Econometrics as an Academic Discipline in Higher Education: An Exploratory Study of the Need, Relevance and Significance

Econometrics is a young science. It developed during the twentieth century in the mid-1930’s, primarily after the World War II. Econometrics is the unification of statistical analysis, economic theory and mathematics. The history of econometrics can be traced to the use of statistical and mathematics analysis in economics. The most prominent contributions during the initial period can be seen in the works of Tinbergen and Frisch, and also that of Haavelmo in the 1940's through the mid 1950's. Right from the rudimentary application of statistics to economic data, like the use of laws of error through the development of least squares by Legendre, Laplace, and Gauss, the discipline of econometrics has later on witnessed the applied works done by Edge worth and Mitchell. A very significant mile stone in its evolution has been the work of Tinbergen, Frisch, and Haavelmo in their development of multiple regression and correlation analysis. They used these techniques to test different economic theories using time series data. In spite of the fact that some predictions based on econometric methodology might have gone wrong, the sound scientific nature of the discipline cannot be ignored by anyone. This is reflected in the economic rationale underlying any econometric model, statistical and mathematical reasoning for the various inferences drawn etc. The relevance of econometrics as an academic discipline assumes high significance in the above context. Because of the inter-disciplinary nature of econometrics (which is a unification of Economics, Statistics and Mathematics), the subject can be taught at all these broad areas, not-withstanding the fact that most often Economics students alone are offered this subject as those of other disciplines might not have adequate Economics background to understand the subject. In fact, even for technical courses (like Engineering), business management courses (like MBA), professional accountancy courses etc. econometrics is quite relevant. More relevant is the case of research students of various social sciences, commerce and management. In the ongoing scenario of globalization and economic deregulation, there is the need to give added thrust to the academic discipline of econometrics in higher education, across various social science streams, commerce, management, professional accountancy etc. Accordingly, the analytical ability of the students can be sharpened and their ability to look into the socio-economic problems with a mathematical approach can be improved, and enabling them to derive scientific inferences and solutions to such problems. The utmost significance of hands-own practical training on the use of computer-based econometric packages, especially at the post-graduate and research levels need to be pointed out here. Mere learning of the econometric methodology or the underlying theories alone would not have much practical utility for the students in their future career, whether in academics, industry, or in practice This paper seeks to trace the historical development of econometrics and study the current status of econometrics as an academic discipline in higher education. Besides, the paper looks into the problems faced by the teachers in teaching econometrics, and those of students in learning the subject including effective application of the methodology in real life situations. Accordingly, the paper offers some meaningful suggestions for effective teaching of econometrics in higher education

