Ansatzpunkte für das Change-Management beim Aufbau einer Notebook-Universität

Die Einführung von Notebooks an einer Universität bringt zunächst keine grundlegende Innovation mit sich. Die Potenziale, die mit dem Einsatz von Notebooks in der Präsenzlehre verbunden sind, sind vielfältig. Der Beitrag zeigt auf, welche Vorteile der Notebook-Einsatz auf den unterschiedlichen Ebenen Individuum, Gruppe und Organisation beinhaltet. Am Beispiel des eCampus-Projektes der Universität Duisburg-Essen zeigt sich, dass dieser Mehrwert sich jedoch nicht von selbst einstellt, sondern an bestimmte Bedingungen auf den verschiedenen Ebenen geknüpft ist. Es sind Maßnahmen notwendig, um die intendierten Veränderungsprozesse in Gang zu setzen, damit Notebooks im Alltag von Lehre und Forschung verankert werden können. Dazu sind Maßnahmen in den Bereichen Infrastruktur, didaktische Reform, Personal- und Organisationsentwicklung sowie Medienproduktion und -distribution zu ergreifen und in einem angemessenen Gleichgewicht umzusetzen. (DIPF/Orig.)

Who Governs Educational Change? The Paradoxes of State Power and the Pursuit of Educational Reform in Post-Neoliberal Ecuador (2007-2015)

This study identifies and compares competing policy stories of key actors involved in the Ecuadorian education reform under President Rafael Correa from 2007-2015. By revealing these competing policy stories the study generates insights into the political and technical aspects of education reform in a context where state capacity has been eroded by decades of neoliberal policies. Since the elections in 2007, President Correa has focused much of his political effort and capital on reconstituting the state’s authority and capacity to not only formulate but also implement public policies. The concentration of power combined with a capacity building agenda allowed the Correa government to advance an ambitious comprehensive education reform with substantive results in equity and quality. At the same time the concentration of power has undermined a more inclusive and participatory approach which are essential for deepening and sustaining the reform. This study underscores both the limits and importance of state control over education; the inevitable conflicts and complexities associated with education reforms that focus on quality; and the limits and importance of participation in reform. Finally, it examines the analytical benefits of understanding governance, participation and quality as socially constructed concepts that are tied to normative and ideological interests.

Investment specific technological progress and structural change

Neste artigo, estendemos o modelo Pasinettiano de mudança estrutural e crescimento econômico para levar em consideração a possibilidade de o progresso tecnológico estar incorporado nos bens de capital. Nosso objetivo consiste em estudar os efeitos do progresso tecnológico investimento específico sobre a mudança estrutural, com especial ênfase nos seus impactos sobre variáveis macroeconômicas como o nível de emprego. Nossos achados mostram que, apesar de esse tipo de progresso tecnológico aumentar a produtividade dos bens de capital, ele impacta negativamente o nível de emprego e as condições de equilíbrio da economia. _________________________________________________________________________________ ABSTRACT

Contextualising change through a common strategy

European universities are currently going through a process of change in order to meet the common goals set for higher education by the European Commission. They are revising their educational models to adjust them to the guidelines of the ‘‘Bologna Process’’ and are devising an institutional strategy for its implementation. In practical terms, this means aligning former national degrees and diplomas to standard European Bachelor and Masters degrees and PhD doctorates, by creating acknowledged professional qualification benchmarks that also include adjusted course lengths and contents. This process, in the end, mostly affects academic staff members who have a fundamental role to play in carrying out the pedagogical reforms on the teaching front. Besides presenting a commentary on the institutional approach of one particular technical university in Spain, the purpose of this paper is to propose, from the authors’ point of view as lecturers, a strategy which has the potential to create a favourable atmosphere for carrying out such a reform. The article’s main objective is to highlight a series of action points which may serve to reinforce and advance the main institutional strategy by relying on the powerful influence of its academic staff members

Climate change adaptation solutions for the green sectors of selected zones in the MENA region

In this paper, we propose climate adaptation solutions for the green sectors in three different zones of MENA: Egypt’s Delta (irrigated), Karak, in the highlands of Jordan (rainfed), and Lebanon’s Orontes basin (mixed: rainfed-irrigated). We analysed land use and crop intensification, and calculated the economic productivity of water – a critical scarce resource in MENA. By integrating the results with evidence from literature on the potential impacts of climate change and socio-economic factors, we could identify vulnerability levels of the three regions and propose adaptation measures relying of the concept of the “food-water-energy nexus.” While the vulnerability levels are found to be high in the Delta (Egypt) and Karak (Jordan), mainly due to water scarcity and poor adaptive capacity, the vulnerability level is moderate in the Orontes zone (Lebanon) due to a diversified agricultural sector and good market development, coupled with moderate water scarcity. Proposed adaptation solutions range from measures to improve technical efficiency, to measures that encourage economically efficient allocation by use of market forces. For both cases, the development of market opportunities is emphasized to make the proposed measures attractive to farmers.

Entrepreneurship: a long way to go

Entrepreneurship education has emerged as one popular research domain in academic fields given its aim at enhancing and developing certain entrepreneurial qualities of undergraduates that change their state of behavior, even their entrepreneurial inclination and finally may result in the formation of new businesses as well as new job opportunities. This study attempts to investigate the Colombian student´s entrepreneurial qualities and the influence of entrepreneurial education during their studies.

