Precision Agriculture without borders: Practical issues and improvements in farmland coverage with aerial vehicles.

This work presents a solution for the aerial coverage of a field by using a fleet of aerial vehicles. The use of Unmanned Aerial Vehicles allows to obtain high resolution mosaics to be used in Precision Agriculture techniques. This report is focus on providing a solution for the full simultaneous coverage problem taking into account restrictions as the required spatial resolution and overlap while maintaining similar light conditions and safety operation of the drones. Results obtained from real field tests are finally reported

A waypoint-based mission planner for a farmland coverage with an aerial robot - a precision farming tool

Remote sensing (RS) with aerial robots is becoming more usual in every day time in Precision Agriculture (PA) practices, do to their advantages over conventional methods. Usually, available commercial platforms providing off-the-shelf waypoint navigation are adopted to perform visual surveys over crop fields, with the purpose to acquire specific image samples. The way in which a waypoint list is computed and dispatched to the aerial robot when mapping non empty agricultural workspaces has not been yet discussed. In this paper we propose an offline mission planner approach that computes an efficient coverage path subject to some constraints by decomposing the environment approximately into cells. Therefore, the aim of this work is contributing with a feasible waypoints-based tool to support PA practices

Techniques for Area Discretization and Coverage in Aerial Photography for Precision Agriculture employing mini quad-rotors

Remote sensed imagery acquired with mini aerial vehicles, in conjunction with GIS technology enable a meticulous analysis from surveyed agricultural sites. This paper sums up the ongoing work in area discretization and coverage with mini quad-­?rotors applied to Precision Agriculture practices under the project RHEA.

An image segmentation based on a genetic algorithm for determining soil coverage by crop residues

Determination of the soil coverage by crop residues after ploughing is a fundamental element of Conservation Agriculture. This paper presents the application of genetic algorithms employed during the fine tuning of the segmentation process of a digital image with the aim of automatically quantifying the residue coverage. In other words, the objective is to achieve a segmentation that would permit the discrimination of the texture of the residue so that the output of the segmentation process is a binary image in which residue zones are isolated from the rest. The RGB images used come from a sample of images in which sections of terrain were photographed with a conventional camera positioned in zenith orientation atop a tripod. The images were taken outdoors under uncontrolled lighting conditions. Up to 92% similarity was achieved between the images obtained by the segmentation process proposed in this paper and the templates made by an elaborate manual tracing process. In addition to the proposed segmentation procedure and the fine tuning procedure that was developed, a global quantification of the soil coverage by residues for the sampled area was achieved that differed by only 0.85% from the quantification obtained using template images. Moreover, the proposed method does not depend on the type of residue present in the image. The study was conducted at the experimental farm “El Encín” in Alcalá de Henares (Madrid, Spain).

Aerial Remote Sensing in Agriculture: A Practical Approach to Area Coverage and Path Planning for Fleets of Mini Aerial Robots

In this paper, a system that allows applying precision agriculture techniques is described. The application is based on the deployment of a team of unmanned aerial vehicles that are able to take georeferenced pictures in order to create a full map by applying mosaicking procedures for postprocessing. The main contribution of this work is practical experimentation with an integrated tool. Contributions in different fields are also reported. Among them is a new one-phase automatic task partitioning manager, which is based on negotiation among the aerial vehicles, considering their state and capabilities. Once the individual tasks are assigned, an optimal path planning algorithm is in charge of determining the best path for each vehicle to follow. Also, a robust flight control based on the use of a control law that improves the maneuverability of the quadrotors has been designed. A set of field tests was performed in order to analyze all the capabilities of the system, from task negotiations to final performance. These experiments also allowed testing control robustness under different weather conditions.

Low-density InAs QDs with subcritical coverage obtained by conversion of In nanocrystals

We report growth of InAs/GaAs quantum dots (QDs) by molecular beam epitaxy with low density of 2 μm−2 by conversion of In nanocrystals deposited at low temperatures. The total amount of InAs used is about one monolayer, which is less than the critical thickness for conventional Stranski–Krastanov QDs. We also demonstrate the importance of the starting surface reconstruction for obtaining uniform QDs. The QD emission wavelength is easily tunable upon post-growth annealing with no wetting layer signal visible for short anneals. Microphotoluminescence measurements reveal well separated and sharp emission lines of individual QDs.

