Experience overrides colour in lizard contests

We examined the role of conspicuous coloration in male-male contests for two species of Australian dragon lizards, Ctenophortis decresii and C. vadnappa, in which conspicuous coloration has a demonstrated predation cost. We conducted contests in which the overall conspicuousness of male coloration was manipulated using paints that matched the spectral reflectance of the lizards, as well as natural (control) contests. There was little evidence for an influence of colour on contest outcome or aggression levels for either species when all experiments were considered. However, we found a significant effect of trial order and experience on contest outcome and aggression levels (the same pair of males was used for both types of contest), despite a 2-3 week interval between contests. When we examined only the first trial between unfamiliar males, we found that male C. vadnappa that had been painted to appear more conspicuous consistently won. Comparison with the natural trials suggests that the aspect of colour manipulation that was responsible for this result was the 'hue' of the throat: males with yellower throats consistently beat males with bluer throats in both natural and painted trials. The difference in coloration of flank markings also predicted the difference in aggression scores between contestants in the natural trials. These results suggest that although colour is important in opponent assessment and in determining contest outcome in C vadnappa, previous agonistic experience can override the effects of colour and have a long-lasting influence on aggressive behaviour.

Realtime telemedicine for paediatric otolaryngology pre-admission screening

We conducted a feasibility study to examine whether a paediatric patient at a regional hospital could be assessed by an ear, nose and throat (ENT) specialist via videoconference, therefore saving at least one journey to the tertiary hospital for a pre-admission appointment. A video-otoscope was used with standard videoconference equipment, and realtime images were transmitted at a bandwidth of 384 kbit/s. In all, 13 telepaediatric ENT clinics were conducted between November 2003 and April 2005, and 98 consultations were facilitated for 64 patients. The main reasons for referral were recurrent tonsillitis (25%) and obstructive sleep apnoea (23%). Of the 64 patients examined by telemedicine, 42 (66%) were recommended for surgery and placed on the surgical waiting list. About 12 patients (19%) required travel to the tertiary centre for further investigations and tests not available locally, while four patients (6%) were reviewed via videoconference during a scheduled clinic. Six patients (9%) required no further follow-up after their initial telepaedliatric consultation. Videoconferencing is an effective method of assessing ENT conditions of paediatric patients and for pre-screening potential surgical admissions to a tertiary hospital. Careful consideration of a number of economic and logistical factors needs to be made before large investments are made to expand the service.

Parvovirus B19 infection presenting as 'bathing trunk' erythema with pustules

A 7-year-old girl presented with acute vulval erythema and pustules, associated with a petechial eruption in her flexures and over her feet. There was a mild prodromal illness and the patient was afebrile. There were minimal symptoms associated with the rash. Skin and throat swabs were negative and blood examination showed mild neutrophilia and lymphopaenia. Parvovirus B19 IgM was detected on serology and cutaneous features resolved within 4 days. This is a further case of parvovirus B19 infection presenting as a 'bathing trunk' exanthem that has unique dermatologic features, including the presence of pustules and distant petechiae. © 2006 The Australasian College of Dermatologists.

Predictors of an antibiotic prescription by GPs for respiratory tract infections: a pilot

Background. Antibiotics are over-prescribed for respiratory tract infections in Australia. Objectives. The aim of this study was to describe the clinical predictors of GPs' prescribing of antibiotics. Methods. We used Clinical Judgment Analysis to study the responses of GPs to hypothetical paper-based vignettes of a 20-year-old with a respiratory tract infection. The nature of four symptoms and signs (colour of nasal mucous discharge; soreness of the throat; presence of fever; and whether any cough was productive of sputum) was varied and their effect on prescribing measured using logistic regression. Results. Twenty GPs participated. The nature of each symptom and sign significantly predicted prescribing of an antibiotic. Cough productive of yellow sputum; presence of sore throat; fever; and coloured nasal mucus increased the probability of an antibiotic being prescribed. Conclusions. GPs are influenced by clinical signs and symptoms to use antibiotics for respiratory infections for which there is poor evidence of efficacy from the literature.

