Editor web de conexiones para la creación visual de aplicaciones composicionales mediante mashup

A lo largo de este documento se describe el trabajo llevado a cabo para el logro de todos objetivos de este Trabajo Fin de Grado, el cual tiene como objetivo principal la mejora de la herramienta de edición de las conexiones internas de un mashup proporcionada actualmente por la plataforma web WireCloud. WireCloud es una plataforma web centrada en la construcción visual de mashups de aplicaciones a partir de la interconexión de pequeñas aplicaciones web denominadas widgets. Los principales inconvenientes presentes en el actual editor de conexiones que incluye esta plataforma afectan principalmente a sus usuarios con poca experiencia en diseño web. Estos usuarios tienen dificultades a la hora de interpretar el esquema de conexiones de un mashup ajeno y también, de crear el esquema de conexiones de un mashup propio. La mejora realizada supone un cambio en la metáfora utilizada para la creación de las conexiones, que ahora se organiza en torno a unidades conceptuales denominadas comportamientos que representan subconjuntos cohesionados de conexiones con significado (representando por si mismos comportamientos relevantes del mashup). Con este cambio se logra solventar los inconvenientes que presenta el actual sistema, principalmente la necesidad de crear (y visualizar) simultáneamente todas las conexiones requeridas por el mashup, lo cual supone que: a) es difícil identificar con qué propósito se ha creado cada conexión y qué relación guardan unas conexiones con otras. b) existe un riesgo de olvidar alguna conexión, fundamentalmente por ser difícil la interpretación del propósito de cada conexión y por la imposibilidad de identificar y nombrar conjuntos de conexiones que tienen un propósito determinado. Antes de implementar el código fuente se realizó un estudio pormenorizado de las tecnologías que actualmente utiliza WireCloud, además de un estudio en profundidad de la situación del anterior editor y de las nuevas características y ventajas buscadas en este nuevo editor. Con este último propósito se definieron varios casos de estudio que ayudaron a concretar qué se ha de entender por un comportamiento en el diseño de las conexiones de un mashup y también, ayudaron a definir la mejor organización visual del nuevo editor en torno al concepto de comportamiento. El resto del trabajo consistió en la implementación del nuevo editor y en la elaboración de toda la documentación relacionada: principalmente el manual de uso del nuevo editor que estará disponible como parte de la documentación online de WireCloud.---ABSTRACT---This document describes the work carried out for the achievement of all targets of this Final Project, which has as its main objective the improvement of the edition tool of the mashup’s internal connections that is currently provided by WireCloud. WireCloud is a web platform focused on building visual of web mashups from the interconnection of web applications called web widgets. The main drawbacks present in the current web editor of connections, includes on this platform, mainly affect to users with little experience in web design. These users have difficulties for interpreting the wiring diagram of any web mashup and also, creating the wiring diagram of an own web mashup. The improvement made a change in the metaphor used for creating connections, now managing a conceptual units called behaviors that represent subsets of meaningful connections. This change overcomes the drawbacks of the current system, mainly the need to create and display simultaneously all connections required by the web mashup, which means that: a) Difficultly identify what purpose is created each connection and how they relate to each other connections. b) There is the risk of forgetting some connection, mainly for being difficult to interpret the purpose of each connection and the inability to identify and name sets of connections that have a specific purpose. Before deploying the source code, the study of the technologies currently used WireCloud was performed, plus the study of the situation of the previous editor and new features and advantages searched for this new editor was performed too. For the latter purpose was defined several case studies that helped to specify what understood by behavior in the design of the connections of a web mashup and also that helped to define the best visual organization of the new behavior-oriented wiring editor. The rest of the work involved in implementing the new wiring web editor and in the preparation of all documentation related: mainly user manual for using the new wiring web editor that will be available as part of the WireCloud online documentation.