Thermoaktive Bauteilsysteme - Ein neuer simulationstechnischer Berechnungsansatz

Thermoaktive Bauteilsysteme sind Bauteile, die als Teil der Raumumschließungsflächen über ein integriertes Rohrsystem mit einem Heiz- oder Kühlmedium beaufschlagt werden können und so die Beheizung oder Kühlung des Raumes ermöglichen. Die Konstruktionenvielfalt reicht nach diesem Verständnis von Heiz, bzw. Kühldecken über Geschoßtrenndecken mit kern-integrierten Rohren bis hin zu den Fußbodenheizungen. Die darin enthaltenen extrem trägen Systeme werden bewußt eingesetzt, um Energieangebot und Raumenergiebedarf unter dem Aspekt der rationellen Energieanwendung zeitlich zu entkoppeln, z. B. aktive Bauteilkühlung in der Nacht, passive Raumkühlung über das kühle Bauteil am Tage. Gebäude- und Anlagenkonzepte, die träge reagierende thermoaktive Bauteilsysteme vorsehen, setzen im kompetenten und verantwortungsvollen Planungsprozeß den Einsatz moderner Gebäudesimulationswerkzeuge voraus, um fundierte Aussagen über Behaglichkeit und Energiebedarf treffen zu können. Die thermoaktiven Bauteilsysteme werden innerhalb dieser Werkzeuge durch Berechnungskomponenten repräsentiert, die auf mathematisch-physikalischen Modellen basieren und zur Lösung des bauteilimmanenten mehrdimensionalen instationären Wärmeleitungsproblems dienen. Bisher standen hierfür zwei unterschiedliche prinzipielle Vorgehensweisen zur Lösung zur Verfügung, die der physikalischen Modellbildung entstammen und Grenzen bzgl. abbildbarer Geometrie oder Rechengeschwindigkeit setzen. Die vorliegende Arbeit dokumentiert eine neue Herangehensweise, die als experimentelle Modellbildung bezeichnet wird. Über den Weg der Systemidentifikation können aus experimentell ermittelten Datenreihen die Parameter für ein kompaktes Black-Box-Modell bestimmt werden, das das Eingangs-Ausgangsverhalten des zugehörigen beliebig aufgebauten thermoaktiven Bauteils mit hinreichender Genauigkeit widergibt. Die Meßdatenreihen lassen sich über hochgenaue Berechnungen generieren, die auf Grund ihrer Detailtreue für den unmittelbaren Einsatz in der Gebäudesimulation ungeeignet wären. Die Anwendung der Systemidentifikation auf das zweidimensionale Wärmeleitungsproblem und der Nachweis ihrer Eignung wird an Hand von sechs sehr unterschiedlichen Aufbauten thermoaktiver Bauteilsysteme durchgeführt und bestätigt sehr geringe Temperatur- und Energiebilanzfehler. Vergleiche zwischen via Systemidentifikation ermittelten Black-Box-Modellen und physikalischen Modellen für zwei Fußbodenkonstruktionen zeigen, daß erstgenannte auch als Referenz für Genauigkeitsabschätzungen herangezogen werden können. Die Praktikabilität des neuen Modellierungsansatzes wird an Fallstudien demonstriert, die Ganzjahressimulationen unter Bauteil- und Betriebsvariationen an einem exemplarischen Büroraum betreffen. Dazu erfolgt die Integration des Black-Box-Modells in das kommerzielle Gebäude- und Anlagensimulationsprogramm CARNOT. Die akzeptablen Rechenzeiten für ein Einzonen-Gebäudemodell in Verbindung mit den hohen Genauigkeiten bescheinigen die Eignung der neuen Modellierungsweise.

Gröbnerbasen in Ore-Algebren

In dieser Arbeit werden grundlegende Algorithmen für Ore-Algebren in Mathematica realisiert. Dabei entsteht eine Plattform um die speziellen Beschränkungen und Möglichkeiten dieser Algebren insbesondere im Zusammenhang mit Gröbnerbasen an praktischen Beispielen auszuloten. Im Gegensatz zu den existierenden Paketen wird dabei explizit die Struktur der Ore-Algebra benutzt. Kandri-Rody und Weispfenning untersuchten 1990 Verallgemeinerungen von Gröbnerbasen auf Algebren ordnungserhaltender Art (``algebras of solvable type''). Diese verhalten sich so, dass Buchbergers Algorithmus stets eine Gröbnerbasis findet. Es wird ein Beispiel gezeigt, an dem klar wird, dass es mehr Ore-Algebren ordnungserhaltender Art gibt als die in der Literatur stets betrachteten Operator-Algebren. Für Ore-Algebren ordnungserhaltender Art werden Algorithmen zu Gröbnerbasen implementiert. Anschließend wird der Gröbner-Walk für Ore-Algebren untersucht. Der Gröbner-Walk im kommutativen Fall wird mit einem instruktiven Beispiel vorgestellt. Dann wird zum nichtkommutativen Fall übergegangen. Es wird gezeigt, dass die Eigenschaft ordnungserhaltender Art zu sein, auf der Strecke zwischen zwei Ordnungen erhalten bleibt. Eine leichte Modifikation des Walks für Ore-Algebren wird implementiert, die im Erfolgsfall die Basis konvertiert und ansonsten abbricht. Es werden Beispiele angegeben, in denen der modifizierte Walk funktioniert sowie ein Beispiel analysiert, in dem er versagt.

