[Book Review] Urban Maps : Instruments of Narrative and Interpretation in the City by Richard Brook and Nick Dunn, Ashgate, Farham, United Kingdom, 2011, 250pp. ISBN 978-0-754676-5-77.

Urban maps discusses new ways and tools to read and navigate the contemporary city. Each chapter investigates a possible approach to unravel the complexity of contemporary urban forms. Each tool is first defined, introducing its philosophical background, and is then discussed with case studies, showing its relevance for the navigation of the built environment. Urbanism classics such as the work of Lynch, Jacobs, Venuti and Scott-Brown, Lefebrve and Walter Benjamin are fundamental in setting the framework of the volume. In the introduction cities and mapping are first discussed, the former are illustrated as ‘a composite of invisible networks devoid of landmarks and overrun by nodes’ (p. 3), and ‘a series of unbounded spaces where mass production and mass consumption reproduce a standardised quasi-global culture’ (p. 6).

Nuclear instruments and methods in physics research section B : beam interactions with materials and atoms

The impact-induced deposition of Al13 clusters with icosahedral structure on Ni(0 0 1) surface was studied by molecular dynamics (MD) simulation using Finnis–Sinclair potentials. The incident kinetic energy (Ein) ranged from 0.01 to 30 eV per atom. The structural and dynamical properties of Al clusters on Ni surfaces were found to be strongly dependent on the impact energy. At much lower energy, the Al cluster deposited on the surface as a bulk molecule. However, the original icosahedral structure was transformed to the fcc-like one due to the interaction and the structure mismatch between the Al cluster and Ni surface. With increasing the impinging energy, the cluster was deformed severely when it contacted the substrate, and then broken up due to dense collision cascade. The cluster atoms spread on the surface at last. When the impact energy was higher than 11 eV, the defects, such as Al substitutions and Ni ejections, were observed. The simulation indicated that there exists an optimum energy range, which is suitable for Al epitaxial growth in layer by layer. In addition, at higher impinging energy, the atomic exchange between Al and Ni atoms will be favourable to surface alloying.

Development and validation of a new self-report instrument for measuring sedentary behaviors and light-intensity physical activity in adults

Background Low levels of physical activity and high levels of sedentary behavior (SB) are major public health concerns. This study was designed to develop and validate the 7-day Sedentary (S) and Light Intensity Physical Activity (LIPA) Log (7-day SLIPA Log), a self-report measure of specific daily behaviors. Method To develop the log, 62 specific SB and LIPA behaviors were chosen from the Compendium of Physical Activities. Face-to-face interviews were conducted with 32 sedentary volunteers to identify domains and behaviors of SB and LIPA. To validate the log, a further 22 sedentary adults were recruited to wear the GT3X for 7 consecutive days and nights. Results Pearson correlations (r) between the 7-day SLIPA Log and GT3X were significant for sedentary (r =.86, p < 0.001), for LIPA (r =.80, p < 0.001). Lying and sitting postures were positively correlated with GT3X output (r =.60 and r =.64, p < 0.001, respectively). No significant correlation was found for standing posture (r =.14, p = 0.53).The kappa values between the 7-day SLIPA Log and GT3X variables ranged from 0.09–0.61, indicating poor to good agreement. Conclusion The 7-day SLIPA Log is a valid self-report measure of SB and LIPA in specific behavioral domains.

Social media metrics : are we measuring business value?

Over the past few years many organizations that directly or indirectly interact with consumers have invested heavily into a social media presence. As a consequence some success indicators are openly available to users of many social media platforms, such as the number of fans (or followers, members, visitors and others) or the amount of content(tweets, images, shares or other content). Many organizations additionally track their social activities internally to understand audience reach, consumer influence, brand image, consumer preference or other key metrics that make sense for a business. However, most of the immediately available social media success metrics are activity-based and many organizations are struggling with establishing a direct relationship to business success. This paper systematically reviews some of the common social media metrics/ratings used by organisations, critically analyse its business value and identify gaps formulating research questions for empirical study and concluding with recommendations and suggestions for future research.

