Probing the (6,7)Li nucleon densities through a new break-up process approach

In this work we present a double folding optical model analysis of new near-barrier quasi-elastic experimental data for the (6,7)Li + (120)Sn systems. From the analysis, it was possible to confirm the ground-state nucleon densities assumed for the weakly bound (6,7)Li isotopes. The apparent discrepancies between the experimental densities and those based on Dirac-Hartree-Fock Bogoliubov (DHB) calculations were removed. A new approach that simulates the projectile break-up and a positive polarization from couplings of (6,7)Li bound states with the continuum was considered in the reaction mechanism. (C) 2010 Elsevier B.V. All rights reserved.

Effect of power densities and irradiation times on the degree of conversion and temperature increase of a microhybrid dental composite resin

The different parameters used for the photoactivation process provide changes in the degree of conversion (DC%) and temperature rise (TR) of the composite resins. Thus, the purpose of this study was to evaluate the DC (%) and TR of the microhybrid composite resin photoactivated by a new generation LED. For the KBr pellet technique, the composite resin was placed into a metallic mould (1-mm thickness and 4-mm diameter) and photoactivated as follows: continuous LED LCU with different power density values (50-1000 mW/cm(2)). The measurements for the DC (%) were made in a FTIR Spectrometer Bomen (model MB-102, Quebec-Canada). The spectroscopy (FTIR) spectra for both uncured and cured samples were analyzed using an accessory for the diffuse reflectance. The measurements were recorded in the absorbance operating under the following conditions: 32 scans, 4-cm(-1) resolution, and a 300 to 4000-cm(-1) wavelength. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of the absorbance intensities of aliphatic C=C (peak at 1638 cm(-1)) against an internal standard before and after the curing of the specimen: aromatic C-C (peak at 1608 cm-1). For the TR, the samples were made in a metallic mould (2-mm thickness and 4-mm diameter) and photoactivated during 5, 10, and 20 s. The thermocouple was attached to the multimeter to allow the temperature readings. The DC (%) and TR were calculated by the standard technique and submitted to ANOVA and Tukey`s test (p < 0.05). The degree of conversion values varied from 35.0 (+/- 1.3) to 45.0 (+/- 2.4) for 5 s, 45.0 (+/- 1.3) to 55.0 (+/- 2.4) for 10 s, and 47.0 (+/- 1.3) to 52.0 (+/- 2.4) for 20 s. For the TR, the values ranged from 0.3 (+/- 0.01) to 5.4 (+/- 0.11)degrees C for 5 s, from 0.5 (+/- 0.02) to 9.3 (+/- 0.28)degrees C for 10 s, and from 1.0 (+/- 0.06) to 15.0 (+/- 0.95)degrees C for 20 s. The power densities and irradiation times showed a significant effect on the degree of conversion and temperature rise.

Synthesis, Characterization, and Electrocatalytic Activity toward Methanol Oxidation of Carbon-Supported Pt(x)-(RuO(2)-M)(1-x) Composite Ternary Catalysts (M = CeO(2), MoO(3), or PbO(x))

Carbon-supported platinum is commonly used as an anode electrocatalyst in low-temperature fuel cells fueled with methanol. The cost of Pt and the limited world supply are significant barriers for the widespread use of this type of fuel cell. Moreover, Pt used as anode material is readily poisoned by carbon monoxide produced as a byproduct of the alcohol oxidation. Although improvements in the catalytic performance for methanol oxidation were attained using Pt-Ru alloys, the state-of-the-art Pt-Ru catalyst needs further improvement because of relatively low catalytic activity and the high cost of noble Pt and Ru. For these reasons, the development of highly efficient ternary platinum-based catalysts is an important challenge. Thus, various compositions of ternary Pt(x)-(RuO(2)-M)(1-x)/C composites (M = CeO(2), MoO(3), or PbO(x)) were developed and further investigated as catalysts for the methanol electro-oxidation reaction. The characterization carried out by X-ray diffraction, energy-dispersive X-ray analysis, transmission electron microscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry point out that the different metallic oxides were successfully deposited on the Pt/C, producing small and well-controlled nanoparticles in the range of 2.8-4.2 nm. Electrochemical experiments demonstrated that the Pt(0.50)(RuO(2)-CeO(2))(0.50)/C composite displays the higher catalytic activity toward the methanol oxidation reaction (lowest onset potential of 207 mV and current densities taken at 450 mV, which are 140 times higher than those at commercial Pt/C), followed by the Pt(0.75)(RuO(2)-MoO(3))(0.25)/C composite. In addition, both of these composites produced low quantities of formic acid and formaldehyde when compared to a commercially available Pt(0.75)-Ru(0.25)/C composite (from E-Tek, Inc.), suggesting that the oxidation of methanol occurs mainly by a pathway that produces CO(2) forming the intermediary CO(ads).

