Quality of papaya hybrid grown under different irrigation depths

Irrigation is a practice widely used in fruit production in the Brazilian Northeast region, including in the papaya crop in order to increase their productivity. For the purpose of knowing the productive potential of papaya hybrid irrigated, an experiment was carried out in order to evaluate the performance of a papaya hybrid under different irrigations depths. Four irrigation depths (50, 75, 100 and 125% of ETo) were tested and the reference evapotranspiration was calculated by the Penman-Monteith model. The hybrid papaya used was UENF/Caliman 01, which was planted in single rows, spaced 4 x 2m from each other, and irrigated by dripping. The experimental design in randomized blocks was used with six replications and three plants per plot. The following variables were evaluated: transversal diameter, longitudinal diameter, pulp thickness, external and internal appearances, soluble solids, titratable acidity, pulp pH and soluble solids/titratable acidity relation. The higher transversal and longitudinal diameters of the fruit were obtained applying an irrigation depth of about 108% of evapotranspiration. The UENF/Caliman 01 hybrid can be cultivated in the semiarid region of the State of Paraiba, Brazil, with replacement rate of 100% ETo, without compromising the quality of the fruits.

Incidence of deep vein thrombosis and quality of venous thromboembolism prophylaxis

OBJECTIVE: to determine the incidence of deep vein thrombosis and prophylaxis quality in hospitalized patients undergoing vascular and orthopedic surgical procedures. METHODS: we evaluated 296 patients, whose incidence of deep venous thrombosis was studied by vascular ultrasonography. Risk factors for venous thrombosis were stratified according the Caprini model. To assess the quality of prophylaxis we compared the adopted measures with the prophylaxis guidelines of the American College of Chest Physicians. RESULTS: the overall incidence of deep venous thrombosis was 7.5%. As for the risk groups, 10.8% were considered low risk, 14.9%moderate risk, 24.3% high risk and 50.5% very high risk. Prophylaxis of deep venous thrombosis was correct in 57.7%. In groups of high and very high risk, adequate prophylaxis rates were 72.2% and 71.6%, respectively. Excessive use of chemoprophylaxis was seen in 68.7% and 61.4% in the low and moderate-risk groups, respectively. CONCLUSION: although most patients are deemed to be at high and very high risk for deep vein thrombosis, deficiency in the application of prophylaxis persists in medical practice.

Fatigue and quality of life in breast cancer survivors: a comparative study

PURPOSE: To assess fatigue and quality of life in disease-free breast cancer survivors in relation to a sample of age-matched women with no cancer history and to explore the relationship between fatigue and quality of life.METHODS: A cross-sectional study was conducted in a sample of 202 consecutive disease-free Brazilian breast cancer survivors, all of whom had completed treatment, treated at 2 large hospitals. The patients were compared to age-matched women with no cancer history attending a primary health care center. The Piper Fatigue Scale-Revised and the World Health Organization Quality of Life Instrument (WHOQOL-BREF) were used to measure the fatigue and quality of life, respectively. Socio-demographic and clinical variables were also obtained. The χ2 test, generalized linear model, and Spearman correlation coefficient were used for statistical purposes. The adopted level of significance was 5%.RESULTS: Breast cancer survivors experienced significantly greater total and subscale fatigue scores than comparison group (all p-values<0.05). In addition, survivors reported a poorer quality of life in physical (p=0.002), psychological (p=0.03), and social relationships (p=0.03) domains than comparison group. No difference was found for the environmental domain (p=0.08) for both groups. For survivors of breast cancer and for comparison group, the total and subscale fatigue scores were related to lower quality of life (all p-values<0.01).CONCLUSION: The findings of this study highlight the importance of assessing fatigue and quality of life in breast cancer survivors.

The Effects of Service Quality, Customer Satisfaction and Customer Perceived Value on Behavioral Intentions

The intent of this research was to develop a model that describes the extent to which customer behavioral intentions are influenced by service quality, customer satisfaction and customer perceived value in the business-to-business service context. Research on customer behavioral intentions is quite fragmented and no generalized model has been presented. Thus, there was need for empirical testing. This study builds on the services marketing theory and assesses the relationships between the identified constructs. The data for the empirical analysis was collected via a quantitative online survey and a total of 226 usable responses were obtained for further analysis. The model was tested in an employment agency service setting. The measures used in this survey were first assessed by using confirmatory factor analysis (CFA) after which the hypothesized relationships were further verified using structural equation modeling (SEM) in LISREL 8.80. The analysis identified that customer satisfaction played a pivotal role in the model as it was the only direct antecedent of customer behavioral intentions, however, customer perceived value showed a strong indirect impact on buying intentions via customer satisfaction. In contrast to what was hypothesized, service quality and customer perceived value did not have a direct positive effect on behavioral intentions. Also, a contradicting finding with current literature was that sacrifice was argued to have a direct but positive impact on customer perceived value. Based on the findings in this study, managers should carefully think of their service strategies that lead to their customers’ favorable behavioral intentions.

