Modelling the structure of latexin-carboxypeptidase A complex based on chemical cross-linking and molecular docking

We have determined the three-dimensional structure of the protein complex between latexin and carboxypeptidase A using a combination of chemical cross-linking, mass spectrometry and molecular docking. The locations of three intermolecular cross-links were identified using mass spectrometry and these constraints were used in combination with a speed-optimised docking algorithm allowing us to evaluate more than 3 x 10(11) possible conformations. While cross-links represent only limited structural constraints, the combination of only three experimental cross-links with very basic molecular docking was sufficient to determine the complex structure. The crystal structure of the complex between latexin and carboxypeptidase A4 determined recently allowed us to assess the success of this structure determination approach. Our structure was shown to be within 4 angstrom r.m.s. deviation of C alpha atoms of the crystal structure. The study demonstrates that cross-linking in combination with mass spectrometry can lead to efficient and accurate structural modelling of protein complexes.

Modelling pre-clearing vegetation distribution using GIS-integrated statistical, ecological and data models: A case study from the wet tropics of Northeastern Australia

Traditional vegetation mapping methods use high cost, labour-intensive aerial photography interpretation. This approach can be subjective and is limited by factors such as the extent of remnant vegetation, and the differing scale and quality of aerial photography over time. An alternative approach is proposed which integrates a data model, a statistical model and an ecological model using sophisticated Geographic Information Systems (GIS) techniques and rule-based systems to support fine-scale vegetation community modelling. This approach is based on a more realistic representation of vegetation patterns with transitional gradients from one vegetation community to another. Arbitrary, though often unrealistic, sharp boundaries can be imposed on the model by the application of statistical methods. This GIS-integrated multivariate approach is applied to the problem of vegetation mapping in the complex vegetation communities of the Innisfail Lowlands in the Wet Tropics bioregion of Northeastern Australia. The paper presents the full cycle of this vegetation modelling approach including sampling sites, variable selection, model selection, model implementation, internal model assessment, model prediction assessments, models integration of discrete vegetation community models to generate a composite pre-clearing vegetation map, independent data set model validation and model prediction's scale assessments. An accurate pre-clearing vegetation map of the Innisfail Lowlands was generated (0.83r(2)) through GIS integration of 28 separate statistical models. This modelling approach has good potential for wider application, including provision of. vital information for conservation planning and management; a scientific basis for rehabilitation of disturbed and cleared areas; a viable method for the production of adequate vegetation maps for conservation and forestry planning of poorly-studied areas. (c) 2006 Elsevier B.V. All rights reserved.

Data flow and validation in workflow modelling

A complete workflow specification requires careful integration of many different process characteristics. Decisions must be made as to the definitions of individual activities, their scope, the order of execution that maintains the overall business process logic, the rules governing the discipline of work list scheduling to performers, identification of time constraints and more. The goal of this paper is to address an important issue in workflows modelling and specification, which is data flow, its modelling, specification and validation. Researchers have neglected this dimension of process analysis for some time, mainly focussing on structural considerations with limited verification checks. In this paper, we identify and justify the importance of data modelling in overall workflows specification and verification. We illustrate and define several potential data flow problems that, if not detected prior to workflow deployment may prevent the process from correct execution, execute process on inconsistent data or even lead to process suspension. A discussion on essential requirements of the workflow data model in order to support data validation is also given..

Modellazione strutturale di edifici storici in muratura e misti: valutazioni comparate e criteri operativi