How do different densities in a network affect the optimal location of service centers?

The p-median problem is often used to locate p service centers by minimizing their distances to a geographically distributed demand (n). The optimal locations are sensitive to geographical context such as road network and demand points especially when they are asymmetrically distributed in the plane. Most studies focus on evaluating performances of the p-median model when p and n vary. To our knowledge this is not a very well-studied problem when the road network is alternated especially when it is applied in a real world context. The aim in this study is to analyze how the optimal location solutions vary, using the p-median model, when the density in the road network is alternated. The investigation is conducted by the means of a case study in a region in Sweden with an asymmetrically distributed population (15,000 weighted demand points), Dalecarlia. To locate 5 to 50 service centers we use the national transport administrations official road network (NVDB). The road network consists of 1.5 million nodes. To find the optimal location we start with 500 candidate nodes in the network and increase the number of candidate nodes in steps up to 67,000. To find the optimal solution we use a simulated annealing algorithm with adaptive tuning of the temperature. The results show that there is a limited improvement in the optimal solutions when nodes in the road network increase and p is low. When p is high the improvements are larger. The results also show that choice of the best network depends on p. The larger p the larger density of the network is needed.��

Competition of sicklepod, cassia obtusifolia l., densities on soybean, glycine max (l.) merr., at variable row distance

Competition studies with soybeans, Glycine max (L.) Merr. "Bragg." and sicklepod, Cassia obtusifolia L., were conducted at the Agricultural Research and Education Center of the University of Florida in Quincy, Florida. Two field experiments were established, one on May 22, 1975. and the other four weeks later, on June 19, 1975, to determine the competitive effects of various sicklepod densities and the influences of soybean row distances on weed dry matter, soybear plant characteristics, yield components and seed yield, and on soil nutrient content. Control, low, medium, and high sicklepod densities in the first experiment were O, 25,000, 53,000, and 77,000 p1ants/ha, respectively; while the second experiment presented control, low, medium, and high sicklepod densities of O, 36,000, 68,000, and 122,000 plants/ha, respectively. Three soybean row distance treatments were tested using a constant pattern of 90-, 60-, and 45-cm widths throughout the growing season. Three other treatments, evaluated in a variable patern, were initially seeded in 30-cm row widths. Five weeks after planting, an appropriate number of soybean rows were harvested from the 30"cm pattern to establish row distances of 90, 60, and 30-60 cm for the remainder of the season. ln the greenhouse a test was conducted to evaluate the effects af those variables on seed germination and seedling vigor for the next soybean generation. As a result of full-season sicklepod competition, soybean plants were less branched, set fewer leaves, and presented thinner stems as compared to the control. However, height of soybean plants was not affected by the presence of sicklepod. ln one of the two experiments, number of nodes decreased for soybeans under weed campetition. The yield components--number of pods; number of seeds, and seed yield per soybean plant--were all similarly reduced due to weed competition. Seeds per pod were decreased to a lesser extent. Soybean seed yields per unit area were significantly diminished by increasing levels af sicklepod ��nfestation. While the control produced 3120 kg/ha, the sicklepod densities of 25,000, 53,000, and 77,000 plants/ha reduced seed y��elds 47, 65, and 73%, respectively. As soybean row distances decreased, number of branches, number of leaves, and stem diameter of soybeans decreased. However, the height of soybean plants increased with narrwing of row width. The components of seed yield--number of pods, number of seeds, and seed yield per soybean plant--diminished as row spacing was reduced. Maximum difference between row distances for these attributes was attained for soybean plants under weed-free conditions. Generally, as row width decreased, soybean seed yield per unit area increased. Specifically, soybear.s in 90-cm rows, either in constant or variable row pattern, yielded less than soybeans in 60- and 30-60-cm rows in the variable pattern. Soil contents of phosphorus, potassium, calcium, and magnesium were not affected by the various levels of sicklepod and soybean populalions. Neither the sicklepod densities nor the soybean row distances influenced seed germination and seedling vigor in the next soybean generation. Sicklepod was a strong competitor with soybeans at all density ranges investigated. Because sicklepod grows taller than soybeans during the reproductive stages of the crop, limited success can be reached by varying row spacing alone. However, this practice is considered an integral measure to complement other methods of sicklepod control. Compared to constant rows, the soybean cropping system using variable row spacings presents the choice of planting soybeans at close row spacings to provide early competition with weeds and the possibility of obtaining a forage crop after the first month of growth, without any decreases on the final seed yields.