Breed and season influence on milk quality parameters and in mastitis occurrence

The aims of the present study were to evaluate the performance of Jersey and Holstein cows under different rainfall conditions (dry and rainy seasons) by monitoring aspects related to subclinical mastitis (somatic cell count, microbiological isolation, type of isolated pathogen), milk quality (lactose, protein, fat, total solids) and production (mean milk production) of both breeds. The study was carried out in a dairy farm located in the state of São Paulo, Brazil. Eight visitations were done to the farm, four in a period of high rainfall and four in a period of low rainfall. Milk samples were collected from 79 Holstein cows and 37 Jersey cows for electronic somatic cell count and determination of the main milk components (protein, fat, total solids, lactose). Milk fat, protein, total solids and production were influenced by breed and the season, with similar tendencies for both breeds in both seasons. Somatic cell count (SCC) showed similar results for both breeds. Holstein cows with intramammary infections (IMI) presented a higher increase in SCC when compared to Jersey cows (P<0.001). In the dry season, 53 animals had IMI in at least one month during the study, which 32 were Holstein and 21 were Jersey cows. In the rainy season, 65 animals had intramammary infection, being 43 Holstein and 22 Jersey cows. The frequency of IMI cases was larger in the rainy season than in the dry season. Jersey cows had a lower chance of showing IMI signs and symptoms than Holstein cows in the rainy season (odds ratio=0.52). The larger number of IMI cases in the rainy season may have led to a lower milk lactose rate for both breeds, thus milk lactose rate can be considered an indicator of IMI status. There was prevalence of contagious pathogens overall in the study. The applied model showed that environmental pathogens were more frequently isolated from the breed Jersey, regardless of the study season. There seems to be differences in the immune response of Jersey and Holstein breeds.

Microbusiness: A new social business model to alleviate poverty in developing countries?

Poverty alleviation views have shifted from seeing the poor as victims or as potential consumers, to seeing them as gainers. Social businesses include microfinancing and microfranchising, which engage people at the bottom of the pyramid using business instead of charity. There are, however, social business firms that do not fit to the existing social business model theory. These firms provide markets to poor producers and mix traditional, local craftsmanship with western design. Social business models evolve faster than the academic literature can study them. This study contributes to filling this gap. The purpose of this Master’s thesis is to develop the concept of social business as poverty alleviation method in developing countries. It also aims; 1) to describe the means for poverty alleviation in developing countries; 2) to introduce microbusiness as a social business model; and 3) to examine the challenges of microbusinesses. Qualitative case study is used as a research strategy and theme interviews as a data collecting method. The empirical data is gathered from four interviews of Finnish or Finnish-owned firms that employ microbusiness – Mifuko, Tensira, Mangomaa and Tikau – and this is supported with secondary data including articles on case companies. The results show that microbusiness is a valid new social business model that aims at poverty alleviation by engaging the poor at the bottom of the pyramid. It is possible to map the value proposition, value constellation, and economic and social profit equations of the case firms. Two major types of firms emerge from the results; the first consists of design-oriented firms that emphasize the quality and design of the products, and the second consists of bazaar-like firms whose product portfolio is less sophisticated and who promote more the stories of the products – not the design. All microbusiness firms provide markets, promote traditional handicrafts, form close relationships to their producers, and aim at enhancing lives through their businesses. The attitudes towards social businesses are sometimes negative, but this is changing for the better. In conclusion, microbusiness answers to two different needs at the same time – consumers’ needs for ethical products and the social needs of the producers – but the social need is the ultimate reason why the entrepreneurs started business. Microbusiness continues as a poverty alleviation tool that sees the poor as gainers; by providing them steady employment, microbusiness increases the poor’s self-esteem and enables them for a better living. Academic literature has not been able to offer enough alternative business models to cover all social businesses; the current study contributes to this by concluding that microbusiness is another social business model.

