Estudo experimental de wetlands construídos como unidade de polimento no tratamento de lixiviados de aterros sanitários.

A grande quantidade de resíduos sólidos gerados nas cidades é um desafio para o saneamento ambiental no Brasil. A fim de se reduzir os impactos gerados ao meio ambiente e à saúde pública, é necessário que haja um gerenciamento adequado, desde a coleta até a disposição final, desses resíduos sólidos urbanos. Os aterros sanitários permitem um maior controle ambiental, desde que sejam bem projetados e operados. A decomposição da matéria orgânica presente nesses resíduos, somada às águas das chuvas gera o lixiviado, líquido com alto potencial poluidor. Várias formas de tratamento são propostas com a finalidade de tornar o lixiviado menos poluente ao meio ambiente. Wetlands construídos tem se mostrado uma alternativa eficiente para a remoção de poluentes em lixiviados, além dos baixos custos operacionais e de implantação. O presente estudo investigou o uso de wetlands subsuperficiais em escala-piloto para o tratamento de um lixiviado prétratado. Os wetlands foram monitorados com a finalidade de se obter remoções de matéria orgânica e nitrogênio amoniacal. As maiores reduções percentuais de concentração de nitrogênio amoniacal, DQO e COD foram, 91%, 42% e 35%, respectivamente. As maiores reduções percentuais em carga de nitrogênio amoniacal e DQO foram, 67% e 50%, respectivamente. Os resultados dos ensaios de toxicidade realizados com os organismos Vibrio fischeri e Danio rerio revelaram que, a toxicidade do lixiviado foi reduzida ao ser tratado pelo wetland.

Abrasion processes in wear and manufacturing

Abrasion by hard particles is responsible for wear in many practical situations, but can also be used constructively in grinding and polishing processes. A brief overview of abrasion is presented, followed by an historical survey of polishing and a discussion of laboratory abrasion test methods.

Avaliação da eficiência de wetland construído como unidade de polimento de efluente de tratamento secundário de lixiviado por lodos ativados

Uma das dificuldades a ser enfrentada na implantação de aterros sanitários é o tratamento adequado do lixiviado gerado e seu lançamento no meio ambiente dentro dos padrões estabelecidos pela legislação. O potencial poluidor do lixiviado está ligado principalmente aos altos valores de carga orgânica que promove a redução do oxigênio disponível (utilizado na degradação da matéria orgânica) em cursos dágua, prejudicando a fauna e a flora nesses meios. O objetivo do presente trabalho foi avaliar o sistema de tratamento por wetland construído como unidade de polimento do efluente secundário de uma estação de tratamento de lixiviado de aterro de resíduos sólidos urbanos na Região Metropolitana do Rio de Janeiro. Além dos parâmetros coletivos específicos e não específicos, também foram empregados o fracionamento pelo processo de separação por membranas e ensaios de toxicidade aguda. Os resultados mostram que o wetland tem uma ação positiva como unidade de polimento refletida na redução dos parâmetros turbidez (84%), DQO (19%), amônia (30%) e sólidos totais (3%) reduzindo, assim, os impactos ambientais do lançamento do lixiviado. Contudo, a qualidade do efluente final encontra-se acima dos parâmetros de referência de controle ambiental e mostra a necessidade de um efluente secundário de melhor qualidade. Os resultados mostraram também que altos valores de DQO inerte tanto no afluente (85% em média) quanto no efluente (93,5% em média) do wetland indicam que esses lixiviados apresentam natureza refratária confirmada pelos baixos valores de biodegradabilidade no afluente (20,5% em média) e no efluente (5% em média) do wetland. O fracionamento com membranas mostrou que o afluente e o efluente do wetland possuem maiores contribuições de moléculas na fração >1 kDa. Os ensaios de toxicidade com Aliivibrio fischeri mostraram que o afluente e o efluente do wetland possuem toxicidade aguda, sendo a mesma menor na faixa com moléculas menores.

Construção e operação de wetland como polimento de lixiviado de aterro de resíduos sólidos urbanos.

