A modest start, but a steady rise in research use : A longitudinal study of nurses during the first five years in professional life

Background: Newly graduated nurses are faced with a challenging work environment that may impede theirability to provide evidence-based practice. However, little is known about the trajectory of registered nurses’ use ofresearch during the first years of professional life. Thus, the aim of the current study was to prospectively examinethe extent of nurses’ use of research during the first five years after undergraduate education and specifically assesschanges over time.Method: Survey data from a prospective cohort of 1,501 Swedish newly graduated nurses within the nationalLANE study (Longitudinal Analyses of Nursing Education and Entry in Worklife) were used to investigate perceiveduse of research over the first five years as a nurse. The dependent variables consisted of three single itemsassessing instrumental, conceptual, and persuasive research use, where the nurses rated their use on a five-pointscale, from ‘never’ (1) to ‘on almost every shift’ (5). These data were collected annually and analyzed bothdescriptively and by longitudinal growth curve analysis.Results: Instrumental use of research was most frequently reported, closely followed by conceptual use, withpersuasive use occurring to a considerably lower extent. The development over time showed a substantial generalupward trend, which was most apparent for conceptual use, increasing from a mean of 2.6 at year one to 3.6 atyear five (unstandardized slope +0.25). However, the descriptive findings indicated that the increase started onlyafter the second year. Instrumental use had a year one mean of 2.8 and a year five mean of 3.5 (unstandardizedslope +0.19), and persuasive use showed a year one mean of 1.7 and a year five mean of 2.0 (unstandardized slope+0.09).Conclusion: There was a clear trend of increasing research use by nurses during their first five years of practice.The level of the initial ratings also indicated the level of research use in subsequent years. However, it took morethan two years of professional development before this increase ‘kicked in.’ These findings support previousresearch claiming that newly graduated nurses go through a ‘transition shock,’ reducing their ability to useresearch findings in clinical work.

Globalization, Agency, and Institutional Innovation: The Rise of Public-Private Partnerships in Global Governance

Public and private actors increasingly cooperate in global governance, a realm previously reserved for states and intergovernmental organizations (IOs). This trend raises fascinating theoretical questions. What explains the rise in public-private institutions and their role in international politics? Who leads such institutional innovation and why? To address the questions, this paper develops a theory of the political demand and supply of public-private institutions and specifies the conditions under which IOs and non-state actors would cooperate, and states would support this public-private cooperation. The observable implications of the theoretical argument are evaluated against the broad trends in public-private cooperation and in a statistical analysis of the significance of demand and supply-side incentives in public-private cooperation for sustainable development. The study shows that public-private institutions do not simply fill governance gaps opened by globalization, but cluster in narrower areas of cooperation, where the strategic interests of IOs, states, and transnational actors intersect.

ESTIMATING THE IMPACT OF CATASTROPHIC SEA LEVEL RISE IN MAINE

http://digitalcommons.colby.edu/atlasofmaine2006/1016/thumbnail.jpg

Estimating the Impact of Catastrophic Sea Level Rise in Maine

Maine's 3,500 miles of coastline is the longest coastline in the continental US. The goal of our study was to use GIS to estimate the impact future global sea level rise could potentially have on our state. We show the area of coastline and some of the economic and social impacts that would result from a rise of one meter and six meters. We used roads to estimate the impact on infrastructure and public building, including schools, libraries, hospitals, police and fire stations, as a measure of social impact. A sea level rise of six meters would result in a loss of over 650 km¬2 from coastal communities and cost the state of Maine over 3 million in repaving costs. Through our study, we hope coastal communities will be able to prepare for and react to the predicted changes in global sea level.

Sintering of tin oxide and its applications in electronics and processing of high purity optical glasses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of ball-milled low purity boron powder on the superconductivity of MgB2

MgB2 samples were prepared using as-supplied commercial 96% boron with strong crystalline phase and the same 96% boron (B) after ball milling. The effects of the properties of the starting B powder on the superconductivity were evaluated. We observed that samples using ball-milled 96% B, in comparison with the one made from the as-supplied 96% B, were character- ized by small grain size, broadened full width at half maximum (FWHM), and enhanced magnetic critical current density (J(c)). J(c) reached 2 x 10(3) Acm(-2) at 5 K and 8 T. The improved pinning of these samples seems to be caused by enhanced grain boundary pinning at high field.

Effects of different treatments on purity of silica from soluble sodium silicate

Noncrystalline silica was obtained with low iron, sodium, and nitrate ions concentrations from soluble sodium silicate (water glass) and nitric acid solution. Extractions with nitric acid solution and/or deionized water and/or dialysis were carried out to eliminate soluble metal ions. Products were dried in a microwave oven and characterized by chemical analysis, XRD, and IR. Dialysis seems to be the best treatment for the elimination of sodium and nitrate ions. Silica purified by nitric acid and water extractions followed by dialysis yields the purest silica sample.

