1000 resultados para substituição de alumínio
Resumo:
Realizou-se um experimento com cabras Saanen, primíparas, pesando em média, 50 kg, alojadas em baias individuais de 3 m², objetivando avaliar a substituição da proteína do farelo de soja (FS) pela proteína da farinha de glúten de milho (FGM), na produção e composição do leite, consumo voluntário e níveis de uréia plasmática. O delineamento experimental foi o triplo quadrado latino 4x4, com quatro períodos de 21 dias, sendo 14 dias de adaptação à dieta e sete dias para colheita das amostras. As cabras foram alimentadas e ordenhadas pela manhã e tarde. Os níveis de substituição estudados foram 0, 10, 30 e 50% de FGM (base na proteína bruta). A substituição do farelo de soja pela farinha de glúten de milho não afetou o consumo (kg/dia e %PV) de matéria seca, proteína bruta e fibra em detergente ácido, mas houve efeito quadrático, para o consumo de fibra em detergente neutro (kg/dia e % PV). Houve efeito sobre os níveis de uréia plasmática (UP), que foram inferiores para os menores níveis de substituição, sendo os maiores valores de UP observados para o tratamento que possuía somente FS. A produção de leite decresceu linearmente com a inclusão da farinha de glúten de milho. Os níveis de substituição resultaram em decréscimos lineares na produção de gordura (kg/dia), no teor de gordura do leite (%) e no teor de sólidos totais. Houve efeito quadrático para produção de lactose (kg/dia), observando-se o menor valor estimado para o nível de substituição de 31,6%. Não foi observado efeito sobre a produção de proteína bruta no leite, cujo valor médio foi de 0,083 kg/dia. Os teores de proteina bruta, lactose e sólidos totais não sofreram efeito dos níveis de substituição, sendo os valores médios percentuais de 2,98; 4,35 e 11,51%, respectivamente.
Resumo:
Foi avaliado o efeito, no desempenho animal, da adição da casca do grão de soja em substituição ao grão de sorgo na fração concentrada da dieta de novilhos confinados na fase de terminação dos 19 aos 23 meses de idade. Os tratamentos foram correspondentes aos diferentes níveis de substituição do grão de sorgo por casca de soja: 0, 25, 50, 75 e 100%. A dieta com relação volumoso:concentrado de 60:40 continha 12% de proteína bruta. Analisando os dados por regressão, verificou-se comportamento quártico para ganho de peso diário e conversão alimentar, com valores de 1,040; 1,242; 1,167; 1,264 e 1,208 kg para ganho e de 8,490; 7,340; 7,611; 7,029 e 7,201 para conversão alimentar, respectivamente, nos níveis 0, 25, 50, 75 e 100% de substituição do sorgo pela casca de soja. Comportamento linear decrescente foi observado para consumo diário de matéria seca por 100 kg de peso vivo, com valores de 2,43; 2,46; 2,40; 2,37 e 2,32%, e por unidade de tamanho metabólico, de 106,5; 107,6; 105,4; 104,4 e 102,2 g, respectivamente. Verificou-se, por intermédio da análise de contrastes, que os animais alimentados com as dietas contendo casca de soja apresentaram melhores ganho de peso e conversão alimentar em relação aos alimentados com a dieta que continha somente sorgo.
Resumo:
Quatro búfalos com cânulas ruminais foram distribuídos aleatoriamente em quadrado latino 4 x 4, compreendendo quatro rações com feno de capim-coastcross (Cynodon dactylon) (50% MS) e níveis crescentes de polpa cítrica peletizada em substituição ao milho em grão moído no concentrado (0, 33, 66 e 100% MS). Foram avaliadas a degradabilidade dos nutrientes e a população de protozoários no rúmen. Houve efeito quadrático da fração solúvel dos nutrientes entre os tratamentos, com valores maiores nos dois extremos. A taxa de degradação da PB do feno e da MS da polpa cítrica apresentou-se linear com aumento da polpa cítrica na ração. As rações contendo polpa cítrica promoveram menores concentrações de Entodinium e número total de ciliados/mL que a dieta só com milho. Houve predominância dos Entodinium nas dietas contendo somente milho ou somente polpa cítrica, enquanto em mistura predominaram os ciliados da subfamília Diplodiniinae. Observou-se efeito de interação da polpa cítrica com o milho, promovendo modificações no metabolismo ruminal, especialmente na solubilidade dos nutrientes, na curva do pH e na composição da fauna.
