951 resultados para urban transport
Resumo:
The second half of the XX century was marked by a great increase in the number of people living in cities. Urban agglomerations became poles of attraction for migration flows and these phenomena, coupled with growing car-ownership rates, resulted in the fact that modern transport systems are characterized by large number of users and traffic modes. The necessity to organize these complex systems and to provide space for different traffic modes changed the way cities look. Urban areas had to cope with traffic flows, and as a result nowadays typical street pattern consists of a road for motorized vehicles, a cycle lane (in some cases), pavement for pedestrians, parking and a range of crucial signage to facilitate navigation and make mobility more secure. However, this type of street organization may not be desirable in certain areas, more specifically, in the city centers. Downtown areas have always been places where economic, leisure, social and other types of facilities are concentrated, not surprisingly, they often attract large number of people and this frequently results in traffic jams, air and noise pollution, thus creating unpleasant environment. Besides, excessive traffic signage in central locations can harm the image and perception of a place, this relates in particular to historical centers with architectural heritage.
Resumo:
Urban mobility is one of the main challenges facing urban areas due to the growing population and to traffic congestion, resulting in environmental pressures. The pathway to urban sustainable mobility involves strengthening of intermodal mobility. The integrated use of different transport modes is getting more and more important and intermodality has been mentioned as a way for public transport compete with private cars. The aim of the current dissertation is to define a set of strategies to improve urban mobility in Lisbon and by consequence reduce the environmental impacts of transports. In order to do that several intermodal practices over Europe were analysed and the transport systems of Brussels and Lisbon were studied and compared, giving special attention to intermodal systems. In the case study was gathered data from both cities in the field, by using and observing the different transport modes, and two surveys were done to the cities users. As concluded by the study, Brussels and Lisbon present significant differences. In Brussels the measures to promote intermodality are evident, while in Lisbon a lot still needs to be done. It also made clear the necessity for improvements in Lisbon’s public transports to a more intermodal passenger transport system, through integration of different transport modes and better information and ticketing system. Some of the points requiring developments are: interchanges’ waiting areas; integration of bicycle in public transport; information about correspondences with other transport modes; real-time information to passengers pre-trip and on-trip, especially in buses and trams. After the identification of the best practices in Brussels and the weaknesses in Lisbon the possibility of applying some of the practices in Brussels to Lisbon was evaluated. Brussels demonstrated to be a good example of intermodality and for that reason some of the recommendations to improve intermodal mobility in Lisbon can follow the practices in place in Brussels.
Resumo:
But La diminution du transport actif scolaire est une problématique préoccupante dont les déterminants sont encore mal connus. Nous nous sommes donc penchée sur la question suivante : Quelle est la contribution de l’environnement bâti pour le choix d’un mode de transport actif pour les déplacements scolaires des enfants demeurant à proximité de leur école ? Méthodologie Pour répondre à cette question, nous nous sommes basée sur le cadre conceptuel de Tracy McMillan. Nous avons caractérisé le voisinage de trois écoles en milieu urbain et de trois écoles en milieu suburbain de la région de Montréal. Également, nous avons analysé les données du Groupe de recherche Ville et mobilité concernant les comportements des enfants ainsi que les comportements et perceptions des parents. Résultats Quatre des cas à l’étude se démarquent en raison de leur forte proportion de transport actif scolaire, soit les trois milieux urbains et un milieu suburbain. Les points communs de ces quatre cas sont la perméabilité du réseau viaire pour les piétons et les cyclistes et la perception favorable des parents vis-à-vis le transport actif scolaire. Conclusion Les environnements suburbains génèrent des comportements de transport actif uniquement chez les enfants alors que les environnements urbains génèrent systématiquement des comportements de transport actif chez les adultes et les enfants. Ce faisant, nous pouvons penser que les caractéristiques de l’environnement bâti des milieux urbains influencent les perceptions et les comportements des parents en faveur du transport actif scolaire.
