Calcium, vitamin D, casein and whey protein intakes and periodontitis among Danish adults

Objective: To investigate whether intakes of Ca, vitamin D, casein and whey are associated with periodontitis and to investigate the possibility of interactions between them. Design: Cross-sectional study. An Internet-based, 267-item FFQ was used to assess dietary intake. Intakes of casein (32·0 g/d), whey proteins (9·6 g/d) and vitamin D (5·8 μg/d) were classified as within v. above the 50th percentile. Ca intake was classified as within v. below age-specific recommendations. Severe periodontitis was defined as having ≥2 inter-proximal sites with clinical attachment loss ≥6 mm (not on the same tooth) and ≥1 inter-proximal site with pocket depth ≥5 mm. Since vitamin D influences Ca absorption, models were stratified by lower and higher (<5·8 v. ≥5·8 µg/d) vitamin D intake. Setting Danish Health Examination Survey (DANHES) 2007–2008. Subjects Adult participants (n 3287) in the oral health study of DANHES 2007–2008. Results Intakes of Ca within recommendations (OR=0·76; 95 % CI 0·58, 0·99), whey ≥9·6 g/d (OR=0·75; 95 % CI 0·58, 0·97) and casein ≥32 g/d (OR=0·75 95 % CI 0·58, 0·97) were associated with lower likelihood of severe periodontitis after adjustment for age, gender, education, smoking, sucrose intake, alcohol consumption, number of teeth, daily brushing, regular visits to the dentist and chronic illness, irrespective of vitamin D intake levels. Intake of vitamin D alone was not associated severe with periodontitis. Conclusions Intakes of Ca, casein and whey protein were inversely associated with periodontitis. Consumption of foods rich in Ca, casein and whey (e.g. dairy foods) should be promoted, as they may contribute to the prevention of periodontitis. Further longitudinal studies are required to confirm these associations.

Calcium, vitamin D, casein and whey protein intakes and periodontitis among Danish adults

OBJECTIVE: To investigate whether intakes of Ca, vitamin D, casein and whey are associated with periodontitis and to investigate the possibility of interactions between them. DESIGN: Cross-sectional study. An Internet-based, 267-item FFQ was used to assess dietary intake. Intakes of casein (32.0 g/d), whey proteins (9.6 g/d) and vitamin D (5.8 mug/d) were classified as within v. above the 50th percentile. Ca intake was classified as within v. below age-specific recommendations. Severe periodontitis was defined as having >/=2 inter-proximal sites with clinical attachment loss >/=6 mm (not on the same tooth) and >/=1 inter-proximal site with pocket depth >/=5 mm. Since vitamin D influences Ca absorption, models were stratified by lower and higher (<5.8 v. >/=5.8 microg/d) vitamin D intake. SETTING: Danish Health Examination Survey (DANHES) 2007-2008. SUBJECTS: Adult participants (n 3287) in the oral health study of DANHES 2007-2008. RESULTS: Intakes of Ca within recommendations (OR=0.76; 95 % CI 0.58, 0.99), whey >/=9.6 g/d (OR=0.75; 95 % CI 0.58, 0.97) and casein >/=32 g/d (OR=0.75 95 % CI 0.58, 0.97) were associated with lower likelihood of severe periodontitis after adjustment for age, gender, education, smoking, sucrose intake, alcohol consumption, number of teeth, daily brushing, regular visits to the dentist and chronic illness, irrespective of vitamin D intake levels. Intake of vitamin D alone was not associated severe with periodontitis. CONCLUSIONS: Intakes of Ca, casein and whey protein were inversely associated with periodontitis. Consumption of foods rich in Ca, casein and whey (e.g. dairy foods) should be promoted, as they may contribute to the prevention of periodontitis. Further longitudinal studies are required to confirm these associations.

