Chromatin and morphometry alterations of bovine sperm head after Percoll (TM) density gradient centrifugation

The aim of this work was to assess the morphometry and chromatin integrity of bovine sperm head after a three layers discontinuous Percoll (TM) density gradient centrifugation. Frozen semen doses were obtained from six bulls of different breeds, including three taurine and three Zebu animals. Three ejaculates per bull were evaluated. The semen doses were thawed and two smears were made from each sample before (control) and after the Percoll (TM) centrifugation (Percoll (TM) group). The smears were stained with toluidine blue and grayscale digital images were captured and processed in Scilab environment software. It was observed that chromatin heterogeneity was reduced (P<0.05) and chromatin decondensation was increased (P<0.05) after the Percollm treatment utilized. In addition, it was observed that sperm head length was higher (P<0.05) and the side symmetry was lower (P<0.05) in centrifuged sperm cells. When analyzed separately by subspecies, it was observed that the decrease (P<0.05) in chromatin heterogeneity and the increase (P<0.05) in chromatin decondensation occurred in Zebu sperm heads. In addition, the length and the width:length ratio of sperm heads was affected by Percoll (TM) centrifugation in Zebu semen. In conclusion, the three layers discontinuous Percoll (TM) centrifugation increased the chromatin decondensation and the morphometric alterations of frozen-thawed bovine semen. However, the real implication of these findings in fertility rates of centrifuged sperm must be investigated. (C) 2011 Elsevier B.V. All rights reserved.

Acidentes de Trabalho : análise em profissionais de enfermagem que atuam nas unidades de terapia intensiva e urgência Natal/RN

It is a descriptive-exploratory research, with a quantitative approach, aiming to characterize typical occupational accident suffered by the professionals from nursery group, in the Intensive Care Units and Emergency in a hospital in Natal-RN, trying to identify the factors that contribute to those accidents; to identify some information taken by those professionals related to the accident risks; to know the procedures taken after each accident. This sample is composed by 176 professionals that are 44 nurses and 132 nursing technicians/auxiliaries, collected from March to April 2010. The results related to the personal characterization of the nursery group showed that 31 (18.61%) are between the 36-40 years of age; 148 (84.09%) females and 96 (55.68%) had finished High School. Related to the professional characterization, 53 (30.11%) are nurses, and 123 (69.88%) nursing technicians and auxiliaries; 44 (25.00%) are working as nurses, and 132 (75.00%) as nursing technicians and auxiliaries; 45 (25.56%) are working in the nursery area between 15 to 20 years and 11 months; 53 (30.11%) are in this institution between 10 to 14 years and 11 months; 79 (44.88%) work in the ICU; 55 (31.25%) are working in this area from 1 to 4 years and 11 months; 110 (62.50%) like to work in this area; 161 (91.47%) work 30 to 40 hours per week; 90 (51,13%) have another employment. Related to knowledge about typical occupational accident, 167 (94.88%) said they know about it; 96 (54.54%) know the accident rules; 103 (58.52%) think it is important to talk about this subject in the nursery courses; 92 (52.27%) said this subject is important to be discussed in the work and 372 (87.73%) think education is necessary to reduce accident. Related to the data about accidents, 104 (59.09%) have suffered typical occupational accident, among them 69 (39.20%) have suffered it once; 47 (36.19%) did not register any accident; 60 (57.69%) were caring some patient during the accident; 47 (45.19%) of them occurred in the ICU; 50 (48.07%) professionals were working during the night period; 69 (66.34%) have suffered perforation; 86 (82.69%) had upper limbs affected; 64 (61.53%) were affected by needle; about the reason of the accident, 89 (60.54%) said it occurred due to carelessness. Related to the accident evolution, 88 (85.57%) did not need to remain off work after accident; 13 (81.25%) remained off work during 15 days; 87 (83.65%) had no sequelae and for 101 (97.11%) it was not necessary rehabilitation. We conclude that typical occupational accident can occur with young workers who admit a knowledge about the subject, however they do almost nothing to prevent it. We believe this research has contributed to the characterization of this kind of accident suffered by the nursery group of a public hospital in Natal, and it can stimulate the creation and reformulation of personal protection against typical occupational accident suffered by nursery professionals