Semi-algebraic methods for symbolic analysis of complex reaction networks

The identification of chemical mechanism that can exhibit oscillatory phenomena in reaction networks are currently of intense interest. In particular, the parametric question of the existence of Hopf bifurcations has gained increasing popularity due to its relation to the oscillatory behavior around the fixed points. However, the detection of oscillations in high-dimensional systems and systems with constraints by the available symbolic methods has proven to be difficult. The development of new efficient methods are therefore required to tackle the complexity caused by the high-dimensionality and non-linearity of these systems. In this thesis, we mainly present efficient algorithmic methods to detect Hopf bifurcation fixed points in (bio)-chemical reaction networks with symbolic rate constants, thereby yielding information about their oscillatory behavior of the networks. The methods use the representations of the systems on convex coordinates that arise from stoichiometric network analysis. One of the methods called HoCoQ reduces the problem of determining the existence of Hopf bifurcation fixed points to a first-order formula over the ordered field of the reals that can then be solved using computational-logic packages. The second method called HoCaT uses ideas from tropical geometry to formulate a more efficient method that is incomplete in theory but worked very well for the attempted high-dimensional models involving more than 20 chemical species. The instability of reaction networks may lead to the oscillatory behaviour. Therefore, we investigate some criterions for their stability using convex coordinates and quantifier elimination techniques. We also study Muldowney's extension of the classical Bendixson-Dulac criterion for excluding periodic orbits to higher dimensions for polynomial vector fields and we discuss the use of simple conservation constraints and the use of parametric constraints for describing simple convex polytopes on which periodic orbits can be excluded by Muldowney's criteria. All developed algorithms have been integrated into a common software framework called PoCaB (platform to explore bio- chemical reaction networks by algebraic methods) allowing for automated computation workflows from the problem descriptions. PoCaB also contains a database for the algebraic entities computed from the models of chemical reaction networks.

Enlarging a training set for genomic selction by imputation of un-genotyped animals in populations of varying genetic architecture

Background: The most common application of imputation is to infer genotypes of a high-density panel of markers on animals that are genotyped for a low-density panel. However, the increase in accuracy of genomic predictions resulting from an increase in the number of markers tends to reach a plateau beyond a certain density. Another application of imputation is to increase the size of the training set with un-genotyped animals. This strategy can be particularly successful when a set of closely related individuals are genotyped. ----- Methods: Imputation on completely un-genotyped dams was performed using known genotypes from the sire of each dam, one offspring and the offspring’s sire. Two methods were applied based on either allele or haplotype frequencies to infer genotypes at ambiguous loci. Results of these methods and of two available software packages were compared. Quality of imputation under different population structures was assessed. The impact of using imputed dams to enlarge training sets on the accuracy of genomic predictions was evaluated for different populations, heritabilities and sizes of training sets. ----- Results: Imputation accuracy ranged from 0.52 to 0.93 depending on the population structure and the method used. The method that used allele frequencies performed better than the method based on haplotype frequencies. Accuracy of imputation was higher for populations with higher levels of linkage disequilibrium and with larger proportions of markers with more extreme allele frequencies. Inclusion of imputed dams in the training set increased the accuracy of genomic predictions. Gains in accuracy ranged from close to zero to 37.14%, depending on the simulated scenario. Generally, the larger the accuracy already obtained with the genotyped training set, the lower the increase in accuracy achieved by adding imputed dams. ----- Conclusions: Whenever a reference population resembling the family configuration considered here is available, imputation can be used to achieve an extra increase in accuracy of genomic predictions by enlarging the training set with completely un-genotyped dams. This strategy was shown to be particularly useful for populations with lower levels of linkage disequilibrium, for genomic selection on traits with low heritability, and for species or breeds for which the size of the reference population is limited.