Determination of tartaric acid in wines by FIA with tubular tartrate-selective electrodes

A flow injection analysis (FIA) system comprising a tartrate- (TAT) selective electrode has been developed for determination of tartaric acid in wines. Several electrodes constructed for this purpose had a PVC membrane with a complex of quaternary ammonium and TAT as anion exchanger, a phenol derivative as additive, and a more or less polar mediator solvent. Characterization of the electrodes showed behavior was best for membranes with o-nitrophenyl octyl ether as solvent. On injection of 500 μL into a phosphate buffer carrier (pH = 3.1; ionic strength 10–2 mol/L) flowing at 3 mL/min, the slope was 58.06 ± 0.6 with a lower limit of linear range of 5.0 × 10–4 mol/L TAT and R2 = 0.9989. The interference of several species, e.g. chloride, bromide, iodide, nitrate, gallic acid, tannin, sucrose, glucose, fructose, acetate, and citrate, was evaluated in terms of potentiometric selectivity coefficients. The Hofmeister series was followed for inorganic species and the most interfering organic ion was citrate. When red and white wines were analyzed and the results compared with those from an independent method they were found to be accurate, with relative standard deviations below 5.0%.

Citrate selective electrodes for the flow injection analysis of soft drinks, beers and pharmaceutical products

Aiming the establishment of simple and accurate readings of citric acid (CA) in complex samples, citrate (CIT) selective electrodes with tubular configuration and polymeric membranes plus a quaternary ammonium ion exchanger were constructed. Several selective membranes were prepared for this purpose, having distinct mediator solvents (with quite different polarities) and, in some cases, p-tert-octylphenol (TOP) as additive. The latter was used regarding a possible increase in selectivity. The general working characteristics of all prepared electrodes were evaluated in a low dispersion flow injection analysis (FIA) manifold by injecting 500µl of citrate standard solutions into an ionic strength (IS) adjuster carrier (10−2 mol l−1) flowing at 3ml min−1. Good potentiometric response, with an average slope and a repeatability of 61.9mV per decade and ±0.8%, respectively, resulted from selective membranes comprising additive and bis(2-ethylhexyl)sebacate (bEHS) as mediator solvent. The same membranes conducted as well to the best selectivity characteristics, assessed by the separated solutions method and for several chemical species, such as chloride, nitrate, ascorbate, glucose, fructose and sucrose. Pharmaceutical preparations, soft drinks and beers were analyzed under conditions that enabled simultaneous pH and ionic strength adjustment (pH = 3.2; ionic strength = 10−2 mol l−1), and the attained results agreed well with the used reference method (relative error < 4%). The above experimental conditions promoted a significant increase in sensitivity of the potentiometric response, with a supra-Nernstian slope of 80.2mV per decade, and allowed the analysis of about 90 samples per hour, with a relative standard deviation <1.0%.

Construction and evaluation of cysteine selective electrodes for FIA analysis of pharmaceuticals

A flow injection analysis (FIA) system comprising a cysteine selective electrode as detection system was developed for determination of this amino acid in pharmaceuticals. Several electrodes were constructed for this purpose, having PVC membranes with different ionic exchangers and mediator solvents. Better working characteristics were attained with membranes comprising o-nitrophenyl octyl ether as mediator solvent and a tetraphenylborate based ionic-sensor. Injection of 500 µL standard solutions into an ionic strength adjuster carrier (3x10-3 M) of barium chloride flowing at 2.4mL min-1, showed linearity ranges from 5.0x10-5 to 5.0x10-3 M, with slopes of 76.4±0.6mV decade-1 and R2>0.9935. Slope decreased significantly under the requirement of a pH adjustment, selected at 4.5. Interference of several compounds (sodium, potassium, magnesium, barium, glucose, fructose, and sucrose) was estimated by potentiometric selectivity coefficients and considered negligible. Analysis of real samples were performed and considered accurate, with a relative error to an independent method of +2.7%.

Ciprofloxacin-imprinted polymeric receptors as ionophores for potentiometric transduction

A 3D-mirror synthetic receptor for ciprofloxacin host–guest interactions and potentiometric transduction is presented. The host cavity was shaped on a polymeric surface assembled with methacrylic acid or 2-vinyl pyridine monomers by radical polymerization. Molecularly imprinted particles were dispersed in 2-nitrophenyl octyl ether and entrapped in a poly(vinyl chloride) matrix. The sensors exhibited a near-Nernstian response in steady state evaluations. Slopes and detection limits ranged from 26.8 to 50.0mVdecade−1 and 1.0×10−5 to 2.7×10−5 mol L−1, respectively. Good selectivity was observed for trimethoprim, enrofloxacin, tetracycline, cysteine, galactose, hydroxylamine, creatinine, ammonium chloride, sucrose, glucose, sulphamerazine and sulfadiazine. The sensors were successfully applied to the determination of ciprofloxacin concentrations in fish and in pharmaceuticals. The method presented offered the advantages of simplicity, accuracy, applicability to colored and turbid samples and automation feasibility, as well as confirming the use of molecularly imprinted polymers as ionophores for organic ion recognition in potentiometric transduction.