Análise e síntese de antenas e superfícies seletivas de frequência utilizando computação evolucionária e inteligência de enxames

The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm

Adição de geomanta e tecido não tecido de polipropileno em cimentos geopoliméricos de pega rápida

Geopolymers are cementing materials that depict a number of advantages compared to Portland cement. Contrary to the latter, geopolymers are synthesized at room temperature, thus significantly reducing the emission of CO2 to the atmosphere. Moreover, the composition and synthesis reactions can be tailored to adjust the setting time of the material as well as its compressive mechanical strength. It is then possible to produce geopolymeric cements with short setting times and high compressive strength, although relatively brittle. The objective of the present study was to produce and characterize composite materials by reinforcing fastsetting geopolymeric matrixes with polypropylene geosynthetics (geomats and geotextiles) in an attempt to improve the toughness and tensile strength of the cementing material. Geosynthetics have been increasingly used to reinforce engineering structures, providing higher strength and better toughness. In particular, polypropylene nonwoven and geomats depict other attractive properties such as low density, durability, impact absorption and resistance to abrasion. Fast-setting geopolymers were then synthesized and reinforced with polypropylene nonwoven and geomats. The mechanical strength of the materials, reinforced or not, was characterized. The results showed that relatively short setting times and adequate flowing behavior were achieved by adjusting the composition of the geopolymer. In addition, it is possible to improve the fracture resistance of geopolymeric cements by adding polypropylene geosynthetics. The best results were achieved by reinforcing geopolymer with polypropylene TNT

Desenvolvimento e caracterização de soluções ternárias água-glicerol-propilenoglicol como fluido refrigerante secundário

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Avaliação da eficiência da remoção de matéria orgânica e microbiológica de três sistemas de lagoas de estabilização em série na Grande Natal-RN: Beira Rio, Jardim Lola I e Jardim Lola II

Waste stabilization ponds are the main technology in use for domestic sewage treatment in Rio Grande do Norte State (RN), northeast Brazil. The are around 80 systems, constructed mainly by municipal city halls, being series comprised by a primary facultative pond followed by two maturation ponds the most used configuration. Due to problems related with the production and destination of sludge and generation of bad odors, the designers have avoided the use of anaerobic lagoons. The majority of systems are rarely monitored to verify their efficiencies and to get new project parameters for future designing. This work has as purpose to make a diagnosis of efficiency of three series of waste stabilization pond series (WSPS) of Jardim Lola 1, Jardim Lola 2 and Beira Rio, located in the North Zone of the city of the Natal/RN, treating domestic raw sewage, on the removal of organic matter and thermotolerant coliform, comparing the operational conditions of the systems this inside of the bands foreseen in the project, through parameters BOD5, QOD, thermotolerant coliforms, dissolved oxygen, pH, temperature, ammoniac nitrogen, total and suspended solids. The work was carried through in the WSPS, all constituted by a primary facultative pond followed by two maturation ponds. Socioeconomic characteristics of population are predominantly low and all the plants are very near of the contributing basins. The series were monitored from of May the November of 2002, totalizing 20 collections of grab samples of raw sewage and ponds effluents between 8:00 and 9:50 h. The main aspect to be detached by the results was the great concentration of organic matter (BOD and COD) and microorganisms the raw sewage which were around two times more concentrated than those values foreseen one in project. Considering all series the highest removals of organic matter were observed in system Beira Rio (84 and 78% of BOD and COD, respectively), which presented high hydraulic detention time (TDH = 89 days). On the other hand, Jardim Lola 1 and Jardim Lola 2 presented a much lower values of HDT (36 days and 18 days respectively) and their removals of BOD and COD were the same (76% and 60%, respectively). The Beira Rio WSPS, was the most efficient verified in relation to solids and ammonia, proving the great influence of the operational variables such as HDT and applied surface organic loadings on the performance of pond series. Although the treatment plants have reached efficiencies of thermotolerant coliforms around 99,999%, the concentrations in the final effluent can be considered very high for launching in aquatic bodies, particularly those produced by Jardim Lola 1 and Jardim Lola 2 series

