque HPV 11 est present. Ces résultats innovateurs soulèvent la question de la nécessité de pratiquer une typisation virale systématique sur les lésions excisées. La justification d'une telle attitude demande toutefois encore d'être confirmée.

Preliminary regional rockfall hazard mapping using LIDAR-based slope frequency distribution and CONEFALL modeling

A factor limiting preliminary rockfall hazard mapping at regional scale is often the lack of knowledge of potential source areas. Nowadays, high resolution topographic data (LiDAR) can account for realistic landscape details even at large scale. With such fine-scale morphological variability, quantitative geomorphometric analyses become a relevant approach for delineating potential rockfall instabilities. Using digital elevation model (DEM)-based ?slope families? concept over areas of similar lithology and cliffs and screes zones available from the 1:25,000 topographic map, a susceptibility rockfall hazard map was drawn up in the canton of Vaud, Switzerland, in order to provide a relevant hazard overview. Slope surfaces over morphometrically-defined thresholds angles were considered as rockfall source zones. 3D modelling (CONEFALL) was then applied on each of the estimated source zones in order to assess the maximum runout length. Comparison with known events and other rockfall hazard assessments are in good agreement, showing that it is possible to assess rockfall activities over large areas from DEM-based parameters and topographical elements.

Generación de visitas virtuales a museos 3D para la inclusión en páginas web

Las páginas web junto a la animación 3D son dos grandes atractivos hoy en día en el mundo de Internet. Una interfaz web agradable e interactiva por la que navegar cómodamente; junto a una herramienta en dos dimensiones fácil de manejar, para diseñar y obtener un resultado en tres dimensiones. Esas han sido las bases de mi aplicación, la cual consiste en una página web dedicada al arte, donde cualquier persona podrá registrarse y dibujar mediante una paleta cómo sería un museo a su gusto. Visitando el museo virtual resultante, donde admirar las obras junto a su autor y título.

Gestión y visualización de museos virtuales 3d en línea

Esta aplicación constará de una herramienta para administradores que permitirá ver una sala de exposiciones virtual vacía, y una biblioteca de obras de arte; se podrán añadir y quitar obras de la sala de exposiciones arrastrándolas de/a la biblioteca, creando así galerías de arte virtuales. Estas galerías se podrán visualizar por cualquier persona con un explorador web.

Superiority of prone position in free-breathing 3D coronary MRA in patients with coronary disease.

Navigator-gated and corrected 3D coronary MR angiography (MRA) allows submillimeter image acquisition during free breathing. However, cranial diaphragmatic drift and relative phase shifts of chest-wall motion are limiting factors for image quality and scanning duration. We hypothesized that image acquisition in the prone position would minimize artifacts related to chest-wall motion and suppress diaphragmatic drift. Twelve patients with radiographically-confirmed coronary artery disease and six healthy adult volunteers were studied in both the prone and the supine position during free-breathing navigator-gated and corrected 3D coronary MRA. Image quality and the diaphragmatic positions were objectively compared. In the prone position, there was a 36% improvement in signal-to-noise ratio (SNR; 15.5 +/- 2.7 vs. 11.4 +/- 2.6; P < 0.01) and a 34% improvement in CNR (12.5 +/- 3.3 vs. 9.3 +/- 2.5, P < 0.01). The prone position also resulted in a 17% improvement in coronary vessel definition (P < 0.01). Cranial end-expiratory diaphragmatic drift occurred less frequently in the prone position (23% +/- 17% vs. 40% +/- 26% supine; P <0.05), and navigator efficiency was higher. Prone coronary MRA results in improved SNR and CNR with enhanced coronary vessel definition. Cranial end-expiratory diaphragmatic drift also was reduced, and navigator efficiency was enhanced. When feasible, prone imaging is recommended for free-breathing coronary MRA.

Comparison of Methods for Evaluation of the Bactericidal Activity of Copper-Sputtered Surfaces against Methicillin-Resistant Staphylococcus aureus.

Bacteria can survive on hospital textiles and surfaces, from which they can be disseminated, representing a source of health care-associated infections (HCAIs). Surfaces containing copper (Cu), which is known for its bactericidal properties, could be an efficient way to lower the burden of potential pathogens. The antimicrobial activity of Cu-sputtered polyester surfaces, obtained by direct-current magnetron sputtering (DCMS), against methicillin-resistant Staphylococcus aureus (MRSA) was tested. The Cu-polyester microstructure was characterized by high-resolution transmission electron microscopy to determine the microstructure of the Cu nanoparticles and by profilometry to assess the thickness of the layers. Sputtering at 300 mA for 160 s led to a Cu film thickness of 20 nm (100 Cu layers) containing 0.209% (wt/wt) polyester. The viability of MRSA strain ATCC 43300 on Cu-sputtered polyester was evaluated by four methods: (i) mechanical detachment, (ii) microcalorimetry, (iii) direct transfer onto plates, and (iv) stereomicroscopy. The low efficacy of mechanical detachment impeded bacterial viability estimations. Microcalorimetry provided only semiquantitative results. Direct transfer onto plates and stereomicroscopy seemed to be the most suitable methods to evaluate the bacterial inactivation potential of Cu-sputtered polyester surfaces, since they presented the least experimental bias. Cu-polyester samples sputtered for 160 s by DCMS were further tested against 10 clinical MRSA isolates and showed a high level of bactericidal activity, with a 4-log(10) reduction in the initial MRSA load (10(6) CFU) within 1 h. Cu-sputtered polyester surfaces might be of use to prevent the transmission of HCAI pathogens.