Licensing Model Development for Small Modular Reactors (SMRs) - Focusing on the Finnish Regulatory Framework

Recently, Small Modular Reactors (SMRs) have attracted increased public discussion. While large nuclear power plant new build projects are facing challenges, the focus of attention is turning to small modular reactors. One particular project challenge arises in the area of nuclear licensing, which plays a significant role in new build projects affecting their quality as well as costs and schedules. This dissertation - positioned in the field of nuclear engineering but also with a significant section in the field of systems engineering - examines the nuclear licensing processes and their suitability for the characteristics of SMRs. The study investigates the licensing processes in selected countries, as well as other safety critical industry fields. Viewing the licensing processes and their separate licensing steps in terms of SMRs, the study adopts two different analysis theories for review and comparison. The primary data consists of a literature review, semi-structured interviews, and questionnaire responses concerning licensing processes and practices. The result of the study is a recommendation for a new, optimized licensing process for SMRs. The most important SMR-specific feature, in terms of licensing, is the modularity of the design. Here the modularity indicates multi-module SMR designs, which creates new challenges in the licensing process. As this study focuses on Finland, the main features of the new licensing process are adapted to the current Finnish licensing process, aiming to achieve the main benefits with minimal modifications to the current process. The application of the new licensing process is developed using Systems Engineering, Requirements Management, and Project Management practices and tools. Nuclear licensing includes a large amount of data and documentation which needs to be managed in a suitable manner throughout the new build project and then during the whole life cycle of the nuclear power plant. To enable a smooth licensing process and therefore ensure the success of the new build nuclear power plant project, management processes and practices play a significant role. This study contributes to the theoretical understanding of how licensing processes are structured and how they are put into action in practice. The findings clarify the suitability of different licensing processes and their selected licensing steps for SMR licensing. The results combine the most suitable licensing steps into a new licensing process for SMRs. The results are also extended to the concept of licensing management practices and tools.

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance

Enabling Change in Universities: Enhancing Education for Sustainable Development with Tools for Quality Assurance This thesis deals with enabling change in universities, more explicitly enhancing education for sustainable development with tools for quality assurance. Change management is a discipline within management that was developed in the 1980s because business changed from being predictable to unpredictable. The PEST mnemonic is a method to categorize factors enabling change; such as political, economic, socio-cultural and technological factors, which all affect higher education. A classification of a change, in either hard or soft, can help understanding the type of change that an organization is facing. Hard changes are more applied to problems that have clear objectives and indicators, with a known cause of the problem. Soft changes are applied to larger problems that affect the entire organization or beyond it. The basic definition for sustainable development is: the future generations should have similar opportunities as the previous. The UN has set as a global goal an integration of education for sustainable development (ESD) at all levels of education during 2005- 2014. The goal is set also in universities, the graduates of which are future leaders for all labor markets. The objective for ESD in higher education is that graduates obtain the competence to take economic, social and environmental costs and benefits into account when making decisions. Knowledge outcomes should aim for systematic and holistic thinking, which requires cross disciplinary education. So far, the development of ESD has not achieved its goals. The UN has identified a need for more transdisclipnary research in ESD. A joint global requirement for universities is quality assurance, the aim of which is to secure and improve teaching and learning. Quality, environmental and integrated management systems are used by some universities for filling the quality assurance requirements. The goal of this thesis is to open up new ways for enhancing ESD in universities, beyond the forerunners; by exploring how management systems could be used as tools for promoting ESD. The thesis is based on five studies. In the first study, I focus on if and how tools for quality assurance could be benefitted for promoting ESD. It is written from a new perspective, the memetic, for reaching a diversity of faculty. A meme is an idea that diffuses from brain to brain. It can be applied for cultural evolution. It is a theory that is based on the evolutionary theory by Darwin, applied for social sciences. In the second Paper, I present the results from the development of the pilot process model for enhancing ESD with management systems. The development of the model is based on a study that includes earlier studies, a survey in academia and an analysis of the practice in 11 universities in the Nordic countries. In the third study, I explore if the change depends on national culture or if it is global. It is a comparative study on both policy and implementation level, between the Nordic countries and China. The fourth study is a single case study based on change management. In this study, I identify what to consider in order to enable the change: enhancing ESD with tools for quality assurance in universities. In the fifth Paper, I present the results of the process model for enhancing ESD with management systems. The model was compared with identified drivers and barriers for enhancing ESD and for implementing management systems. Finally, the process model was piloted and applied for identifying sustainability aspects in curricula. Action research was chosen as methodology because there are not already implemented approaches using quality management for promoting ESD, why the only way to study this is to make it happen. Another reason for choosing action research is since it is essential to involve students and faculty for enhancing ESD. Action based research consists of the following phases: a) diagnosing, b) planning action, c) taking action and d) evaluating action. This research was made possible by a project called Education for Sustainable Development in Academia in the Nordic countries, ESDAN, in which activities were divided into these four phases. Each phase ended with an open seminar, where the results of the study were presented. The objective for the research project was to develop a process for including knowledge in sustainable development in curricula, which could be used in the quality assurance work. Eleven universities from the Nordic countries cooperated in the project. The aim was, by applying the process, to identify and publish examples of relevant sustainability aspects in different degree programs in universities in the Nordic countries. The project was partly financed by the Nordic Council of Ministers and partly by the participating pilot universities. Based on the results of my studies, I consider that quality, environmental and integrated management systems can be used for promoting ESD in universities. Relevant sustainability aspects have been identified in different fields of studies by applying the final process model. The final process model was compared with drivers and barriers for enhancing ESD and for implementing management systems in universities and with succeeding with management systems in industry. It corresponds with these, meaning that drivers are taken into account and barriers tackled. Both ESD and management systems in universities could be considered successful memes, which can reflect an effective way of communication among individuals. I have identified that management systems could be used as tools for hard changes and to support the soft change of enhancing ESD in universities with management system. Based on the change management study I have summarized recommendations on what to consider in order to enable the studied change. The main practical implications of the results are that the process model could be applied for assessment, benchmarking and communication of ESD, connected to quality assurance, when applied. This is possible because the information can be assembled in one picture, which facilitates comparison. The memetic approach can be applied for structuring. It is viable to make comparative studies between cultures, for getting insight in special characteristics of the own culture. Action based research is suitable for involving faculty. Change management can be applied for planning a change, which both enhancing ESD and developing management systems are identified to be.