L’obiettivo della presente tesi è evidenziare l’importanza dell’approccio critico alla valutazione della vulnerabilità sismica di edifici in muratura e misti Il contributo della tesi sottolinea i diversi risultati ottenuti nella modellazione di tre edifici esistenti ed uno ipotetico usando due diversi programmi basati sul modello del telaio equivalente. La modellazione delle diverse ipotesi di vincolamento ed estensione delle zone rigide ha richiesto la formulazione di quattro modelli di calcolo in Aedes PCM ed un modello in 3muri. I dati ottenuti sono stati confrontati, inoltre, con l’analisi semplificata speditiva per la valutazione della vulnerabilità a scala territoriale prevista nelle “Linee Guida per la valutazione e riduzione del rischio sismico del Patrimonio Culturale”. Si può notare che i valori ottenuti sono piuttosto diversi e che la variabilità aumenta nel caso di edifici non regolari, inoltre le evidenze legate ai danni realmente rilevati sugli edifici mostrano un profondo iato tra la previsione di danno ottenuta tramite calcolatore e le lesioni rilevate; questo costituisce un campanello d’allarme nei confronti di un approccio acritico nei confronti del mero dato numerico ed un richiamo all’importanza del processo conoscitivo. I casi di studio analizzati sono stati scelti in funzione delle caratteristiche seguenti: il primo è una struttura semplice e simmetrica nelle due direzioni che ha avuto la funzione di permettere di testare in modo controllato le ipotesi di base. Gli altri sono edifici reali: il Padiglione Morselli è un edificio in muratura a pianta a forma di C, regolare in pianta ed in elevazione solamente per quanto concerne la direzione y: questo ha permesso di raffrontare il diverso comportamento dei modelli di calcolo nelle sue direzioni; il liceo Marconi è un edificio misto in cui elementi in conglomerato cementizio armato affiancano le pareti portanti in muratura, che presenta un piano di copertura piuttosto irregolare; il Corpo 4 dell’Ospedale di Castelfranco Emilia è un edificio in muratura, a pianta regolare che presenta le medesime irregolarità nel piano sommitale del precedente. I dati ottenuti hanno dimostrato un buon accordo per la quantificazione dell’indice di sicurezza per i modelli regolari e semplici con uno scarto di circa il 30% mentre il delta si incrementa per le strutture irregolari, in particolare quando le pareti portanti in muratura vengono sostituite da elementi puntuali nei piani di copertura arrivando a valori massimi del 60%. I confronti sono stati estesi per le tre strutture anche alla modellazione proposta dalle Linee Guida per la valutazione dell’indice di sicurezza sismica a scala territoriale LV1 mostrando differenze nell’ordine del 30% per il Padiglione Morselli e del 50% per il Liceo Marconi; il metodo semplificato risulta correttamente cautelativo. È, quindi, possibile affermare che tanto più gli edifici si mostrano regolari in riferimento a masse e rigidezze, tanto più la modellazione a telaio equivalente restituisce valori in accordo tra i programmi e di più immediata comprensione. Questa evidenza può essere estesa ad altri casi reali divenendo un vero e proprio criterio operativo che consiglia la suddivisione degli edifici esistenti in muratura, solitamente molto complessi poiché frutto di successive stratificazioni, in parti più semplici, ricorrendo alle informazioni acquisite attraverso il percorso della conoscenza che diviene in questo modo uno strumento utile e vitale. La complessità dell’edificato storico deve necessariamente essere approcciata in una maniera più semplice identificando sub unità regolari per percorso dei carichi, epoca e tecnologia costruttiva e comportamento strutturale dimostrato nel corso del tempo che siano più semplici da studiare. Una chiara comprensione del comportamento delle strutture permette di agire mediante interventi puntuali e meno invasivi, rispettosi dell’esistente riconducendo, ancora una volta, l’intervento di consolidamento ai principi propri del restauro che includono i principi di minimo intervento, di riconoscibilità dello stesso, di rispetto dei materiali esistenti e l’uso di nuovi compatibili con i precedenti. Il percorso della conoscenza diviene in questo modo la chiave per liberare la complessità degli edifici storici esistenti trasformando un mero tecnicismo in una concreta operazione culturale . Il presente percorso di dottorato è stato svolto in collaborazione tra l’Università di Parma, DICATeA e lo Studio di Ingegneria Melegari mediante un percorso di Apprendistato in Alta Formazione e Ricerca.

Modelling foreign direct investment in China

This thesis consists of three empirical and one theoretical studies. While China has received an increasing amount of foreign direct investment (FDI) and become the second largest host country for FDI in recent years, the absence of comprehensive studies on FDI inflows into this country drives this research. In the first study, an econometric model is developed to analyse the economic, political, cultural and geographic determinants of both pledged and realised FDI in China. The results of this study suggest that China's relatively cheaper labour force, high degree of international integration with the outside world (represented by its exports and imports) and bilateral exchange rates are the important economic determinants of both pledged FDI and realised FDI in China. The second study analyses the regional distribution of both pledged and realised FDI within China. The econometric properties of the panel data set are examined using a standardised 't-bar' test. The empirical results indicate that provinces with higher level of international trade, lower wage rates, more R&D manpower, more preferential policies and closer ethnic links with overseas Chinese attract relatively more FDI. The third study constructs a dynamic equilibrium model to study the interactions among FDI, knowledge spillovers and long run economic growth in a developing country. The ideas of endogenous product cycles and trade-related international knowledge spillovers are modified and extended to FDI. The major conclusion is that, in the presence of FDI, economic growth is determined by the stock of human capital, the subjective discount rate and knowledge gap, while unskilled labour can not sustain growth. In the fourth study, the role of FDI in the growth process of the Chinese economy is investigated by using a panel of data for 27 provinces across China between 1986 and 1995. In addition to FDI, domestic R&D expenditure, international trade and human capital are added to the standard convergence regressions to control for different structural characteristics in each province. The empirical results support endogenous innovation growth theory in which regional per capita income can converge given technological diffusion, transfer and imitation.