Resumo:
Fifteen animals from Canchim group and fifteen from Nelore were observed in the following treatments: water (A), molasses soluble + magnesium oxide (V) and molasses soluble + magnesium oxide + sodium bicarbonate (V+B). They were observed during continuous 24 hours every 30 days up to 90 days periods. During the weighting, every 28 days blood samples were collected to determine metabolic outline. Treatments did not affect (P>.05) animal behaviour on metabolic and the obtained mean values were within the normal range. They were, respectively for Canchim and Nelore: Feeding 270 and 223 minutes; Rumination 374 and 356 minutes; Idleness 745 and 863 minutes; Glicose 86 and 88 mg/dl; Urea 10 and 23 mg/dl: Uric acid 1,3 and 1,2 mg/dl; Total protein 7,0 and 6,8 g/dl; Albumin 3,1 and 3,1 g/dl; Creatinin 1,5 and 1,6 mg/dl; Sodium 140 and 142 meq/dl; Potassium 4,2 and 4,3 meq/1 and Calcium 10,0 and 9,8 mg/dl. It was concluded that molasses soluble as a substitute of water has not changed the ethologic parameters neither metabolic outline of both genetic group when in finishing feedlot.
Resumo:
During 90 days 243 finishing feedlot animals from two genetic groups, were weighed every 28 days in a randomized experimental procedure in a 2 x 3 factorial arrangement, with two breeds - Nelore (Nel) and Canchim (Can) - and three treatments: water (A), cane stillage + magnesium oxide (V) and cane stillage + magnesium oxide + sodium bicarbonate (V + B). The diet for all treatments was composed of 70% of corn silage and 30% of chopped sugar cane ad libitum plus 1 kg of ground corn and 1,5 kg of soluble yeast per animal. Results showed higher weight gain (P < 0,01) of the Can group relation to those of Nel, having respectively 1,35 and 1,22 kg/head/day. Both Can and Nel groups showed higher weight gain (P <.01) when fed with V + B, with 1,44 and 1,32 kg/head/day respectively when comparing to the other diets: Can (A) = 1,30; Can (V) = 1,31; Nel (A) = 1,16 and Nel (V) = 1,20 kg/head/day. The diet using V + B has also showed a tendency (.05
Resumo:
The authors studied linear alterations processed on copper-aluminum casten MOD blocks, obtained from two expansion techniques (termic and hygroscopic by immersion). UNITERMS: Investment expansion. Thermic expansion. Hygroscopic expansion. Casten Technique.
Resumo:
It was evaluated the castability of four copper-aluminium alloy according the melting casting method used. The specimens were made using polyester mesh screen, with 11 x 11 filaments of 0.26 mm thick, fixed along of two adjacent edges in wax bar, with the sprue attached at their junction. The alloys were in an electrical casting machine and a centrifugal casting machine with an air/gas torch. The castability values were obtained by the percentage of completed segments of the resulting cast alloy screen. It was verified that the use of the electrical casting machine produced higher castability values to the copper-aluminium alloys than those produced by a centrifugal casting machine with an air/gas torch.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The objective of this work was to evaluate the nutritive value of pigeon pea meal (PPM) with methionine substituting soybean meal (SM) in diets for 1-28 day-old broiler chicks. The experimental design was that of random blocks, in a 3 × 3 factorial scheme with three substitution levels - 15,30 and 45% - and three methionine supplementation levels in relation to the requirements, that is: 100, 66 and 33%, with four repetitions. It was found that PPM treated for 20 minutes at 100°C substituted up to 30% of the SM, even without methionine supplementation, in relation to liveweight (p<0.01), to food conversion and to the efficiency of utilization of metabolizable energy and to protein (p<0.05). At the 66% level of methionine supplementation, the same results as for these parameters were obtained at all of the levels of substitution of SM by PPM. The 30% or 45% substitution of SM protein by that of PPM affected (p<0.01) the efficiency of methionine utilization. The sulphur amino acid utilization efficiency was affected (p<0.01) beginning at 66% methionine supplementation in the diets.