O presente trabalho tem o objetivo de avaliar a metodologia de construção, de plantio, de manutenção, de operação e a eficiência de um sistema de tratamento por wetland construído como etapa de polimento da Estação de Tratamento de Lixiviado (ETC) de Aterro já encerrado de Resíduos Sólidos Urbanos na Região Metropolitana do Rio de Janeiro. Parte do efluente tratado por lodos ativados na ETC foi direcionado e tratado no wetland construído. Foi escolhido o projeto de Fluxo Horizontal Subsuperficial e a vegetação selecionada foi a taboa (Typha latifolia) que é nativa da área do aterro. Em média, foram feitas três amostragens mensais do afluente e do efluente do wetland, de maio a outubro de 2013. A eficiência do sistema foi avaliada por meio de parâmetros físico-químicos e de parâmetros coletivos específicos. A eficiência de remoção de Demanda Química de Oxigênio (DQO) foi de 60%, nitrogênio amoniacal de 67%, nitrito de 72% e nitrato de 57%. Outro parâmetro avaliado foi a toxicidade aguda, foram utilizados os organismos teste Danio rerio (peixe), a Daphnia similis (microcrustáceo) e a Aliivibrio fischeri (bactéria luminescente). Durante o período foram coletados diariamente as vazões de entrada e saída, a condutividade elétrica e o índice pluviométrico. Os resultados mostraram que o uso de wetland como etapa de polimento pode ser uma alternativa para o tratamento de lixiviado.

SOME MEASUREMENTS OF THE PERMEABILITY OF KAOLIN.

This paper reports an experimental investigation of the vertical and horizontal permeabilities of speswhite kaolin clay. The permeabilities were measured using falling head permeability tests. A modification to a conventional oedometer was devised so that either vertical or horizontal permeabilities could be determined. It was found that the vertical and horizontal permeabilities of the clay slurry were similar, but that as the clay was consolidated one dimensionally the anisotropy of the clay fabric resulted in a greater horizontal permeability than the vertical permeability at any void ratio. Both permeabilities were uniquely related to the void ratio.

Some measurements of the permeability of kaolin

The writers wish to present some additional data obtained independently and with different techniques that confirm the results published in the paper. For these tests, the speswhite kaolin clay was prepared as a slurry with a water content of 133 percent and was then consolidated one-dimensionally under an axial stress of 100 kPa in a 203 mm dia. tube. The results presented here show that the anisotropy of permeability is completely preserved (even after the sample is compressed isotropical) as long as the initial part of the stress path corresponds to one-dimensional compression. The data supports the speculation by the authors regarding permeability anisotropy for stress paths other than one-dimensional compression.

Grain boundaries in multi-seeded melt-grown superconductors

Future applications of high temperature superconductors require bulk materials of a complex shape. The multi-seeded-melt-growth process (MSMG) represents a promising technique for obtaining qualitatively well oriented bulk materials with different kinds of shape. In the MSMG process, several seeds are placed on a precursor pellet, from which the growth of the bulk starts. A certain problem of the MSMG process is that grain boundaries become inevitable when the growth fronts of two neighboring seeds collide. These grain boundaries are responsible for a reduction of the critical currents and pose a problem for high current applications. By polishing the sample step by step, the influence of the grain boundaries was investigated by scanning Hall probe measurements and by the magnetoscan technique. Additionally, optical microscopy and electron microscopy were employed to investigate the details of the microstructure. © 2005 IEEE.

Materials science: The ultrasmoothness of diamond-like carbon surfaces

The ultrasmoothness of diamond-like carbon coatings is explained by an atomistic/continuum multiscale model. At the atomic scale, carbon ion impacts induce downhill currents in the top layer of a growing film. At the continuum scale, these currents cause a rapid smoothing of initially rough substrates by erosion of hills into neighboring hollows. The predicted surface evolution is in excellent agreement with atomic force microscopy measurements. This mechanism is general, as shown by similar simulations for amorphous silicon. It explains the recently reported smoothing of multilayers and amorphous transition metal oxide films and underlines the general importance of impact-induced downhill currents for ion deposition, polishing, and nanopattering.

Chromosomal rearrangements underlying karyotype differences between Chinese pangolin (Manis pentadactyla) and Malayan pangolin (Manis javanica) revealed by chromosome painting

The Chinese pangolin (Manis pentadactyla), a representative species of the order Pholidota, has been enlisted in the mammalian whole-genome sequencing project mainly because of its phylogenetic importance. Previous studies showed that the diploid number o

Durability study of eleven years old cement-bentonite cut-off wall material

Comprehensive understanding of the long-term performance of cement-bentonite slurry trench cut-off walls is essential as these mixes may degrade when exposed to aggressive environments or when subjected to prolonged drying. A series of wetting-drying and immersion experiments was carried out to evaluate the durability characteristics of laboratory mixed samples and block field samples from 40 days to 11 years of age. For the wetting-drying tests, the samples buried in medium graded sand were subjected to periodical flooding and drying cycles. They were then used for permeability testing and unconfined compressive strength (UCS) testing. For the immersion tests, the samples confined in perforated molds were submerged in magnesium sulfate solution for 16 weeks and their microstructures were then analyzed using X-ray diffraction (XRD) technique. This paper identifies the effects of contaminant exposure on durability of cement-bentonite and the effects of aging by comparing 11 years old samples to younger samples. Test results showed that young or previously contaminated cement-bentonite mixes are more susceptible to sulfate attack than old or less contaminated mixes. Copyright ASCE 2008.