Pearl-chain waveguides written at megahertz repetition rate

Waveguides in the form of connected pearls, written with sub-30 fs pulses centered at 800 nm at a repetition rate of 10 MHz, show high changes of the refractive index and, as a consequence, simple in-coupling. The value of the refractive index modification of these waveguides is as high as 10-2, optical losses are 6 dB/cm (at 1.55 µm) and the mode field diameter is 8 µm at 670 nm.

Downdraft gasification of biomass

The objectives of this research were to investigate the parameters affecting the gasification process within downdraft gasifiers using biomass feedstocks. In addition to investigations with an open-core gasifier, a novel open-topped throated gasifier was designed and used. A sampling system was designed and installed to determine the water, tar and particular content of the raw product gas. This permitted evaluation of the effects of process parameters and reactor design on tar and particular production, although a large variation was found for the particulate measurements due to the capture of large particles. For both gasifiers, the gasification process was studied in order to identify and compare the mechanisms controlling the position and shape of the reaction zones. The stability of the reaction zone was found to be governed by the superficial gas velocity within the reactor. A superficial gas velocity below 0.2 Nms-1 resulted in a rising reaction zone in both gasifiers. Turndown is achieved when the rate of char production by flaming pyrolysis equals the rate of char gasification over a range of throughputs. A turndown ratio of 2:1 was achieved for the hybrid-throated gasifier, compared to 1.3:1 for the open-core. It is hypothesized that pyrolysis is a surface area phenomenon, and that in the hybrid gasifier the pyrolysis front can expand to form a dome-shape. The rate of char gasification is believed to increase as the depth of the gasification zone increases. Vibration of the open-core reactor bed decreased the bed pressure drop, reduced the voidage, aided solids flow and gave a minor improvement in the product gas energy content. Insulation improved the performance of both reactors by reducing heat losses resulting in a reduced air to feed ratio requirement. The hybrid gasifier gave a higher energy conversion efficiency, a higher product gas heating value, and a lower tar content than the open-core gasifier due to efficient gas mixing in a high temperature tar cracking region below the throat and reduced heat losses.

Gasification of rubberwood in a downdraft gasifier

The objectives of this research were to investigate the perforamnce of a rubberwood gasifier and engine with electricity generation and to identify opportunities for the implementation of such a system in Malaysia. The experimental work included the design, fabrication and commissioning of a throated downdraft gasifier in Malaysia. The gasifier was subsequently used to investigate the effect of moisture content, dry wood capacity and particle size of rubberwood on gasifier performance. Additional experiments were also conducted to investigate the influence of two different nozzle numbers and two different throat diameters on tar cracking. A total of 101 runs were completed during the duration of the research. From the experimental data, the average mass balance was found to be 92.65%. The average energy balance over the gasifier to hot raw gas was 98.7%, to cold clean gas was 102.4% and over the complete system was 101.9%. The heat loss from the gasifier was estimated to range from 10-26% of the chemical energy of the feedstock. From the downstream operation, the heat loss was estimated to range from 17-37% of the chemical energy of rubberwood feedstock. The maximum throughput for stable operation was found to be 60-70% of the maximum dry wood capacity. The gasifier was found to have a maximum turndown ratio of 5:1. It is also postulated that the phenomenon of turndown of the gasifier is due to a `bubble theory' occurring at the gasification zone, and this hypothesis is explained. For stable power output, the working range of the engine was found to be 5-33.5 kWe. The thermal efficiency and diesel displacement of the engine was found to be 17-18% and 65-70% respectively. The research also showed that rubberwood gasification in Malaysia is feasible if the price of diesel is above MR35/l and the price of wood is below MR120/tonne.

