Gender differences in the association of a high quality job and self-esteem over time: A multiwave study

High self-esteem often predicts job-related outcomes, such as high job satisfaction or high status. Theoretically, high quality jobs (HQJs) should be important for self-esteem, as they enable people to use a variety of skills and attribute accomplishments to themselves, but research findings are mixed. We expected reciprocal relationships between self-esteem and HQJ. However, as work often is more important for the status of men, we expected HQJ to have a stronger influence on self-esteem for men as compared to women. Conversely, task-related achievements violate gender stereotypes for women, who may need high self-esteem to obtain HQJs. In a 4-year cross-lagged panel analysis with 325 young workers, self-esteem predicted HQJ; the lagged effect from HQJ on self-esteem was marginally significant. In line with the hypotheses, the multigroup model showed a significant path only from self-esteem to HQJ for women, and from HQJ to self-esteem for men. The reverse effect was not found for women, and only marginally significant for men. Overall, although there were some indications for reciprocal effects, our findings suggest that women need high self-esteem to obtain HQJs to a greater degree than men, and that men base their self-esteem on HQJs to a greater extent than women.

An evaluation of a Lake Houston tributary, Cypress Creek, for contamination and water quality

Introduction. Lake Houston serves as a reservoir for both recreational and drinking water for residents of Houston, Texas, and the metropolitan area. The Texas Commission on Environmental Quality (TCEQ) expressed concerns about the water quality and increasing amounts of pathogenic bacteria in Lake Houston (3). The objective of this investigation is to evaluate water quality for the presence of bacteria, nitrates, nitrites, carbon, phosphorus, dissolved oxygen, pH, turbidity, suspended solids, dissolved solids, and chlorine in Cypress Creek. The aims of this project are to analyze samples of water from Cypress Creek and to render a quantitative and graphical representation of the results. The collected information will allow for a better understanding of the aqueous environment in Cypress Creek.^ Methods. Water samples were collected in August 2009 and analyzed in the field and at UTSPH laboratory by spectrophotometry and other methods. Mapping software was utilized to develop novel maps of the sample sites using coordinates attained with the Global Positioning System (GPS). Sample sites and concentrations were mapped using Geographic Information System (GIS) software and correlated with permitted outfalls and other land use characteristic.^ Results. All areas sampled were positive for the presence of total coliform and Escherichia coli (E. coli). The presences of other water contaminants varied at each location in Cypress Creek but were under the maximum allowable limits designated by the Texas Commission on Environmental Quality. However, dissolved oxygen concentrations were elevated above the TCEQ limit of 5.0 mg/L at majority of the sites. One site had near-limit concentration of nitrates at 9.8 mg/L. Land use above this site included farm land, agricultural land, golf course, parks, residential neighborhoods, and nine permitted TCEQ effluent discharge sites within 0.5 miles upstream.^ Significance. Lake Houston and its tributary, Cypress Creek, are used as recreational waters where individuals may become exposed to microbial contamination. Lake Houston also is the source of drinking water for much of Houston/Harris and Galveston Counties. This research identified the presence of microbial contaminates in Cypress Creek above TCEQ regulatory requirements. Other water quality variables measured were in line with TCEQ regulations except for near-limit for nitrate at sample site #10, at Jarvis and Timberlake in Cypress Texas.^

BSRN Toolbox V2.0 - a tool to create quality checked output files from BSRN datasets and station-to-archive files

The BSRN Toolbox is a software package supplied by the WRMC and is freely available to all station scientists and data users. The main features of the package include a download manager for Station- to-Archive files, a tool to convert files into human readable TAB-separated ASCII-tables (similar to those output by the PANGAEA database), and a tool to check data sets for violations of the "BSRN Global Network recommended QC tests, V2.0" quality criteria. The latter tool creates quality codes, one per measured value, indicating if the data are "physically possible," "extremely rare," or if "intercomparison limits are exceeded." In addition, auxiliary data such as solar zenith angle or global calculated from diffuse and direct can be output. All output from the QC tool can be visualized using PanPlot (doi:10.1594/PANGAEA.816201).