An Assessment of the Microbiology of Hand Contact Surfaces in the Retail Environment

This study aimed to assess the microbiology of food and hand contact surfaces in the retail environment and the potential for these surfaces to act as vehicles for the spread of foodborne pathogens. During the survey, 10 stores in the Republic of Ireland (ROI) were visited by student Environmental Health Officers (EHOs) who took swab samples from four surfaces: conveyor belts, long-life shopping bags, shopping trolley handles and keypads on card payment units. The swab samples were examined for the presence of the pathogens Salmonella, Campylobacter and Listeria. The Aerobic Colony Counts, as well as the levels of E. coli and Enterobacteriaceae, were also determined. In addition, structured questionnaires were used with retailers to establish the stores’ regimes for the cleaning of conveyor belts. Similarly, shoppers donating their long-life shopping bags for sampling were questioned about how they normally use these bags, and the results were compared with those from the microbiological survey. The results indicated that the hygiene of the surfaces sampled was good, with Salmonella, Campylobacter and Listeria not detected in any of the samples, and levels of both Enterobacteriaceae and E. coli were below the limits of detection in all but one sample. Aerobic Colony Counts varied but none of the results obtained would be deemed ‘unacceptable’ or ‘unsatisfactory’ under guidelines for ready-to-eat foods

Use of quantum dots in aqueous solution to detect blood fingermarks on non-porous surfaces.

A new and original reagent based on the use of highly fluorescent cadmium telluride (CdTe) quantum dots (QDs) in aqueous solution is proposed to detect weak fingermarks in blood on non-porous surfaces. To assess the efficiency of this approach, comparisons were performed with one of the most efficient blood reagents on non-porous surfaces, Acid Yellow 7 (AY7). To this end, four non-porous surfaces were studied, i.e. glass, transparent polypropylene, black polyethylene, and aluminium foil. To evaluate the sensitivity of both reagents, sets of depleted fingermarks were prepared, using the same finger, initially soaked with blood, which was then successively applied on the same surface without recharging it with blood or latent secretions. The successive marks were then cut in halves and the halves treated separately with each reagent. The results showed that QDs were equally efficient to AY7 on glass, polyethylene and polypropylene surfaces, and were superior to AY7 on aluminium. The use of QDs in new, sensitive and highly efficient latent and blood mark detection techniques appears highly promising. Health and safety issues related to the use of cadmium are also discussed. It is suggested that applying QDs in aqueous solution (and not as a dry dusting powder) considerably lowers the toxicity risks.

Imaging and quantifying salt-tracer transport in a riparian groundwater system by means of 3D ERT monitoring

Determining groundwater flow paths of infiltrated river water is necessary for studying biochemical processes in the riparian zone, but their characterization is complicated by strong temporal and spatial heterogeneity. We investigated to what extent repeat 3D surface electrical resistance tomography (ERT) can be used to monitor transport of a salt-tracer plume under close to natural gradient conditions. The aim is to estimate groundwater flow velocities and pathways at a site located within a riparian groundwater system adjacent to the perialpine Thur River in northeastern Switzerland. Our ERT time-lapse images provide constraints on the plume's shape, flow direction, and velocity. These images allow the movement of the plume to be followed for 35 m. Although the hydraulic gradient is only 1.43 parts per thousand, the ERT time-lapse images demonstrate that the plume's center of mass and its front propagate with velocities of 2x10(-4) m/s and 5x10(-4) m/s, respectively. These velocities are compatible with groundwater resistivity monitoring data in two observation wells 5 m from the injection well. Five additional sensors in the 5-30 m distance range did not detect the plume. Comparison of the ERT time-lapse images with a groundwater transport model and time-lapse inversions of synthetic ERT data indicate that the movement of the plume can be described for the first 6 h after injection by a uniform transport model. Subsurface heterogeneity causes a change of the plume's direction and velocity at later times. Our results demonstrate the effectiveness of using time-lapse 3D surface ERT to monitor flow pathways in a challenging perialpine environment over larger scales than is practically possible with crosshole 3D ERT.

Desenvolupament d'un videojoc 3D basat en OpenGL

En aquest treball es presenta una aplicació gràfica per a desenvolupar un videojoc de tema lliure, amb premisses senzilles però fermes i amb la utilització d'unes eines el funcionament de les qual s'ha assolit durant la carrera i s?ha aprofundit durant el temps que ha durat la confecció d'aquest projecte.

Mecano Virtual 3D

L'objectiu principal d'aquest projecte és crear un mecano virtual amb el qual l'usuari pugui manipular peces per a fer un muntatge i que pugui retocar aquest muntatge com vulgui.

Wet chemical silver treatment of endotracheal tubes to produce antibacterial surfaces.

Mechanically ventilated patients in hospitals are subjected to an increased risk of acquiring nosocomial pneumonia that sometimes has a lethal outcome. One way to minimize the risk could be to make the surfaces on endotracheal tubes antibacterial. In this study, bacterial growth was inhibited or completely prevented by silver ions wet chemically and deposited onto the tube surface. Through the wet chemical treatment developed here, a surface precipitate was formed containing silver chloride and a silver stearate salt. The identity and morphology of the surface precipitate was studied using x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and x-ray powder diffraction. Leaching of silver ions into solution was examined, and bacterial growth on the treated surfaces was assayed using Pseudomonas aeruginosa wild type (PAO1) bacteria. Furthermore, the minimum inhibitory concentration of silver ions was determined in liquid- and solid-rich growth medium as 23 and 18 microM, respectively, for P. aeruginosa.

PANG 3D

El projecte consisteix en una versió 3D del famós joc Pang. El joc original va ser publicat per Mitchell, una companyia que ja no existeix, el 1989 en format COIN-OP1. Des de la seva data de publicació va representar un gran èxit de públic i de vendes per a la companyia, que en va treure algunes versions més.