A failure criterion for fillet welds

The work constitutes a study of the strength of mild steel fillet welds subject to static loading, and the behaviour of flange welded beam-column connections under combined bending and shear. Tests are conducted on short welds in the as-welded and stress relieved conditions, and also on full-size beam-column connections. It is shown that welds under compression have a lower strength than when under tension. Failure of the fillet weld is initiated at the weld root, the important factor controlling the initiation being weld ductility. The greater the residual stress, the lower the weld ductility and ultimate strength. Thermal stress relieving increases strength by as much as 30%. Weld failure plane is rarely at the throat and varies from 0° to 45° depending upon loading condition. Failure plane average stresses are related by a circular function which is expressed in terms of externally applied forces at limit state. The tension weld of a flange-welded beam-column connection always fails before the compression weld. The shear load sharing between the welds is a complex function of elastic compression of the web, elastic/plastic deformation of the flanges, load/deformation characteristics, and the type of load application. Bearing forces between the compression flange and column face produce low level bearing stresses and frictional forces which make a negligible contribution to shear load resistance. Three modes of connection failure are possible; 'end mode', 'bending mode' and 'shear mode', with a sudden change taking place between the two latter.

Deflection of jets discharged into a reservoir with a free surface

Deflections of jets discharged into a reservoir with a free surface are investigated numerically. The jets are known to deflect towards either side of the free surface or the bottom, whose direction is not determined uniquely in some experimental conditions, i.e. there are multiple stable states realizable in the same condition. The origin of the multiple stable states is explored by utilizing homotopy transformations in which the top boundary of the reservoir is transformed from a rigid to a free boundary and also the location of the outlet throat is continuously moved from mid-height to the top. We depicted bifurcation diagrams of the flow compiling the data of numerical simulations, from which we identified the origin as an imperfect pitchfork bifurcation, and obtained an insight into the mechanism for the direction to be determined. The parameter region where such multiple stable states are possible is also delimited. © 2011 The Japan Society of Fluid Mechanics and IOP Publishing Ltd.

The effect of flying and low humidity on the admittance of the tympanic membrane and middle ear system

Many passengers experience discomfort during flight because of the effect of low humidity on the skin, eyes, throat, and nose. In this physiological study, we have investigated whether flight and low humidity also affect the tympanic membrane. From previous studies, a decrease in admittance of the tympanic membrane through drying might be expected to affect the buffering capacity of the middle ear and to disrupt automatic pressure regulation. This investigation involved an observational study onboard an aircraft combined with experiments in an environmental chamber, where the humidity could be controlled but could not be made to be as low as during flight. For the flight study, there was a linear relationship between the peak compensated static admittance of the tympanic membrane and relative humidity with a constant of proportionality of 0.00315 mmho/% relative humidity. The low humidity at cruise altitude (minimum 22.7 %) was associated with a mean decrease in admittance of about 20 % compared with measures in the airport. From the chamber study, we further found that a mean decrease in relative humidity of 23.4 % led to a significant decrease in mean admittance by 0.11 mmho [F(1,8) = 18.95, P = 0.002], a decrease of 9.4 %. The order of magnitude for the effect of humidity was similar for the flight and environmental chamber studies. We conclude that admittance changes during flight were likely to have been caused by the low humidity in the aircraft cabin and that these changes may affect the automatic pressure regulation of the middle ear during descent. © 2013 Association for Research in Otolaryngology.

