VSImG: A high frame rate bitmap based display system for neuroscience research

This paper describes a visual stimulus generator (VSImG) capable of displaying a gray-scale, 256 x 256 x 8 bitmap image with a frame rate of 500 Hz using a boustrophedonic scanning technique. It is designed for experiments with motion-sensitive neurons of the fly`s visual system, where the flicker fusion frequency of the photoreceptors can reach up to 500 Hz. Devices with such a high frame rate are not commercially available, but are required, if sensory systems with high flicker fusion frequency are to be studied. The implemented hardware approach gives us complete real-time control of the displacement sequence and provides all the signals needed to drive an electrostatic deflection display. With the use of analog signals, very small high-resolution displacements, not limited by the image`s pixel size can be obtained. Very slow image displacements with visually imperceptible steps can also be generated. This can be of interest for other vision research experiments. Two different stimulus files can be used simultaneously, allowing the system to generate X-Y displacements on one display or independent movements on two displays as long as they share the same bitmap image. (C) 2011 Elsevier B.V. All rights reserved.

Framtagande av kravspecifikation beträffande en integrationav två informations-system vid Banverket Telenät

Detta PM är resultatet av ett arbete som är utfört vid Banverket Telenät i Borlänge. Målet var att leverera en kravspecifikation över en integration mellan systemen Ärling och DNA. Syftet med examensarbetet var att belysa de bakomliggande orsakerna som skapar behovet av en integration.Banverket Telenät har idag kund och beställareinformation i flera databaser. Uppdatering och underhåll av dessa databaser är ett problem för verksamheten. För att upprätthålla konsistent information så önskas en integration av kund- beställareinformationen.Vi fick som uppdrag att framställa en kravspecifikation över hur en integration av kund och beställareinformation kunde möjliggöras. Arbetet resulterade i en kravspecifikation som levererades till Banverket Telenät.

Integration av webbaserat analysprogram och kartprogram : Integration of web based analysis-software andmap-software

I takt med att GIS (Grafiska InformationsSystem) blir allt vanligare och mer användarvänligt har WM-data sett att kunder skulle ha intresse i att kunna koppla information från sin verksamhet till en kartbild. Detta för att lättare kunna ta till sig informationen om hur den geografiskt finns utspridd över ett område för att t.ex. ordna effektivare tranporter. WM-data, som det här arbetet är utfört åt, avser att ta fram en prototyp som sedan kan visas upp för att påvisa för kunder och andra intressenter att detta är möjligt att genomföra genom att skapa en integration mellan redan befintliga system. I det här arbetet har prototypen tagits fram med skogsindustrin och dess lager som inriktning. Befintliga program som integrationen ska skapas mellan är båda webbaserade och körs i en webbläsare. Analysprogrammet som ska användas heter Insikt och är utvecklat av företaget Trimma, kartprogrammet heter GIMS som är WM-datas egna program. Det ska vara möjligt att i Insikt analysera data och skapa en rapport. Den ska sedan skickas till GIMS där informationen skrivs ut på kartan på den plats som respektive information hör till. Det ska även gå att välja ut ett eller flera områden i kartan och skicka till Insikt för att analysera information från enbart de utvalda områdena. En prototyp med önskad funktionalitet har under arbetets gång tagits fram, men för att ha en säljbar produkt är en del arbeta kvar. Prototypen har visats för ett antal intresserade som tyckte det var intressant och tror att det är något som skulle kunna användas flitigt inom många områden.

Från ord till (e-)handling : - Integration av e-handelssystemi SiteVision

The client, Senselogic, had noticed an increased demand for an e-commerce system integrated into its product, SiteVision, something that did not previously exist. Senselogic wanted to integrate a third-party system to manage e-commerce. The problem was that there were very many e-commerce solutions to choose from. In order to select the best system it was necessary to evaluate the e-commerce systems and compare them to each other. To identify the elements that has to be included in an e-commerce system a study of literature was conducted. From the parts identified in the study of literature, a number of criteria were presented. Those criteria were then supplemented with additional criteria that Senselogic required of an e-commerce system before integrating it with SiteVision. Before the evaluation a number of test cases were created to test whether the ecommerce systems fulfilled to the criteria developed. These test cases were then used in the evaluation of the e-commerce systems while a test score was filled in. Then the evaluations of the different systems were compiled and compared in order to see which system best fulfilled the criteria. There was one system that scored higher than the others in the evaluation created. That was the system chosen to integrate with SiteVision.

En SOA utvärderingsmall med fokus på integration, arkitektur och tjänster : Ett praktikfall på Logica

Today, there are no standardized ways to characterize SOA, many are talking about SOA and many say they are using SOA. One way that we have chosen to characterize this phenomenon is through an evaluation that will indicate whether SOA have been used in the development. Basedon a Service Oriented Architecture literature study, we have created an evaluation pattern resulting SOA principles of integration, architecture and services. This evaluation was applied to Logica's own integration system AgrCom through an empirical study to result in a response indicating whether AgrCom is SOA based. The results of the evaluation show that AgrCom is part of an SOA solution but not an SOA as a whole concept. The study shows that it takes morethan just systems in an activity to be referred to as the SOA-based, hence the architecture of anactivity must be taken into account.