Resumo:
L’objectif principal de ce mémoire est l’étude de la relation entre le navettage, soit le fait de faire la navette quotidiennement entre le domicile et le travail, et l’épuisement professionnel. Plus précisément, les rôles de modération du moyen de transport et de la région du milieu de travail, tant distinctement que simultanément, sur la relation entre la durée et la distance de navettage et l’épuisement professionnel sont examinés. L’épuisement professionnel a été mesuré grâce au MBI-GS (Maslah Burnout Inventory – General Survey). Les données proviennent de l’étude SALVEO menée au Canada par l’Équipe de Recherche sur le Travail et la Santé Mentale (ERTSM). Les données ont été recueillies entre 2009 et 2012 dans 63 milieux de travail selon un taux de réponse de 71.3 %, équivalent à 2162 employés. Les multiples analyses de régression effectuées sont pamis lespremières à lier significativement le navettage à l’épuisement professionnel. En effet, les navetteurs qui travaillent en grandes régions urbaines sont significativement plus épuisés émotionnellement que les travailleurs des petites régions urbaines ou des régions rurales. Il existe une relation curvilinéaire entre la durée de navettage et la dimension du cynisme. Une relation curvilinéaire existe également entre la durée de navettage et la mesure globale de l’épuisement professionnel. Enfin, le moyen de transport ainsi que la région dans laquelle se situe l’établissement de travail modèrent simultanément la relation entre la durée de navettage et la dimension de l’efficacité professionnelle. Globalement, les résultats suggèrent que le stress de navettage provient de l’ajustement quotidien des travailleurs à leurs conditions de navettage, qui se répercute en emploi. Les organisations devraient donc s’intéresser au développement de pratiques de gestion en ressources humaines misant sur l’amélioration des conditions de navettage de leurs employés. Ces pratiques RH pourraient moduler la relation entre le navettage et les problèmes de santé mentale au travail.
Resumo:
An efficient passenger road transport system is a boon to any city and an inefficient one its bane. Passenger bus transport operation involves various aspects like passenger convenience, profitability of operation and social, technological and environmental factors. The author’s interest in this area was aroused when he conducted a traffic survey of Trivandrum City in 1979. While some studies on the performance of the Kerala State Road Transport Corporation in specific areas like finance, inventory control etc. have already been made, no study has been made from the operational point of view. The study is also the first one of its kind in dealing with the transportation problems for a second order city like Trivandrum. The objective of this research study is to develop a scientific basis for analysing and understanding the various operational aspects of urban bus transport management like assessing travel demand, depot location, fleet allocation, vehicle scheduling, maintenance etc. The operation of public road transportation in Trivandrum City is analysed on the basis of this theoretical background. The studies made have relevance to any medium sized city in India or even abroad. If not properly managed, deterioration of any public utility system is a natural process and it adversely affects the consumers, the economy and the nation. Making any system more efficient requires careful analysis, judicious decision making and proper implementation. It is hoped that this study will throw some light into the various operational aspects of urban passenger road transport management which can be of some help to make it perform more efficiently
Resumo:
.