Resumo:
This job aim has been to study the aqueous corrosion of the 7xxx heattreatable aluminium alloys, used in the aeronautical industry. The 7010, 7050 and 7475 alloys, have been supplied in the T7 condition and submitted to the annealed and aging thermal treatments of in order to study their behaviours front to corrosion in 5% NaCl pH 6,0, air-saturated and deaerated solutions. The electrochemical study has been accomplished through potential measures in open circuit, potentiodynamic polarisation curves and electrochemical impedance spectroscopy (EIS). The aged alloy resulted to be the most resistant to corrosion and annealed the less resistant ones. In spite of it they have different chemical compositions, in each mean, the alloy with the same thermal treatment has behaved in a similar way. In aerated solution, the process is controlled by oxygen diffusion and in oxygen absence for dissolution through a film. Hardness and mass loss measures, after corrosion test, have supported this research.
Resumo:
The 2024-T3 and 7050-T7 aluminium alloys electrochemical behavior has been studied in NaCl 5% neutral solutions and 0,1M concentration containing NO 3 - or NO 2 -. The current job supports corrosion research on aluminium alloys used in aeronautic industry. Open circuit potential, polarisation curves and electrochemical impedance spectroscopy techniques have been used. In chloride solutions, alloys corrosion takes place through a pitting mechanism. Added anions to aerated solutions do not possess inhibition effect. In deaerated solutions, nitrite has diminished anodic dissolution rate, probably by incorporating this anion in the oxide and/or hydroxide film.
Resumo:
The aim of this work was to evaluate the effects of aluminum on the growth of Eucalyptus shoots cultivated in vitro through nutrient and total soluble protein content. The trial had a totally randomized design with four treatments and four replicates. The treatments were: 0.0; 0.25; 0.5 and 1.0 mM of AlCl 3.6H 2O. Shoots without roots of a Eucalyptus grandis x E urophylla clone were used for the in vitro culture. Evaluations were made on the 4th, 8th, 12th, 16th, 20th, 24th and 28th day of culture. The Al addition to the culture media reduced mainly Ca, P and K availability and absorptions by the shoots. The cellular metabolism was affected, conducted to morphological alterations in shoots (browning, mass calluses formation and shoots not friable), dry matter increased and a decreased in total protein soluble.
Resumo:
This paper is aiming to evaluate the effects of different levels of the aluminum on the growth of the Eucalyptus grandis x E. urophylla shoots cultivated in vitro. Evaluations were carried out on pH and chemicals modifications of the culture medium by Geochem program, polyamines contents (putrescine, espermidine e espermine) and acid phosphatase ativity on the shoots. The trial had a totally randomized design with four treatments and four replicates. The treatments were: 0.0, 6.75,13.50 and 27 mg.L -1 of AlCl 3.6H 2. Evaluations were carried out on the 4th, 8th, 12th, 16th, 20th, 24th and 28th day of culture. The addition of the aluminium, in all concentrations, affected the culture medium ionic equilibrium, the morphology of the shoots, reduced the pH on the medium, induced an increase in polyamines content and higher acid phosphatase activity.
Resumo:
Incluye Bibliografía
Resumo:
Objective: To analyze the reasons for replacing amalgam and composite resin restorations of patients treated at the Integrated Clinic Discipline of the Dental School of Araçatuba (UNESP), SP, Brazil. Method: After examining the patients for data collection to obtain a diagnosis, the treatment plan was outlined using a clinical form containing the restorations to be replaced, the reasons for replacing, the restorative material of choice and the number of restored surfaces. Next, all restorations indicated for replacement were examined as to their real need of replacement by 5 calibrated examiners taking into account the theorical concepts on the proposed criteria for the need of replacing or not. The analyzed period comprised 5 years (2001 to 2005). The criteria adopted for replacement were attached to the data collecting form in order to standardize the analysis of the restorations. Results: 856 patients were treated within the studied period and 753 needed restoration replacement. The main reasons for replacing amalgam restorations were defective marginal adaptation (40.9%), recurent caries (24.1%) and deficient anatomical form (15.4%). The main reasons for replacing resin restorations were esthetics (31.4%), defective marginal adaptation (29.2%) and recurent caries (20.7%). Conclusion: In spite of the little clinical experience of the studied population (undergraduate students), the reasons for replacing restorations were in accordance with the literature, having estehtics as the main reason for the replacement of composite resin restorations and defective marginal adaptation for amalgam restorations.