Artificial antibodies for troponin T by its imprinting on the surface of multiwalled carbon nanotubes: Its use as sensory surfaces

A novel artificial antibody for troponin T (TnT) was synthesized by molecular imprint (MI) on the surface of multiwalled carbon nanotubes (MWCNT). This was done by attaching TnT to the MWCNT surface, and filling the vacant spaces by polymerizing under mild conditions acrylamide (monomer) in N,N′-methylenebisacrylamide (cross-linker) and ammonium persulphate (initiator). After removing the template, the obtained biomaterial was able to rebind TnT and discriminate it among other interfering species. Stereochemical recognition of TnT was confirmed by the non-rebinding ability displayed by non-imprinted (NI) materials, obtained by imprinting without a template. SEM and FTIR analysis confirmed the surface modification of the MWCNT. The ability of this biomaterial to rebind TnT was confirmed by including it as electroactive compound in a PVC/plasticizer mixture coating a wire of silver, gold or titanium. Anionic slopes of 50 mV decade−1 were obtained for the gold wire coated with MI-based membranes dipped in HEPES buffer of pH 7. The limit of detection was 0.16 μg mL−1. Neither the NI-MWCNT nor the MWCNT showed the ability to recognize the template. Good selectivity was observed against creatinine, sucrose, fructose, myoglobin, sodium glutamate, thiamine and urea. The sensor was tested successfully on serum samples. It is expected that this work opens new horizons on the design of new artificial antibodies for complex protein structures.

Ciprofloxacin-imprinted polymeric receptors as ionophores for potentiometric transduction

A 3D-mirror synthetic receptor for ciprofloxacin host–guest interactions and potentiometric transduction is presented. The host cavity was shaped on a polymeric surface assembled with methacrylic acid or 2-vinyl pyridine monomers by radical polymerization. Molecularly imprinted particles were dispersed in 2-nitrophenyl octyl ether and entrapped in a poly(vinyl chloride) matrix. The sensors exhibited a near-Nernstian response in steady state evaluations. Slopes and detection limits ranged from 26.8 to 50.0 mV decade−1 and 1.0 × 10−5 to 2.7 × 10−5 mol L−1, respectively. Good selectivity was observed for trimethoprim, enrofloxacin, tetracycline, cysteine, galactose, hydroxylamine, creatinine, ammonium chloride, sucrose, glucose, sulphamerazine and sulfadiazine. The sensors were successfully applied to the determination of ciprofloxacin concentrations in fish and in pharmaceuticals. The method presented offered the advantages of simplicity, accuracy, applicability to colored and turbid samples and automation feasibility, as well as confirming the use of molecularly imprinted polymers as ionophores for organic ion recognition in potentiometric transduction.

Production of bacterial biopolymers from industrial fat-containing wastes

Dissertation presented in partial fulfilment of the Requirements for the Degree of Master in Biotechnology

Bioproduction of succinic acid from renewable feedstocks by Actinobacillus succinogenes 130Z

