Tubular Urinary Enzymes in Acute Post-infectious Glomerulonephritis

Tubular function of 17 pediatric patients with a mild form of acute post-infectious glomerulonephritis was prospectively evaluated by assessment of the urinary activity of proximal and distal tubule enzymes. Neutral-like endopeptidase (NEP-like) and angiotensin-converting enzyme (ACE) were the proximal tubule enzymes assessed, while prolyl-endopeptidase (PE) and serine-endopeptidase H1 and H2 were the distal tubule enzymes analyzed. Urine was collected at diagnosis (T0) and after 2 (T2) and 6 (T6) months of follow-up. NEP-like enzyme activity (nmol/mg creatinine; median±quartile range) was increased at diagnosis, and this remained stable during the first 6 months (T0 18.30±83.26, T2 17.32±49.56, T6 23.38±107.18). Urinary activity of the other enzymes was as follows: ACE (mU/ml per mg creatinine) T0 0.08±0.16, T2 0.06±0.10, T6 0.18±0.29; PE (nmol/mg creatinine) T0 6.70±84.87, T2 9.55±69.00, T6 13.67±28.70; serine-endopeptidase H1 (nmol/mg creatinine) T0 7.86±26.95, T2 17.17±59.37, T6 18.19± 79.14; and serine-thiol-endopeptidase H2 (nmol/mg creatinine) T0 3.06±21.97, T2 12.06±32.42, T6 16.22± 44.06. Thirty other healthy children matched for age and gender were considered as a control group. This group was assessed once and the results were: NEP-like activity 6.05±10.54, ACE 0.11±0.22, PE 7.10±13.36, H1 5.00±17.30, and H2 6.00±20.16. In conclusion, we observed that NEP-like and H1 enzymes exhibited significant increased urinary activity 6 months after the diagnosis. This increase occurred in spite of the disappearance of clinical symptoms, which occurred 2 months after the diagnosis. We believe that the increase in urinary enzymatic activity could be a manifestation of a silent tubular dysfunction following an episode of acute post-infectious glomerulonephritis.

On tubular neighborhoods of piecewise linear and topological manifolds.

Analogues of the smooth tubular neighborhood theorem are developed for the topological and piecewise linear categories.

A novel Compound Elliptical-type Concentrator for parabolic primaries with tubular receiver

The Parabolic Trough (PT) is the most used concentrator in CSP (Concentrated Solar Power). However, this concentrator technology is facing a significant challenge to increase its overall efficiency and cost-effectiveness. Meanwhile, other low-cost solutions such as Fresnel concentrators are also being perceived as potentially attractive. In order to achieve the lower cost goal, new optical solutions can be considered, in parallel with improvements coming, for instance, through the use of new materials or manufacturing solutions. But conventional PTs can still be improved to yield, for instance, higher concentration values, a possible starting point for higher conversion efficiency. These new solutions, in turn, can also be useful for other technologies and applications (Fresnel Concentrators, Central Tower Receivers, etc.). However it is easier to develop and test these solutions in conjunction with parabolic primaries (continuum primary). And that is the topic of this paper: to present a new Compound Elliptical-type Concentrator for a parabolic primary with a tubular receiver. A comparison is made between this new concentrator and two other concentrators (a conventional PT concentrator and a XX SMS (Simultaneous Multiple Surface) concentrator), as well as a calculation of the total amount of collected energy (kW h) for a particular location, Faro (Portugal). The paper ends with a discussion of the results obtained, their impact and possible applications in the future.

Avaliação da incorporação combinada dos resíduos de cascalho de perfuração de poço de petróleo e de polimento do porcelanato em cerâmica vermelha

Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation, as in the production of concrete and mortar for the construction, for example, but each one in an isolated way. In this research, the aim is to study the combined incorporation of the waste drill cuttings of oil well and the residue of the polishing of porcelain, generated in the final stage of finishing of this product in a clay matrix, for the production of red pottery, specifically bricks, ceramic blocks and tiles. The clay comes from the municipality of São Gonçalo, RN, the drilling waste is from the Natal basin, in Rio Grande do Norte, and the residue of the polishing proceeds from a ceramic porcelain of the State of Paraíba. For this purpose, we used a mixture of a plastic clay with a non-plastic, in a ratio of 50% each, settling formulations with the addition of these two residues in this clay matrix. In the formulations, both residues were incorporated with a minimum percentage of 2.5% and maximum of 12.5%, varying from 2.5% each, in each formulation, which the sum of the waste be no more than 15%. It should be noted that the residue of the polishing of ceramic porcelain is a IIa class (not inert). The materials were characterized by XRF, XRD, TG, DTA, laser granulometry and the plasticity index. The technological properties of water absorption, apparent porosity, linear shrinkage of burning, flexural tensile strength and bulk density were evaluated after the sintering of the pieces to 850 °C, 950 °C and 1050 °C, with a burning time of 3 hr, 3 hr and 30 minutes, and 3 hr and 50 minutes, respectively, with a heating rate of 10 °C/minute, for all formulations and landing of 30 minutes. To better understand the influence of each residue and temperature on the evaluated properties, we used the factorial planning and its surfaces of response for the interpretation of the results. It was found that the temperature has no statistical significance at a 95% of reliability level in flexural tensile strength and that it decreases the water absorption and the porosity, but increases the shrinkage and the bulk density. The results showed the feasibility of the desired incorporation, but adjusting the temperature to each product and formulation, and that the temperatures of 850 °C and 950 °C were the one that responded to the largest number of formulations

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Estudo do acoplamento do poço injetor nas simulações de injeção cíclica de vapor

Steam injection is a method usually applied to very viscous oils and consists of injecting heat to reduce the viscosity and, therefore, increase the oil mobility, improving the oil production. For designing a steam injection project it is necessary to have a reservoir simulation in order to define the various parameters necessary for an efficient heat reservoir management, and with this, improve the recovery factor of the reservoir. The purpose of this work is to show the influence of the coupled wellbore/reservoir on the thermal simulation of reservoirs under cyclic steam stimulation. In this study, the methodology used in the solution of the problem involved the development of a wellbore model for the integration of steam flow model in injection wellbores, VapMec, and a blackoil reservoir model for the injection of cyclic steam in oil reservoirs. Thus, case studies were developed for shallow and deep reservoirs, whereas the usual configurations of injector well existing in the oil industry, i.e., conventional tubing without packer, conventional tubing with packer and insulated tubing with packer. A comparative study of the injection and production parameters was performed, always considering the same operational conditions, for the two simulation models, non-coupled and a coupled model. It was observed that the results are very similar for the specified well injection rate, whereas significant differences for the specified well pressure. Finally, on the basis of computational experiments, it was concluded that the influence of the coupled wellbore/reservoir in thermal simulations using cyclic steam injection as an enhanced oil recovery method is greater for the specified well pressure, while for the specified well injection rate, the steam flow model for the injector well and the reservoir may be simulated in a non- coupled way

Tubular and Sector Heat Pipes with Interconnected Branches for Gas Turbine and/or Compressor Cooling

Designing turbines for either aerospace or power production is a daunting task for any heat transfer scientist or engineer. Turbine designers are continuously pursuing better ways to convert the stored chemical energy in the fuel into useful work with maximum efficiency. Based on thermodynamic principles, one way to improve thermal efficiency is to increase the turbine inlet pressure and temperature. Generally, the inlet temperature may exceed the capabilities of standard materials for safe and long-life operation of the turbine. Next generation propulsion systems, whether for new supersonic transport or for improving existing aviation transport, will require more aggressive cooling system for many hot-gas-path components of the turbine. Heat pipe technology offers a possible cooling technique for the structures exposed to the high heat fluxes. Hence, the objective of this dissertation is to develop new radially rotating heat pipe systems that integrate multiple rotating miniature heat pipes with a common reservoir for a more effective and practical solution to turbine or compressor cooling. In this dissertation, two radially rotating miniature heat pipes and two sector heat pipes are analyzed and studied by utilizing suitable fluid flow and heat transfer modeling along with experimental tests. Analytical solutions for the film thickness and the lengthwise vapor temperature distribution for a single heat pipe are derived. Experimental tests on single radially rotating miniature heat pipes and sector heat pipes are undertaken with different important parameters and the manner in which these parameters affect heat pipe operation. Analytical and experimental studies have proven that the radially rotating miniature heat pipes have an incredibly high effective thermal conductance and an enormous heat transfer capability. Concurrently, the heat pipe has an uncomplicated structure and relatively low manufacturing costs. The heat pipe can also resist strong vibrations and is well suited for a high temperature environment. Hence, the heat pipes with a common reservoir make incorporation of heat pipes into turbo-machinery much more feasible and cost effective.