QUALITY OF PROCESSING TOMATO FRUITS IN COMPETITION WITH Solanum americanum

ABSTRACT Five experiments were conducted to evaluate the hypothesis that Solanum americanum density and time of coexistence affect the quality of processing tomato fruit. The tomato crop was established using either the direct drilling or the transplanting technique. The factors evaluated consisted of weed density (from 0 up to 6 plants m-2) and time of weed interference (early bloom stage, full flowering stage, fruit filling, and harvest time). The effects of competition on tomato fruit quality were analysed using a multiple model. Tomato variables evaluated included industrial fruit types (which depended on ripeness and disease infection) and soluble solids level(obrix). Tomato fruit quality is dependent on the factors tested. Under low densities (< 6 plants m-2) of S. americanum there was a small impact on the quality of the tomato fruits. The percentage of grade A (mature fruit with red color and without pathogen infection) tomato fruits is the variable most affect by the independent variables. The impact of these independent variables on the percentage of grade C (green and/or with more than 15% disease infection) tomato yield was of smaller magnitude and in an inverse trend as the observed for grade A. The level of soluble solids was influenced by the weed interference on only two experiments, but the impact was of small magnitude. The impact of the results on current and future crop management practices is discussed.

A Model for Integrating the Publication and Preservation of Journal Articles

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A Business continuity management maturity model : the search for an ISO 22301 Compliant BCM Maturity model

BCM (business continuity Management) is a holistic management process aiming at ensuring business continuity and building organizational resilience. Maturity models offer organizations a tool for evaluating their current maturity in a certain process. In the recent years BCM has been subject to international ISO standardization, while the interest of organizations to bechmark their state of BCM agains standards and the use of maturity models for these asessments has increased. However, although new standards have been introduced, very little attention has been paid to reviewing the existing BCM maturity models in research - especially in the light of the new ISO 22301 standard for BCM. In this thesis the existing BCM maturily models are carefully evaluated to determine whetherthey could be improved. In order to accomplish this, the compliance of the existing models to the ISO 22301 standard is measured and a framework for assessing a maturitymodel´s quality is defined. After carefully evaluating the existing frameworks for maturity model development and evaluation, an approach suggested by Becker et al. (2009) was chosen as the basis for the research. An additionto the procedural model a set of seven research guidelines proposed by the same authors was applied, drawing on the design-science research guidelines as suggested by Hevner et al. (2004). Furthermore, the existing models´ form and function was evaluated to address their usability. Based on the evaluation of the existing BCM maturity models, the existing models were found to have shortcomings in each dimension of the evaluation. Utilizing the best of the existing models, a draft version for an enhanced model was developed. This draft model was then iteratively developed by conducting six semi-structured interviews with BCM professionals in finland with the aim of validating and improving it. As a Result, a final version of the enhanced BCM maturity model was developed, conforming to the seven key clauses in the ISO 22301 standard and the maturity model development guidelines suggested by Becker et al. (2009).