Molecular and functional characterization of a c-type lysozyme from the Asian corn borer, Ostrinia furnacalis

Some lepidopteran lysozymes have been reported to display activity against Gram-positive and Gram-negative bacteria, in contrast to most lysozymes that are active only against Gram-positive bacteria. OstrinLysC, a c-type lysozyme, was purified from the As

The microstructure and mechanical properties of ball-milled stainless steel powder: The effect of hot-pressing vs. laser sintering

The microstructure and mechanical properties of sintered stainless steel powder, of composition AISI 420, have been measured. Ball-milled powder comprising nanoscale grains was sintered to bulk specimens by two alternative routes: hot-pressing and microlaser sintering. The laser-sintered alloy has a porosity of 6% and comprises a mixture of delta ferrite and tempered martensite, and the relative volume fraction varies along the axis of the specimen due to a thermal cycle that evolves with progressive deposition. In contrast, the hot-pressed alloy has a porosity of 0.7% and exhibits a martensitic lath structure with carbide particles at the boundaries of the prior austenite grains. These differences in microstructure lead to significant differences in mechanical properties. For example, the uniaxial tensile strength of the hot-pressed material is one-half of its compressive strength, due to void initiation at the carbide particles at the prior austenite grain boundaries. Nanoindentation measurements reveal a size effect in hardness and also reveal the sensitivity of hardness to the presence of mechanical polishing and electropolishing. © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Flow of wet powder in a conical centrifugal filter-an analytical model

A one-dimensional analytical model is developed for the steady state, axisymmetric, slender flow of saturated powder in a rotating perforated cone. Both the powder and the fluid spin with the cone with negligible slip in the hoop direction. They migrate up the wall of the cone along a generator under centrifugal force, which also forces the fluid out of the cone through the powder layer and the porous wall. The flow thus evolves from an over-saturated paste at inlet into a nearly dry powder at outlet. The powder is treated as a Mohr-Coulomb granular solid of constant void fraction and permeability. The shear traction at the wall is assumed to be velocity and pressure dependent. The fluid is treated as Newtonian viscous. The model provides the position of the colour line (the transition from over- to under-saturation) and the flow velocity and thickness profiles over the cone. Surface tension effects are assumed negligible compared to the centrifugal acceleration. Two alternative conditions are considered for the flow structure at inlet: fully settled powder at inlet, and progressive settling of an initially homogeneous slurry. The position of the colour line is found to be similar for these two cases over a wide range of operating conditions. Dominant dimensionless groups are identified which control the position of the colour line in a continuous conical centrifuge. Experimental observations of centrifuges used in the sugar industry provide preliminary validation of the model. © 2011 Elsevier Ltd.

Water soluble nitrogenous component from squilla (Orato squilla nepa)

A water soluble hygroscopic powder has been isolated from squilla in good yield, ranging from 3.5 to 5.0% of the fresh raw material, by a simple direct method. The process consists of homogenising squilla with an equal quantity of water, removal of chitinous matter from the slurry by filtration, heating the filtrate at 0.7 kg/sq.cm steam pressure for 15-20 minutes, removal of the precipitated protein by filtration and concentration and final drying in vacuum of the filtered cooled liquor. The pale brown powder so obtained consists mainly of peptones and proteoses and has been found to be comparable to BDH peptone for growth of bacteria, ability to serve as source for tryptophan for indole production and to provide substrate for the production of hydrogen sulphide. Comparative studies have been made on similar water soluble fractions from two species of prawns, namely, Metapenaeus affinis and Parapenaeopsis stylifera.

High temperature robust SOI ethanol sensor

In this paper we present a robust SOI-CMOS ethanol sensor based on a tungsten-doped lanthanum iron oxide sensing material. The device shows response to gas, has low power consumption, good uniformity, high temperature stability and can be manufactured at low cost and with integrated circuitry. The platform is a tungsten-based CMOS micro-hotplate that has been shown to be stable for over two thousand hours at a high temperature (600°C) in a form of accelerated life test. The tungsten-doped lanthanum iron oxide was deposited on the micro-hotplate as a slurry with terpineol using a syringe, dried and annealed. Preliminary gas testing was done and the material shows response to ethanol vapour. These results are promising and we believe that this combination of a robust CMOS micro-hotplate and a good sensing material can form the basis for a commercial CMOS gas sensor. © 2011 Published by Elsevier Ltd.