Measuring IS-support : a conceptual model

This paper reports on a conceptual model of a larger research effort proceeding from a central interest in the importance of assessing the IS-Support provided to key-user groups. This study conceptualised a new multidimensional IS-Support construct with four dimensions: training, documentation, assistance and authorisation, which form the overarching construct – IS-Support. We argue that a holistic measure for assessing IS-Support should consist of dimensions, and measures, that together assess the variety of the support provided to IS key-user groups. The proposed IS-Support construct is defined as the support the IS key-user groups receive to increase their capabilities in utilising information systems within the organisation. With two interrelated phases, conceptualisation phase and validation phase, to rigorously hypothesise and validate a measurement model, the IS-Support model, proposed in this study, is intended to include the characteristics of analytic theory.

Measuring the mechanical properties of ground ophthalmic polymer surfaces using nanoindentation

This work is motivated by the need to efficiently machine the edges of ophthalmic polymer lenses for mounting in spectacle or instrument frames. The polymer materials used are required to have suitable optical characteristics such high refractive index and Abbe number, combined with low density and high scratch and impact resistance. Edge surface finish is an important aesthetic consideration; its quality is governed by the material removal operation and the physical properties of the material being processed. The wear behaviour of polymer materials is not as straightforward as for other materials due to their molecular and structural complexity, not to mention their time-dependent properties. Four commercial ophthalmic polymers have been studied in this work using nanoindentation techniques which are evaluated as tools for probing surface mechanical properties in order to better understand the grinding response of polymer materials.

Practical framework for measuring performance of international construction firms

The internationalization of construction companies has become of significant interest as the global construction market continues to be integrated into a more competitive and turbulent business environment. However, due to the complicated and multifaceted nature of international business and performance, there is as yet no consensus on how to evaluate the performance of international construction firms (ICFs). The purpose of this paper, therefore, is to develop a practical framework for measuring the performance of ICFs. Based on the balanced scorecard (BSC), a framework with detailed measures is developed, investigated, and tested using a three-step research design. In the first step, 27 measures under six dimensions (financial, market, customer, internal business processes, stakeholders, and learning and growth) are determined by literature review, interviews with academics, and seminar discussions. Subsequently, a questionnaire survey is conducted to investigate weights of these 27 performance measures. The questionnaire survey also supports the importance of measuring intangible aspects of international construction performance from the practitioner’s viewpoint. Additionally, a case study is described to test the framework’s robustness and usefulness. This is achieved by benchmarking the performance of a Chinese ICF with nine other counterparts worldwide. It is found that the framework provides an effective basis for benchmarking ICFs to effectively monitor their performance and support the development of strategies for improved competitiveness in the international arena. This paper is the first attempt to present a balanced and practically tested framework for evaluating the performance of ICFs. It contributes to the practice of performance measurement and related internationalization in the construction industry in general.

Improving the statistical preparation for measuring soil N2O flux by closed chamber

Nitrous oxide emissions from soil are known to be spatially and temporally volatile. Reliable estimation of emissions over a given time and space depends on measuring with sufficient intensity but deciding on the number of measuring stations and the frequency of observation can be vexing. The question of low frequency manual observations providing comparable results to high frequency automated sampling also arises. Data collected from a replicated field experiment was intensively studied with the intention to give some statistically robust guidance on these issues. The experiment had nitrous oxide soil to air flux monitored within 10 m by 2.5 m plots by automated closed chambers under a 3 h average sampling interval and by manual static chambers under a three day average sampling interval over sixty days. Observed trends in flux over time by the static chambers were mostly within the auto chamber bounds of experimental error. Cumulated nitrous oxide emissions as measured by each system were also within error bounds. Under the temporal response pattern in this experiment, no significant loss of information was observed after culling the data to simulate results under various low frequency scenarios. Within the confines of this experiment observations from the manual chambers were not spatially correlated above distances of 1 m. Statistical power was therefore found to improve due to increased replicates per treatment or chambers per replicate. Careful after action review of experimental data can deliver savings for future work.