Formação de pomar de laranjeira 'pera' em combinação com diferentes porta-enxertos no município de Capitão Poço - PA.

Em 2015, o Estado do Pará inseriu-se na rede nacional de avaliação de variedades portaenxerto selecionadas pelo Programa de Melhoramento Genético de Citros da Embrapa Mandioca e Fruticultura - PMG Citros. Essas variedades têm como ênfase principal a tolerância à seca e o controle do huanglongbing (HLB, ex-greening). No Município de Capitão Poço, em parceria com citricultores, foram instalados os primeiros ensaios. Este trabalho avaliou, na Fazenda Ornela, a formação de um pomar de laranjeira 'pera' em combinação com seis porta-enxertos: limoeiro 'cravo santa cruz', tangerineira 'Sunki tropical' citrandaris 'riverside' e 'san diego', híbridos LVK x LCR - 010 e TSKC x CTSW - 033. O experimento foi disposto em blocos casualizados, onde cada porta-enxerto foi um tratamento, com quatro repetições e dez plantas por parcela experimental. Diante dos resultados obtidos das análises biométricas dos dois primeiros anos de desenvolvimento, pode-se afirmar que o citrandaris 'riverside' vem se destacando como porta-enxerto para laranjeira 'pera'.

O CLIMA E OS ASPECTOS ECONÔMICOS DA AGRICULTURA DO MUNICÍPIO DE POÇO VERDE/SE

A compreensão da Agricultura não é feita somente levando-se em consideração os aspectos técnicos de sua formação. Faz-se importante observar que tais aspectos estão vinculados aos elementos externos que influenciam diretamente no seu desenvolvimento, alterando, muitas vezes, os resultados finais. É assim que o clima aparece como elemento indispensável na agricultura. O cerne desta pesquisa pauta-se na análise do clima na atividade agrícola em escala têmporo-espacial no município de Poço Verde-Se Brasil. METODOLOGIA. A elaboração se estabeleceu a partir de um levantamento bibliográfico e pesquisa de campo que auxiliaram como embasamento teórico. RESULTADOS E DISCUSSÕES: Nota-se que o meio ecológico é um fator importante para o crescimento da lavoura, além dos fatores econômicos. Embora existam outros fatores como a genética, a irrigação, a hidroponia, porém não é uma realidade do município. As doenças e pragas prejudicam o desenvolvimento das lavouras e causam danos econômicos aos agricultores. A falta de capital suficiente é um dos problemas no setor agrícola deste município. Apresenta áreas com técnicas tradicionais de produção, mas também existem propriedades desenvolvendo agricultura industrializada. Conclui-se que é preciso de melhorias em fornecimento agrícolas, planejamento de zoneamento e irrigação, que possibilitaria uma melhoria socioeconômica aos agricultores.

Stress Concentration Factor and Fatigue Life Evaluation in offshore tubular KT-Joints

In the last few decades, offshore field has grown fast especially after the notable development of technologies, explorations of oil and gas in deep water and the high concern of offshore companies in renewable energy mainly Wind Energy. Fatigue damage was noticed as one of the main problems causing failure of offshore structures. The purpose of this research is to focus on the evaluation of Stress Concentration Factor and its influence on Fatigue Life for 2 tubular KT-Joints in offshore Jacket structure using different calculation methods. The work is done by using analytical calculations, mainly Efthymiou’s formulations, and numerical solutions, FEM analysis, using ABAQUS software. As for the analytical formulations, the calculations were done according to the geometrical parameters of each method using excel sheets. As for the numerical model, 2 different types of tubular KT-Joints are present where for each model 5 shell element type, 3 solid element type and 3 solid-with-weld element type models were built on ABAQUS. Meshing was assigned according to International Institute of Welding (IIW) recommendations, 5 types of mesh element, to evaluate the Hot-spot stresses. 23 different types of unitary loading conditions were assigned, 9 axial, 7 in-plane bending moment and 7 out-plane bending moment loads. The extraction of Hot-spot stresses and the evaluation of the Stress Concentration Factor were done using PYTHON scripting and MATLAB. Then, the fatigue damage evaluation for a critical KT tubular joint based on Simplified Fatigue Damage Rule and Local Approaches (Strain Damage Parameter and Stress Damage Parameter) methods were calculated according to the maximum Stress Concentration Factor conducted from DNV and FEA methods. In conclusion, this research helped us to compare different results of Stress Concentration Factor and Fatigue Life using different methods and provided us with a general overview about what to study next in the future.