Resumo:
L'objectiu central de la tesi és estudiar els processos que permeten aconseguir un desenvolupament local a llarg termini de les ciutats mitjanes a partir de la implantació d'una gran infrastructura com el Tren d'Alta Velocitat (TAV). Es parteix de la hipòtesi que el desenvolupament local urbà a partir del TAV depèn de factors objectius i de factors subjectius (dels subjectes), uns factors que prenen una forma particular en el desenvolupament de les ciutats mitjanes. La tesi es divideix en una primera part teòrica i segona de més aplicada. Diversos autors han arribat a la conclusió que la relació tradicional que s'ha donat entre les infrastructures de transport i territori parteix d'uns paradigmes deterministes, que s'exemplifiquen amb una relació de "causa-efecte". Per aquest motiu, s'han criticat els estudis sobre els efectes socioeconòmics de les infrastructures de transport, així com el mateix concepte d'"efecte". Aquesta crítica es repeteix els estudis sobre el TAV i les ciutats mitjanes, que arriben a la conclusió que el desenvolupament econòmic no és un fet automàtic i que no es poden predir les conseqüències a mig i llarg termini del TAV. El desenvolupament local a partir del TAV, doncs, estaria relacionat amb tres elements principals. En primer lloc, entendre que la ciutat -i el territori- és un fenomen complex i, com a tal, cal abordar-lo des de la teoria dels sistemes complexos. En segon lloc, la gran infrastructura ha de convertir-se en un recurs endogen (interconnexió amb la xarxa local d'actors i territorialització en el milieu de la ciutat) per a que pugui contribuir al desenvolupament. En tercer lloc, la dinàmica de governance dels actors és primordial, i es divideix en la gestió interna de la xarxa local (projecte local) i la gestió multinivell de les administracions. En base als referents teòrics, es construeix una metodologia per avaluar el grau de desenvolupament local que ha comportat el TAV en tres ciutats mitjanes de l'arc mediterrani europeu, Lleida, Avinyó i Novara, situades respectivament a Espanya, França i Itàlia. La metodologia preveu l'estudi d'aspectes tècnics de la ciutat com els de transport (Posició territorial de la ciutat a partir del TAV, Característiques de l'estació TAV), urbanístics (Model urbanístic a escala municipal/urbana, Model urbanístic a escala de l'estació) i econòmics (Diferents projectes econòmics de la ciutat relacionats amb el TAV). També preveu l'estudi d'aspectes organitzatius externs (Els agents supralocals i els seus projectes, Grau de conflictivitat i cooperació en les relacions dels agents locals i supralocals) i interns (Capacitat de creació d'un projecte de ciutat a partir del TAV, Agents que participen en el projecte local i la seva dinàmica, Àmbit territorial dels projectes). Finalment s'efectua una avaluació del procés i dels resultats del desenvolupament local. Com a conclusió es demostra que el procés de desenvolupament local a partir de les grans infrastructures de transport depèn, en bon part, de la capacitat de governance. Depèn, per un cantó, de la capacitat dels agents locals d'elaborar un projecte de desenvolupament i liderar unes estratègies d'aprofitament i, de l'altre, de la capacitat dels agents del territori (estatals, regionals, locals) de crear aliances i cooperació per planificar la infrastructura de transport. Finalment es presenten un seguit de recomanacions a les ciutats que volen planificar l'arribada del TAV per a que contribueixi a un desenvolupament amb les característiques d'eficàcia, sostenibilitat, productivitat i equitat.
Resumo:
A wind-tunnel study was conducted to investigate ventilation of scalars from urban-like geometries at neighbourhood scale by exploring two different geometries a uniform height roughness and a non-uniform height roughness, both with an equal plan and frontal density of λ p = λ f = 25%. In both configurations a sub-unit of the idealized urban surface was coated with a thin layer of naphthalene to represent area sources. The naphthalene sublimation method was used to measure directly total area-averaged transport of scalars out of the complex geometries. At the same time, naphthalene vapour concentrations controlled by the turbulent fluxes were detected using a fast Flame Ionisation Detection (FID) technique. This paper describes the novel use of a naphthalene coated surface as an area source in dispersion studies. Particular emphasis was also given to testing whether the concentration measurements were independent of Reynolds number. For low wind speeds, transfer from the naphthalene surface is determined by a combination of forced and natural convection. Compared with a propane point source release, a 25% higher free stream velocity was needed for the naphthalene area source to yield Reynolds-number-independent concentration fields. Ventilation transfer coefficients w T /U derived from the naphthalene sublimation method showed that, whilst there was enhanced vertical momentum exchange due to obstacle height variability, advection was reduced and dispersion from the source area was not enhanced. Thus, the height variability of a canopy is an important parameter when generalising urban dispersion. Fine resolution concentration measurements in the canopy showed the effect of height variability on dispersion at street scale. Rapid vertical transport in the wake of individual high-rise obstacles was found to generate elevated point-like sources. A Gaussian plume model was used to analyse differences in the downstream plumes. Intensified lateral and vertical plume spread and plume dilution with height was found for the non-uniform height roughness