Development, technological change and innovation, Schumpeter and neo-Schumpeterians

This review essay is devoted to a discussion of some central aspects of the Schumpeterian and neo-Schumpeterian approaches to the dynamic processes of development, technological change and innovation. This essay is organised in two parts. In the first, Schumpeter's insightful distinction between circular flow and development is discussed. In the second, some central elements of the neo-Schumpeterian interpretation and extension of Schumpeter's views are critically outlined, special emphasis being placed on some recent attempts to formalize several of his insights on the cyclical dynamics of the processes of technological change and innovation. I should stress that due to space constraints I will focus primarily upon macrotheoretic issues, thus paying only secondary attention to the neo-Schumpeterian literature on the microeconomics of technological change and to the burgeoning empirical developments along those lines.

Endogenous growth with deferred technological change

Lucas (2009) prop��s um modelo com dois setores para explicar padr��es observados em dados de crescimento. Entretanto, a an��lise de Lucas n��o envolve uma decis��o intertemporal para o consumidor. O comportamento das vari��veis �� determinado �� priori pela tecnologia escolhida. Rodriguez (2006) prop��s um modelo com a tecnologia com dois setores apresentada por Lucas adicionando um processo de decis��o intertemporal para o consumidor. Adicionalmente aos resultados obtidos por Rodriguez, n��s caracterizamos sufici��ncia e apresentamos exemplos esclarecedores de casos particulares do modelo. Ademais, n��s fazemos um esfor��o para derivar novos insights e esclarecer alguns pontos t��cnicos. Finalmente, n��s obtemos condi����es sob as quais a economia investe em capital humano mesmo com benef��cios diferidos.

Growth, structural change and technological capabilities Latin America in a comparative perspective

Countries differ in terms of technological capabilities and complexity of production structures. According to that, countries may follow different development strategies: one based on extracting rents from abundant endowments, such as labor or natural resources, and the other focused on creating rents through intangibles, basically innovation and knowledge accumulation. The present article studies international convergence and divergence, linking structural change with trade and growth through a North South Ricardian model. The analysis focuses on the asymmetries between Latin America and mature and catching up economies. Empirical evidence supports that a shift in the composition of the production structure in favor of R&D intensive sectors allows achieving higher rates of growth in the long term and increases the capacity to respond to demand changes. A virtuous export-led growth requires laggard countries to reduce the technological gap with respect to more advanced ones. Hence, abundance of factor endowments requires to be matched with technological capabilities development for countries to converge in the long term.

Optimal auction with a general distribution: virtual valuation without densities

We characterize the optimal auction in an independent private values framework for a completely general distribution of valuations. We do this introducing a new concept: the generalized virtual valuation. To show the wider applicability of this concept we present two examples showing how to extend the classical models of Mussa and Rosen and Baron and Myerson for arbitrary distributions

Estimating Relative Risk Aversion, Risk-Neutral and Real-World Densities using Brazilian Real Currency Options

Building Risk-Neutral Densities (RND) from options data can provide market-implied expectations about the future behavior of a financial variable. And market expectations on financial variables may influence macroeconomic policy decisions. It can be useful also for corporate and financial institutions decision making. This paper uses the Liu et all (2007) approach to estimate the option-implied Risk-neutral densities from the Brazilian Real/US Dollar exchange rate distribution. We then compare the RND with actual exchange rates, on a monthly basis, in order to estimate the relative risk-aversion of investors and also obtain a Real-world density for the exchange rate. We are the first to calculate relative risk-aversion and the option-implied Real World Density for an emerging market currency. Our empirical application uses a sample of Brazilian Real/US Dollar options traded at BM&F-Bovespa from 1999 to 2011. The RND is estimated using a Mixture of Two Log-Normals distribution and then the real-world density is obtained by means of the Liu et al. (2007) parametric risktransformations. The relative risk aversion is calculated for the full sample. Our estimated value of the relative risk aversion parameter is around 2.7, which is in line with other articles that have estimated this parameter for the Brazilian Economy, such as Ara��jo (2005) and Issler and Piqueira (2000). Our out-of-sample evaluation results showed that the RND has some ability to forecast the Brazilian Real exchange rate. Abe et all (2007) found also mixed results in the out-of-sample analysis of the RND forecast ability for exchange rate options. However, when we incorporate the risk aversion into RND in order to obtain a Real-world density, the out-of-sample performance improves substantially, with satisfactory results in both Kolmogorov and Berkowitz tests. Therefore, we would suggest not using the ���pure��� RND, but rather taking into account risk aversion in order to forecast the Brazilian Real exchange rate.