Global research alliance modelling platform (GRAMP): an open web platform for modelling greenhouse gas emissions from agro-ecosystems

Carbon (C) and nitrogen (N) process-based models are important tools for estimating and reporting greenhouse gas emissions and changes in soil C stocks. There is a need for continuous evaluation, development and adaptation of these models to improve scientific understanding, national inventories and assessment of mitigation options across the world. To date, much of the information needed to describe different processes like transpiration, photosynthesis, plant growth and maintenance, above and below ground carbon dynamics, decomposition and nitrogen mineralization. In ecosystem models remains inaccessible to the wider community, being stored within model computer source code, or held internally by modelling teams. Here we describe the Global Research Alliance Modelling Platform (GRAMP), a web-based modelling platform to link researchers with appropriate datasets, models and training material. It will provide access to model source code and an interactive platform for researchers to form a consensus on existing methods, and to synthesize new ideas, which will help to advance progress in this area. The platform will eventually support a variety of models, but to trial the platform and test the architecture and functionality, it was piloted with variants of the DNDC model. The intention is to form a worldwide collaborative network (a virtual laboratory) via an interactive website with access to models and best practice guidelines; appropriate datasets for testing, calibrating and evaluating models; on-line tutorials and links to modelling and data provider research groups, and their associated publications. A graphical user interface has been designed to view the model development tree and access all of the above functions.

NURBS-Based Geometry Parameterization for Aerodynamic Shape Optimization

La motivación de esta tesis es el desarrollo de una herramienta de optimización automática para la mejora del rendimiento de formas aerodinámicas enfocado en la industria aeronáutica. Este trabajo cubre varios aspectos esenciales, desde el empleo de Non-Uniform Rational B-Splines (NURBS), al cálculo de gradientes utilizando la metodología del adjunto continuo, el uso de b-splines volumétricas como parámetros de diseño, el tratamiento de la malla en las intersecciones, y no menos importante, la adaptación de los algoritmos de la dinámica de fluidos computacional (CFD) en arquitecturas hardware de alto paralelismo, como las tarjetas gráficas, para acelerar el proceso de optimización. La metodología adjunta ha posibilitado que los métodos de optimización basados en gradientes sean una alternativa prometedora para la mejora de la eficiencia aerodinámica de los aviones. La formulación del adjunto permite calcular los gradientes de una función de coste, como la resistencia aerodinámica o la sustentación, independientemente del número de variables de diseño, a un coste computacional equivalente a una simulación CFD. Sin embargo, existen problemas prácticos que han imposibilitado su aplicación en la industria, que se pueden resumir en: integrabilidad, rendimiento computacional y robustez de la solución adjunta. Este trabajo aborda estas contrariedades y las analiza en casos prácticos. Como resumen, las contribuciones de esta tesis son: • El uso de NURBS como variables de diseño en un bucle de automático de optimización, aplicado a la mejora del rendimiento aerodinámico de alas en régimen transónico. • El desarrollo de algoritmos de inversión de punto, para calcular las coordenadas paramétricas de las coordenadas espaciales, para ligar los vértices de malla a las NURBS. • El uso y validación de la formulación adjunta para el calculo de los gradientes, a partir de las sensibilidades de la solución adjunta, comparado con diferencias finitas. • Se ofrece una estrategia para utilizar la geometría CAD, en forma de parches NURBS, para tratar las intersecciones, como el ala-fuselaje. • No existen muchas alternativas de librerías NURBS viables. En este trabajo se ha desarrollado una librería, DOMINO NURBS, y se ofrece a la comunidad como código libre y abierto. • También se ha implementado un código CFD en tarjeta gráfica, para realizar una valoración de cómo se puede adaptar un código sobre malla no estructurada a arquitecturas paralelas. • Finalmente, se propone una metodología, basada en la función de Green, como una forma eficiente de paralelizar simulaciones numéricas. Esta tesis ha sido apoyada por las actividades realizadas por el Área de Dinámica da Fluidos del Instituto Nacional de Técnica Aeroespacial (INTA), a través de numerosos proyectos de financiación nacional: DOMINO, SIMUMAT, y CORESFMULAERO. También ha estado en consonancia con las actividades realizadas por el departamento de Métodos y Herramientas de Airbus España y con el grupo Investigación y Tecnología Aeronáutica Europeo (GARTEUR), AG/52. ABSTRACT The motivation of this work is the development of an automatic optimization strategy for large scale shape optimization problems that arise in the aeronautics industry to improve the aerodynamic performance; covering several aspects from the use of Non-Uniform Rational B-Splines (NURBS), the calculation of the gradients with the continuous adjoint formulation, the development of volumetric b-splines parameterization, mesh adaptation and intersection handling, to the adaptation of Computational Fluid Dynamics (CFD) algorithms to take advantage of highly parallel architectures in order to speed up the optimization process. With the development of the adjoint formulation, gradient-based methods for aerodynamic optimization become a promising approach to improve the aerodynamic performance of aircraft designs. The adjoint methodology allows the evaluation the gradients to all design variables of a cost function, such as drag or lift, at the equivalent cost of more or less one CFD simulation. However, some practical problems have been delaying its full implementation to the industry, which can be summarized as: integrability, computer performance, and adjoint robustness. This work tackles some of these issues and analyse them in well-known test cases. As summary, the contributions comprises: • The employment of NURBS as design variables in an automatic optimization loop for the improvement of the aerodynamic performance of aircraft wings in transonic regimen. • The development of point inversion algorithms to calculate the NURBS parametric coordinates from the space coordinates, to link with the computational grid vertex. • The use and validation of the adjoint formulation to calculate the gradients from the surface sensitivities in an automatic optimization loop and evaluate its reliability, compared with finite differences. • This work proposes some algorithms that take advantage of the underlying CAD geometry description, in the form of NURBS patches, to handle intersections and mesh adaptations. • There are not many usable libraries for NURBS available. In this work an open source library DOMINO NURBS has been developed and is offered to the community as free, open source code. • The implementation of a transonic CFD solver from scratch in a graphic card, for an assessment of the implementability of conventional CFD solvers for unstructured grids to highly parallel architectures. • Finally, this research proposes the use of the Green's function as an efficient paralellization scheme of numerical solvers. The presented work has been supported by the activities carried out at the Fluid Dynamics branch of the National Institute for Aerospace Technology (INTA) through national founding research projects: DOMINO, SIMUMAT, and CORESIMULAERO; in line with the activities carried out by the Methods and Tools and Flight Physics department at Airbus and the Group for Aeronautical Research and Technology in Europe (GARTEUR) action group AG/52.