Aerofotos convencionais e imagens orbitais TM/LANDSAT no mapeamento morfopedológico em Santa Bárbara D'Oeste (SP)

Foram estudados, com o auxílio de fotografias aéreas, aspectos qualitativos e quantitativos do relevo e da rede de drenagem de solos de uma área de Santa Bárbara D'Oeste, SP. Esta região compreende 14.625 ha, onde foram selecionadas bacias hidrográficas de 3ª ordem de ramificação e amostras circulares de 5km². As unidades de mapeamento simples ou associações de solos são: Latossolo Vermelho Escuro, Podzólico, Litossolo + Podzólico, Terra Roxa Estruturada + Latossolo Roxo distrófico. Após a caracterização das feições fisiográficas, da área de ocorrência desses solos, foram realizados dois mapas morfopedológicos. No primeiro utilizou-se fotografias aéreas verticais pancromáticas na escala 1: 35.000 (data de 25/6/78) e no segundo imagens orbitais do sensor Thematic Mapper do LANDSAT-5, nas bandas 3, 4 e 5 e composição colorida 3/4/5 na escala 1: 100.000 (data de 12/9/91). As análises qualitativas e quantitativas do relevo (índice de declividade média) e rede de drenagem (densidade de drenagem, freqüência de rios, razão de textura) mostraram-se eficientes na diferenciação das unidades de solo estudadas, tanto em bacias hidrográficas como em amostras circulares. A utilização de fotografias aéreas, permitiu maior riqueza de detalhes na precisão dos limites das unidades de mapeamento e no maior número de unidades de mapeamento discriminadas em relação as imagens orbitais. A composição colorida 3/4/5 permitiu diferenciar os Latossolos argilosos dos Latossolos de textura média, assim como o Latossolo Húmico.

A influência do status social no forrageio de itens camuflados e avermelhados em sagüis (Callithrix jacchus) cativos

Seeing colors can be advantageous, because they are an important signal for providing information about the environment, such as the location of food. However, not every animals sees these chromatic signals in the same way. In primates, the group of Plathyrrhini has polymorphic sex-linked vision with males always dichromats and dichromats or trichromats females. Studies indicate that trichromats during foraging would benefit by seeing better than dichromats ripe fruits against the green foliage background. On the other hand, dichromats appear to distinguish camouflaged insects better than trichromats. The marmoset (Callihtrix jacchus) is a neotropical primate species that have color vision polymorphism. This species establishes family groups with highly reproductive bias, with breeding females often having preferential access to food. This work aims to study whether the social context influences the foraging ability of camouflaged and red items in groups of C. jacchus. Four groups of captive marmosets were presented to four food tasks, involving difficult, easy, reddish and camouflaged food targets. Foods were presented in a concentrated and dispersed manner, to check whether there was monopolization of the resources by the dominant subjects and if this would affect the ability of individuals to find the food targets. Success was measured by latency to food acquisition and number of targets consumed. Males and females differed in their foraging success for camouflaged and reddish items, although this difference has not appeared in all situations and experimental conditions. In general males were more successful for detecting camouflaged items while females succeeded more in identifying reddish items. There were no differences in foraging success between individuals of different social status, however, there were differences in the success of consumption of food items for different situations when food was concentrate compared with dispersed food. Taken as a role, there was a greater difficulty in detecting food items when they were presented in concentrated arrangement, which is supposed to be related to a higher difficulty to approach and stay near the food. Although it appears that there was no direct competition seems to have group's indirect influence on the detection of food items and foraging success of individuals, affecting mainly those items more difficult to detect

Tecnologia eletroquímica como tratamento alternativo de efluentes têxteis sintéticos utilizando ânodos de platina e diamante