Resumo:
Amman the primate capital city of the Hashemite Kingdom of Jordan currently has a population in excess of 2 million, but in 1924 it consisted of little more than a collection of dwellings and some 2000-3000 inhabitants. The present paper sets out to document and explain the phenomenal expansion of "ever-growing Amman". The physical geography of the urban region and the early growth of the city are considered at the outset and this leads directly to consideration of the highly polarised social structuring that characterises contemporary Amman. In doing this, original data derived from the recent Greater Amman Municipality's Geographical Information System are presented. In this respect, the essential modernity of the city is exemplified. The employment and industrial bases of the city and a range of pressing contemporary issues are then considered, including transport and congestion, the provision of urban water under conditions of water stress and privatisation, and urban and regional development planning for the city. The paper concludes by emphasizing the growing regional and international geopolitical salience of the city of Amman at the start of the 21st century. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
Solar irradiance measurements from a new high density urban network in London are presented. Annual averages demonstrate that central London receives 30 ± 10 Wm-2 less solar irradiance than outer London at midday, equivalent to 9 ± 3% less than the London average. Particulate matter and AERONET measurements combined with radiative transfer modeling suggest that the direct aerosol radiative effect could explain 33 to 40% of the inner London deficit and a further 27 to 50% could be explained by increased cloud optical depth due to the aerosol indirect effect. These results have implications for solar power generation and urban energy balance models. A new technique using ‘Langley flux gradients’ to infer aerosol column concentrations over clear periods of three hours has been developed and applied to three case studies. Comparisons with particulate matter measurements across London have been performed and demonstrate that the solar irradiance measurement network is able to detect aerosol distribution across London and transport of a pollution plume out of London.
Resumo:
Anthropogenic emissions of heat and exhaust gases play an important role in the atmospheric boundary layer, altering air quality, greenhouse gas concentrations and the transport of heat and moisture at various scales. This is particularly evident in urban areas where emission sources are integrated in the highly heterogeneous urban canopy layer and directly linked to human activities which exhibit significant temporal variability. It is common practice to use eddy covariance observations to estimate turbulent surface fluxes of latent heat, sensible heat and carbon dioxide, which can be attributed to a local scale source area. This study provides a method to assess the influence of micro-scale anthropogenic emissions on heat, moisture and carbon dioxide exchange in a highly urbanized environment for two sites in central London, UK. A new algorithm for the Identification of Micro-scale Anthropogenic Sources (IMAS) is presented, with two aims. Firstly, IMAS filters out the influence of micro-scale emissions and allows for the analysis of the turbulent fluxes representative of the local scale source area. Secondly, it is used to give a first order estimate of anthropogenic heat flux and carbon dioxide flux representative of the building scale. The algorithm is evaluated using directional and temporal analysis. The algorithm is then used at a second site which was not incorporated in its development. The spatial and temporal local scale patterns, as well as micro-scale fluxes, appear physically reasonable and can be incorporated in the analysis of long-term eddy covariance measurements at the sites in central London. In addition to the new IMAS-technique, further steps in quality control and quality assurance used for the flux processing are presented. The methods and results have implications for urban flux measurements in dense urbanised settings with significant sources of heat and greenhouse gases.