Graphical modelling for brain connectivity via partial coherence

Spectral and coherence methodologies are ubiquitous for the analysis of multiple time series. Partial coherence analysis may be used to try to determine graphical models for brain functional connectivity. The outcome of such an analysis may be considerably influenced by factors such as the degree of spectral smoothing, line and interference removal, matrix inversion stabilization and the suppression of effects caused by side-lobe leakage, the combination of results from different epochs and people, and multiple hypothesis testing. This paper examines each of these steps in turn and provides a possible path which produces relatively ‘clean’ connectivity plots. In particular we show how spectral matrix diagonal up-weighting can simultaneously stabilize spectral matrix inversion and reduce effects caused by side-lobe leakage, and use the stepdown multiple hypothesis test procedure to help formulate an interaction strength.

Structural studies on antifolate drugs

Single crystal X-ray structure determinations are reported for eleven compounds all of which are either biologically active or potentially biologically important. The compounds fall into two distinct classes:- 1. Substituted diaminopyrimidines 2. Substituted aminopyrimidinones The first class of compounds were all selected on the basis of their common diaminopyrimidine nucleus which has been demonstrated to be a vital requirement for antifolate activity. They may all be described as non-classical or small molecule lipophilic dihydrofolate reductase (DHFR) inhibitors, as opposed to the classical folate analogues, having the ability to cross the blood-brain barrier, enter cells via a rapid passive diffusion process, and achieve high intracellular concentrations. Thus they are an excellent choice in the search for crystallography in the solid state, providing geometrical and distance data not available from any other analytical techniques to date; supporting and enhancing data obtained in the lower resolution studies of protein crystallography. The biological importance of these compounds is discussed and an attempt is made to relate/predict their pharmacological activity to observed structural features in the crystalline environment. Special attention is focussed on hydrogen bonding, confirmational flexibility and hydrophobicity of substituents; each of which appear to make contributions to tight binding in the enzyme active site. Chapter 9 describes the use of data from the literature and the solid state modelling of an observed enzyme-substrate interaction in an attempt to define it more accurately in terms of its geometric flexibility. Of the second class, one compound (ABPP) is reported; studies in two different crystal forms. In demonstrating both antiviral and high interferon inducing activity it is possible that this compound could be useful against cancer and also viral infections.

Similarity between class A and class B G-protein-coupled receptors exemplified through calcitonin gene-related peptide receptor modelling and mutagenesis studies

Modelling class B G-protein-coupled receptors (GPCRs) using class A GPCR structural templates is difficult due to lack of homology. The plant GPCR, GCR1, has homology to both class A and class B GPCRs. We have used this to generate a class A-class B alignment, and by incorporating maximum lagged correlation of entropy and hydrophobicity into a consensus score, we have been able to align receptor transmembrane regions. We have applied this analysis to generate active and inactive homology models of the class B calcitonin gene-related peptide (CGRP) receptor, and have supported it with site-directed mutagenesis data using 122 CGRP receptor residues and 144 published mutagenesis results on other class B GPCRs. The variation of sequence variability with structure, the analysis of polarity violations, the alignment of group-conserved residues and the mutagenesis results at 27 key positions were particularly informative in distinguishing between the proposed and plausible alternative alignments. Furthermore, we have been able to associate the key molecular features of the class B GPCR signalling machinery with their class A counterparts for the first time. These include the [K/R]KLH motif in intracellular loop 1, [I/L]xxxL and KxxK at the intracellular end of TM5 and TM6, the NPXXY/VAVLY motif on TM7 and small group-conserved residues in TM1, TM2, TM3 and TM7. The equivalent of the class A DRY motif is proposed to involve Arg(2.39), His(2.43) and Glu(3.46), which makes a polar lock with T(6.37). These alignments and models provide useful tools for understanding class B GPCR function.

Deindustrialisation:lessons from the structural outcomes of post-Communist transition

Theoretical and empirical studies show that deindustrialisation, broadly observed in developed countries, is an inherent part of the economic development pattern. However, post-communist countries, while being only middle-income economies, have also experienced deindustrialisation. Building on the model developed by Rowthorn and Wells (1987) we explain this phenomenon and show that there is a strong negative relationship between the magnitude of deindustrialisation and the efficiency and consistency of market reforms. We also demonstrate that reforms of the agricultural sector play a significant role in placing a transition country on a development path that guarantees convergence to EU employment structures.