In this work, the treatment of synthetic wastewaters containing Remazol Red BR (RRB) and Novacron Blue C-D (NB) by anodic oxidation using boron doped diamond anodes (BDD) and Novacron Yellow (YN) using BDD and Platinum (Pt) anodes was investigated. Galvanostatic electrolyses of RRB and NB synthetic wastewaters have led to the complete decolorization removal at different operating conditions (current density, pH and temperature). The influence of these parameters was investigated in order to find the best conditions for dyestuff colour removal. According to the experimental results obtained, the electrochemical oxidation process is suitable for decolorizing wastewaters containing these textile dyes, due to the electrocatalytic properties of BDD and Pt anode. Energy requirements for removing colour during galvanostatic electrolyses of RRB, NB and YN synthetic solutions depends mainly on the operating conditions; for example for RRB, it passes from 3.30 kWh m-3 at 20 mA cm-2 to 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH = 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (data estimated per volume of treated effluent). In order to verify the Brazilian law regulations of NB and RRB synthetic solutions after electrochemical decolourisation treatment, Hazen Units values were determined and the total colour removal was achieved; remaining into the regulations. Finally, electrical energy cost for removing colour was estimated

Análise bromatológica de carnes antes e após o processamento para obtenção de charque

The process of salting and drying in the sun is used to preserve meat since the beginning of civilization. There is evidence that this preservation technique has arisen in Egypt, between 4,000 and 5,000 years ago. In our country, according to literature, was the first industrial product that gave the appearance of beef jerky, beef being produced, where about 70% to 75% of the muscle is composed of water, where it will be around 45% as a final product, according to the law in his article RIISPOA No. 432 provides that the jerky should contain no more than this amount of moisture in the muscular portion, or more than 15% of total ash with tolerance of up to 5% variation . Besides this parameter, proteins, lipids, ash, and minerals were analyzed in samples before and after the manufacturing process to know the content of these nutrients. Since these are considered important in product quality, thus the concentration in these samples, respectively, in the flesh Front (CD and CHD) before and after the manufacturing process for humidity were respectively 75.28% and 47.38% , the protein was 14.17 and 22.20 g / 100 g sample, 6.360 and 4.251 of lipids g/100g of the sample, and the ashes 0.974 9.144 g/100g sample, minerals like calcium and 4.074 30 , 06 ppm, sódio0, 055 and 5.401 g / L, sodium chloride, 0.139 and 13.74 g / L, potassium 237.5 and 166.8 ppm, 1.721 and 3.295 ppm iron, 0.143 and 0.135 ppm phosphorus, zinc and 4.690 6.905 ppm; magnésio14, 63 e13, 75 ppm manganese .017 e0, 007ppm, copper 0.057 and 0.039 ppm in the case of needle-type meat (CPA and CHPA), 68.04% and 44.17%, protein 13 , 72, and 24.42 g/100g of sample, 1.137 in the ash and 12.68 g / 100g of sample, and the minerals calcium 17.11 and 12.89 ppm; sódio0, 123 and 4.871 g / L, sodium chloride 0.312 and 12.39 g / L, potassium 305.3 and 182.1 ppm; ferro1, 817 and 1.513 ppm, 0.273 and 0.139 ppm phosphorus, zinc 6.305 and 4.783 ppm, 27.95 and 15.85 ppm magnesium, manganese and 0.025 0.011 ppm, 0.057 and 0.143 ppm copper and chromium 0.014 and 0.068 ppm

Avaliação do atendimento anestésico da criança e do adolescente em um hospital universitário