Information needs for a purchase of fairtrade coffee

This research investigates what information German Fairtrade coffee consumers search for during pre-purchase information seeking and to what extent information is retrieved. Furthermore, the sequence of the information search as well as the degree of cognitive involvement is highlighted. The role of labeling, the importance of additional ethical information and its quality in terms of concreteness as well as the importance of product price and organic origin are addressed. A set of information relevant to Fairtrade consumers was tested by means of the Information Display Matrix (IDM) method with 389 Fairtrade consumers. Results show that prior to purchase, information on product packages plays an important role and is retrieved rather extensively, but search strategies that reduce the information processing effort are applied as well. Furthermore, general information is preferred over specific information. Results of two regression analyses indicate that purchase decisions are related to search behavior variables rather than to socio-demographic variables and purchase motives. In order to match product information with consumers’ needs, marketers should offer information that is reduced to the central aspects of Fairtrade.

Facilitating Mechanical Design with Augmented Reality

By enhancing a real scene with computer generated objects, Augmented Reality (AR), has proven itself as a valuable Human-Computer Interface (HCI) in numerous application areas such as medical, military, entertainment and manufacturing. It enables higher performance of on-site tasks with seamless presentation of up-to-date, task-related information to the users during the operation. AR has potentials in design because the current interface provided by Computer-aided Design (CAD) packages is less intuitive and reports show that the presence of physical objects help design thinking and communication. This research explores the use of AR to improve the efficiency of a design process, specifically in mechanical design.

Whither Japan's Economy?

The Japanese economy entered a long recession in spring 1997. Its economic growth has been much lower than in the US and the EU despite large fiscal stimulus packages, a monetary policy which has brought interest rates to zero since 1999, injections of public money to recapitalize banks, and programs of liberalization and deregulation. How could all these policies have failed to bring the Japanese economy back on a sustainable growth path? This paper argues that the failure of Japan's efforts to restore a sound economic environment is the result of having deliberately chosen inappropriate and inadequate monetary and fiscal instruments to tackle the macroeconomic and structural problems that have burdened the Japanese economy since the burst of the financial bubble at the beginning of the 90s. These choices were deliberate, since the "right" policies (in primis the resolution of the banking crisis) presented unbearable political costs, not only for the ruling parties, but also for the bureaucratic and business elites. The misfortunes of the Japanese economy during the long recession not only allow us to draw important economic policy lessons, but also stimulate reflections on the disruptive role on economic policies caused by powerful vested interests when an economy needs broad and deep structural changes. The final part of the paper focuses on ways to tackle Japan's banking crisis. In particular, it explores the Scandinavian solution, which, mutatis mutandis, might serve Japanese policy-makers well.

Compositional Data Analysis with R

R from http://www.r-project.org/ is ‘GNU S’ – a language and environment for statistical computing and graphics. The environment in which many classical and modern statistical techniques have been implemented, but many are supplied as packages. There are 8 standard packages and many more are available through the cran family of Internet sites http://cran.r-project.org . We started to develop a library of functions in R to support the analysis of mixtures and our goal is a MixeR package for compositional data analysis that provides support for operations on compositions: perturbation and power multiplication, subcomposition with or without residuals, centering of the data, computing Aitchison’s, Euclidean, Bhattacharyya distances, compositional Kullback-Leibler divergence etc. graphical presentation of compositions in ternary diagrams and tetrahedrons with additional features: barycenter, geometric mean of the data set, the percentiles lines, marking and coloring of subsets of the data set, theirs geometric means, notation of individual data in the set . . . dealing with zeros and missing values in compositional data sets with R procedures for simple and multiplicative replacement strategy, the time series analysis of compositional data. We’ll present the current status of MixeR development and illustrate its use on selected data sets

New Features of CoDaPack. An Userfriendly Compositional Data Package

The statistical analysis of compositional data is commonly used in geological studies. As is well-known, compositions should be treated using logratios of parts, which are difficult to use correctly in standard statistical packages. In this paper we describe the new features of our freeware package, named CoDaPack, which implements most of the basic statistical methods suitable for compositional data. An example using real data is presented to illustrate the use of the package