Resumo:
In 2007, the world reached the unprecedented milestone of half of its people living in cities, and that proportion is projected to be 60% in 2030. The combined effect of global climate change and rapid urban growth, accompanied by economic and industrial development, will likely make city residents more vulnerable to a number of urban environmental problems, including extreme weather and climate conditions, sea-level rise, poor public health and air quality, atmospheric transport of accidental or intentional releases of toxic material, and limited water resources. One fundamental aspect of predicting the future risks and defining mitigation strategies is to understand the weather and regional climate affected by cities. For this reason, dozens of researchers from many disciplines and nations attended the Urban Weather and Climate Workshop.1 Twenty-five students from Chinese universities and institutes also took part. The presentations by the workshop's participants span a wide range of topics, from the interaction between the urban climate and energy consumption in climate-change environments to the impact of urban areas on storms and local circulations, and from the impact of urbanization on the hydrological cycle to air quality and weather prediction.
Resumo:
To bridge the gaps between traditional mesoscale modelling and microscale modelling, the National Center for Atmospheric Research, in collaboration with other agencies and research groups, has developed an integrated urban modelling system coupled to the weather research and forecasting (WRF) model as a community tool to address urban environmental issues. The core of this WRF/urban modelling system consists of the following: (1) three methods with different degrees of freedom to parameterize urban surface processes, ranging from a simple bulk parameterization to a sophisticated multi-layer urban canopy model with an indoor–outdoor exchange sub-model that directly interacts with the atmospheric boundary layer, (2) coupling to fine-scale computational fluid dynamic Reynolds-averaged Navier–Stokes and Large-Eddy simulation models for transport and dispersion (T&D) applications, (3) procedures to incorporate high-resolution urban land use, building morphology, and anthropogenic heating data using the National Urban Database and Access Portal Tool (NUDAPT), and (4) an urbanized high-resolution land data assimilation system. This paper provides an overview of this modelling system; addresses the daunting challenges of initializing the coupled WRF/urban model and of specifying the potentially vast number of parameters required to execute the WRF/urban model; explores the model sensitivity to these urban parameters; and evaluates the ability of WRF/urban to capture urban heat islands, complex boundary-layer structures aloft, and urban plume T&D for several major metropolitan regions. Recent applications of this modelling system illustrate its promising utility, as a regional climate-modelling tool, to investigate impacts of future urbanization on regional meteorological conditions and on air quality under future climate change scenarios. Copyright © 2010 Royal Meteorological Society
Resumo:
Good urban design has the power to aid in the provision of inclusive journey environments, yet traditionally neglects the perspective of the cyclist. This paper starts from the premise that more can be done to understand and articulate cyclists’ experiences and perceptions of the urban environment in which they cycle, as part of a closer linking of urban design qualities with transport planning and infrastructure interventions. This approach is particularly applicable in relation to older cyclists, a group whose needs are often poorly understood and for whom perceptions can significantly influence mobile behaviours. Currently, knowledge regarding the relationship between the built environment and physical activity, including cycling, in older adults is limited. As European countries face up to the challenges associated with ageing populations, some metropolitan regions, such as Munich, Germany, are making inroads into widening cycling’s appeal across generations through a combination of urban design, policy and infrastructure initiatives. The paper provides a systematic understanding of the urban design qualities and built environment features that affect cycling participation and have the potential to contribute towards healthy ageing. Urban design features such as legibility, aesthetics, scale and open space have been shown to influence and affect other mobile behaviours (e.g. walking), but their role as a mediator in cycle behaviour remains under-explored. Many of these design ‘qualities’ are related to individual perceptions; capturing these can help build a picture of quality in the built environment that includes an individual’s relationship with their local neighbourhood and its influences on their mobility choices. Issues of accessibility, facilities, and safety in cycling remain crucial, and, when allied to these design ‘qualities‘, provides a more rounded reflection of everyday journeys and trips taken or desired. The paper sets out the role that urban design might play in mediating these critical mobility issues, and in particular, in better understanding the ‘quality of the journey’. It concludes by highlighting the need for designers, policy makers, planners and academics to consider the role that design can play in encouraging cycle participation, especially as part of a healthy ageing agenda.