Procedure for verification of sound source coverage over façades according to the International Standard ISO 140-5

This paper presents a new verification procedure for sound source coverage according to ISO 140?5 requirements. The ISO 140?5 standard applies to the measurement of façade insulation and requires a sound source able to achieve a sufficiently uniform sound field in free field conditions on the façade under study. The proposed method involves the electroacoustic characterisation of the sound source in laboratory free field conditions (anechoic room) and the subsequent prediction by computer simulation of the sound free field radiated on a rectangular surface equal in size to the façade being measured. The loudspeaker is characterised in an anechoic room under laboratory controlled conditions, carefully measuring directivity, and then a computer model is designed to calculate the acoustic free field coverage for different loudspeaker positions and façade sizes. For each sound source position, the method provides the maximum direct acoustic level differences on a façade specimen and therefore determines whether the loudspeaker verifies the maximum allowed level difference of 5 dB (or 10 dB for façade dimensions greater than 5 m) required by the ISO standard. Additionally, the maximum horizontal dimension of the façade meeting the standard is calculated and provided for each sound source position, both with the 5 dB and 10 dB criteria. In the last section of the paper, the proposed procedure is compared with another method used by the authors in the past to achieve the same purpose: in situ outdoor measurements attempting to recreate free field conditions. From this comparison, it is concluded that the proposed method is able to reproduce the actual measurements with high accuracy, for example, the ground reflection effect, at least at low frequencies, which is difficult to avoid in the outdoor measurement method, and it is fully eliminated with the proposed method to achieve the free field requisite.

In vitro ruminal fermentation of diets containing wheat straw and date pits as forage.

The pH, VFA concentration, total gas and met hane production were determined in the rumen of four Sicilo- Sarde rams fitted with permanent canulas. Rams received a ration that included 1.5 kg DM of oat hay and were supplemented with one of four concentrates: CC (10% barley, 43.3% corn, 25% wheat bran, 17.7% soybean meal, 4% sheep Vitamin and Mineral Mixture (VMM)), SC (66% white sorghum, 30% faba, 4% sheep VMM); TC (71% triticale, 18% faba, 7%, soybean meal, 4% VMM) or BC (71.5% barley, 17.5% faba, 7% soybean meal and 4% VMM). 50 ml samples were taken before, 2, 5 and 8 hours after the morning meal. Total gas was determined on rumen content before the morning meal. The rumen pH was statistically different (P<0.05) before and 2 hours after the morning meal among concentrates feed. It was in favour of TC and BC (P<0.05) concentrates but was comparable at the end of the day. The concentration of VFA was significantly higher (P<0.05) for diets TC and BC following the meal and became comparable among concentrates thereafter. The proportion of acetate and butyrate acids evolved in the same way during the day regardless of the regimen. The total volu me of gas was different (P<0.05) among diets, the BC showed the highest value (87.00±17.29 ml) while the lowest value was found in the TC concentrate (56.58±13.06 ml). The CH4 production for the BC was significantly different (P<0.05) from that of TC. Quantities produced by the CC and SC were similar (22.08±4.18vs . 21.16±3.21).

Assessment of insurance coverage and claims in rainfall related risks in processing tomato in Western Spain

An extension of guarantees related to rainfall-related risks in the insurance of processing tomato crops has been accompanied with a large increase in claims in Western Spain, suggesting that damages may have been underestimated in previous years. A database was built by linking agricultural insurance records, meteorological data from local weather stations, and topographic data. The risk of rainfall-related damages in processing tomato in the Extremenian Guadiana river basin (W Spain) was studied using a logistic model. Risks during the growth of the crop and at harvesting were modelled separately. First, the risk related to rainfall was modelled as a function of meteorological, terrain and management variables. The resulting models were used to identify the variables responsible for rainfall-related damages, with a view to assess the potential impact of extending insurance coverage, and to develop an index to express the suitability of the cropping system for insurance. The analyses reveal that damages at different stages of crop development correspond to different hazards. The geographic dependence of the risk influences the scale at which the model might have validity, which together with the year dependency, the possibility of implementing index based insurances is questioned.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Assessment of insurance coverage and claims in rainfall related risksin processing tomato in Western Spain

An extension of guarantees related to rainfall-related risks in the insurance of processing tomato crops hasbeen accompanied with a large increase in claims in Western Spain, suggesting that damages may havebeen underestimated in previous years. A database was built by linking agricultural insurance records,meteorological data from local weather stations, and topographic data. The risk of rainfall-related dam-ages in processing tomato in the Extremenian Guadiana river basin (W Spain) was studied using a logisticmodel. Risks during the growth of the crop and at harvesting were modelled separately. First, the riskrelated to rainfall was modelled as a function of meteorological, terrain and management variables. Theresulting models were used to identify the variables responsible for rainfall-related damages, with a viewto assess the potential impact of extending insurance coverage, and to develop an index to express thesuitability of the cropping system for insurance. The analyses reveal that damages at different stages ofcrop development correspond to different hazards. The geographic dependence of the risk influences the scale at which the model might have validity, which together with the year dependency, hampers the possibilityof implementing index based insurances is questioned.