Software Design Guidelines for Usability

For years, the Human Computer Interaction (HCI) community has crafted usability guidelines that clearly define what characteristics a software system should have in order to be easy to use. However, in the Software Engineering (SE) community keep falling short of successfully incorporating these recommendations into software projects. From a SE perspective, the process of incorporating usability features into software is not always straightforward, as a large number of these features have heavy implications in the underlying software architecture. For example, successfully including an “undo” feature in an application requires the design and implementation of many complex interrelated data structures and functionalities. Our work is focused upon providing developers with a set of software design patterns to assist them in the process of designing more usable software. This would contribute to the proper inclusion of specific usability features with high impact on the software design. Preliminary validation data show that usage of the guidelines also has positive effects on development time and overall software design quality.

Quantitative Determination of the Relationship between Internal Validity and Bias in Software Engineering Experiments: Consequences for Systematic Literature Reviews

Quality assessment is one of the activities performed as part of systematic literature reviews. It is commonly accepted that a good quality experiment is bias free. Bias is considered to be related to internal validity (e.g., how adequately the experiment is planned, executed and analysed). Quality assessment is usually conducted using checklists and quality scales. It has not yet been proven;however, that quality is related to experimental bias. Aim: Identify whether there is a relationship between internal validity and bias in software engineering experiments. Method: We built a quality scale to determine the quality of the studies, which we applied to 28 experiments included in two systematic literature reviews. We proposed an objective indicator of experimental bias, which we applied to the same 28 experiments. Finally, we analysed the correlations between the quality scores and the proposed measure of bias. Results: We failed to find a relationship between the global quality score (resulting from the quality scale) and bias; however, we did identify interesting correlations between bias and some particular aspects of internal validity measured by the instrument. Conclusions: There is an empirically provable relationship between internal validity and bias. It is feasible to apply quality assessment in systematic literature reviews, subject to limits on the internal validity aspects for consideration.

An architectural model for software testing lesson learned systems

Software testing is a key aspect of software reliability and quality assurance in a context where software development constantly has to overcome mammoth challenges in a continuously changing environment. One of the characteristics of software testing is that it has a large intellectual capital component and can thus benefit from the use of the experience gained from past projects. Software testing can, then, potentially benefit from solutions provided by the knowledge management discipline. There are in fact a number of proposals concerning effective knowledge management related to several software engineering processes. Objective: We defend the use of a lesson learned system for software testing. The reason is that such a system is an effective knowledge management resource enabling testers and managers to take advantage of the experience locked away in the brains of the testers. To do this, the experience has to be gathered, disseminated and reused. Method: After analyzing the proposals for managing software testing experience, significant weaknesses have been detected in the current systems of this type. The architectural model proposed here for lesson learned systems is designed to try to avoid these weaknesses. This model (i) defines the structure of the software testing lessons learned; (ii) sets up procedures for lesson learned management; and (iii) supports the design of software tools to manage the lessons learned. Results: A different approach, based on the management of the lessons learned that software testing engineers gather from everyday experience, with two basic goals: usefulness and applicability. Conclusion: The architectural model proposed here lays the groundwork to overcome the obstacles to sharing and reusing experience gained in the software testing and test management. As such, it provides guidance for developing software testing lesson learned systems.

Advanced predictive quality control strategy involving different facilities

There are many industries that use highly technological solutions to improve quality in all of their products. The steel industry is one example. Several automatic surface-inspection systems are used in the steel industry to identify various types of defects and to help operators decide whether to accept, reroute, or downgrade the material, subject to the assessment process. This paper focuses on promoting a strategy that considers all defects in an integrated fashion. It does this by managing the uncertainty about the exact position of a defect due to different process conditions by means of Gaussian additive influence functions. The relevance of the approach is in making possible consistency and reliability between surface inspection systems. The results obtained are an increase in confidence in the automatic inspection system and an ability to introduce improved prediction and advanced routing models. The prediction is provided to technical operators to help them in their decision-making process. It shows the increase in improvement gained by reducing the 40 % of coils that are downgraded at the hot strip mill because of specific defects. In addition, this technology facilitates an increase of 50 % in the accuracy of the estimate of defect survival after the cleaning facility in comparison to the former approach. The proposed technology is implemented by means of software-based, multi-agent solutions. It makes possible the independent treatment of information, presentation, quality analysis, and other relevant functions.