Chemo-physical and biological mechanisms behind the anticancer activity of plasma activated Ringer's Lactate solution for the treatment of peritoneal carcinosis from primitive epithelial ovarian/tubular tumor

Cancer research and development of targeting agents in this field is based on robust studies using preclinical models. The failure rate of standardized treatment approaches for several solid tumors has led to the urgent need to fine-tune more sophisticated and faithful preclinical models able to recapitulate the features of in vivo human tumors, with the final aim to shed light on new potential therapeutic targets. Epithelial Ovarian Cancer (EOC) serous histotype (HGSOC) is one of the most lethal diseases in women due to its high aggressiveness (75% of patients diagnosed at FIGO III-IV state) and poor prognosis (less of 50% in 5 years), whose therapy often fails as chemoresistance sets in. This thesis aimed at using the novel perfusion-based bioreactor U-CUP that provides direct perfusion throughout the tumor tissue seeking to obtain an EOC 3D ex vivo model able to recapitulate the features of the original tumor including the tumor microenvironment and maintaining its cellular heterogeneity. Moreover, we optimized this approach so that it can be successfully applied to slow-frozen tumoral tissues, further extending the usefulness of this tool. We also investigated the effectiveness of Plasma Activated Ringer’s Lactate solution (PA-RL) against Epithelial Ovarian Cancer (EOC) serous histotype in both 2D and 3D cultures using ex-vivo specimens from HGSOC patients. We propose PA-RL as a novel therapy with local intraperitoneal administration, which could act on primary or metastatic ovarian tumors inducing a specific cancer cell death with reduced damage on the surrounding healthy tissues.

Avaliação da função tubular

Este material compõe o Curso de Especialização em Nefrologia Multidisciplinar (Unidade 1, Módulo 4), produzido pela UNA-SUS/UFMA. Trata-se de um recurso educacional interativo que apresenta como uma simples urinálise pode detectar uma lesão tubular, através da presença de glicosúria, do ph urinário e da densidade urinária.

Melhoria da atenção à saúde dos hipertensos e diabéticos da Unidade Básica de Saúde ESF II, Poço Branco-RN

A intervenção ocorreu na Unidade de Saúde da Família denominada ESF II, no bairro Conjunto Novos Tempos, Município de Poço Branco, Rio Grande do Norte, entre outubro a dezembro de 2014, com o objetivo de melhorar a atenção à saúde dos hipertensos e diabéticos. A partir do diagnóstico situacional dessa unidade, identificou-se maior necessidade de realizar a intervenção nessa ação programática. Implementamos ações incluídas no projeto de intervenção que refletissem na melhoria da qualidade da saúde dos usuários adstritos. Seu monitoramento ocorreu semanalmente, com coleta e preenchimento de dados nas planilhas e fichas-espelho a fim de garantir melhor registro. Realizamos a capacitação da equipe, atualizando-a, discutindo-a as patologias e determinando sua atuação profissional nesse período. Fizemos busca ativa dos usuários faltosos, garantindo os princípios de equidade e universalidade. Antes da intervenção, a cobertura dos hipertensos e diabéticos apresentava-se 83 (34,2 %) e 20 (39%), respectivamente. Após intervenção, a cobertura desses usuários foi de 178 (73,6%) e 44 (84,6%), respectivamente. Alcançamos 100% na maioria dos indicadores de qualidade nos quatro eixos temáticos: organização do serviço, monitoramento e avaliação, engajamento público e qualificação da prática clínica. Avaliamos garantia do exame físico adequado, com realização do exame do pé diabético e o cálculo do risco cardiovascular de cada usuário assistido. Cada consulta era registrada na ficha espelho, bem como seu acompanhamento, exames complementares e medicações. Em geral, consideramos a intervenção com resultado positivo, pois garantiu a melhoria da atenção à saúde dos hipertensos e diabéticos, alcance das metas preconizadas no projeto e implementação do Telessaúde, com inclusão do eletrocardiograma. A maior dificuldade enfrentada nesse período foi a realização dos exames complementares, conforme recomendação do protocolo do Ministério da Saúde, pois, o laboratório municipal, além de não realizar alguns exames como microalbuminúria, enviava-os com atraso. Acreditamos que a equipe, a gestão municipal e a comunidade entenderam os benefícios das ações e que elas serão incorporadas a rotina da ESF II, em Poço Branco – RN.