A proposal for a model-based approach for adapting software configuration to runtime environments

Las metodologías de desarrollo ágiles han sufrido un gran auge en entornos industriales durante los últimos años debido a la rapidez y fiabilidad de los procesos de desarrollo que proponen. La filosofía DevOps y específicamente las metodologías derivadas de ella como Continuous Delivery o Continuous Deployment promueven la gestión completamente automatizada del ciclo de vida de las aplicaciones, desde el código fuente a las aplicaciones ejecutándose en entornos de producción. La automatización se ve como un medio para producir procesos repetibles, fiables y rápidos. Sin embargo, no todas las partes de las metodologías Continuous están completamente automatizadas. En particular, la gestión de la configuración de los parámetros de ejecución es un problema que ha sido acrecentado por la elasticidad y escalabilidad que proporcionan las tecnologías de computación en la nube. La mayoría de las herramientas de despliegue actuales pueden automatizar el despliegue de la configuración de parámetros de ejecución, pero no ofrecen soporte a la hora de fijar esos parámetros o de validar los ficheros que despliegan, principalmente debido al gran abanico de opciones de configuración y el hecho de que el valor de muchos de esos parámetros es fijado en base a preferencias expresadas por el usuario. Esto hecho hace que pueda parecer que cualquier solución al problema debe estar ajustada a una aplicación específica en lugar de ofrecer una solución general. Con el objetivo de solucionar este problema, propongo un modelo de configuración que puede ser inferido a partir de instancias de configuración existentes y que puede reflejar las preferencias de los usuarios para ser usado para facilitar los procesos de configuración. El modelo de configuración puede ser usado como la base de un proceso de configuración interactivo capaz de guiar a un operador humano a través de la configuración de una aplicación para su despliegue en un entorno determinado o para detectar cambios de configuración automáticamente y producir una configuración válida que se ajuste a esos cambios. Además, el modelo de configuración debería ser gestionado como si se tratase de cualquier otro artefacto software y debería ser incorporado a las prácticas de gestión habituales. Por eso también propongo un modelo de gestión de servicios que incluya información relativa a la configuración de parámetros de ejecución y que además es capaz de describir y gestionar propuestas arquitectónicas actuales tales como los arquitecturas de microservicios. ABSTRACT Agile development methodologies have risen in popularity within the industry in recent years due to the speed and reliability of the processes they propose. The DevOps philosophy and specifically the methodologies derived from it such as Continuous Delivery and Continuous Deployment push for a totally automated management of the application lifecycle, from the source code to the software running in production environment. Automation in this regard is used as a means to produce repeatable, reliable and fast processes. However, not all parts of the Continuous methodologies are completely automatized. In particular, management of runtime parameter configuration is a problem that has increased its impact in deployment process due to the scalability and elasticity provided by cloud technologies. Most deployment tools nowadays can automate the deployment of runtime parameter configuration, but they offer no support for parameter setting o configuration validation, as the range of different configuration options and the fact that the value of many of those parameters is based on user preference seems to imply that any solution to the problem will have to be tailored to a specific application. With the aim to solve this problem I propose a configuration model that can be inferred from existing configurations and reflect user preferences in order to ease the configuration process. The configuration model can be used as the base of an interactive configuration process capable of guiding a human operator through the configuration of an application for its deployment in a specific environment or to automatically detect configuration changes and produce valid runtime parameter configurations that take into account those changes. Additionally, the configuration model should be managed as any other software artefact and should be incorporated into current management practices. I also propose a service management model that includes the configuration information and that is able to describe and manage current architectural practices such as the microservices architecture.