Fruit quality sensing:Post-harvest ripeness

Firmness sensing of selected varieties of apples, pears and avocado fruits has been developed using a nondestructive impact technique. In addition to firmness measurements, postharvest ripeness of apples and pears was monitored by spectrophotometric reflectance measurements, and that of avocadoes by Hunter colour measurements. The data obtained from firmness sensing were analyzed by three analytical procedures: principal component, correlation and regression, and stepwise discriminant analysis. A new software was developed to control the impact test, analyse the data, and sort the fruit into specified classes, based on the criteria obtained from a training procedure. Similar procedures were used to analyse the reflectance and colour data. Both sensing systems were able to classify fruits w i th good accuracy.

Managing software development information in global configuration management activities

Software Configuration Management (SCM) techniques have been considered the entry point to rigorous software engineering, where multiple organizations cooperate in a decentralized mode to save resources, ensure the quality of the diversity of software products, and manage corporate information to get a better return of investment. The incessant trend of Global Software Development (GSD) and the complexity of implementing a correct SCM solution grow not only because of the changing circumstances, but also because of the interactions and the forces related to GSD activities. This paper addresses the role SCM plays in the development of commercial products and systems, and introduces a SCM reference model to describe the relationships between the different technical, organizational, and product concerns any software development company should support in the global market.

Estudio de la fiabilidad software, según defectos, en controladores de velocidad para robots autónomos móviles