Implications of ernbodied technological change for development economics

Employing a embodied technologic change model in which the time decision of scrapping old vintages of capital and adopt newer one is endogenous we show that the elasticity of substitutions among capital and labor plays a key role in determining the optimum life span of capital. In particular, for the CD case the life span of capital does not depend on the relative price of it. The estimation of the model's long-run investment function shows, for a Panel data set consisting of 125 economies for 25 years, that the price elasticity of investment is lower than one; we rejected the CD specification. Our calibration for the US suggests 0.4 for the technical elasticity of substitution. In order to get a theoretical consistent concept of aggregate capital we derive the relative price profile for a shadow second-hand market for capital. The shape of the model's theoretical price curve reproduces the emp��rical estimation of it. \lVe plug the calibrate version of the long-run solution of the model to a cross-section of economies data set to get the implied TFP, that is, the part of the productivity which is not explained by the model. We show that the mo dei represent a good improvement, comparing to the standard neoc!assical growth model with CD production function and disembodied technical change, in accounting the world diversity in productivity. In addition the model describes the fact that a very poor economy can experience fast growth based on capital accumulation until the point of becoming a middle income economy; from this point on it has to rely on TFP increase in order to keep growing.

Investment-specific technological change and the Brazilian macroeconomy

We studied the effects of changes in banking spreads on distributions of income, wealth and consumption as well as the welfare of the economy. This analysis was based on a model of heterogeneous agents with incomplete markets and occupational choice, in which the informality of firms and workers is a relevant transmission channel. The main finding is that reductions in spreads for firms increase the proportion of entrepreneurs and formal workers in the economy, thereby decreasing the size of the informal sector. The effects on inequality, however, are ambiguous and depend on wage dynamics and government transfers. Reductions in spreads for individuals lead to a reduction in inequality indicators at the expense of consumption and aggregate welfare. By calibrating the model to Brazil for the 2003-2012 period, it is possible to find results in line with the recent drop in informality and the wage gap between formal and informal workers.

A technological innovation for capsicums production in Peru: the mechatronics arms

Peru agricultural exports have increased in recent years due to (i) free trade agreements with many countries (United States, Canada, European Union, China, Thailand, Singapore, Japan, Chile, among others), (ii) an increasing international demand for healthy products, (iii) country��s economic development and (iv) more private investments in this sector (Velazco 2012). Also, if we can compare among Peru three main regions (Coast, Andean highlands and the Jungle), It is the Coast (western region) that has a developed agricultural production due to unique weather conditions, private investments, public infrastructure, transport costs and quality of land (Gomez, 2008). This country development is also related to the production of non-traditional products for export like asparagus, artichokes, capsicums, bananas, grapes, among others; produced by agro industrial companies and small farmers and that are mainly labor intensive (Gomez, 2008 and Velazco, 2012). This very successful export diversification and self-discovery process was the result of a combination of strong natural comparative advantages (mainly excellent agro climatic conditions) and a significant innovation effort. It meant the introduction and expansion of new products and markets, the entry of new firms, and experimental research and the adoption of new techniques and process technologies developed abroad (in irrigation, crop management, post-harvesting, sanitary control, storage and packing) to produce high-quality, niche (gourmet) and higher value-added products, in line with consumer trends in sophisticated food markets. In products such as asparagus, mango, organic coffee and capsicums, Peru has become a leading world exporter (OECD). For this reason one of the government main tasks for the next years is to meet urgent agriculture producer���s needs in the areas of technological Innovation and business management (MINAG). In this context, this thesis analyzes the applicability of a new technology ��� the mechatronic arms ��� specifically to capsicums production sector in Peru. We chose Capsicums production sector (paprika, chilli pepper) because is mainly labor intensive and is the sector where my family company (DIROSE SAC) operates. This innovation consists in a 40 arms mechatronic combine, and it was first created in order to improve the efficiency on the labor intensive phase of harvest for this kind of agriculture products. It is estimated that a laborer with brief training operating the machine would be equivalent to 40 people that not only would work during daytime, but also on the night shift as well. Also, using this new technology can allow a company to make additional crops that would increase their yields and annual revenues. This thesis was developed as a business plan to make this new product available for other agriculture companies that operates in the capsicums production sector in Peru; however, this new technology has the potential to be modified in order to be available to other kind of agriculture products, in Peru and other countries.