Herramienta de medida y visualización de prestaciones basada en eventos para especificaciones RVC-CAL

Este proyecto fin de grado presenta dos herramientas, Papify y Papify-Viewer, para medir y visualizar, respectivamente, las prestaciones a bajo nivel de especificaciones RVC-CAL basándose en eventos hardware. RVC-CAL es un lenguaje de flujo de datos estandarizado por MPEG y utilizado para definir herramientas relacionadas con la codificación de vídeo. La estructura de los programas descritos en RVC-CAL se basa en unidades funcionales llamadas actores, que a su vez se subdividen en funciones o procedimientos llamados acciones. ORCC (Open RVC-CAL Compiler) es un compilador de código abierto que utiliza como entrada descripciones RVC-CAL y genera a partir de ellas código fuente en un lenguaje dado, como por ejemplo C. Internamente, el compilador ORCC se divide en tres etapas distinguibles: front-end, middle-end y back-end. La implementación de Papify consiste en modificar la etapa del back-end del compilador, encargada de la generación de código, de modo tal que los actores, al ser traducidos a lenguaje C, queden instrumentados con PAPI (Performance Application Programing Interface), una herramienta utilizada como interfaz a los registros contadores de rendimiento (PMC) de los procesadores. Además, también se modifica el front-end para permitir identificar cierto tipo de anotaciones en las descripciones RVC-CAL, utilizadas para que el diseñador pueda indicar qué actores o acciones en particular se desean analizar. Los actores instrumentados, además de conservar su funcionalidad original, generan una serie de ficheros que contienen datos sobre los distintos eventos hardware que suceden a lo largo de su ejecución. Los eventos incluidos en estos ficheros son configurables dentro de las anotaciones previamente mencionadas. La segunda herramienta, Papify-Viewer, utiliza los datos generados por Papify y los procesa, obteniendo una representación visual de la información a dos niveles: por un lado, representa cronológicamente la ejecución de la aplicación, distinguiendo cada uno de los actores a lo largo de la misma. Por otro lado, genera estadísticas sobre la cantidad de eventos disparados por acción, actor o núcleo de ejecución y las representa mediante gráficos de barra. Ambas herramientas pueden ser utilizadas en conjunto para verificar el funcionamiento del programa, balancear la carga de los actores o la distribución por núcleos de los mismos, mejorar el rendimiento y diagnosticar problemas. ABSTRACT. This diploma project presents two tools, Papify and Papify-Viewer, used to measure and visualize the low level performance of RVC-CAL specifications based on hardware events. RVC-CAL is a dataflow language standardized by MPEG which is used to define video codec tools. The structure of the applications described in RVC-CAL is based on functional units called actors, which are in turn divided into smaller procedures called actions. ORCC (Open RVC-CAL Compiler) is an open-source compiler capable of transforming RVC-CAL descriptions into source code in a given language, such as C. Internally, the compiler is divided into three distinguishable stages: front-end, middle-end and back-end. Papify’s implementation consists of modifying the compiler’s back-end stage, which is responsible for generating the final source code, so that translated actors in C code are now instrumented with PAPI (Performance Application Programming Interface), a tool that provides an interface to the microprocessor’s performance monitoring counters (PMC). In addition, the front-end is also modified in such a way that allows identification of a certain type of annotations in the RVC-CAL descriptions, allowing the designer to set the actors or actions to be included in the measurement. Besides preserving their initial behavior, the instrumented actors will also generate a set of files containing data about the different events triggered throughout the program’s execution. The events included in these files can be configured inside the previously mentioned annotations. The second tool, Papify-Viewer, makes use of the files generated by Papify to process them and provide a visual representation of the information in two different ways: on one hand, a chronological representation of the application’s execution where each actor has its own timeline. On the other hand, statistical information is generated about the amount of triggered events per action, actor or core. Both tools can be used together to assert the normal functioning of the program, balance the load between actors or cores, improve performance and identify problems.