Tanto los robots autónomos móviles como los robots móviles remotamente operados se utilizan con éxito actualmente en un gran número de ámbitos, algunos de los cuales son tan dispares como la limpieza en el hogar, movimiento de productos en almacenes o la exploración espacial. Sin embargo, es difícil garantizar la ausencia de defectos en los programas que controlan dichos dispositivos, al igual que ocurre en otros sectores informáticos. Existen diferentes alternativas para medir la calidad de un sistema en el desempeño de las funciones para las que fue diseñado, siendo una de ellas la fiabilidad. En el caso de la mayoría de los sistemas físicos se detecta una degradación en la fiabilidad a medida que el sistema envejece. Esto es debido generalmente a efectos de desgaste. En el caso de los sistemas software esto no suele ocurrir, ya que los defectos que existen en ellos generalmente no han sido adquiridos con el paso del tiempo, sino que han sido insertados en el proceso de desarrollo de los mismos. Si dentro del proceso de generación de un sistema software se focaliza la atención en la etapa de codificación, podría plantearse un estudio que tratara de determinar la fiabilidad de distintos algoritmos, válidos para desempeñar el mismo cometido, según los posibles defectos que pudieran introducir los programadores. Este estudio básico podría tener diferentes aplicaciones, como por ejemplo elegir el algoritmo menos sensible a los defectos, para el desarrollo de un sistema crítico o establecer procedimientos de verificación y validación, más exigentes, si existe la necesidad de utilizar un algoritmo que tenga una alta sensibilidad a los defectos. En el presente trabajo de investigación se ha estudiado la influencia que tienen determinados tipos de defectos software en la fiabilidad de tres controladores de velocidad multivariable (PID, Fuzzy y LQR) al actuar en un robot móvil específico. La hipótesis planteada es que los controladores estudiados ofrecen distinta fiabilidad al verse afectados por similares patrones de defectos, lo cual ha sido confirmado por los resultados obtenidos. Desde el punto de vista de la planificación experimental, en primer lugar se realizaron los ensayos necesarios para determinar si los controladores de una misma familia (PID, Fuzzy o LQR) ofrecían una fiabilidad similar, bajo las mismas condiciones experimentales. Una vez confirmado este extremo, se eligió de forma aleatoria un representante de clase de cada familia de controladores, para efectuar una batería de pruebas más exhaustiva, con el objeto de obtener datos que permitieran comparar de una forma más completa la fiabilidad de los controladores bajo estudio. Ante la imposibilidad de realizar un elevado número de pruebas con un robot real, así como para evitar daños en un dispositivo que generalmente tiene un coste significativo, ha sido necesario construir un simulador multicomputador del robot. Dicho simulador ha sido utilizado tanto en las actividades de obtención de controladores bien ajustados, como en la realización de los diferentes ensayos necesarios para el experimento de fiabilidad. ABSTRACT Autonomous mobile robots and remotely operated robots are used successfully in very diverse scenarios, such as home cleaning, movement of goods in warehouses or space exploration. However, it is difficult to ensure the absence of defects in programs controlling these devices, as it happens in most computer sectors. There exist different quality measures of a system when performing the functions for which it was designed, among them, reliability. For most physical systems, a degradation occurs as the system ages. This is generally due to the wear effect. In software systems, this does not usually happen, and defects often come from system development and not from use. Let us assume that we focus on the coding stage in the software development pro¬cess. We could consider a study to find out the reliability of different and equally valid algorithms, taking into account any flaws that programmers may introduce. This basic study may have several applications, such as choosing the algorithm less sensitive to pro¬gramming defects for the development of a critical system. We could also establish more demanding procedures for verification and validation if we need an algorithm with high sensitivity to programming defects. In this thesis, we studied the influence of certain types of software defects in the reliability of three multivariable speed controllers (PID, Fuzzy and LQR) designed to work in a specific mobile robot. The hypothesis is that similar defect patterns affect differently the reliability of controllers, and it has been confirmed by the results. From the viewpoint of experimental planning, we followed these steps. First, we conducted the necessary test to determine if controllers of the same family (PID, Fuzzy or LQR) offered a similar reliability under the same experimental conditions. Then, a class representative was chosen at ramdom within each controller family to perform a more comprehensive test set, with the purpose of getting data to compare more extensively the reliability of the controllers under study. The impossibility of performing a large number of tests with a real robot and the need to prevent the damage of a device with a significant cost, lead us to construct a multicomputer robot simulator. This simulator has been used to obtain well adjusted controllers and to carry out the required reliability experiments.

Qualitative operational risk software -development of a software tool for determining the root of operational risk

This article shows software that allows determining the statistical behavior of qualitative data originating surveys previously transformed with a Likert’s scale to quantitative data. The main intention is offer to users a useful tool to know statistics' characteristics and forecasts of financial risks in a fast and simple way. Additionally,this paper presents the definition of operational risk. On the other hand, the article explains different techniques to do surveys with a Likert’s scale (Avila, 2008) to know expert’s opinion with the transformation of qualitative data to quantitative data. In addition, this paper will show how is very easy to distinguish an expert’s opinion related to risk, but when users have a lot of surveys and matrices is very difficult to obtain results because is necessary to compare common data. On the other hand, statistical value representative must be extracted from common data to get weight of each risk. In the end, this article exposes the development of “Qualitative Operational Risk Software” or QORS by its acronym, which has been designed to determine the root of risks in organizations and its value at operational risk OpVaR (Jorion, 2008; Chernobai et al, 2008) when input data comes from expert’s opinion and their associated matrices.