Deindustrialisation and structural change during the post-Communist transition

The aim of this paper is to model the evolution of employment structure in post-communist economies in the broader context of deindustrialisation. The paper builds on the model of structural change developed by Rowthorn and Wells (1987). We show that the starting point of high industry sector share in total employment and its direct fall when productivity of sectors changes in favour of services can be explained in terms of this framework. Moreover, the model can also describe the phenomenon of a further expansion of the agriculture, observed in countries classified as "less consistent" in the reforms implementation. Hence, we distinguish two development paths, the efficient one, called "horizontal", and the inefficient one called "vertical". We illustrate it with empirical data, using alternative measures of structural change and patterns of structural evolutions during transition. Finally, we discuss the link between the EBRD indicators of reforms and structural change. We show that the "quality" of reforms, not the initial GDP level determines a country's development path.

The definition, theoretical modelling and empirical research of front-line service employee corporate identity within a UK national grocery retailer:determining the FLE corporate brand identification construct

Over the past forty years the corporate identity literature has developed to a point of maturity where it currently contains many definitions and models of the corporate identity construct at the organisational level. The literature has evolved by developing models of corporate identity or in considering corporate identity in relation to new and developing themes, e.g. corporate social responsibility. It has evolved into a multidisciplinary domain recently incorporating constructs from other literature to further its development. However, the literature has a number of limitations. It remains that an overarching and universally accepted definition of corporate identity is elusive, potentially leaving the construct with a lack of clear definition. Only a few corporate identity definitions and models, at the corporate level, have been empirically tested. The corporate identity construct is overwhelmingly defined and theoretically constructed at the corporate level, leaving the literature without a detailed understanding of its influence at an individual stakeholder level. Front-line service employees (FLEs), form a component in a number of corporate identity models developed at the organisational level. FLEs deliver the services of an organisation to its customers, as well as represent the organisation by communicating and transporting its core defining characteristics to customers through continual customer contact and interaction. This person-to-person contact between an FLE and the customer is termed a service encounter, where service encounters influence a customer’s perception of both the service delivered and the associated level of service quality. Therefore this study for the first time defines, theoretically models and empirically tests corporate identity at the individual FLE level, termed FLE corporate identity. The study uses the services marketing literature to characterise an FLE’s operating environment, arriving at five potential dimensions to the FLE corporate identity construct. These are scrutinised against existing corporate identity definitions and models to arrive at a definition for the construct. In reviewing the corporate identity, services marketing, branding and organisational psychology literature, a theoretical model is developed for FLE corporate identity, which is empirically and quantitatively tested, with FLEs in seven stores of a major national retailer. Following rigorous construct reliability and validity testing, the 601 usable responses are used to estimate a confirmatory factor analysis and structural equation model for the study. The results for the individual hypotheses and the structural model are very encouraging, as they fit the data well and support a definition of FLE corporate identity. This study makes contributions to the branding, services marketing and organisational psychology literature, but its principal contribution is to extend the corporate identity literature into a new area of discourse and research, that of FLE corporate identity

Modelling short crack growth behaviour in nickel-base superalloys

This paper provides a description of the features and mechanisms of facetted short crack growth in Ni-base superalloys, and briefly reviews existing short crack growth models in terms of their application to Ni-base alloys. The concept of “soft barriers” is introduced to produce a new two-phase model for local microstructural effects on short crack growth in Waspaloy. This is derived from detailed observations of crack growth through individual grains. The model differs from all previous approaches in highlighting the importance of crack path perturbations within grains. Potential applications of the model in alloy development are discussed.

Multivariate FIAPARCH modelling of financial markets with dynamic correlations in times of crisis

This paper applies the vector AR-DCC-FIAPARCH model to eight national stock market indices' daily returns from 1988 to 2010, taking into account the structural breaks of each time series linked to the Asian and the recent Global financial crisis. We find significant cross effects, as well as long range volatility dependence, asymmetric volatility response to positive and negative shocks, and the power of returns that best fits the volatility pattern. One of the main findings of the model analysis is the higher dynamic correlations of the stock markets after a crisis event, which means increased contagion effects between the markets. The fact that during the crisis the conditional correlations remain on a high level indicates a continuous herding behaviour during these periods of increased market volatility. Finally, during the recent Global financial crisis the correlations remain on a much higher level than during the Asian financial crisis.