Análisis y Diseño de Algoritmos de Control Discreto de Sistemas MIMO Lineales y No Lineales Aplicando Técnicas de Control de Estructura Variable

Dentro de las técnicas de control de procesos no lineales, los controladores de estructura variable con modos deslizantes (VSC-SM en sus siglas en inglés) han demostrado ser una solución robusta, por lo cual han sido ampliamente estudiados en las cuatro últimas décadas. Desde los años ochenta se han presentado varios trabajos enfocados a especificar controladores VSC aplicados a sistemas de tiempo discreto (DVSC), siendo uno de los mayores intereses de análisis obtener las mismas prestaciones de robustez e invarianza de los controladores VSC-SM. El objetivo principal del trabajo de Tesis Doctoral consiste en estudiar, analizar y proponer unos esquemas de diseño de controladores DVSC en procesos multivariable tanto lineales como no lineales. De dicho estudio se propone una nueva filosofía de diseño de superficies deslizantes estables donde se han considerado aspectos hasta ahora no estudiados en el uso de DVSC-SM como son las limitaciones físicas de los actuadores y la dinámica deslizante no ideal. Lo más novedoso es 1) la propuesta de una nueva metodología de diseño de superficies deslizantes aplicadas a sistemas MIMO lineales y la extensión del mismo al caso de sistemas multivariables no lineales y 2) la definición de una nueva ley de alcance y de una ley de control robusta aplicada a sistemas MIMO, tanto lineales como no lineales, incluyendo un esquema de reducción de chattering. Finalmente, con el fin de ilustrar la eficiencia de los esquemas presentados, se incluyen ejemplos numéricos relacionados con el tema tratado en cada uno de los capítulos de la memoria. ABSTRACT Over the last four decades, variable structure controllers with sliding mode (VSC-SM) have been extensively studied, demonstrating to be a robust solution among robust nonlinear processes control techniques. Since the late 80s, several research works have been focused on the application of VSC controllers applied to discrete time or sampled data systems, which are known as DVSC-SM, where the most extensive source of analysis has been devoted to the robustness and invariance properties of VSC-SM controllers when applied to discrete systems. The main aim of this doctoral thesis work is to study, analyze and propose a design scheme of DVSC-SM controllers for lineal and nonlinear multivariable discrete time processes. For this purpose, a new design philosophy is proposed, where various design features have been considered that have not been analyzed in DVSC design approaches. Among them, the physical limitations and the nonideal dynamic sliding mode dynamics. The most innovative aspect is the inclusion of a new design methodology applied to lineal sliding surfaces MIMO systems and the extension to nonlinear multivariable systems, in addition to a new robust control law applied to lineal and nonlinear MIMO systems, including a chattering reduction scheme. Finally, to illustrate the efficiency of the proposed schemes, several numerical examples applied to lineal and nonlinear systems are included.

Avaliação de incertezas na calibração automática do modelo SWMM

Este trabalho é referente ao desenvolvimento de um calibrador multiobjetivo automático do modelo SWMM (Storm Water Management Model), e avaliação de algumas fontes de incertezas presentes no processo de calibração, visando à representação satisfatória da transformação chuva-vazão. O código foi escrito em linguagem C, e aplica os conceitos do método de otimização multiobjetivo NSGAII (Non Dominated Sorting Genetic Algorithm) com elitismo controlado, além de utilizar o código fonte do modelo SWMM para a determinação das vazões simuladas. Paralelamente, também foi criada uma interface visual, para melhorar a facilidade de utilização do calibrador. Os testes do calibrador foram aplicados a três sistemas diferentes: um sistema hipotético disponibilizado no pacote de instalação do SWMM; um sistema real de pequenas dimensões, denominado La Terraza, localizado no município de Sierra Vista, Arizona (EUA); e um sistema de maiores dimensões, a bacia hidrográfica do Córrego do Gregório, localizada no município de São Carlos (SP). Os resultados indicam que o calibrador construído apresenta, em geral, eficiência satisfatória, porém é bastante dependente da qualidade dos dados observados em campo e dos parâmetros de entrada escolhidos pelo usuário. Foi demonstrada a importância da escolha dos eventos utilizados na calibração, do estabelecimento de limites adequados nos valores das variáveis de decisão, da escolha das funções objetivo e, principalmente, da qualidade e representatividade dos dados de monitoramento pluvio e fluviométrico. Conclui-se que estes testes desenvolvidos contribuem para o entendimento mais aprofundado dos processos envolvidos na modelagem e calibração, possibilitando avanços na confiabilidade dos resultados da modelagem.