E-Procurement and Innovation in the Portuguese Municipalities: When Change Is Mandatory

Changing the traditional pattern of public procurement for an electronic paradigm is a radical innovation involving major organizational changes, the breaking up of traditional processes and practices, obsolescence of knowledge and skills. Going beyond the European Commission's recommendations, in 2009 Portugal pioneered in making e-procurement mandatory in the pre-award phase, in a European context of multiple technical standards and lack of interoperability of electronic platforms across the EU countries. Six years later, when the creation of a European e-procurement single market is a EU mission and a major legislative amendment is underway in Portugal, this study looks at the relationship between e-procurement and innovation in the Portuguese municipalities aiming to understand the extent into which the adoption of e-procurement embraced a real organizational change or, on the other hand, if it just represented a mere adaptation of the usual procurement practices. The study draws on data from an electronic survey to all municipalities in mainland Portugal and the analysis is mainly descriptive and exploratory. The paradigm shift in public procurement involves major organizational changes but, overall, the results suggest that most municipalities do not have a clear understanding of the innovative scope (depth and diversity) implied by e-procurement. E-procurement shows advantages over the paper-based model but an unbalanced perception of the innovation dimensions has influenced the implementation of e-procurement and the degree of organizational change.

Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerizing Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A-- water bath at 74ºC for 9 h; B-- water bath at 74ºC for 8 h and temperature increased to 100ºC for 1 h; C-- water bath at 74ºC for 2 h and temperature increased to 100ºC for 1 h;; and D-- water bath at 120ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 sec was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerization Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A) water bath at 74 ºC for 9 h; B) water bath at 74 ºC for 8 h and temperature increased to 100 ºC for 1 h; C) water bath at 74 ºC for 2 h and temperature increased to 100 ºC for 1 h; and D) water bath at 120 ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37 ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 s was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Biased Random-key Genetic Algorithms For The Winner Determination Problem In Combinatorial Auctions.

Abstract In this paper, we address the problem of picking a subset of bids in a general combinatorial auction so as to maximize the overall profit using the first-price model. This winner determination problem assumes that a single bidding round is held to determine both the winners and prices to be paid. We introduce six variants of biased random-key genetic algorithms for this problem. Three of them use a novel initialization technique that makes use of solutions of intermediate linear programming relaxations of an exact mixed integer-linear programming model as initial chromosomes of the population. An experimental evaluation compares the effectiveness of the proposed algorithms with the standard mixed linear integer programming formulation, a specialized exact algorithm, and the best-performing heuristics proposed for this problem. The proposed algorithms are competitive and offer strong results, mainly for large-scale auctions.

Análise cinemática tridimensional do salto em distância de atletas de alto nível em competição

Universidade Estadual de Campinas . Faculdade de Educação Física

A ginastica nos cursos de licenciatura em educação fisica do Estado do Parana

Universidade Estadual de Campinas. Faculdade de Educação Física

Salto triplo : o sistema de preparaçao do desportista : da detecção a promoção do talento

Universidade Estadual de Campinas . Faculdade de Educação Física

Effect of ageing and immersion in different beverages on properties of denture lining materials

OBJECTIVES: To evaluate the color stability and hardness of two denture liners obtained by direct and indirect techniques, after thermal cycling and immersion in beverages that can cause staining of teeth. MATERIAL AND METHODS: Seventy disc-shaped specimens (18 x 3 mm) processed by direct (DT) and indirect techniques (IT) were made from Elite soft (n=35) and Kooliner (n=35) denture liners. For each material and technique, 10 specimens were subjected to thermal cycling (3,000 cycles) and 25 specimens were stored in water, coffee, tea, soda and red wine for 36 days. The values of color change, Shore A hardness (Elite soft) and Knoop hardness (Kooliner) were obtained. The data were subjected to ANOVA, Tukey's multiple-comparison test, and Kruskal-Wallis test (P<0.05). RESULTS: The thermal cycling promoted a decrease on hardness of Kooliner regardless of the technique used (Initial: 9.09± 1.61; Thermal cycling: 7.77± 1.47) and promoted an increase in the hardness in the DT for Elite Soft (Initial: 40.63± 1.07; Thermal cycling: 43.53± 1.03); hardness of Kooliner (DT: 8.76± 0.95; IT: 7.70± 1.62) and Elite Soft (DT: 42.75± 1.54; IT=39.30± 2.31) from the DT suffered an increase after the immersion in the beverages. The thermal cycling promoted color change only for Kooliner in the IT. Immersion in the beverages did not promote color change for Elite in both techniques. The control group of the DT of Kooliner showed a significant color change. Wine and coffee produced the greatest color change in the DT only for Elite Soft when compared to the other beverages. CONCLUSION: The three variation factors promoted alteration on hardness and color of the tested denture lining materials.

Composite resin color stability: influence of light sources and immersion media

OBJECTIVE: This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. MATERIAL AND METHODS: Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). RESULTS: High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus - ΔE=2.05; XL 3000 - ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. CONCLUSION: There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.