Uma arquitetura distribuída de hardware e software para controle de um robô móvel autônomo

In this work, we present a hardware-software architecture for controlling the autonomous mobile robot Kapeck. The hardware of the robot is composed of a set of sensors and actuators organized in a CAN bus. Two embedded computers and eigth microcontroller based boards are used in the system. One of the computers hosts the vision system, due to the significant processing needs of this kind of system. The other computer is used to coordinate and access the CAN bus and to accomplish the other activities of the robot. The microcontroller-based boards are used with the sensors and actuators. The robot has this distributed configuration in order to exhibit a good real-time behavior, where the response time and the temporal predictability of the system is important. We adopted the hybrid deliberative-reactive paradigm in the proposed architecture to conciliate the reactive behavior of the sensors-actuators net and the deliberative activities required to accomplish more complex tasks

Maximização da penetração da geração distribuída através do algoritmo de otimização nuvem de partículas

This work develops a methodology for defining the maximum active power being injected into predefined nodes in the studied distribution networks, considering the possibility of multiple accesses of generating units. The definition of these maximum values is obtained from an optimization study, in which further losses should not exceed those of the base case, i.e., without the presence of distributed generation. The restrictions on the loading of the branches and voltages of the system are respected. To face the problem it is proposed an algorithm, which is based on the numerical method called particle swarm optimization, applied to the study of AC conventional load flow and optimal load flow for maximizing the penetration of distributed generation. Alternatively, the Newton-Raphson method was incorporated to resolution of the load flow. The computer program is performed with the SCILAB software. The proposed algorithm is tested with the data from the IEEE network with 14 nodes and from another network, this one from the Rio Grande do Norte State, at a high voltage (69 kV), with 25 nodes. The algorithm defines allowed values of nominal active power of distributed generation, in percentage terms relative to the demand of the network, from reference values

Restauração automática de redes de distribuição de energia elétrica de grande porte com geração distribuída

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análises e estudos para alocação e ajustes de dispositivos de proteção em redes de média tensão de energia elétrica com geração distribuída

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelo de virtualização distribuída aplicado ao gerenciamento e replicação de cluster multiuso

Pós-graduação em Ciência da Computação - IBILCE

Escalonamento de tarefas em sistemas distribuídos baseado no conceito de propriedade distribuída

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização multiobjetivo na análise da integração de geração distribuída às redes de distribuição

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle da injeção de potências ativa e reativa em inversor de Geração Distribuída conectado à rede de distribuição em corrente alternada em baixa tensão, empregando LMIs com realimentação de estados e critérios de D-estabilidade

Pós-graduação em Engenharia Elétrica - FEIS

Implementação de um nó IEEE 1451, baseado em ferramentas abertas e padronizadas, para aplicações em ambientes de instrumentação distribuída

Pós-graduação em Engenharia Elétrica - FEIS

Usina de geração distribuída de energia elétrica através da incineração de resíduos sólidos com operação ilhada

O trabalho em questão apresenta uma proposta do suprimento de energia elétrica de um alimentador de distribuição pela operação isolada de uma usina geradora de energia elétrica que utiliza como fonte primária a energia calorífica da incineração de resíduos sólidos urbanos. O suprimento proposto é sugerido após a constatação do esgotamento da capacidade da subestação supridora desse alimentador. O esgotamento é verificado a partir de simulações realizadas no sistema de distribuição real da Rede Celpa, localizado na região Nordeste do Estado do Pará, o qual atende os municípios Santa Izabel do Pará, Santo Antonio do Tauá, Colares, Vigia e São Caetano de Odivelas. Nas simulações é utilizado um programa de fluxo de carga desenvolvido especificamente para os sistemas radias de distribuição e da subtransmissão. A proposta de suprimento via geração de energia elétrica através da incineração dos resíduos sólidos urbanos se dá a partir do confronto entre as alternativas de expansão (a alternativa técnica normalmente praticada pela concessionária) e a alternativa técnica-econômica-ambiental sugerida neste trabalho que demonstra as vantagens econômicas, sociais e ambientais da proposta.

Estudo da qualidade da água distribuída pelo poço artesiano da FEG em relação à água servida pelo abastecimento público de Guaratinguetá

We conducted a study of the quality of water distributed by Artesian Well in relation to water supply served by the public for purposes of human consumption of UNESP Campus Guaratinguetá. Two sections of the network were randomly chosen and monitored for 105 days: the stretch of the pipeline started off the Water Treatment Station of the Autonomous Service of Water, Sewage and waste in the Municipality of Guaratinguetá and ended in a point consumption of the Child Family Center, while the section B began at the output of an artesian well and finished in a point of consumption of the Department of Civil Engineering. It is the deterioration of water quality in parts A and B, through comparative analysis of Bicarbonates, Total Hardness, Total Iron, free residual chlorine, pH, Total Residual, Turbidity, Conductivity, Color, Fecal Coliforms and Total Coliforms. Among the observations that can be highlighted: the Total Hardness was found in highest concentration in the extract; for Total Iron significant variations were obtained for both parts, and reduction of this parameter in two points of consumption analyzed, not the expected increase concentration, because the contact of water along the pipe, the CRL showed significant depletion to section A, which can be related to impurities in the water, the presence of biofilm on the walls of pipes, or because this is the stretch of greater extent to be covered by water for pH, this indicated that the water is alkaline and slightly acidic stretch in section B; Turbidity was found for the higher concentration to the passage, and a considerable reduction of this parameter at point consumption due to deposition of particulate matter along the stretch, the conductivity also showed a higher concentration in the extract, as well as an increase in this parameter at the point of consumption. Upon leaving ... (Complete abstract click electronic access below)

WSPControl: aplicação distribuída baseada em Web Services para monitoramento remoto de computadores

The tool proposed, known as WSPControl, enables remote monitoring of computers across the Internet using distributed applications. Through a Web Services architecture is possible the communication between these distributed applications across heterogeneous platforms, also eliminates the need for additional settings in computer networks, such as release of ports or proxy. The tool is divided into three modules, namely: • Client Interface: developed in C Sharp, is responsible for capturing data on performance of the monitored computer also connects to the Web Services to report this data. • Web Services Interface: developed in PHP using the PHP SOAP library, is responsible for facilitating the communication between internet applications and client. • Internet Interface: developed in PHP, is responsible for reading and interpreting the information captured these available on the Internet

Aplicação do conceito de geração distribuída a um sistema fotovoltaico residencial

This work presents a study about distributed generation using photovoltaic systems in the context of smart grids. The characteristics of a Smart Grid and the several aspects this concept involves - distributed generation among them - are discussed. There are also examples of equipment, like smart meters, and of national and international projects. The specificities of distributed generation and the rules and standards necessary in this sort of installation are talked through with focus in the solar energy generation method. Regarding photovoltaic systems, the working principles of the panels are presented, along with its main electrical characteristics and the technologies available. Finally there is a study concerning the sizing of a distributed generation system that involves photovoltaic panels in a residential plant. An analysis of the costs and return of investment period is made about the specific case in consideration.

Localização e preço de contrato ótimo da geração distribuída em sistemas de distribuição radiais de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Avaliação otimizada técnica e econômica do ponto de conexão de geração distribuída em redes de média tensão

Pós-graduação em Engenharia Elétrica - FEIS