Validating SMPS-measured size distribution of double-mode spherical Silica nanoparticles by Transmission Electron Microscope (TEM)

A nanoparticles size is one of their key physical characteristics that can affect their fate in a human’s respiratory tract (in case of inhalation) and also in the environment. Hence, measuring the size distribution of nanoparticles is absolutely essential and contributes greatly to their characterization. For years, Scanning Mobility Particle Sizers (SMPS), which rely on measuring the electrical mobility diameter of particles, have been used as one of the most reliable real-time instruments for the size distribution measurement of nanoparticles. Despite its benefits, this instrument has some drawbacks, including equivalency problems for non-spherical particles (i.e. assuming a non-spherical particle is equal to a spherical particle of diameter d due to the same electrical mobility), as well as limitations in terms of its use in workplaces, because of its large size and the complexity of its operation...

Metrological performances of a diffusion charger particle counter for personal monitoring

Airborne particles have been shown to be associated with a wide range of adverse health effects, which has led to a recent increase in medical research to gain better insight into their health effects. However, accurate evaluation of the exposure-dose-response relationship is highly dependent on the ability to track actual exposure levels of people to airborne particles. This is quite a complex task, particularly in relation to submicrometer and ultrafine particles, which can vary quite significantly in terms of particle surface area and number concentrations. Therefore, suitable monitors that can be worn for measuring personal exposure to these particles are needed. This paper presents an evaluation of the metrological performance of six diffusion charger sensors, NanoTracer (Philips Aerasense) monitors, when measuring particle number and surface area concentrations, as well as particle number distribution mean when compared to reference instruments. Tests in the laboratory (by generating monodisperse and polydisperse aerosols) and in the field (using natural ambient particles) were designed to evaluate the response of these devices under both steady-state and dynamics conditions. Results showed that the NanoTracers performed well when measuring steady state aerosols, however they strongly underestimated actual concentrations during dynamic response testing. The field experiments also showed that, when the majority of the particles were smaller than 20 nm, which occurs during particle formation events in the atmosphere, the NanoTracer underestimated number concentration quite significantly. Even though the NanoTracer can be used for personal monitoring of exposure to ultrafine particles, it also has limitations which need to be considered in order to provide meaningful results.

Understanding and measuring information security culture in developing countries : case of Saudi Arabia

The purpose of the current study was to develop a measurement of information security culture in developing countries such as Saudi Arabia. In order to achieve this goal, the study commenced with a comprehensive review of the literature, the outcome being the development of a conceptual model as a reference base. The literature review revealed a lack of academic and professional research into information security culture in developing countries and more specifically in Saudi Arabia. Given the increasing importance and significant investment developing countries are making in information technology, there is a clear need to investigate information security culture from developing countries perspective such as Saudi Arabia. Furthermore, our analysis indicated a lack of clear conceptualization and distinction between factors that constitute information security culture and factors that influence information security culture. Our research aims to fill this gap by developing and validating a measurement model of information security culture, as well as developing initial understanding of factors that influence security culture. A sequential mixed method consisting of a qualitative phase to explore the conceptualisation of information security culture, and a quantitative phase to validate the model is adopted for this research. In the qualitative phase, eight interviews with information security experts in eight different Saudi organisations were conducted, revealing that security culture can be constituted as reflection of security awareness, security compliance and security ownership. Additionally, the qualitative interviews have revealed that factors that influence security culture are top management involvement, policy enforcement, policy maintenance, training and ethical conduct policies. These factors were confirmed by the literature review as being critical and important for the creation of security culture and formed the basis for our initial information security culture model, which was operationalised and tested in different Saudi Arabian organisations. Using data from two hundred and fifty-four valid responses, we demonstrated the validity and reliability of the information security culture model through Exploratory Factor Analysis (EFA), followed by Confirmatory Factor Analysis (CFA.) In addition, using Structural Equation Modelling (SEM) we were further able to demonstrate the validity of the model in a nomological net, as well as provide some preliminary findings on the factors that influence information security culture. The current study contributes to the existing body of knowledge in two major ways: firstly, it develops an information security culture measurement model; secondly, it presents empirical evidence for the nomological validity for the security culture measurement model and discovery of factors that influence information security culture. The current study also indicates possible future related research needs.