Um método de otimização da relação desempenho/consumo de energia para arquiteturas multi-cores heterogêneas em FPGA

Devido às tendências de crescimento da quantidade de dados processados e a crescente necessidade por computação de alto desempenho, mudanças significativas estão acontecendo no projeto de arquiteturas de computadores. Com isso, tem-se migrado do paradigma sequencial para o paralelo, com centenas ou milhares de núcleos de processamento em um mesmo chip. Dentro desse contexto, o gerenciamento de energia torna-se cada vez mais importante, principalmente em sistemas embarcados, que geralmente são alimentados por baterias. De acordo com a Lei de Moore, o desempenho de um processador dobra a cada 18 meses, porém a capacidade das baterias dobra somente a cada 10 anos. Esta situação provoca uma enorme lacuna, que pode ser amenizada com a utilização de arquiteturas multi-cores heterogêneas. Um desafio fundamental que permanece em aberto para estas arquiteturas é realizar a integração entre desenvolvimento de código embarcado, escalonamento e hardware para gerenciamento de energia. O objetivo geral deste trabalho de doutorado é investigar técnicas para otimização da relação desempenho/consumo de energia em arquiteturas multi-cores heterogêneas single-ISA implementadas em FPGA. Nesse sentido, buscou-se por soluções que obtivessem o melhor desempenho possível a um consumo de energia ótimo. Isto foi feito por meio da combinação de mineração de dados para a análise de softwares baseados em threads aliadas às técnicas tradicionais para gerenciamento de energia, como way-shutdown dinâmico, e uma nova política de escalonamento heterogeneity-aware. Como principais contribuições pode-se citar a combinação de técnicas de gerenciamento de energia em diversos níveis como o nível do hardware, do escalonamento e da compilação; e uma política de escalonamento integrada com uma arquitetura multi-core heterogênea em relação ao tamanho da memória cache L1.

A comparative study of open domain and opinion question answering systems for factual and opinionated queries

The development of the Web 2.0 led to the birth of new textual genres such as blogs, reviews or forum entries. The increasing number of such texts and the highly diverse topics they discuss make blogs a rich source for analysis. This paper presents a comparative study on open domain and opinion QA systems. A collection of opinion and mixed fact-opinion questions in English is defined and two Question Answering systems are employed to retrieve the answers to these queries. The first one is generic, while the second is specific for emotions. We comparatively evaluate and analyze the systems’ results, concluding that opinion Question Answering requires the use of specific resources and methods.

Estudio sobre la utilización de los gestos técnicos en pelota valenciana en jugadores profesionales

Debido a la escasez de estudios de análisis en pelota valenciana, hemos centrado este estudio en este deporte. El objetivo de estudio ha sido analizar y cuantificar los tipos de golpeos, y comparar los mismos entre las posiciones de juego de resto y medio. Para ello se han llevado a cabo el análisis de 6 partidas de la XIX Liga Profesional de «escala i corda» 2009-2010, y en concreto de 12 jugadores, utilizando el software de análisis Sports Code v.8.5.2. Los resultados nos indican diferencias significativas (p<0.05) entre los golpeos efectuados por el jugador resto y el jugador medio en el rebote y rebote a golpe de mano derecha e izquierda y caída de escalera de mano derecha; siendo estos prácticamente realizados únicamente por los jugadores de la posición resto. Al mismo tiempo encontramos datos que nos evidencian por otra banda golpeos utilizados principalmente por jugadores medios, estas han sido el golpeo de volea, el bote de brazo, el calbote, la palma, y el manró todos ellos de mano derecha. Como conclusión del estudio, hemos obtenido que dependiendo de la posición de juego los jugadores utilizan unos tipos de golpeo u otros. Por tanto, afirmamos, que el análisis del alto rendimiento en escala i corda desde los avances de las tecnologías, nos aporta una valiosa información para establecer patrones de entrenamiento específicos.