JUSTIFICATIVA E OBJETIVOS: Qualidade em anestesia e na satisfação dos pacientes têm tido acentuado destaque. O objetivo foi avaliar o atendimento anestésico de crianças e adolescentes, entrevistando seus responsáveis. MÉTODO: Foram entrevistados 230 responsáveis por crianças e adolescentes submetidos à anestesia no período compreendido entre abril e dezembro de 2003. Realizou-se entrevista na visita pós-operatória através de questionário com quatro itens: identificação das crianças e de adolescentes e seus responsáveis (item 1); esclarecimentos na visita pré-anestésica (item 2), quanto à anestesia (item 3) e à recuperação pós-anestésica (SRPA) (item 4), determinando-se quem dera as informações aos entrevistados e se houvera complicação no pós-anestésico. O responsável atribuiu nota de 0 a 10 ao Serviço de Anestesiologia. RESULTADOS: A pesquisa foi respondida pela mãe em 189 (82,2%) casos. A maioria dos entrevistados, 114 (75,6%), tinha entre 20 e 39 anos, era casada (148 a 64,3%) e 140 (60,9%) não tinham ocupação. Para 89%, o anestesiologista se identificou; para 37% e 77,4%, esclareceu sobre importância e tempo do jejum; 82%, sobre anemia; 90%, alergia; 46,8%, importância da SRPA; 42,2%, tempo de permanência; 72,9%, estado de saúde de sua criança. Não houve apreensões para 49%, 58% e 58%, respectivamente, no pré, intra e pós-anestésico. Gostariam de ter estado com sua criança/adolescente na chegada à SRPA 78,9%. Foram relacionadas preocupações no período pré, intra e pós-anestésico com o sexo e a idade do paciente - não ter tido nenhuma preocupação - maioria dos entrevistados - e com a escolaridade do entrevistado - quanto mais completa, menor foi o número e a variedade das preocupações relatadas. As notas atribuídas ao Serviço de Anestesiologia tiveram maior freqüência entre 7 e 10 (97,4%). CONCLUSÕES: Considera-se que o Serviço de Anestesiologia desenvolve bom trabalho, apesar de falhas na comunicação, que são de solução simples e dependem mais da vontade do serviço que de seu conhecimento científico.

Detecção de áreas degradadas na sub-bacia hidrográfica do rio taperoá/pb, utilizando parâmetros físicos dos sensores modis/terra e tm/landsat

This study includes the results of the analysis of areas susceptible to degradation by remote sensing in semi-arid region, which is a matter of concern and affects the whole population and the catalyst of this process occurs by the deforestation of the savanna and improper practices by the use of soil. The objective of this research is to use biophysical parameters of the MODIS / Terra and images TM/Landsat-5 to determine areas susceptible to degradation in semi-arid Paraiba. The study area is located in the central interior of Paraíba, in the sub-basin of the River Taperoá, with average annual rainfall below 400 mm and average annual temperature of 28 ° C. To draw up the map of vegetation were used TM/Landsat-5 images, specifically, the composition 5R4G3B colored, commonly used for mapping land use. This map was produced by unsupervised classification by maximum likelihood. The legend corresponds to the following targets: savanna vegetation sparse and dense, riparian vegetation and exposed soil. The biophysical parameters used in the MODIS were emissivity, albedo and vegetation index for NDVI (NDVI). The GIS computer programs used were Modis Reprojections Tools and System Information Processing Georeferenced (SPRING), which was set up and worked the bank of information from sensors MODIS and TM and ArcGIS software for making maps more customizable. Initially, we evaluated the behavior of the vegetation emissivity by adapting equation Bastiaanssen on NDVI for spatialize emissivity and observe changes during the year 2006. The albedo was used to view your percentage of increase in the periods December 2003 and 2004. The image sensor of Landsat TM were used for the month of December 2005, according to the availability of images and in periods of low emissivity. For these applications were made in language programs for GIS Algebraic Space (LEGAL), which is a routine programming SPRING, which allows you to perform various types of algebras of spatial data and maps. For the detection of areas susceptible to environmental degradation took into account the behavior of the emissivity of the savanna that showed seasonal coinciding with the rainy season, reaching a maximum emissivity in the months April to July and in the remaining months of a low emissivity . With the images of the albedo of December 2003 and 2004, it was verified the percentage increase, which allowed the generation of two distinct classes: areas with increased variation percentage of 1 to 11.6% and the percentage change in areas with less than 1 % albedo. It was then possible to generate the map of susceptibility to environmental degradation, with the intersection of the class of exposed soil with varying percentage of the albedo, resulting in classes susceptibility to environmental degradation

Sorologia Anti PGL-1 e risco de ocorrência de hanseníase em área de alta endemicidade do Estado de São Paulo: quatro anos de seguimento