The Innovation Sources in Software Engineering: A Systematic Literature Review

During the last century many researches on the business, marketing and technology fields have developed the innovation research line and large amount of knowledge can be found in the literature. Currently, the importance of systematic and openness approaches to manage the available innovation sources is well established in many knowledge fields. Also in the software engineering sector, where the organizations need to absorb and to exploit as much innovative ideas as possible to get success in the current competitive environment. This Master Thesis presents an study related with the innovation sources in the software engineering eld. The main research goals of this work are the identication and the relevance assessment of the available innovation sources and the understanding of the trends on the innovation sources usage. Firstly, a general review of the literature have been conducted in order to define the research area and to identify research gaps. Secondly, the Systematic Literature Review (SLR) has been proposed as the research method in this work to report reliable conclusions collecting systematically quality evidences about the innovation sources in software engineering field. This contribution provides resources, built-on empirical studies included in the SLR, to support a systematic identication and an adequate exploitation of the innovation sources most suitable in the software engineering field. Several artefacts such as lists, taxonomies and relevance assessments of the innovation sources most suitable for software engineering have been built, and their usage trends in the last decades and their particularities on some countries and knowledge fields, especially on the software engineering, have been researched. This work can facilitate to researchers, managers and practitioners of innovative software organizations the systematization of critical activities on innovation processes like the identication and exploitation of the most suitable opportunities. Innovation researchers can use the results of this work to conduct research studies involving the innovation sources research area. Whereas, organization managers and software practitioners can use the provided outcomes in a systematic way to improve their innovation capability, increasing consequently the value creation in the processes that they run to provide products and services useful to their environment. In summary, this Master Thesis research the innovation sources in the software engineering field, providing useful resources to support an effective innovation sources management. Moreover, several aspects should be deeply study to increase the accuracy of the presented results and to obtain more resources built-on empirical knowledge. It can be supported by the INno- vation SOurces MAnagement (InSoMa) framework, which is introduced in this work in order to encourage openness and systematic approaches to identify and to exploit the innovation sources in the software engineering field.

Development of a Model for Security and Usability

This research addressed the development of a consolidated model designed especially to cover the security and usability attributes of a software product. As a starting point, we built a new usability model on the basis of well-known quality standards and models. We then used an existing security model to analyse the relationship between these two approaches. This analysis consisted of a systematic mapping study of the relationship between security and usability as global quality factors. We identified five relationship types: inverse, direct, relative, one-way inverse, and no relationship. Most authors agree that there is an inverse relationship between security and usability. However, this is not a unanimous finding, and this study unveils a number of open questions, like application domain dependency and the need to explore lower-level relationships between attribute subcharacteristics. In order to clarify the questions raised during the research, we conducted a second systematic mapping to further analyse the finer-grained structure of these factors, such as authentication as a subset of security and user efficiency as a subset of usability. The most relevant finding is that efficiency does not depend on the security level during the authentication process. There are other subfactors that require analysis. Accordingly, this research is the first part of a larger project to develop a full-blown consolidated model for security and usability.

Software industry experiments: a systematic literature review

There is no specialized survey of experiments conducted in the software industry. Goal: Identify the major features of software industry experiments, such as time distribution, independent and dependent variables, subject types, design types and challenges. Method: Systematic literature review, taking the form of a scoping study. Results: We have identified 10 experiments and five quasi-experiments up to July 2012. Most were run as of 2003. The main features of these studies are that they test technologies related to quality and management and analyse outcomes related to effectiveness and effort. Most experiments have a factorial design. The major challenges faced by experimenters are to minimize the cost of running the experiment for the company and to schedule the experiment so as not to interfere with production processes.

A survey on service quality description

Quality of service (QoS) can be a critical element for achieving the business goals of a service provider, for the acceptance of a service by the user, or for guaranteeing service characteristics in a composition of services, where a service is defined as either a software or a software-support (i.e., infrastructural) service which is available on any type of network or electronic channel. The goal of this article is to compare the approaches to QoS description in the literature, where several models and metamodels are included. consider a large spectrum of models and metamodels to describe service quality, ranging from ontological approaches to define quality measures, metrics, and dimensions, to metamodels enabling the specification of quality-based service requirements and capabilities as well as of SLAs (Service-Level Agreements) and SLA templates for service provisioning. Our survey is performed by inspecting the characteristics of the available approaches to reveal which are the consolidated ones and which are the ones specific to given aspects and to analyze where the need for further research and investigation lies. The approaches here illustrated have been selected based on a systematic review of conference proceedings and journals spanning various research areas in computer science and engineering, including: distributed, information, and telecommunication systems, networks and security, and service-oriented and grid computing.