Newly Automated System For Integrated Assessment Of The Conditions Of Underwater Gas Pipelines

An underwater gas pipeline is the portion of the pipeline that crosses a river beneath its bottom. Underwater gas pipelines are subject to increasing dangers as time goes by. An accident at an underwater gas pipeline can lead to technological and environmental disaster on the scale of an entire region. Therefore, timely troubleshooting of all underwater gas pipelines in order to prevent any potential accidents will remain a pressing task for the industry. The most important aspect of resolving this challenge is the quality of the automated system in question. Now the industry doesn't have any automated system that fully meets the needs of the experts working in the field maintaining underwater gas pipelines. Principle Aim of this Research: This work aims to develop a new system of automated monitoring which would simplify the process of evaluating the technical condition and decision making on planning and preventive maintenance and repair work on the underwater gas pipeline. Objectives: Creation a shared model for a new, automated system via IDEF3; Development of a new database system which would store all information about underwater gas pipelines; Development a new application that works with database servers, and provides an explanation of the results obtained from the server; Calculation of the values MTBF for specified pipelines based on quantitative data obtained from tests of this system. Conclusion: The new, automated system PodvodGazExpert has been developed for timely and qualitative determination of the physical conditions of underwater gas pipeline; The basis of the mathematical analysis of this new, automated system uses principal component analysis method; The process of determining the physical condition of an underwater gas pipeline with this new, automated system increases the MTBF by a factor of 8.18 above the existing system used today in the industry.

Evaluation Of Reservoir Model Integration With Deterministic And Probabilistic Streamflow Forecasts

Due to the increase in water demand and hydropower energy, it is getting more important to operate hydraulic structures in an efficient manner while sustaining multiple demands. Especially, companies, governmental agencies, consultant offices require effective, practical integrated tools and decision support frameworks to operate reservoirs, cascades of run-of-river plants and related elements such as canals by merging hydrological and reservoir simulation/optimization models with various numerical weather predictions, radar and satellite data. The model performance is highly related with the streamflow forecast, related uncertainty and its consideration in the decision making. While deterministic weather predictions and its corresponding streamflow forecasts directly restrict the manager to single deterministic trajectories, probabilistic forecasts can be a key solution by including uncertainty in flow forecast scenarios for dam operation. The objective of this study is to compare deterministic and probabilistic streamflow forecasts on an earlier developed basin/reservoir model for short term reservoir management. The study is applied to the Yuvacık Reservoir and its upstream basin which is the main water supply of Kocaeli City located in the northwestern part of Turkey. The reservoir represents a typical example by its limited capacity, downstream channel restrictions and high snowmelt potential. Mesoscale Model 5 and Ensemble Prediction System data are used as a main input and the flow forecasts are done for 2012 year using HEC-HMS. Hydrometeorological rule-based reservoir simulation model is accomplished with HEC-ResSim and integrated with forecasts. Since EPS based hydrological model produce a large number of equal probable scenarios, it will indicate how uncertainty spreads in the future. Thus, it will provide risk ranges in terms of spillway discharges and reservoir level for operator when it is compared with deterministic approach. The framework is fully data driven, applicable, useful to the profession and the knowledge can be transferred to other similar reservoir systems.

Um modelo de EIS - enterprise information system - que identifica características para comportamentos proativos na recuperação de informações

Este documento constitui uma dissertação de mestrado, requisito parcial para a obtenção do grau de Mestre em Administração pela Universidade Federal do Rio Grande do Sul. O tema da pesquisa é o relacionamento existente entre as características técnicas de um projeto de sistema de informação e apoio à decisão e os comportamentos dos usuários no seu uso. O objetivo é desenvolver e apresentar um modelo conceitual de EIS (“Enterprise Information Systems”), a partir da literatura, das tendências tecnológicas e de estudos de caso, que identifique características para comportamentos proativos dos usuários na recuperação de informações. Adotou-se o conceito de comportamento proativo na recuperação de informações como a combinação das categorias exploração de dados e busca focada. Entre os principais resultados, pode-se destacar a definição de categorias relacionadas com as características dos sistemas - flexibilidade, integração e apresentação - e de categorias relacionadas com os comportamentos dos usuários na recuperação de informações - exploração de dados e busca focada, bem como a apresentação de um modelo conceitual para sistemas EIS. Pode-se destacar também a exploração de novas técnicas para análise qualitativa de dados, realizada com o objetivo de buscar uma maior preservação do contexto nos estudos de caso.