Succinic acid (SA) is a highly versatile building block that is used in a wide range of industrial applications. The biological production of succinic acid has emerged in the last years as an efficient alternative to the chemical production based on fossil fuels. However, in order to fully replace the competing petro-based chemical process from which it has been produced so far, some challenges remain to be surpassed. In particular, one main obstacle would be to reduce its production costs, mostly associated to the use of refined sugars. The present work is focused on the development of a sustainable and cost-e↵ective microbial production process based on cheap and renewable resources, such as agroindustrial wastes. Hence, glycerol and carob pods were identified as promising feedstocks and used as inexpensive carbon sources for the bioproduction of succinic acid by Actinobacillus succinogenes 130Z, one of the best naturally producing strains. Even though glycerol is a highly available carbon source, as by-product of biodiesel production, its consumption by A. succinogenes is impaired due to a redox imbalance during cell growth. However, the use of an external electron acceptor such as dimethylsulfoxide (DMSO) may improve glycerol metabolism and succinic acid production by this strain. As such, DMSO was tested as a co-substrate for glycerol consumption and concentrations of DMSO between 1 and 4% (v/v) greatly promoted glycerol consumption and SA production by this biocatalyst. Aiming at obtaining higher succinic acid yield and production rate, batch and fed-batch experiments were performed under controlled cultivation conditions. Batch experiments resulted in a succinic acid yield on glycerol of 0.95 g SA/g GLY and a production rate of 2.13 g/L.h, with residual production of acetic and formic acids. In fed-batch experiment, the SA production rate reached 2.31 g/L.h, the highest value reported in the literature for A. succinogenes using glycerol as carbon source. DMSO dramatically improved the conversion of glycerol by A. succinogenes and may be used as a co-substrate, opening new perspectives for the use of glycerol by this biocatalyst. Carob pods, highly available in Portugal as a residue from the locust bean gum industry, contain a significant amount of fermentable sugars such as sucrose, glucose and fructose and were also used as substrate for succinic acid production. Sugar extraction from raw and roasted carobs was optimized varying solid/water ratio and extraction time, maximizing sugar recovery while minimizing the extraction of polyphenols. Kinetic studies of glucose, fructose and sucrose consumption by A. succinogenes as individual carbon sources till 30 g/L were first determined to assess possible metabolic diferences. Results showed no significant diferences related to sugar consumption and SA production between the diferent sugars. Carob pods water extracts were then used as carbon source during controlled batch cultivations. (...)

Purification and characterization of (Na+ + K+)-ATPase from toad kidney

This report describes the partial purification and the characteristics of (Na+ + K+)-ATPase (ATP phosphohydrolase, EC 3.6.1.3) from an amphibian source. Toad kidney microsomes were solubilized with sodium deoxycholate and further purified by sodium dodecyl sulphate treatment and sucrose gradient centrifugation, according to the methods described by Lane et al. [(1973) J. Biol. Chem. 248, 7197--7200], Jørgensen [(1974) Biochim. Biophys. Acta 356, 36--52] and Hayashi et al. [(1977) Biochim. Biophys. Acta 482, 185--196]. (Na+ + K+)-ATPase preparations with specific activities up to 1000 mumol Pi/mg protein per h were obtained. Mg2+-ATPase only accounted for about 2% of the total ATPase activity. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis revealed three major protein bands with molecular weights of 116 000, 62 000 and 26 000. The 116 000 dalton protein was phosphorylated by [gamma-32P]ATP in the presence of sodium but not in the presence of potassium. The 62 000 dalton component stained for glycoproteins. The Km for ATP was 0.40 mM, for Na+ 12.29 mM and for K+ 1.14 mM. The Ki for ouabain was 35 micron. Temperature activation curves showed two activity peaks at 37 degrees C and at 50 degrees C. The break in the Arrhenius plot of activity versus temperature appeared at 15 degrees C.

Fructose toxicity: is the science ready for public health actions?

PURPOSE OF REVIEW: The assumption that fructose may be toxic and involved in the pathogenesis of noncommunicable diseases such as obesity, diabetes mellitus, dyslipidemia, and even cancer has resulted in the call for public health action, such as introducing taxes on sweetened beverages. This review evaluates the scientific basis for such action. RECENT FINDINGS: Although some studies hint towards some potential adverse effects of excessive fructose consumption especially when combined with excess energy intake, the results from clinical trials do not support a significant detrimental effect of fructose on metabolic health when consumed as part of a weight-maintaining diet in amounts consistent with the average-estimated fructose consumption in Western countries. However, definitive studies are missing. SUMMARY: Public health policies to eliminate or limit fructose in the diet should be considered premature. Instead, efforts should be made to promote a healthy lifestyle that includes physical activity and nutritious foods while avoiding intake of excess calories until solid evidence to support action against fructose is available. Public health is almost certainly to benefit more from policies that are aimed at promoting what is known to be good than from policies that are prohibiting what is not (yet) known to be bad.