Real-time 3D semi-local surface patch extraction using GPGPU

Feature vectors can be anything from simple surface normals to more complex feature descriptors. Feature extraction is important to solve various computer vision problems: e.g. registration, object recognition and scene understanding. Most of these techniques cannot be computed online due to their complexity and the context where they are applied. Therefore, computing these features in real-time for many points in the scene is impossible. In this work, a hardware-based implementation of 3D feature extraction and 3D object recognition is proposed to accelerate these methods and therefore the entire pipeline of RGBD based computer vision systems where such features are typically used. The use of a GPU as a general purpose processor can achieve considerable speed-ups compared with a CPU implementation. In this work, advantageous results are obtained using the GPU to accelerate the computation of a 3D descriptor based on the calculation of 3D semi-local surface patches of partial views. This allows descriptor computation at several points of a scene in real-time. Benefits of the accelerated descriptor have been demonstrated in object recognition tasks. Source code will be made publicly available as contribution to the Open Source Point Cloud Library.

SubCM: A tool for improved visibility of software change in an industrial setting

Software Configuration Management is the discipline of managing large collections of software development artefacts from which software products are built. Software configuration management tools typically deal with artefacts at fine levels of granularity - such as individual source code files - and assist with coordination of changes to such artefacts. This paper describes a lightweight tool, designed to be used on top of a traditional file-based configuration management system. The add-on tool support enables users to flexibly define new hierarchical views of product structure, independent of the underlying artefact-repository structure. The tool extracts configuration and change data with respect to the user-defined hierarchy, leading to improved visibility of how individual subsystems have changed. The approach yields a range of new capabilities for build managers, and verification and validation teams. The paper includes a description of our experience using the tool in an organization that builds large embedded software systems.

Procedure compilation in the refinement calculus

High-level language program compilation strategies can be proven correct by modelling the process as a series of refinement steps from source code to a machine-level description. We show how this can be done for programs containing recursively-defined procedures in the well-established predicate transformer semantics for refinement. To do so the formalism is extended with an abstraction of the way stack frames are created at run time for procedure parameters and variables.

Type X pottery, Morobe Province, Papua New Guinea: Petrography and possible Micronesian relationships

Type X is one of four Post-Lapita pottery styles reported from Huon Peninsula and the Siassi Islands of Papua New Guinea. Previous petrographic work was inconclusive about its likely area of origin but indicated a possible Huon Peninsula source. Renewed analysis of a larger sample supports this conclusion and confirms the use of grog temper. This kind of temper is otherwise not recorded in the New Guinea region, and its use in the production of Type X was probably culturally driven. Comparisons between Type X and grog-tempered pottery from Palau, Yap, and Pohnpei in Micronesia lead to the suggestion that Type X probably derived from an otherwise unrecorded contact between Huon Peninsula and Palau about 1000 years ago. The article reviews other evidence for interaction between the New Guinea-Bismarck Archipelago region and various parts of Micronesia and concludes that the proposed Type X connection with Palau is but one of several prehistoric contacts between different parts of the regions. Recognition of such contacts, which could have been unintentional and on a small scale, may contribute to explaining the complex ethnolinguistic situation of Huon Peninsula.

Design and implementation of graphical user interfaces for complex simulations

The development of increasingly powerful computers, which has enabled the use of windowing software, has also opened the way for the computer study, via simulation, of very complex physical systems. In this study, the main issues related to the implementation of interactive simulations of complex systems are identified and discussed. Most existing simulators are closed in the sense that there is no access to the source code and, even if it were available, adaptation to interaction with other systems would require extensive code re-writing. This work aims to increase the flexibility of such software by developing a set of object-oriented simulation classes, which can be extended, by subclassing, at any level, i.e., at the problem domain, presentation or interaction levels. A strategy, which involves the use of an object-oriented framework, concurrent execution of several simulation modules, use of a networked windowing system and the re-use of existing software written in procedural languages, is proposed. A prototype tool which combines these techniques has been implemented and is presented. It allows the on-line definition of the configuration of the physical system and generates the appropriate graphical user interface. Simulation routines have been developed for the chemical recovery cycle of a paper pulp mill. The application, by creation of new classes, of the prototype to the interactive simulation of this physical system is described. Besides providing visual feedback, the resulting graphical user interface greatly simplifies the interaction with this set of simulation modules. This study shows that considerable benefits can be obtained by application of computer science concepts to the engineering domain, by helping domain experts to tailor interactive tools to suit their needs.