CODAPACK3D. A new version of Compositional Data Package

The statistical analysis of compositional data should be treated using logratios of parts, which are difficult to use correctly in standard statistical packages. For this reason a freeware package, named CoDaPack was created. This software implements most of the basic statistical methods suitable for compositional data. In this paper we describe the new version of the package that now is called CoDaPack3D. It is developed in Visual Basic for applications (associated with Excel©), Visual Basic and Open GL, and it is oriented towards users with a minimum knowledge of computers with the aim at being simple and easy to use. This new version includes new graphical output in 2D and 3D. These outputs could be zoomed and, in 3D, rotated. Also a customization menu is included and outputs could be saved in jpeg format. Also this new version includes an interactive help and all dialog windows have been improved in order to facilitate its use. To use CoDaPack one has to access Excel© and introduce the data in a standard spreadsheet. These should be organized as a matrix where Excel© rows correspond to the observations and columns to the parts. The user executes macros that return numerical or graphical results. There are two kinds of numerical results: new variables and descriptive statistics, and both appear on the same sheet. Graphical output appears in independent windows. In the present version there are 8 menus, with a total of 38 submenus which, after some dialogue, directly call the corresponding macro. The dialogues ask the user to input variables and further parameters needed, as well as where to put these results. The web site http://ima.udg.es/CoDaPack contains this freeware package and only Microsoft Excel© under Microsoft Windows© is required to run the software. Kew words: Compositional data Analysis, Software

Sistema multimodal para la planificación de viajes en transportes públicos de código abierto y basado en estándares 'de facto' = A multimodal journey planner based on open source software and 'de facto' standards

Este artículo muestra cómo con bajo coste y riesgo se puede desarrollar un sistema de planificación de viaje multimodal, basado en un enfoque de código abierto y estándares ‘de facto’. Se ha desarrollado completamente una solución de código abierto para un sistema de información de transporte público puerta a puerta basado en estándares ‘de facto’. El cálculo de rutas se realiza mediante Graphserver, mientras que la cartografía se basa en OpenStreetMap. También se ha demostrado cómo exportar una base de datos real de horarios de transporte público como la del operador ETM (Empresa de Transporte Metropolitano de València) a la especificación de Google Transit, para permitir el cálculo de rutas, tanto desde nuestro prototipo como desde Google Transit

Multimedia Training Videos

Multimedia Training Videos is a series of free learning videos to show anyone interested in learning packages like Flash, Director and Photoshop.

Wiki Software Comparison (eHandbook)

Comparison of brand-leading 'Wiki' sofware packages with respect to implementation of Wiki-style electronic resource for handbooks.

SAP: Ensamblado a la medida de GM Colmotores

Los sistemas y las tecnologías de información son un elemento vital de las organizaciones exitosas. Por eso constituyen un área esencial de estudio en la administración y dirección de un negocio. Actualmente, la investigación sobre la TI y el desempeño de negocios ha descubierto que cuanto más tenga éxito una empresa para alinear la tecnología de la información con sus objetivos de negocios, mayor será su rentabilidad, y solo una cuarta parte de las empresas logran una alineación entre la TI y los negocios (Luffman, 2003) Esta fuerte tendencia ha tenido un auge interesante en compañías colombianas de todos los tamaños y sectores de la economía; por esta razón hemos buscado abordar una compañía colombiana de talla internacional para describir el proceso de implementación de su sistema de gestión de recursos empresariales (ERP) SAP ECC y su integración dentro de General Motors Colmotores; principalmente con el fin de realizar un análisis del uso que la compañía le está dando a los principales módulos y sub-módulos de contabilidad, ventas y compras de SAP. Este proyecto es muy pertinente especialmente para todos aquellos estudiantes e interesados en el uso y aprovechamiento de los sistemas de información de una compañía, por lo cual se sintetizara la experiencia durante su preparación para la implementación, el desarrollo de la misma y los principales resultados, percibidos por los empleados directamente involucrados, los cuales serán abordados por medio de visitas programadas y entrevistas a profundidad; esto facilitara y permitirá evidenciar de cerca la realidad de la compañía General Motors Colmotores con SAP.