Ionized cluster beam deposition, and thin film analysis

In 1972 the ionized cluster beam (ICB) deposition technique was introduced as a new method for thin film deposition. At that time the use of clusters was postulated to be able to enhance film nucleation and adatom surface mobility, resulting in high quality films. Although a few researchers reported singly ionized clusters containing 10$\sp2$-10$\sp3$ atoms, others were unable to repeat their work. The consensus now is that film effects in the early investigations were due to self-ion bombardment rather than clusters. Subsequently in recent work (early 1992) synthesis of large clusters of zinc without the use of a carrier gas was demonstrated by Gspann and repeated in our laboratory. Clusters resulted from very significant changes in two source parameters. Crucible pressure was increased from the earlier 2 Torr to several thousand Torr and a converging-diverging nozzle 18 mm long and 0.4 mm in diameter at the throat was used in place of the 1 mm x 1 mm nozzle used in the early work. While this is practical for zinc and other high vapor pressure materials it remains impractical for many materials of industrial interest such as gold, silver, and aluminum. The work presented here describes results using gold and silver at pressures of around 1 and 50 Torr in order to study the effect of the pressure and nozzle shape. Significant numbers of large clusters were not detected. Deposited films were studied by atomic force microscopy (AFM) for roughness analysis, and X-ray diffraction.^ Nanometer size islands of zinc deposited on flat silicon substrates by ICB were also studied by atomic force microscopy and the number of atoms/cm$\sp2$ was calculated and compared to data from Rutherford backscattering spectrometry (RBS). To improve the agreement between data from AFM and RBS, convolution and deconvolution algorithms were implemented to study and simulate the interaction between tip and sample in atomic force microscopy. The deconvolution algorithm takes into account the physical volume occupied by the tip resulting in an image that is a more accurate representation of the surface.^ One method increasingly used to study the deposited films both during the growth process and following, is ellipsometry. Ellipsometry is a surface analytical technique used to determine the optical properties and thickness of thin films. In situ measurements can be made through the windows of a deposition chamber. A method for determining the optical properties of a film, that is sensitive only to the growing film and accommodates underlying interfacial layers, multiple unknown underlayers, and other unknown substrates was developed. This method is carried out by making an initial ellipsometry measurement well past the real interface and by defining a virtual interface in the vicinity of this measurement. ^

Fluid dynamics and platelet deposition in a model arterial stenosis

The objective of this study was to gain further understanding and elucidation of the fluid dynamic factors and flow-induced mechanisms of the thrombogenic process of platelet deposition onto, and possible subsequent embolization from, the walls of an arterial stenosis. This has been accomplished by measurement of the axial dependence of platelet deposition within a modeled arterial stenosis for a transitional flow and a completely laminar flow field. The stenotic region of the model was collagen-coated to simulate a damaged endothelial lining of an artery. Fluid dynamics within a stenosis was studied using qualitative flow visualization, and was further compared to the in vitro platelet deposition studies. Normalized platelet density (NPD) measurements indicate decreased levels of NPD in the high shear throat region of the stenosis for a Reynolds number of 300 and a drastic increase in NPD at the throat for a Reynolds number of 175. This study provides further understanding of the flow dynamic effects on thrombus development within a stenosis. ^

Obesity and Air Travel: Weighing Up the Issues

It may soon be the norm for many airline passengers arriving at the check-in desk of any international airline with both stow- away and carry-on luggage to be asked to step onto the weighing scale as the airlines attempt to compete and remain operationally viable in what has become for most a cut-throat and highly litigious operating environment. The author's commentary seeks to highlight a number of the issues surrounding the current impasse. It is also intended to catalyze a more healthy and informed debate aimed at finding an acceptable resolution to this crisis prior to one being imposed which fails to satisfy the needs of either camp.

Ecologia de comunidades e comportamento reprodutivo de anfíbios anuros em savana amazônica