An investigation of sugar feeding by black flies (Diptera: Simuliidae)

Although much research has been conducted on blood-meal acquisition in adult female black flies (Diptera: Simuliidae), the same cannot be said for sugarmeals. Both sexes feed on sugar which provides energy for flight and it has been commonly held that nectar is the major carbohydrate source. This thesis addresses the question of whether a non-floral carbohydrate source, specifically homopteran honeydew, is ingested by male and female black flies. Black flies reared in the laboratory have been observed to readily ingest freshly excreted and older (dry) honeydew when presented with honeydew coated tamarack branches. Field work was conducted in Algonquin Park, Ontario in the spring and summer of 1993. Three separate studies were designed to test whether homopteran honeydew is an important carbohydrate source for black flies and whether flies from different habitats utilize different sugar sources. The sugars melezitose and / or stachyose are known to occur in a variety of homopteran honeydews and therefore were used as indicators of honeydew feeding by black flies. In the first study, black flies were collected with insect nets from a stand of Larix larcina heavily infested with honeydew - producing homopterans (Adelges lariciatus). Six black fly species were captured: Simulium venustum, S. rostra tum, S. vittatum, Stegopterna mutata, S. aureum and S. quebecense. Samples of honeydew and individual black flies were tested using thin layer chromatography (T. L. C.) with fructose, glucose, sucrose, turanose, melezitose, raffinose and stachyose as standards. All sugars except turanose and melezitose were found in the adelgid honeydew samples. Since the sugar melezitose was absent from ~ honeydew samples, stachyose was used to indicate that black flies were feeding from this particular honeydew source. Of the 201 black flies tested, 194 contained sugars which occurred in 16 combinations. Stachyose combinations excluding melezitose, present in 45.9 % of flies, were used to indicate that black flies had been feeding on the adelgid honeydew. In the second study, black flies were collected in the morning and evening on 8 collection dates, using a vehicle mounted insect net. The crops and midguts of 10 male and 10 female Simulium venustum were dissected on each sample date. In total the gut contents of 320 individual flies were analysed by T. L. C. The sugars identified from these flies were present in the following proportions: fructose (100.0%), glucose (100.0%), sucrose/turanose (50.4%), melezitose (30.3%), raffinose (18.8%) and stachyose (8.7%). These sugars occurred in fourteen different combinations. It is argued that the presence of melezitose and / or stachyose indicates that black flies had fed on homopteran honeydew. Significantly more female flies (40.0%) than male flies (27.5%) had fed on honeydew. In the third study, adult black flies were sampled by sweep netting vegetation in four habitats in the morning and evening on 8 collection dates. The habitats are as follows: (1) Davies Bog, (2) Abandoned Air Field (dominated by blueberries, Vaccinium spp.), (3) Deciduous Habitat and (4) Coniferous Habitat. Sugars in the crops and midguts of female flies were tested by T. L. C. and, for S. venustum, it was found that significantly fewer flies (18.8%) from the Air Field contained honeydew than from the other three sites (Davies Bog, 34.4%; Deciduous Habitat, 36.2%; Coniferous Habitat, 25.0%). Of the 1287 black flies tested individually by T. L. C. 441 (34.3%) contained melezitose and / or stachyose sugars indicating that this proportion of the population were feeding from Homopteran honeydew. It is therefore clear that floral (nectar) sugars are not the only source of carbohydrates available to black flies.

Characterisation and optimisation of the flavour of health-promoting, plantderived bitterants in functional beverages.