Measuring the burden of disease in Shandong province : an adoption of the disability-adjusted life year [应用伤残调整寿命年测量山东省居民疾病负担]

Objective To estimate the burden of diseases in Shandong province by the means of DALY (Disability- adjusted life year) thus to investigate the key public health problems referencing for health policy making. Methods DALYs were calculated following the procedures developed for the Global Burden of Disease (GBD) study to ensure comparability. We measured YLLs using the mortality data of 19 Disease Surveillance Points (DSPs) in Shandong Province during 2000 and 2005. YLDs were estimated based on data for WPRO in the 2002 GBD study published by WHO. Results During this period, the average DALYs loss by all causes for the residents of DSPs in Shandong was 149.74 per thousand persons each year. Noncommunicable diseases accounted for 76.63% of the disability adjusted life years, communicable diseases and other disorders represented 14.13%, and injuries 9.24%. Nearly half of the DALYs (45%) happened among the elderly (60+). Malignant neoplasm was the number one cause of DALYs loss in the male, followed by neuropsychiatric disorder, injury, cerebrovascular disease, heart disease，etc. However, neuropsychiatric disorder possessed the largest single contributor to DALY in the female and followed by heart disease, malignant neoplasm, cerebrovascular disease and respiratory disease. Conclusion Non-communicable diseases such as circulatory diseases, neuropsychiatric disorders and malignant neoplasms were the main causes of disease burden in Shandong province. The importance of neuropsychiatric disorders was more striking and should be recognized properly. The lack of morbidity data is the main limitation of this study. Abstract in Chinese 目的 应用伤残调整寿命年测量山东省居民疾病负担,提出该地区主要卫生问题,为卫生决策提供科学依据. 方法 以山东省2000-2005年19个疾病监测点的死因监测资料为基础,利用世界卫生组织(WHO)提供的方法计算不同疾病在不同性别年龄人群所造成的伤残调整寿命年(DALYs),其中,YIJDs根据WHO公布的亚太区2002年疾病负担数据进行估算. 结果 2000-2005年山东省疾病监测系统居民因为早死和残疾年平均损失149.74个DALYs/千人,其中,76.6%的DALYs损失因慢性非传染性疾病所致,14.1%由传染性疾病等引起,9.2%因为意外伤害造成;接近1/2(45%)的DALYs损失发生在60岁以上人群;恶性肿瘤为造成男性居民DALYs损失的首位原因,其次为精神行为疾患、意外伤害、脑血管病和心脏病等,女性居民则以精神行为疾患为DALYs首位原因,其次为心脏病、恶性肿瘤、脑血管病和呼吸系统疾病. 结论 以循环系统疾病、精神行为疾惠和恶性肿瘤为首的慢性非传染性疾病为造成山东省疾病负担DALYs损失的主要原因.对于精神行为疾患的重要性的认识有待于进一步提高,研究的主要局限性在于发病率资料的缺乏.

Beginning inference in fourth grade : exploring variation in measurement

This paper addresses one of the foundational components of beginning infernce, namely variation, with 5 classes of Year 4 students undertaking a measurement activity using scaled instruments in two contexts: all students measuring one person's arm span and recording the values obtained, and each student having his/her own arm span measured and recorded. The results included documentation of students' explicit appreciation of the variety of ways in which varitation can occur, including outliers, and their ability to create and describe valid representations of their data.

Methodology for measuring the vertical displacements of bridges using fibre bragg grating sensors

In many bridges, vertical displacements are one of the most relevant parameters for structural health monitoring in both the short- and long-terms. Bridge managers around the globe are always looking for a simple way to measure vertical displacements of bridges. However, it is difficult to carry out such measurements. On the other hand, in recent years, with the advancement of fibre-optic technologies, fibre Bragg grating (FBG) sensors are more commonly used in structural health monitoring due to their outstanding advantages including multiplexing capability, immunity of electromagnetic interference as well as high resolution and accuracy. For these reasons, a methodology for measuring the vertical displacements of bridges using FBG sensors is proposed. The methodology includes two approaches. One of which is based on curvature measurements while the other utilises inclination measurements from successfully developed FBG tilt sensors. A series of simulation tests of a full-scale bridge was conducted. It shows that both approaches can be implemented to measure the vertical displacements for bridges with various support conditions, varying stiffness along the spans and without any prior known loading. A static loading beam test with increasing loads at the mid-span and a beam test with different loading locations were conducted to measure vertical displacements using FBG strain sensors and tilt sensors. The results show that the approaches can successfully measure vertical displacements.