Multiwavelength study of quiescent states of MrK 421 with unprecedented hard x-Ray coverage provided by NuStar in 2013

We present coordinated multiwavelength observations of the bright, nearby BL Lacertae object Mrk 421 taken in 2013 January–March, involving GASP-WEBT, Swift, NuSTAR, Fermi-LAT, MAGIC, VERITAS, and other collaborations and instruments, providing data from radio to very high energy (VHE) γ-ray bands. NuSTAR yielded previously unattainable sensitivity in the 3–79 keV range, revealing that the spectrum softens when the source is dimmer until the X-ray spectral shape saturates into a steep G » 3 power law, with no evidence for an exponential cutoff or additional hard components up "aprox" 80keV. For the first time, we observed both the synchrotron and the inverse-Compton peaks of the spectral energy distribution (SED) simultaneously shifted to frequencies below the typical quiescent state by an order of magnitude. The fractional variability as a function of photon energy shows a double-bump structure that relates to the two bumps of the broadband SED. In each bump, the variability increases with energy, which, in the framework of the synchrotron self-Compton model, implies that the electrons with higher energies are more variable. The measured multi band variability, the significant X-ray-toVHE correlation down to some of the lowest fluxes ever observed in both bands, the lack of correlation between optical/UV and X-ray flux, the low degree of polarization and its significant (random) variations, the short estimated electron cooling time, and the significantly longer variability timescale observed in the NuSTAR light curves point toward in situ electron acceleration and suggest that there are multiple compact regions contributing to the broadband emission of Mrk 421 during low-activity states.

Genetically Modified Food in the US and the UK: proponents, dissenters and media coverage

This research is a qualitative study examining the communication surrounding the issue of genetically modified food in the UK and the UK from October, 2011 through September, 2012. Material from biotechnology industry organizations, industry-funded non-profits, groups campaigning against the continued use of the technology, and mainstream media coverage of the issue in both countries during this time was examined using thematic analysis. The issue is analyzed through the lenses of Herman and Chomsky's propaganda model, agenda building and framing theory. The research finds support for agenda building as well as a modernized understanding of the propaganda model, which the researcher argues are complementary theories.

Knowledge and attitudes of Spanish adolescent girls towards human papillomavirus infection: where to intervene to improve vaccination coverage

Background: HPV vaccine coverage is far from ideal in Valencia, Spain, and this could be partially related to the low knowledge about the disease and the vaccine, therefore we assessed these, as well as the attitude towards vaccination in adolescent girls, and tried to identify independently associated factors that could potentially be modified by an intervention in order to increase vaccine coverage. Methods: A cross sectional study was conducted in a random selection of schools of the Spanish region of Valencia. We asked mothers of 1278 girls, who should have been vaccinated in the 2011 campaign, for informed consent. Those that accepted their daughters’ participation, a questionnaire regarding the Knowledge of HPV infection and vaccine was passed to the girls in the school. Results: 833 mothers (65.1%) accepted participation. All their daughters’ responded the questionnaire. Of those, 89.9% had heard about HPV and they associated it to cervical cancer. Only 14% related it to other problems like genital warts. The knowledge score of the girls who had heard about HPV was 6.1/10. Knowledge was unrelated to the number of contacts with the health system (Pediatrician or nurse), and positively correlated with the discussions with classmates about the vaccine. Adolescents Spanish in origin or with an older sister vaccinated, had higher punctuation. 67% of the girls thought that the vaccine prevented cancer, and 22.6% felt that although prevented cancer the vaccine had important safety problems. 6.4% of the girls rejected the vaccine for safety problems or for not considering themselves at risk of infection. 71.5% of the girls had received at least one vaccine dose. Vaccinated girls scored higher knowledge (p = 0.05). Conclusion: Knowledge about HPV infection and vaccine was fair in adolescents of Valencia, and is independent to the number of contacts with the health system, it is however correlated to the conversations about the vaccine with their peers and the vaccination status. An action to improve HPV knowledge through health providers might increase vaccine coverage in the adolescents.