Os testes sorológicos para diagnóstico de hanseníase, usando o glicolipídeo-fenólico-1 (PGL-1), considerado antígeno específico do M. leprae, têm aberto algumas possibilidades de estudo do comportamento epidemiológico desta doença. Algumas questões, como tempo de latência da doença, infecção subclínica e importância do contato intra-domiciliar (contatos) no controle da endemia, puderam ser melhor analisadas usando este instrumental. Este estudo teve por objetivo verificar a existência de associação entre a situação sorológica e a ocorrência de hanseníase. Foram seguidas, durante 4 anos, 6.520 pessoas com idade igual ou superior a 5 anos, submetidas no início do seguimento ao teste sorológico Anti PGL-1, pertencentes ao universo de 7.416 habitantes da área urbana de um município paulista caracterizado por elevada endemicidade de hanseníase. Foi identificado um grupo de 590 indivíduos soropositivos (9,0 %). Foram diagnosticados, no período, 82 casos novos de hanseníase, 26 no grupo de soropositivos (441 casos novos/10.000 indivíduos) e 48 no de soronegativos (81/10.000). Entre os que não fizeram sorologia, surgiram 8 casos novos (89/10.000). Procurou-se controlar, na análise, a condição de contato, dado que a taxa de soropositividade padronizada por idade e sexo era de 9,61% no grupo de contatos e 7,65% no de não-contatos. Tomando-se os não-contatos soronegativos como o grupo de não expostos, foram calculados os riscos relativos de adoecimento no período, a partir das taxas de detecção padronizadas por idade, resultando no seguinte: os contatos ID soropositivos apresentaram a taxa de 1.704/10.000, 27 vezes maior que a dos não-expostos, igual a 63/10.000; os não-contatos soropositivos e os contatos soronegativos apresentaram taxas, respectivamente, de 274 e 198/10.000, ambas maiores que as dos não-expostos e iguais entre si. A soropositividade associou-se à elevação de 8,6 vezes do risco de hanseníase entre os contatos e de 4,4 entre os não-contatos. Na situação epidemiológica estudada, caracterizada por elevada endemicidade de hanseníase, 50% dos casos novos surgiram entre os não-contatos soronegativos, ou seja, sem fonte de infecção conhecida. Portanto, o teste anti-PGL-1 usado revela-se, na prática, de pouca aplicabilidade. Resta estudar ainda o comportamento da sorologia anti-PGL-1 em áreas de média e baixa endemicidade para que se possa tirar conclusões mais consubstanciadas sobre sua utilidade no controle da endemia. Recomenda-se o aprofundamento das pesquisas sorológicas e de outras que aprimorem o diagnóstico precoce da infecção subclínica, inclusive para detecção de formas paucibacilares, para se ampliar as possibilidades de influir no controle endêmico.

Bond strength of Epiphany (TM) Sealer combined with different adhesive systems photo-activated with LED and QTH

The Epiphany (TM) Sealer is a new dual-curing resin-based sealer and has been introduced as an alternative to gutta-percha and traditional root canal sealers. The canal filling is claimed to create a seal with the dentinal tubules within the root canal system producing a 'monoblock' effect between the sealer and dentinal tubules. Therefore, considering the possibility to incorporate the others adhesive systems, it is important to study the bond strength of the resulting cement. Forty-eight root mandibular canines were sectioned 8-mm below CEJ. The dentine discs were prepared using a tapered diamond bur and irrigated with 1% NaOCl and 17% EDTA. Previous the application Epiphany (TM) Sealer, the Epiphany (TM) Primer, AdheSE, and One Up Bond F were applied to the root canal walls. The LED and QTH (Quartz Tungsten Halogen) were used to photo-activation during 45 s with power density of 400 and 720 mW/cm(2), respectively. The specimens were performed on a universal testing machine at a cross-head speed of 1 mm/min until bond failure occurred. The force was recorded and the debonding values were used to calculate Push-out bond strength. The analysis of variance (ANOVA) and Tukey's post-hoc tests showed significant statistical differences (P < 0.05) to Epiphany (TM) Sealer/Epiphany (TM) Primer/QTH and EpiphanyTM Sealer/AdheSE/QTH, which had the highest mean values of bond strength. The efficiency of resin-based filling materials are dependent the type of light curing unit used including the power density, the polymerization characteristics of these resin-based filling materials, depending on the primer/adhesive used.