The quality control of glycoprotein folding in the endoplasmic reticulum, a trip from trypanosomes to mammals

The present review deals with the stages of synthesis and processing of asparagine-linked oligosaccharides occurring in the lumen of the endoplasmic reticulum and their relationship to the acquisition by glycoproteins of their proper tertiary structures. Special emphasis is placed on reactions taking place in trypanosomatid protozoa since their study has allowed the detection of the transient glucosylation of glycoproteins catalyzed by UDP-Glc:glycoprotein glucosyltransferase and glucosidase II. The former enzyme has the unique property of covalently tagging improperly folded conformations by catalyzing the formation of protein-linked Glc1Man7GlcNAc2, Glc1Man8GlcNac2 and Glc1Man9GlcNAc2 from the unglucosylated proteins. Glucosyltransferase is a soluble protein of the endoplasmic reticulum that recognizes protein domains exposed in denatured but not in native conformations (probably hydrophobic amino acids) and the innermost N-acetylglucosamine unit that is hidden from macromolecular probes in most native glycoproteins. In vivo, the glucose units are removed by glucosidase II. The influence of oligosaccharides in glycoprotein folding is reviewed as well as the participation of endoplasmic reticulum chaperones (calnexin and calreticulin) that recognize monoglucosylated species in the same process. A model for the quality control of glycoprotein folding in the endoplasmic reticulum, i.e., the mechanism by which cells recognize the tertiary structure of glycoproteins and only allow transit to the Golgi apparatus of properly folded species, is discussed. The main elements of this control are calnexin and calreticulin as retaining components, the UDP-Glc:glycoprotein glucosyltransferase as a sensor of tertiary structures and glucosidase II as the releasing agent.

Geochemistry and water quality of Lake Qarun, Egypt

Water geochemistry is a very important tool for studying the water quality in a given area. Geology and climate are the major natural factors controlling the chemistry of most natural waters. Anthropogenic impacts are the secondary sources of contamination in natural waters. This study presents the first integrative approach to the geochemistry and water quality of surface waters and Lake Qarun in the Fayoum catchment, Egypt. Moreover, geochemical modeling of Lake Qarun was firstly presented. The Nile River is the main source of water to the Fayoum watershed. To investigate the quality and geochemistry of this water, water samples from irrigation canals, drains and Lake Qarun were collected during the period 2010‒2013 from the whole Fayoum drainage basin to address the major processes and factors governing the evolution of water chemistry in the investigation area. About 34 physicochemical quality parameters, including major ions, oxygen isotopes, trace elements, nutrients and microbiological parameters were investigated in the water samples. Multivariable statistical analysis was used to interpret the interrelationship between the different studied parameters. Geochemical modeling of Lake Qarun was carried out using Hardie and Eugster’s evolutionary model and a model simulated by PHREEQC software. The crystallization sequence during evaporation of Lake Qarun brine was also studied using a Jänecke phase diagram involving the system Na‒K‒Mg‒ Cl‒SO4‒H2O. The results show that the chemistry of surface water in the Fayoum catchment evolves from Ca- Mg-HCO3 at the head waters to Ca‒Mg‒Cl‒SO4 and eventually to Na‒Cl downstream and at Lake Qarun. The main processes behind the high levels of Na, SO4 and Cl in downstream waters and in Lake Qarun are dissolution of evaporites from Fayoum soils followed by evapoconcentration. This was confirmed by binary plots between the different ions, Piper plot, Gibb’s plot and δ18O results. The modeled data proved that Lake Qarun brine evolves from drainage waters via an evaporation‒crystallization process. Through the precipitation of calcite and gypsum, the solution should reach the final composition "Na–Mg–SO4–Cl". As simulated by PHREEQC, further evaporation of lake brine can drive halite to precipitate in the final stages of evaporation. Significantly, the crystallization sequence during evaporation of the lake brine at the concentration ponds of the Egyptian Salts and Minerals Company (EMISAL) reflected the findings from both Hardie and Eugster’s evolutionary model and the PHREEQC simulated model. After crystallization of halite at the EMISAL ponds, the crystallization sequence during evaporation of the residual brine (bittern) was investigated using a Jänecke phase diagram at 35 °C. This diagram was more useful than PHREEQC for predicting the evaporation path especially in the case of this highly concentrated brine (bittern). The predicted crystallization path using a Jänecke phase diagram at 35 °C showed that halite, hexahydrite, kainite and kieserite should appear during bittern evaporation. Yet the actual crystallized mineral salts were only halite and hexahydrite. The absence of kainite was due to its metastability while the absence of kieserite was due to opposed relative humidity. The presence of a specific MgSO4.nH2O phase in ancient evaporite deposits can be used as a paleoclimatic indicator. Evaluation of surface water quality for agricultural purposes shows that some irrigation waters and all drainage waters have high salinities and therefore cannot be used for irrigation. Waters from irrigation canals used as a drinking water supply show higher concentrations of Al and suffer from high levels of total coliform (TC), fecal coliform (FC) and fecal streptococcus (FS). These waters cannot be used for drinking or agricultural purposes without treatment, because of their high health risk. Therefore it is crucial that environmental protection agencies and the media increase public awareness of this issue, especially in rural areas.