Seven stories: location based story-delivery system

Location aware content-based experiences have a substantial tradition in HCI, several projects over the last two decades have explored the association of digital media to specific locations or objects. However, a large portion of the literature has little focus on the creative side of designing of the experience and on the iterative process of user evaluations. In this thesis we present two iterations in the design and evaluation of a location based story delivery system (LBSDS), inspired by local folklore and oral storytelling in Madeira. We started by testing an already existing location based story platform, PlaceWear, with short multimedia clips that recounted local traditions and folktales, to this experience we called iLand. An initial evaluation of iLand, was conducted; we shadowed users during the experience and then they responded to a questionnaire. By analyzing the evaluation results we uncovered several issues that informed the redesign of the system itself as well as part of the story content. The outcome of this re design was the 7Stories experience. In the new experience we performed the integration of visual markers in the interface and the framing of the fragmented story content through the literary technique of the narrator. This was done aiming to improving the connection of the audience to the physical context where the experience is delivered. The 7Stories experience was evaluated following a similar methodology to the iLand evaluation but the user’s experience resulted considerably different; because of the same setting for the experience in both versions and the constancy of the most of the content across the two versions we were able to assess the specific effect of the new design and discuss its strengths and shortcomings. Although we did not run a formal and strict comparative test between the two evaluations, it is evident from the collected data how the specific design changes to our LBSDS influenced the user experience.

Using Neo4J geospatial data storage and integration

Online geographic-databases have been growing increasingly as they have become a crucial source of information for both social networks and safety-critical systems. Since the quality of such applications is largely related to the richness and completeness of their data, it becomes imperative to develop adaptable and persistent storage systems, able to make use of several sources of information as well as enabling the fastest possible response from them. This work will create a shared and extensible geographic model, able to retrieve and store information from the major spatial sources available. A geographic-based system also has very high requirements in terms of scalability, computational power and domain complexity, causing several difficulties for a traditional relational database as the number of results increases. NoSQL systems provide valuable advantages for this scenario, in particular graph databases which are capable of modeling vast amounts of inter-connected data while providing a very substantial increase of performance for several spatial requests, such as finding shortestpath routes and performing relationship lookups with high concurrency. In this work, we will analyze the current state of geographic information systems and develop a unified geographic model, named GeoPlace Explorer (GE). GE is able to import and store spatial data from several online sources at a symbolic level in both a relational and a graph databases, where several stress tests were performed in order to find the advantages and disadvantages of each database paradigm.

Stochastic simulation of time-series models combined with geostatistics to predict water-table scenarios in a Guarani Aquifer System outcrop area, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Integrated sediment quality assessment in Paranagua Estuarine System, Southern Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Operational parameters of soybean seeding in santa fe system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potassium cycling in a corn-brachiaria cropping system

Growing corn mixed with forage crops can be an alternative for pasture and Mulch production during relatively dry winters in tropical areas, making no-till feasible in some regions. However, little is known about nutrient dynamics in this cropping system. The objective of the present work was to evaluate K dynamics in a production system in which corn was either grown as a sole crop or mixed with Brachiaria brizantha. In the second year of the experiment, nitrogen rates ranging from 0 to 200 kg ha(-1) were applied to the system. Dry matter yields and potassium contents in the soil, as well as residues and plants were determined at corn planting and harvest. Potassium balance in the system was calculated. Corn grain yield in mixed crop responded up to 200 kg ha(-1) N. The introduction of brachiaria in the system resulted in higher amounts of straw on the soil Surface and higher K recycling. Soil exchangeable K balance showed an excess K for both N rates only in the mixed system, however, when non-exchangeable K was also included in calculations, excess K was found in both mixed and sole corn systems. Large amounts of non-exchangeable K were taken up in the system involving brachiaria, which showed a considerable capacity in recycling K, increasing its contents in the surface soil layer. (c) 2008 Elsevier B.V. All rights reserved.

Integration of a regional GPS network within ITRF using precise point positioning

GPS precise point positioning (PPP) can provide high precision 3-D coordinates. Combined pseudorange and carrier phase observables, precise ephemeris and satellite clock corrections, together with data from dual frequency receivers, are the key factors for providing such levels of precision (few centimeters). In general, results obtained from PPP are referenced to an arbitrary reference frame, realized from a previous free network adjustment, in which satellite state vectors, station coordinates and other biases are estimated together. In order to obtain consistent results, the coordinates have to be transformed to the relevant reference frame and the appropriate daily transformation parameters must be available. Furthermore, the coordinates have to be mapped to a chosen reference epoch. If a velocity field is not available, an appropriated model, such as NNR-NUVEL-IA, has to be used. The quality of the results provided by this approach was evaluated using data from the Brazilian Network for Continuous Monitoring of the Global Positioning System (RBMC), which was processed using GIPSY-OASIS 11 software. The results obtained were compared to SIRGAS 1995.4 and ITRF2000, and reached precision better than 2cm. A description of the fundamentals of the PPP approach and its application in the integration of regional GPS networks with ITRF is the main purpose of this paper.