The Amazon savannas occur as isolated patches throughout extensive areas of forest in the states of Amapá, Amazonas, Pará, and Roraima. There is a considerable variation in the composition of anuran assemblages in the localities and phytophysiognomies of Amazon savannas and given the absence of studies on reproductive behavior, a systematic and geographically wide sampling has been carried out in the Amapá savanna, located in the Eastern Amazon. The study was conducted in a savanna area in the state of Amapá to examine the composition, ecology, and reproductive behavior of anuran amphibians. We carried out 24 field trips in each phytophysiognomy (gramineous-woody savana, gramineous-herbaceous-woody savana, park savana, and arboreal savanna); for analysis of reproductive behavior observations were made during the period January to December 2013, lasting four consecutive days. Samples were collected by active and acoustic search along 20 plots of 100x50 meters. Twenty-one anuran species were recorded, of which four are new records for the state of Amapá: Dendropsophus walfordi, Scinax fuscomarginatus, Pseudopaludicola boliviana e Elachistocleis helianneae. The KruskalWallis ANOVA revealed significant differences between richness and species diversity in the phytophysiognomies (p < 0.05). The Bray-Curtis similarity coefficient divided the phytophysiognomies into three groups: arboreal savana, gramineous-woody savanna and gramineous-herbaceous-woody savanna, and park savanna. According to the non-metric multidimensional scaling, the structure of the anuran community resulted in a separation into three phytophysiognomies, with significant differences in the structure of communities (ANOSIM, R = 0.823; p < 0.001). In the study of community ecology, the results obtained for spatial, temporal, and trophic niche breadth suggest that the assemblage of anurans of the Amapá savanna is not composed of predominantly generalist species. Also, the presence of other specialist anurans may explain the processes of speciation associated with the isolation of habitats, resulting in heterogeneity and spatial discontinuity in the phytophysiognomies with open formations. The null model analysis revealed that the community is structured based on temporal and trophic niche, indicating a significant influence of contemporary ecological factors on the assemblage. The absence of structure based on spatial niche might be explained by the spatial segregation in the distribution and occupation of anurans in the different phytophysiognomies of the Amapá savanna. Regarding the reproductive behavior of anurans, 11 species were classified as having a long breeding season, intrinsically associated with the rainy season and the reproductive mode of most species that lay egg clutches in lentic water bodies. Six reproductive modes were recorded and parental care was observed in Leptodactylus macrosternum and L. podicipinus, whose reproductive mode is characterized by foam nests. Regarding behavioral reproductive strategies, calling males were observed in all species of anurans, satellite males were recorded only for D. walfordi, Hypsiboas multifasciatus, S. nebulosus and S. fuscomarginatus; active search for females was observed for Phyllomedusa hypochondrialis and L. fuscus, and male displacement was recorded only for Rhinella major and R. margaritifera. Of the reproductive behaviors observed, throat and vocal sac display is associated with courtship and territorial behavior exhibited by males. In addition to courtship behavior, visual signals associated with courtship strategies were recorded for the anurans of the Amapá savanna.

Materiais bionanocompósitos a base de argilominerais e hidróxidos duplos lamelares como sistemas de liberação de fármacos

Bionanocomposites systems clay base (montmorillonite and sepiolite), layered double hidroxides and biopolymers (carboxymethylcellulose and zein) were evaluated as topical delivery systems with antibacterial activity and as oral delivery systems. For this study, neomycin, a topical antibiotic, indicated mainly for open wound infections. The drug amoxicillin, an antibiotic indicated mainly for throat infections, were also used in this study. Both antibiotics were used as model drugs. Initially, drugs were incorporated directly into the biopolymer matrix, comprising the combination of carboxymethylcellulos and zein, being conformed as movies and balls and evaluated for their antibacterial activity and controlled release simulating gastrointestinal fluids. Moreover, hybrids materials have been prepared where the neomycin drug was incorporated into the lamellar inorganic solids, such as montmorillonite by ion exchange reaction, and the fibrous type, such as sepiolite by adsorption in aqueous solution. But the drug amoxicillin was incorporated into layered double hydroxides by anion exchange and montmorillonite by cation exchange. The resulting hybrids were in turn combined with the biopolymer matrix yielding bionanocomposites shaped materials such as films were tested for their antibacterial activity, and the shaped materials beads were tested for their release in the gastrointestinal fluids. Through the analysis of various physico-chemical techniques, we observed the interactions between the studied materials, the formation of hybrids materials, obtaining the bionanocomposites materials and material efficiency when applied in controlled release of drugs both topical and use oral mainly influenced by the presence of zein, are promising as topical delivery systems and oral drugs.