Diastolic function is associated with quality of life and exercise capacity in stable heart failure patients with reduced ejection fraction

Exercise capacity and quality of life (QOL) are important outcome predictors in patients with systolic heart failure (HF), independent of left ventricular (LV) ejection fraction (LVEF). LV diastolic function has been shown to be a better predictor of aerobic exercise capacity in patients with systolic dysfunction and a New York Heart Association (NYHA) classification ≥II. We hypothesized that the currently used index of diastolic function E/e' is associated with exercise capacity and QOL, even in optimally treated HF patients with reduced LVEF. This prospective study included 44 consecutive patients aged 55±11 years (27 men and 17 women), with LVEF<0.50 and NYHA functional class I-III, receiving optimal pharmacological treatment and in a stable clinical condition, as shown by the absence of dyspnea exacerbation for at least 3 months. All patients had conventional transthoracic echocardiography and answered the Minnesota Living with HF Questionnaire, followed by the 6-min walk test (6MWT). In a multivariable model with 6MWT as the dependent variable, age and E/e' explained 27% of the walked distance in 6MWT (P=0.002; multivariate regression analysis). No association was found between walk distance and LVEF or mitral annulus systolic velocity. Only normalized left atrium volume, a sensitive index of diastolic function, was associated with decreased QOL. Despite the small number of patients included, this study offers evidence that diastolic function is associated with physical capacity and QOL and should be considered along with ejection fraction in patients with compensated systolic HF.

Alternative chromatographic system for the quality control of lipophilic technetium-99m radiopharmaceuticals such as [99mTc(MIBI)6]+

Knowledge of the radiochemical purity of radiopharmaceuticals is mandatory and can be evaluated by several methods and techniques. Planar chromatography is the technique normally employed in nuclear medicine since it is simple, rapid and usually of low cost. There is no standard system for the chromatographic technique, but price, separation efficiency and short time for execution must be considered. We have studied an alternative system using common chromatographic stationary phase and alcohol or alcohol:chloroform mixtures as the mobile phase, using the lipophilic radiopharmaceutical [99mTc(MIBI)6]+ as a model. Whatman 1 modified phase paper and absolute ethanol, Whatman 1 paper and methanol:chloroform (25:75), Whatman 3MM paper and ethanol:chloroform (25:75), and the more expensive ITLC-SG and 1-propanol:chloroform (10:90) were suitable systems for the direct determination of radiochemical purity of [99mTc(MIBI)6]+ since impurities such as99mTc-reduced-hydrolyzed (RH),99mTcO4- and [99mTc(cysteine)2]-complex were completely separated from the radiopharmaceutical, which moved toward the front of chromatographic systems while impurities were retained at the origin. The time required for analysis was 4 to 15 min, which is appropriate for nuclear medicine routines.