Conditions giving rise to intense visible room temperature photoluminescence in SrWO4 thin films: the role of disorder

The nature of intense visible photoluminescence at room temperature of SrWO4 (SWO) non-crystalline thin films is discussed in the light of experimental results and theoretical calculations. The SWO thin films were synthesized by the polymeric precursors method. Their structural properties have been obtained by X-ray diffraction data and the corresponding photoluminescence (PL) spectra have been measured. The UV-vis optical spectra measurements suggest the creation of localized states in the disordered structure. The photoluminescence measurements reveal that the PL changes with the degree of disorder in the SWO thin film. To understand the origin of visible PL at room temperature in disordered SWO, we performed quantum-mechanical calculations on crystalline and disordered SWO periodic models. Their electronic structures are analyzed in terms of DOS, hand dispersion and charge densities. We used DFT method with the hybrid non-local B3LYP approximation. The polarization induced by the symmetry break and the existence of localized levels favors the creation of trapped holes and electrons, giving origin to the room temperature photoluminescence phenomenon in the SWO thin films. (c) 2004 Elsevier B.V. All rights reserved.

Effect of boron powder purity on superconducting properties of MgB2

The effect of the properties of starting boron powders on the superconducting properties of MgB2 has been studied. The 92% and 96% pure powders produce lower surface reactivity and larger particle size than the 99% boron powder, as can be seen from Brunauer - Emmett - Teller (BET) and scanning electron microscopy (SEM) results, indicating that the low purity powders cannot be used to archive the same superconducting properties as those of samples made from pure 99% boron powder. However, the purity of 92% and 96% boron powders can be improved by using a simple chemical process, leading to enhanced magnetic critical current densities J(c). From x-ray diffraction (XRD) measurement, oxide impurity has been observed, which might be originated from the B2O3 phase in the boron powders. In order to get high performance MgB2, it is obviously important to control the phase composition and microstructure of amorphous boron starting powders and solid reaction conditions.

A new beta-diketone complex with high color purity

In this work a new europium (III) complex with the following formula NH(4) [Eu(bmdm)(4)] was synthesized and characterized. The bmdm (butyl methoxy-dibenzoyl-methane) is a P-diketone molecule used as UV radiation absorber in sunscreen formulations. Coordination of this ligand to the Eu(3+) ion was confinned by FT-IR, while the Raman spectrum suggests the presence of NH(4)(+) ions. The photoluminescence spectra present narrow lines arising from f-f intra-configurational transitions (5)D(0-)(7)F(0,1,2,3,4), dominated by the hypersensitive (5)D(0)-(7)F(2) transition. In the spectrum recorded at 77 K, all transitions split into 2J + 1 lines suggesting that there is just one symmetry site around Eu(3+) ion. This symmetry is not centrosymmetric. The calculated intensity parameters are ohm(2) = 30.5 x 10(-20) cm(2) and ohm(4) = 5.91 x 10(-20) cm(2) for this complex. The CIE chromaticity coordinates (x = 0.67 and y = 0.32) show a dominant wavelength of 615 nm. The color gamut achieved by this complex is a 100% in the CIE color space. (c) 2005 Elsevier B.V. All rights reserved.

Temperature rise in cavities prepared by high and low torque handpieces and Er : YAG laser

Objective The aim of this study was to compare intrapulpal temperature increases produced by a high-speed high-torque (speed-increasing) handpiece, a high-speed low-torque handpiece (air-turbine) and an Er: YAG (Erbium: Yttrium-Aluminum-Garnet) laser. Subject and methods Thirty bovine incisors were reduced to a dentine thickness of 2.0 mm. Class V preparations were prepared to a depth of 1.5 mm, measured with a caliper or by a mark on the burs. A thermocouple was placed inside the pulp chamber to determine temperature increases (C). Analysis was performed on the following groups (n = 10) treated with: G1, low-torque handpiece; G2, high-torque handpiece; and G3, Er: YAG laser (2.94 mu m at 250 mJ/4 Hz), all with water cooling. The temperature increases were recorded with a computer linked to the thermocouples. Results The data were submitted to ANOVA and Tukey statistical test. The average temperature rises were: 1.92 +/- 0.80 degrees C for G1, 1.34 +/- 0.86 degrees C for G2, and 0.75 +/- 0.39 degrees C for G3. There were significant statistical differences among the groups (p = 0.095). All the groups tested did not have a change of temperature that exceeds the threshold of 5.5 degrees C. Conclusion Temperature response to the low and high torque handpieces seemed to be similar, however the Er: YAG laser generated a lower temperature rise.

Thermal evaporation: Representation of rise in boiling point of grapefruit juice

The rise in boiling point of grapefruit juice was experimentally measured at soluble solids concentrations in the range of 9.3-60.6 °Brix and pressures between °6.0 × 103 and 9.0 × 104 Pa. Different approaches to represent experimental data, including the Dhring's rule, the Antoine equation and empirical models proposed in the literature were tested. In the range of 9.3-29.0 °Brix, the rise in boiling point was nearly independent of pressure, varying only with juice concentration. Considerable deviations of this behavior began to occur at concentrations higher than 29.0 °Brix. Experimental data could be best predicted by adjusting an empirical model, which consisted of a single equation that takes into account the dependence of rise in boiling point on pressure and concentration. © SAGE Publications 2007.