Flavour is a combination of taste, odour, and chemesthetic sensations. Close associations exist between these sensory modalities, and thus, the overall flavour of a food or beverage product can change when the intensity of one or more of these sensations is altered. Strategies to modify flavour are often utilized by the food industry, and are central to the engineering of new and reformulated products. For functional food and beverages, flavour modification is particularly important, as fortifying agents can elicit high levels of less than desirable sensations, such as bitterness and astringency. The application of various flavour modifying strategies can decrease the perceived intensity of these sensations, and in tum, improve the sensory profile of the product. This collection of studies describes the sensory characteristics of experimental functional beverages fortified with trans-resveratrol, (+)-catechin, and/or caffeine, and examines the impact of novel flavour modifying strategies on the perceived flavour of these beverages. In the first study, results demonstrate that the flavour profile of Cabemet Sauvignon wines fortified with 20 mglL and 200 mg/L of trans-resveratrol is not perceived as different compared to control wine (0 mglL). However, Riesling wine fortified with 200 mg/L is perceived as significantly higher in bitterness compared to 20 mglL and control. For some functional food formulations, alternative strategies for flavour modification are needed. Traditional methods, such as the addition of sucrose and sodium chloride, may decrease the perceived 'healthiness' of a product, and thus, may be sub-optimal. In a second study, high and low concentrations of five different bitter inhibiting compounds - 'bitter blockers' - (B-cyclodextrin, homoeridictyol sodium salt, carboxymethylcellulose - low viscosity, zinc sulfate, magnesium sulfate) were tested for their efficacy towards decreasing the bitterness of high and low concentrations of caffeine and (+)catechin - two health-relevant, plant-derived bitterants. B-cyclodextrin and homoeridictyol sodium salt were the most effective blockers at decreasing (+ )-catechin and caffeine, respectively. In addition to bitter blockers, additional flavour modifying strategies, either alone or in combination - may also be successful in functional food formulations. Both sucrose and rebaudioside A - a plant-derived sweetener - were effective at decreasing the bitterness of (+)catechin. When added to (+)-catechin along with B-cyc1odextrin, both sweeteners provided the most effective decrease in bitterness compared to binary, ternary, or quaternary mixtures of (+)catechin together with bitter blockers, sweeteners, andlor odourants. The perceived intensity of sensations elicited by sweeteners and odourants was not affected by the addition of bitter blockers, and thus, their impact within these complex matrices is minimal. In addition, withinmodal (taste-taste) compared to cross-modal (taste-odour) sensory interactions were more effective at decreasing the bitterness of (+ )-catechin. Overall, results from these studies demonstrate that certain novel, alternative flavour modifying approaches may be successful towards lowering the bitterness and astringency elicited by (+ )-catechin and caffeine in aqueous solutions.

Étude du rôle de la tyrosine kinase Src dans la régulation de la signalisation des récepteurs opioïdes delta (∆OR)

Les opioïdes sont les analgésiques les plus efficaces mais leur utilisation est limitée par la tolérance, un processus lié en partie à la désensibilisation des récepteurs. Le rôle de la présente étude était de mieux caractériser le processus de désensibilisation des récepteurs et plus particulièrement, d’étudier le rôle de la tyrosine kinase Src sur la régulation de la signalisation des récepteurs delta opioïdes. Nos résultats démontrent que l’inhibition pharmacologique avec PP2 (à faible concentration : 20- 40µM) ou encore l’inhibition moléculaire de la kinase avec de faibles concentrations d’ADN d’un mutant dominant inactif de Src (0,2µg/ml) potentialise l’amplitude et la durée de l’activation de la cascade ERK lorsqu’un agoniste, DPDPE (1µM; 5 min), se lie aux récepteurs. Nous avons également démontré que de fortes concentrations d’inhibiteurs de Src (80 et 100µM de PP2 ou 1µg/ml d’ADN du mutant dominant négatif) bloquent la cascade des MAPK suivant la stimulation de DOR par l’agoniste DPDPE. Ces observations indiquent que Src a un effet biphasique sur l’activité de ERK : l’inhibition complète de Src inhibe l’activité de la cascade MAPK alors qu’une inhibition modérée potentialise cette même cascade. Nous pensons aussi que de fortes concentrations des bloqueurs de Src interfèrent avec l’activation de ERK alors que de faibles concentrations interfèrent avec la désensibilisation des récepteurs. Cette possibilité a été testée à l’aide d’essais d’accumulation d’AMPc qui visaient à évaluer l’effet des bloqueurs de Src (PP2, 20 µM; 1h) sur la désensibilisation induite par un agoniste. L'activation de DOR par DPDPE inhibe la production d’AMPc, préalablement stimulée par du forskolin, de façon dose-dépendante. Le maximum d'inhibition observé est de 61%, mais lors d’un prétraitement au DPDPE (1 µM, 30 min) l’inhibition maximale est réduite à 72% de l’inhibition initiale observée. Cependant, un prétraitement des cellules au PP2 (20µM pendant 1 heure) avant d’effectuer la désensibilisation protège contre cette désensibilisation. L’effet protecteur des bloqueurs de Src n’entraîne pas de changement au niveau de l’internalisation des DOR mais l’altération de leur internalisation via un mutant tronqué du DOR ou via un milieu sucré hypertonique (0.4M de saccharose) réduit cette protection. Ces données suggèrent alors que l’internalisation optimale du récepteur est nécessaire pour que l’effet protecteur prenne place. Nous concluons donc que Src contribue à la désensibilisation de DOR après que l’internalisation du DOR soit survenue.